Merge branch 'next' into for-linus

Second round of input updates for 3.19.

14 files changed, 299 insertions, 177 deletions

diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index a4a38fc..44b7057 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -10,12 +10,13 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
+	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
-Required mutual exclusive subnode-properties:
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
 
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
@@ -23,6 +24,9 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- linux,can-disable: Boolean, indicates that button is connected
+	  to dedicated (not shared) interrupt which can be disabled to
+	  suppress events from the button.
 
 Example nodes:
 
diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
index 1b97222..12bb771 100644
--- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt
+++ b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
@@ -8,6 +8,8 @@ Optional properties:
  - debounce-interval        : Debouncing interval time in milliseconds
  - st,scan-count            : Scanning cycles elapsed before key data is updated
  - st,no-autorepeat         : If specified device will not autorepeat
+ - keypad,num-rows          : See ./matrix-keymap.txt
+ - keypad,num-columns       : See ./matrix-keymap.txt
 
 Example:
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index bc20348..b1a52ab 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -28,6 +28,13 @@
 #include <linux/cdev.h>
 #include "input-compat.h"
 
+enum evdev_clock_type {
+	EV_CLK_REAL = 0,
+	EV_CLK_MONO,
+	EV_CLK_BOOT,
+	EV_CLK_MAX
+};
+
 struct evdev {
 	int open;
 	struct input_handle handle;
@@ -49,12 +56,32 @@ struct evdev_client {
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
-	int clkid;
+	int clk_type;
 	bool revoked;
 	unsigned int bufsize;
 	struct input_event buffer[];
 };
 
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+	switch (clkid) {
+
+	case CLOCK_REALTIME:
+		client->clk_type = EV_CLK_REAL;
+		break;
+	case CLOCK_MONOTONIC:
+		client->clk_type = EV_CLK_MONO;
+		break;
+	case CLOCK_BOOTTIME:
+		client->clk_type = EV_CLK_BOOT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* flush queued events of type @type, caller must hold client->buffer_lock */
 static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 {
@@ -108,8 +135,11 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
 	struct input_event ev;
 	ktime_t time;
 
-	time = (client->clkid == CLOCK_MONOTONIC) ?
-		ktime_get() : ktime_get_real();
+	time = client->clk_type == EV_CLK_REAL ?
+			ktime_get_real() :
+			client->clk_type == EV_CLK_MONO ?
+				ktime_get() :
+				ktime_get_boottime();
 
 	ev.time = ktime_to_timeval(time);
 	ev.type = EV_SYN;
@@ -159,7 +189,7 @@ static void __pass_event(struct evdev_client *client,
 
 static void evdev_pass_values(struct evdev_client *client,
 			const struct input_value *vals, unsigned int count,
-			ktime_t mono, ktime_t real)
+			ktime_t *ev_time)
 {
 	struct evdev *evdev = client->evdev;
 	const struct input_value *v;
@@ -169,8 +199,7 @@ static void evdev_pass_values(struct evdev_client *client,
 	if (client->revoked)
 		return;
 
-	event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ?
-				      mono : real);
+	event.time = ktime_to_timeval(ev_time[client->clk_type]);
 
 	/* Interrupts are disabled, just acquire the lock. */
 	spin_lock(&client->buffer_lock);
@@ -198,21 +227,22 @@ static void evdev_events(struct input_handle *handle,
 {
 	struct evdev *evdev = handle->private;
 	struct evdev_client *client;
-	ktime_t time_mono, time_real;
+	ktime_t ev_time[EV_CLK_MAX];
 
-	time_mono = ktime_get();
-	time_real = ktime_mono_to_real(time_mono);
+	ev_time[EV_CLK_MONO] = ktime_get();
+	ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]);
+	ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO],
+						 TK_OFFS_BOOT);
 
 	rcu_read_lock();
 
 	client = rcu_dereference(evdev->grab);
 
 	if (client)
-		evdev_pass_values(client, vals, count, time_mono, time_real);
+		evdev_pass_values(client, vals, count, ev_time);
 	else
 		list_for_each_entry_rcu(client, &evdev->client_list, node)
-			evdev_pass_values(client, vals, count,
-					  time_mono, time_real);
+			evdev_pass_values(client, vals, count, ev_time);
 
 	rcu_read_unlock();
 }
@@ -877,10 +907,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 	case EVIOCSCLOCKID:
 		if (copy_from_user(&i, p, sizeof(unsigned int)))
 			return -EFAULT;
-		if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME)
-			return -EINVAL;
-		client->clkid = i;
-		return 0;
+
+		return evdev_set_clk_type(client, i);
 
 	case EVIOCGKEYCODE:
 		return evdev_handle_get_keycode(dev, p);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 04217c2..213e3a1 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1974,18 +1974,22 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev)
 
 	events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */
 
-	for (i = 0; i < ABS_CNT; i++) {
-		if (test_bit(i, dev->absbit)) {
-			if (input_is_mt_axis(i))
-				events += mt_slots;
-			else
-				events++;
+	if (test_bit(EV_ABS, dev->evbit)) {
+		for (i = 0; i < ABS_CNT; i++) {
+			if (test_bit(i, dev->absbit)) {
+				if (input_is_mt_axis(i))
+					events += mt_slots;
+				else
+					events++;
+			}
 		}
 	}
 
