Merge tag 'pwm/for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "The patches for this release cycle include various enhancements
  (device tree support, better compile coverage, ...) for existing
  drivers.  There is a new driver for Atmel SoCs.

  Various drivers as well as the sysfs support received minor fixes and
  cleanups"

* tag 'pwm/for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: tiecap: Remove duplicate put_sync call
  pwm: tiehrpwm: use dev_err() instead of pr_err()
  pwm: pxa: remove unnecessary space before tabs
  pwm: ep93xx: split module author names
  pwm: use seq_puts() instead of seq_printf()
  pwm: atmel-pwm: Do not unprepare clock after successful registration
  of: Add Atmel PWM controller device tree binding
  pwm: atmel-pwm: Add Atmel PWM controller driver
  backlight: pwm_bl: Remove error message upon devm_kzalloc() failure
  pwm: pca9685: depends on I2C rather than REGMAP_I2C
  pwm: renesas-tpu: Enable driver compilation with COMPILE_TEST
  pwm: jz4740: Use devm_clk_get()
  pwm: jz4740: Pass device to clk_get()
  pwm: sysfs: Convert to use ATTRIBUTE_GROUPS macro
  pwm: pxa: Add device tree support

13 files changed, 537 insertions, 39 deletions

diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
new file mode 100644
index 0000000..02331b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
@@ -0,0 +1,33 @@
+Atmel PWM controller
+
+Required properties:
+  - compatible: should be one of:
+    - "atmel,at91sam9rl-pwm"
+    - "atmel,sama5d3-pwm"
+  - reg: physical base address and length of the controller's registers
+  - #pwm-cells: Should be 3. See pwm.txt in this directory for a
+    description of the cells format.
+
+Example:
+
+	pwm0: pwm@f8034000 {
+		compatible = "atmel,at91sam9rl-pwm";
+		reg = <0xf8034000 0x400>;
+		#pwm-cells = <3>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		d1 {
+			label = "d1";
+			pwms = <&pwm0 3 5000 0>
+			max-brightness = <255>;
+		};
+
+		d2 {
+			label = "d2";
+			pwms = <&pwm0 1 5000 1>
+			max-brightness = <255>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
new file mode 100644
index 0000000..5ae9f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
@@ -0,0 +1,30 @@
+Marvell PWM controller
+
+Required properties:
+- compatible: should be one or more of:
+  - "marvell,pxa250-pwm"
+  - "marvell,pxa270-pwm"
+  - "marvell,pxa168-pwm"
+  - "marvell,pxa910-pwm"
+- reg: Physical base address and length of the registers used by the PWM channel
+  Note that one device instance must be created for each PWM that is used, so the
+  length covers only the register window for one PWM output, not that of the
+  entire PWM controller.  Currently length is 0x10 for all supported devices.
+- #pwm-cells: Should be 1.  This cell is used to specify the period in
+  nanoseconds.
+
+Example PWM device node:
+
+pwm0: pwm@40b00000 {
+	compatible = "marvell,pxa250-pwm";
+	reg = <0x40b00000 0x10>;
+	#pwm-cells = <1>;
+};
+
+Example PWM client node:
+
+backlight {
+	compatible = "pwm-backlight";
+	pwms = <&pwm0 5000000>;
+	...
+}
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 7acab93..22f2f28 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -41,6 +41,15 @@ config PWM_AB8500
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-ab8500.
 
+config PWM_ATMEL
+	tristate "Atmel PWM support"
+	depends on ARCH_AT91
+	help
+	  Generic PWM framework driver for Atmel SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel.
+
 config PWM_ATMEL_TCB
 	tristate "Atmel TC Block PWM support"
 	depends on ATMEL_TCLIB && OF
@@ -122,7 +131,8 @@ config PWM_MXS
 
 config PWM_PCA9685
 	tristate "NXP PCA9685 PWM driver"
-	depends on OF && REGMAP_I2C
+	depends on OF && I2C
+	select REGMAP_I2C
 	help
 	  Generic PWM framework driver for NXP PCA9685 LED controller.
 
