ARM: imx53: support device tree boot only

With device tree kernel provides the equal support as those imx53 board
files, it's time to remove the board files and get imx53 support device
tree only.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

9 files changed, 18 insertions, 1017 deletions

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 400ef34..565132d 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,7 +32,7 @@ CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_SMP=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1afdc67..374fcc2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -102,15 +102,6 @@ config	SOC_IMX51
 	select ARCH_MX5
 	select ARCH_MX51
 
-config	SOC_IMX53
-	bool
-	select SOC_IMX5
-	select ARCH_MX5
-	select ARCH_MX53
-	select HAVE_CAN_FLEXCAN if CAN
-	select PINCTRL
-	select PINCTRL_IMX53
-
 if ARCH_IMX_V4_V5
 
 comment "MX1 platforms:"
@@ -738,69 +729,19 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD
 
 endchoice
 
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
-	bool "Support i.MX53 platforms from device tree"
-	select SOC_IMX53
-	select MACH_MX53_ARD
-	select MACH_MX53_EVK
-	select MACH_MX53_LOCO
-	select MACH_MX53_SMD
-	help
-	  Include support for Freescale i.MX53 based platforms
-	  using the device tree for discovery
-
-config MACH_MX53_EVK
-	bool "Support MX53 EVK platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
-	bool "Support MX53 SMD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX53 SMD platform. This includes specific
-	  configurations for the board and its peripherals.
+comment "Device tree only"
 
-config MACH_MX53_LOCO
-	bool "Support MX53 LOCO platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 LOCO platform. This includes specific
-	  configurations for the board and its peripherals.
+config	SOC_IMX53
+	bool "i.MX53 support"
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX53
+	select HAVE_CAN_FLEXCAN if CAN
+	select PINCTRL
+	select PINCTRL_IMX53
 
-config MACH_MX53_ARD
-	bool "Support MX53 ARD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	help
-	  Include support for MX53 ARD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX6 family:"
+	  This enables support for Freescale i.MX53 processor.
 
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 88b756c..58dc7c6 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -83,13 +83,9 @@ endif
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
 obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 05541cf..c609676 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -39,8 +39,12 @@ params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
 initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000
 
 dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
-			       imx53-qsb.dtb imx53-smd.dtb
+
+dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \
+			   imx53-evk.dtb \
+			   imx53-qsb.dtb \
+			   imx53-smd.dtb \
+
 dtb-$(CONFIG_SOC_IMX6Q)	+= imx6q-arm2.dtb \
 			   imx6q-sabrelite.dtb \
 			   imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/mach-imx53.c
index 29711e9..29711e9 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/mach-imx53.c
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
deleted file mode 100644
index 6c28e65..0000000
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD		IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP		IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B	IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN		IMX_GPIO_NR(4, 0)
-#define ARD_HOME			IMX_GPIO_NR(5, 10)
-#define ARD_BACK			IMX_GPIO_NR(5, 11)
-#define ARD_PROG			IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP		IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
-	/* UART1 */
-	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
-	/* WEIM for CS1 */
-	MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
-	MX53_PAD_EIM_D16__EMI_WEIM_D_16,
-	MX53_PAD_EIM_D17__EMI_WEIM_D_17,
-	MX53_PAD_EIM_D18__EMI_WEIM_D_18,
-	MX53_PAD_EIM_D19__EMI_WEIM_D_19,
-	MX53_PAD_EIM_D20__EMI_WEIM_D_20,
-	MX53_PAD_EIM_D21__EMI_WEIM_D_21,
-	MX53_PAD_EIM_D22__EMI_WEIM_D_22,
-	MX53_PAD_EIM_D23__EMI_WEIM_D_23,
-	MX53_PAD_EIM_D24__EMI_WEIM_D_24,
-	MX53_PAD_EIM_D25__EMI_WEIM_D_25,
-	MX53_PAD_EIM_D26__EMI_WEIM_D_26,
-	MX53_PAD_EIM_D27__EMI_WEIM_D_27,
-	MX53_PAD_EIM_D28__EMI_WEIM_D_28,
-	MX53_PAD_EIM_D29__EMI_WEIM_D_29,
-	MX53_PAD_EIM_D30__EMI_WEIM_D_30,
-	MX53_PAD_EIM_D31__EMI_WEIM_D_31,
-	MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-	MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-	MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-	MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-	MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-	MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-	MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-	MX53_PAD_EIM_OE__EMI_WEIM_OE,
-	MX53_PAD_EIM_RW__EMI_WEIM_RW,
-	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
-	/* SDHC1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
-	MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
-	MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
-	MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
-	MX53_PAD_GPIO_1__GPIO1_1,
-	MX53_PAD_GPIO_9__GPIO1_9,
-	/* I2C2 */
-	MX53_PAD_EIM_EB2__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* I2C3 */
-	MX53_PAD_GPIO_3__I2C3_SCL,
-	MX53_PAD_GPIO_16__I2C3_SDA,
-	/* GPIO */
-	MX53_PAD_DISP0_DAT16__GPIO5_10,	/* home */
-	MX53_PAD_DISP0_DAT17__GPIO5_11,	/* back */
-	MX53_PAD_DISP0_DAT18__GPIO5_12,	/* prog */
-	MX53_PAD_DISP0_DAT19__GPIO5_13,	/* vol up */
-	MX53_PAD_GPIO_10__GPIO4_0,		/* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{							\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,			\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button ard_buttons[] = {
-	GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
-	GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
-	GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
-	GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
-	.buttons        = ard_buttons,
-	.nbuttons       = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
-	{
-		.start = MX53_CS1_64MB_BASE_ADDR,
-		.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* irq number is run-time assigned */
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
-	.name = "smsc911x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
-	.resource = ard_smsc911x_resources,
-	.dev = {
-		.platform_data = &ard_smsc911x_config,
-	},
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
-	.cd_gpio = ARD_SD1_CD,
-	.wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
-	.bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
-	.bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
-	gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
-	gpio_direction_input(ARD_ETHERNET_INT_B);
-
-	gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
-	gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
-	u32 reg;
-	void __iomem *weim_base, *iomuxc_base;
-
-	weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
-	if (!weim_base)
-		return -ENOMEM;
-
-	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-	if (!iomuxc_base) {
-		iounmap(weim_base);
-		return -ENOMEM;
-	}
-
-	/* CS1 timings for LAN9220 */
-	writel(0x20001, (weim_base + 0x18));
-	writel(0x0, (weim_base + 0x1C));
-	writel(0x16000202, (weim_base + 0x20));
-	writel(0x00000002, (weim_base + 0x24));
-	writel(0x16002082, (weim_base + 0x28));
-	writel(0x00000000, (weim_base + 0x2C));
-	writel(0x00000000, (weim_base + 0x90));
-
-	/* specify 64 MB on CS1 and CS0 on GPR1 */
-	reg = readl(iomuxc_base + 0x4);
-	reg &= ~0x3F;
-	reg |= 0x1B;
-	writel(reg, (iomuxc_base + 0x4));
-
-	iounmap(iomuxc_base);
-	iounmap(weim_base);
-
-	return 0;
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-void __init imx53_ard_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
-					 ARRAY_SIZE(mx53_ard_pads));
-	weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
-	&ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
-	imx53_soc_init();
-	imx53_add_imx_uart(0, NULL);
-
-	imx53_ard_common_init();
-	mx53_ard_io_init();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
-	ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
-	imx53_add_imx2_wdt(0);
-	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
-	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
-	imx_add_gpio_keys(&ard_button_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
-	.init	= mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_ard_timer,
-	.init_machine = mx53_ard_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
deleted file mode 100644
index 09fe219..0000000
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED		IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-	MX53_PAD_PATA_DIOR__UART2_RTS,
-	MX53_PAD_PATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
-	MX53_PAD_EIM_D16__ECSPI1_SCLK,
-	MX53_PAD_EIM_D17__ECSPI1_MISO,
-	MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
-	/* ecspi chip select lines */
-	MX53_PAD_EIM_EB2__GPIO2_30,
-	MX53_PAD_EIM_D19__GPIO3_19,
-	/* LED */
-	MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= MX53EVK_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
-	.leds		= mx53evk_leds,
-	.num_leds	= ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
-	imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
-							"fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx53_evk_spi_cs[] = {
-	EVK_ECSPI1_CS0,
-	EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
-	.chipselect     = mx53_evk_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
-					 ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
-	imx53_soc_init();
-	imx53_evk_common_init();
-
-	mx53_evk_init_uart();
-	mx53_evk_fec_reset();
-	imx53_add_fec(&mx53_evk_fec_pdata);
-
-	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-
-	spi_register_board_info(mx53_evk_spi_board_info,
-		ARRAY_SIZE(mx53_evk_spi_board_info));
-	imx53_add_ecspi(0, &mx53_evk_spi_data);
-	imx53_add_imx2_wdt(0);
-	gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
-	.init	= mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_evk_timer,
-	.init_machine = mx53_evk_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
deleted file mode 100644
index 8abe23c..0000000
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define LOCO_LED			IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
-	/* FEC */
-	MX53_PAD_FEC_MDC__FEC_MDC,
-	MX53_PAD_FEC_MDIO__FEC_MDIO,
-	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
-	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