@@ -149,7 +159,7 @@ config PWM_PXA
 
 config PWM_RENESAS_TPU
 	tristate "Renesas TPU PWM support"
-	depends on ARCH_SHMOBILE
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  This driver exposes the Timer Pulse Unit (TPU) PWM controller found
 	  in Renesas chips through the PWM API.
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 4abf337..d8906ec 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
 obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
+obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
 obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 2ca9504..a804713 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -808,12 +808,12 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
 		seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label);
 
 		if (test_bit(PWMF_REQUESTED, &pwm->flags))
-			seq_printf(s, " requested");
+			seq_puts(s, " requested");
 
 		if (test_bit(PWMF_ENABLED, &pwm->flags))
-			seq_printf(s, " enabled");
+			seq_puts(s, " enabled");
 
-		seq_printf(s, "\n");
+		seq_puts(s, "\n");
 	}
 }
 
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
new file mode 100644
index 0000000..bf4144a
--- /dev/null
+++ b/drivers/pwm/pwm-atmel.c
@@ -0,0 +1,395 @@
+/*
+ * Driver for Atmel Pulse Width Modulation Controller
+ *
+ * Copyright (C) 2013 Atmel Corporation
+ *		 Bo Shen <voice.shen@atmel.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+/* The following is global registers for PWM controller */
+#define PWM_ENA			0x04
+#define PWM_DIS			0x08
+#define PWM_SR			0x0C
+/* Bit field in SR */
+#define PWM_SR_ALL_CH_ON	0x0F
+
+/* The following register is PWM channel related registers */
+#define PWM_CH_REG_OFFSET	0x200
+#define PWM_CH_REG_SIZE		0x20
+
+#define PWM_CMR			0x0
+/* Bit field in CMR */
+#define PWM_CMR_CPOL		(1 << 9)
+#define PWM_CMR_UPD_CDTY	(1 << 10)
+
+/* The following registers for PWM v1 */
+#define PWMV1_CDTY		0x04
+#define PWMV1_CPRD		0x08
+#define PWMV1_CUPD		0x10
+
+/* The following registers for PWM v2 */
+#define PWMV2_CDTY		0x04
+#define PWMV2_CDTYUPD		0x08
+#define PWMV2_CPRD		0x0C
+#define PWMV2_CPRDUPD		0x10
+
+/*
+ * Max value for duty and period
+ *
+ * Although the duty and period register is 32 bit,
+ * however only the LSB 16 bits are significant.
+ */
+#define PWM_MAX_DTY		0xFFFF
+#define PWM_MAX_PRD		0xFFFF
+#define PRD_MAX_PRES		10
+
+struct atmel_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+
+	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
+		       unsigned long dty, unsigned long prd);
+};
+
+static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_pwm_chip, chip);
+}
+
+static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip,
+				  unsigned long offset)
+{
+	return readl_relaxed(chip->base + offset);
+}
+
+static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip,
+				    unsigned long offset, unsigned long val)
+{
+	writel_relaxed(val, chip->base + offset);
+}
+
+static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip,
+				     unsigned int ch, unsigned long offset)
+{
+	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
+
+	return readl_relaxed(chip->base + base + offset);
+}
+
+static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
+				       unsigned int ch, unsigned long offset,
+				       unsigned long val)
+{
+	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
+
+	writel_relaxed(val, chip->base + base + offset);
+}
+
+static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	unsigned long clk_rate, prd, dty;
+	unsigned long long div;
+	unsigned int pres = 0;
+	int ret;
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
+		dev_err(chip->dev, "cannot change PWM period while enabled\n");
+		return -EBUSY;
+	}
+
+	clk_rate = clk_get_rate(atmel_pwm->clk);
+	div = clk_rate;
+
+	/* Calculate the period cycles */
+	while (div > PWM_MAX_PRD) {
+		div = clk_rate / (1 << pres);
+		div = div * period_ns;
+		/* 1/Hz = 100000000 ns */
+		do_div(div, 1000000000);
+
+		if (pres++ > PRD_MAX_PRES) {
+			dev_err(chip->dev, "pres exceeds the maximum value\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Calculate the duty cycles */
+	prd = div;
+	div *= duty_ns;
+	do_div(div, period_ns);
+	dty = div;
+
+	ret = clk_enable(atmel_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, pres);
+	atmel_pwm->config(chip, pwm, dty, prd);
+
+	clk_disable(atmel_pwm->clk);
+	return ret;
+}
+
+static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm,
+				unsigned long dty, unsigned long prd)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	unsigned int val;
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		/*
+		 * If the PWM channel is enabled, using the update register,
+		 * it needs to set bit 10 of CMR to 0
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty);
+
+		val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+		val &= ~PWM_CMR_UPD_CDTY;
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+	} else {
+		/*
+		 * If the PWM channel is disabled, write value to duty and
+		 * period registers directly.
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty);
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd);
+	}
+}
+
+static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm,
+				unsigned long dty, unsigned long prd)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		/*
+		 * If the PWM channel is enabled, using the duty update register
+		 * to update the value.
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty);
+	} else {
+		/*
+		 * If the PWM channel is disabled, write value to duty and
+		 * period registers directly.
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty);
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd);
+	}
+}
+
+static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				  enum pwm_polarity polarity)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	u32 val;
+	int ret;
+
+	val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		val &= ~PWM_CMR_CPOL;
+	else
+		val |= PWM_CMR_CPOL;
+
+	ret = clk_enable(atmel_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+
+	clk_disable(atmel_pwm->clk);
+
+	return 0;
+}
+
+static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	int ret;
+
+	ret = clk_enable(atmel_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
+
+	return 0;
+}
+
+static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+
+	atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
+
+	clk_disable(atmel_pwm->clk);
+}
+
+static const struct pwm_ops atmel_pwm_ops = {
+	.config = atmel_pwm_config,
+	.set_polarity = atmel_pwm_set_polarity,
+	.enable = atmel_pwm_enable,
+	.disable = atmel_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+struct atmel_pwm_data {
+	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
+		       unsigned long dty, unsigned long prd);
+};
+
+static const struct atmel_pwm_data atmel_pwm_data_v1 = {
+	.config = atmel_pwm_config_v1,
+};
+
+static const struct atmel_pwm_data atmel_pwm_data_v2 = {
+	.config = atmel_pwm_config_v2,
+};
+
+static const struct platform_device_id atmel_pwm_devtypes[] = {
+	{
+		.name = "at91sam9rl-pwm",
+		.driver_data = (kernel_ulong_t)&atmel_pwm_data_v1,
+	}, {
+		.name = "sama5d3-pwm",
+		.driver_data = (kernel_ulong_t)&atmel_pwm_data_v2,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes);
+
+static const struct of_device_id atmel_pwm_dt_ids[] = {
+	{
+		.compatible = "atmel,at91sam9rl-pwm",
+		.data = &atmel_pwm_data_v1,
+	}, {
+		.compatible = "atmel,sama5d3-pwm",
+		.data = &atmel_pwm_data_v2,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
+
+static inline const struct atmel_pwm_data *
+atmel_pwm_get_driver_data(struct platform_device *pdev)
+{
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_device(atmel_pwm_dt_ids, &pdev->dev);
+		if (!match)
+			return NULL;
+
+		return match->data;
+	} else {
+		const struct platform_device_id *id;
+
+		id = platform_get_device_id(pdev);
+
+		return (struct atmel_pwm_data *)id->driver_data;
+	}
+}
+
+static int atmel_pwm_probe(struct platform_device *pdev)
+{
+	const struct atmel_pwm_data *data;
+	struct atmel_pwm_chip *atmel_pwm;
+	struct resource *res;
+	int ret;
+
+	data = atmel_pwm_get_driver_data(pdev);
+	if (!data)
+		return -ENODEV;
+
+	atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
+	if (!atmel_pwm)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(atmel_pwm->base))
+		return PTR_ERR(atmel_pwm->base);
+
+	atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(atmel_pwm->clk))
+		return PTR_ERR(atmel_pwm->clk);
+
+	ret = clk_prepare(atmel_pwm->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to prepare PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm->chip.dev = &pdev->dev;
+	atmel_pwm->chip.ops = &atmel_pwm_ops;
+
+	if (pdev->dev.of_node) {
+		atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
+		atmel_pwm->chip.of_pwm_n_cells = 3;
+	}
+
+	atmel_pwm->chip.base = -1;
+	atmel_pwm->chip.npwm = 4;
+	atmel_pwm->config = data->config;
+
+	ret = pwmchip_add(&atmel_pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
+		goto unprepare_clk;
+	}
+
+	platform_set_drvdata(pdev, atmel_pwm);
+
+	return ret;
+
+unprepare_clk:
+	clk_unprepare(atmel_pwm->clk);
+	return ret;
+}
+
+static int atmel_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
+
+	clk_unprepare(atmel_pwm->clk);
+
+	return pwmchip_remove(&atmel_pwm->chip);
+}
+
+static struct platform_driver atmel_pwm_driver = {
+	.driver = {
+		.name = "atmel-pwm",
+		.of_match_table = of_match_ptr(atmel_pwm_dt_ids),
+	},
+	.id_table = atmel_pwm_devtypes,
+	.probe = atmel_pwm_probe,
+	.remove = atmel_pwm_remove,
+};
+module_platform_driver(atmel_pwm_driver);
+
+MODULE_ALIAS("platform:atmel-pwm");
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Atmel PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c
index 33aa446..e593e9c 100644
--- a/drivers/pwm/pwm-ep93xx.c
+++ b/drivers/pwm/pwm-ep93xx.c
@@ -224,7 +224,7 @@ static struct platform_driver ep93xx_pwm_driver = {
 module_platform_driver(ep93xx_pwm_driver);
 
 MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver");
-MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, "
-	      "H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
 MODULE_ALIAS("platform:ep93xx-pwm");
 MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index 0a2ede3..9c46209 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -165,13 +165,12 @@ static const struct pwm_ops jz4740_pwm_ops = {
 static int jz4740_pwm_probe(struct platform_device *pdev)
 {
 	struct jz4740_pwm_chip *jz4740;
-	int ret;
 
 	jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
 	if (!jz4740)
 		return -ENOMEM;
 
-	jz4740->clk = clk_get(NULL, "ext");
+	jz4740->clk = devm_clk_get(&pdev->dev, "ext");
 	if (IS_ERR(jz4740->clk))
 		return PTR_ERR(jz4740->clk);
 
@@ -180,29 +179,16 @@ static int jz4740_pwm_probe(struct platform_device *pdev)
 	jz4740->chip.npwm = NUM_PWM;
 	jz4740->chip.base = -1;
 
-	ret = pwmchip_add(&jz4740->chip);
-	if (ret < 0) {
-		clk_put(jz4740->clk);
-		return ret;
-	}
-
 	platform_set_drvdata(pdev, jz4740);
 
-	return 0;
+	return pwmchip_add(&jz4740->chip);
 }
 
 static int jz4740_pwm_remove(struct platform_device *pdev)
 {
 	struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = pwmchip_remove(&jz4740->chip);
-	if (ret < 0)
-		return ret;
 
-	clk_put(jz4740->clk);
-
-	return 0;
+	return pwmchip_remove(&jz4740->chip);
 }
 
 static struct platform_driver jz4740_pwm_driver = {
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index a4d2164..8d99573 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  *
  * 2008-02-13	initial version
- * 		eric miao <eric.miao@marvell.com>
+ *		eric miao <eric.miao@marvell.com>
  */
 
 #include <linux/module.h>
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
+#include <linux/of_device.h>
 