-	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
-	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
-	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
-	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
-	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
-	/* FEC_nRST */
-	MX53_PAD_PATA_DA_0__GPIO7_6,
-	/* FEC_nINT */
-	MX53_PAD_PATA_DATA4__GPIO2_4,
-	/* AUDMUX5 */
-	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
-	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
-	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
-	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
-	/* I2C2 */
-	MX53_PAD_KEY_COL3__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD1_CD */
-	MX53_PAD_EIM_DA13__GPIO3_13,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-	/* SD3_CD */
-	MX53_PAD_EIM_DA11__GPIO3_11,
-	/* SD3_WP */
-	MX53_PAD_EIM_DA12__GPIO3_12,
-	/* VGA */
-	MX53_PAD_EIM_OE__IPU_DI1_PIN7,
-	MX53_PAD_EIM_RW__IPU_DI1_PIN8,
-	/* DISPLB */
-	MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
-	MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
-	MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
-	MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
-	/* DISP0_POWER_EN */
-	MX53_PAD_EIM_D24__GPIO3_24,
-	/* DISP0 DET INT */
-	MX53_PAD_EIM_D31__GPIO3_31,
-	/* LVDS */
-	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
-	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
-	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
-	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
-	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
-	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
-	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
-	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
-	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
-	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* UART1 */
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-	/* CSI0 */
-	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
-	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
-	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
-	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
-	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
-	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
-	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
-	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
-	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
-	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
-	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
-	/* DISPLAY */
-	MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-	MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-	MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-	MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-	MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-	MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-	MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-	MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-	MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-	MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-	MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-	MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-	MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-	MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-	MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-	MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-	MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-	MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-	MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-	MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-	MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-	MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-	MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-	MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-	MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-	MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-	MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-	MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-	/* Audio CLK*/
-	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
-	/* PWM */
-	MX53_PAD_GPIO_1__PWM2_PWMO,
-	/* SPDIF */
-	MX53_PAD_GPIO_7__SPDIF_PLOCK,
-	MX53_PAD_GPIO_17__SPDIF_OUT1,
-	/* GPIO */
-	MX53_PAD_PATA_DA_1__GPIO7_7,		/* LED */
-	MX53_PAD_PATA_DA_2__GPIO7_8,
-	MX53_PAD_PATA_DATA5__GPIO2_5,
-	MX53_PAD_PATA_DATA6__GPIO2_6,
-	MX53_PAD_PATA_DATA14__GPIO2_14,
-	MX53_PAD_PATA_DATA15__GPIO2_15,
-	MX53_PAD_PATA_INTRQ__GPIO7_2,
-	MX53_PAD_EIM_WAIT__GPIO5_0,
-	MX53_PAD_NANDF_WP_B__GPIO6_9,
-	MX53_PAD_NANDF_RB0__GPIO6_10,
-	MX53_PAD_NANDF_CS1__GPIO6_14,
-	MX53_PAD_NANDF_CS2__GPIO6_15,
-	MX53_PAD_NANDF_CS3__GPIO6_16,
-	MX53_PAD_GPIO_5__GPIO1_5,
-	MX53_PAD_GPIO_16__GPIO7_11,
-	MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,				\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button loco_buttons[] = {
-	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
-	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
-	.buttons        = loco_buttons,
-	.nbuttons       = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
-	.cd_gpio = LOCO_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
-	.cd_gpio = LOCO_SD3_CD,
-	.wp_gpio = LOCO_SD3_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= LOCO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
-	.leds		= mx53loco_leds,
-	.num_leds	= ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
-					 ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mma8450", 0x1C),
-	},
-};
-
-static void __init mx53_loco_board_init(void)
-{
-	int ret;
-	imx53_soc_init();
-	imx53_qsb_common_init();
-
-	imx53_add_imx_uart(0, NULL);
-	mx53_loco_fec_reset();
-	imx53_add_fec(&mx53_loco_fec_data);
-	imx53_add_imx2_wdt(0);
-
-	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
-	if (ret)
-		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
-	i2c_register_board_info(0, mx53loco_i2c_devices,
-				ARRAY_SIZE(mx53loco_i2c_devices));
-	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
-	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
-	imx_add_gpio_keys(&loco_button_data);
-	gpio_led_register_device(-1, &mx53loco_leds_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
-	.init	= mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_loco_timer,
-	.init_machine = mx53_loco_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
deleted file mode 100644
index b15d6a6d..0000000
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-	MX53_PAD_PATA_DA_1__UART3_CTS,
-	MX53_PAD_PATA_DA_2__UART3_RTS,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD2 */
-	MX53_PAD_SD2_CMD__ESDHC2_CMD,
-	MX53_PAD_SD2_CLK__ESDHC2_CLK,
-	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
-	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
-	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
-	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, NULL);
-	imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
-	int ret;
-
-	/* Enable SATA PWR */
-	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
-			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
-	if (ret) {
-		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
-		return;
-	}
-}
-
-void __init imx53_smd_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
-					 ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
-	imx53_soc_init();
-	imx53_smd_common_init();
-
-	mx53_smd_init_uart();
-	mx53_smd_fec_reset();
-	imx53_add_fec(&mx53_smd_fec_data);
-	imx53_add_imx2_wdt(0);
-	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-	imx53_add_sdhci_esdhc_imx(2, NULL);
-	mx53_smd_ahci_pwr_on();
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
-	.init	= mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_smd_timer,
-	.init_machine = mx53_smd_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END