 #include <asm/div64.h>
 
@@ -124,6 +125,46 @@ static struct pwm_ops pxa_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
+#ifdef CONFIG_OF
+/*
+ * Device tree users must create one device instance for each pwm channel.
+ * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
+ * code that this is a single channel pxa25x-pwm.  Currently all devices are
+ * supported identically.
+ */
+static struct of_device_id pwm_of_match[] = {
+	{ .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pwm_of_match);
+#else
+#define pwm_of_match NULL
+#endif
+
+static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev)
+{
+	const struct of_device_id *id = of_match_device(pwm_of_match, dev);
+
+	return id ? id->data : NULL;
+}
+
+static struct pwm_device *
+pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	pwm = pwm_request_from_chip(pc, 0, NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm_set_period(pwm, args->args[0]);
+
+	return pwm;
+}
+
 static int pwm_probe(struct platform_device *pdev)
 {
 	const struct platform_device_id *id = platform_get_device_id(pdev);
@@ -131,6 +172,12 @@ static int pwm_probe(struct platform_device *pdev)
 	struct resource *r;
 	int ret = 0;
 
+	if (IS_ENABLED(CONFIG_OF) && id == NULL)
+		id = pxa_pwm_get_id_dt(&pdev->dev);
+
+	if (id == NULL)
+		return -EINVAL;
+
 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
 	if (pwm == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -146,6 +193,11 @@ static int pwm_probe(struct platform_device *pdev)
 	pwm->chip.base = -1;
 	pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
 
+	if (IS_ENABLED(CONFIG_OF)) {
+		pwm->chip.of_xlate = pxa_pwm_of_xlate;
+		pwm->chip.of_pwm_n_cells = 1;
+	}
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(pwm->mmio_base))
@@ -176,6 +228,7 @@ static struct platform_driver pwm_driver = {
 	.driver		= {
 		.name	= "pxa25x-pwm",
 		.owner	= THIS_MODULE,
+		.of_match_table = pwm_of_match,
 	},
 	.probe		= pwm_probe,
 	.remove		= pwm_remove,
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 4e5c3d1..032092c 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -279,7 +279,6 @@ static int ecap_pwm_remove(struct platform_device *pdev)
 	pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ);
 	pm_runtime_put_sync(&pdev->dev);
 
-	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return pwmchip_remove(&pc->chip);
 }
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index a4d8f51..aee4471 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -360,8 +360,8 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	/* Enable TBCLK before enabling PWM device */
 	ret = clk_enable(pc->tbclk);
 	if (ret) {
-		pr_err("Failed to enable TBCLK for %s\n",
-				dev_name(pc->chip.dev));
+		dev_err(chip->dev, "Failed to enable TBCLK for %s\n",
+			dev_name(pc->chip.dev));
 		return ret;
 	}
 
diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c
index 8c20332..4bd0c63 100644
--- a/drivers/pwm/sysfs.c
+++ b/drivers/pwm/sysfs.c
@@ -169,15 +169,7 @@ static struct attribute *pwm_attrs[] = {
 	&dev_attr_polarity.attr,
 	NULL
 };
-
-static const struct attribute_group pwm_attr_group = {
-	.attrs		= pwm_attrs,
-};
-
-static const struct attribute_group *pwm_attr_groups[] = {
-	&pwm_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(pwm);
 
 static void pwm_export_release(struct device *child)
 {
@@ -205,7 +197,7 @@ static int pwm_export_child(struct device *parent, struct pwm_device *pwm)
 	export->child.release = pwm_export_release;
 	export->child.parent = parent;
 	export->child.devt = MKDEV(0, 0);
-	export->child.groups = pwm_attr_groups;
+	export->child.groups = pwm_groups;
 	dev_set_name(&export->child, "pwm%u", pwm->hwpwm);
 
 	ret = device_register(&export->child);
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index fb80d68..b75201f 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -241,7 +241,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 	pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL);
 	if (!pb) {
-		dev_err(&pdev->dev, "no memory for state\n");
 		ret = -ENOMEM;
 		goto err_alloc;
 	}