-	for (i = 0; i < REL_CNT; i++)
-		if (test_bit(i, dev->relbit))
-			events++;
+	if (test_bit(EV_REL, dev->evbit)) {
+		for (i = 0; i < REL_CNT; i++)
+			if (test_bit(i, dev->relbit))
+				events++;
+	}
 
 	/* Make room for KEY and MSC events */
 	events += 7;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 96ee26c..a5d9b3f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -559,6 +559,7 @@ config KEYBOARD_SH_KEYSC
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
+	depends on OF
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on STMPE I/O
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index f44f05b..eefd976 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -35,9 +35,13 @@
 struct gpio_button_data {
 	const struct gpio_keys_button *button;
 	struct input_dev *input;
-	struct timer_list timer;
-	struct work_struct work;
-	unsigned int timer_debounce;	/* in msecs */
+
+	struct timer_list release_timer;
+	unsigned int release_delay;	/* in msecs, for IRQ-only buttons */
+
+	struct delayed_work work;
+	unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */
+
 	unsigned int irq;
 	spinlock_t lock;
 	bool disabled;
@@ -116,11 +120,14 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 {
 	if (!bdata->disabled) {
 		/*
-		 * Disable IRQ and possible debouncing timer.
+		 * Disable IRQ and associated timer/work structure.
 		 */
 		disable_irq(bdata->irq);
-		if (bdata->timer_debounce)
-			del_timer_sync(&bdata->timer);
+
+		if (gpio_is_valid(bdata->button->gpio))
+			cancel_delayed_work_sync(&bdata->work);
+		else
+			del_timer_sync(&bdata->release_timer);
 
 		bdata->disabled = true;
 	}
@@ -343,7 +350,7 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
 static void gpio_keys_gpio_work_func(struct work_struct *work)
 {
 	struct gpio_button_data *bdata =
-		container_of(work, struct gpio_button_data, work);
+		container_of(work, struct gpio_button_data, work.work);
 
 	gpio_keys_gpio_report_event(bdata);
 
@@ -351,13 +358,6 @@ static void gpio_keys_gpio_work_func(struct work_struct *work)
 		pm_relax(bdata->input->dev.parent);
 }
 
-static void gpio_keys_gpio_timer(unsigned long _data)
-{
-	struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
-
-	schedule_work(&bdata->work);
-}
-
 static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
@@ -366,11 +366,10 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 
 	if (bdata->button->wakeup)
 		pm_stay_awake(bdata->input->dev.parent);
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
-	else
-		schedule_work(&bdata->work);
+
+	mod_delayed_work(system_wq,
+			 &bdata->work,
+			 msecs_to_jiffies(bdata->software_debounce));
 
 	return IRQ_HANDLED;
 }
@@ -408,7 +407,7 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
 		input_event(input, EV_KEY, button->code, 1);
 		input_sync(input);
 
-		if (!bdata->timer_debounce) {
+		if (!bdata->release_delay) {
 			input_event(input, EV_KEY, button->code, 0);
 			input_sync(input);
 			goto out;
@@ -417,9 +416,9 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
 		bdata->key_pressed = true;
 	}
 
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
+	if (bdata->release_delay)
+		mod_timer(&bdata->release_timer,
+			jiffies + msecs_to_jiffies(bdata->release_delay));
 out:
 	spin_unlock_irqrestore(&bdata->lock, flags);
 	return IRQ_HANDLED;
@@ -429,10 +428,10 @@ static void gpio_keys_quiesce_key(void *data)
 {
 	struct gpio_button_data *bdata = data;
 
-	if (bdata->timer_debounce)
-		del_timer_sync(&bdata->timer);
-
-	cancel_work_sync(&bdata->work);
+	if (gpio_is_valid(bdata->button->gpio))
+		cancel_delayed_work_sync(&bdata->work);
+	else
+		del_timer_sync(&bdata->release_timer);
 }
 
 static int gpio_keys_setup_key(struct platform_device *pdev,
@@ -466,23 +465,25 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 					button->debounce_interval * 1000);
 			/* use timer if gpiolib doesn't provide debounce */
 			if (error < 0)
-				bdata->timer_debounce =
+				bdata->software_debounce =
 						button->debounce_interval;
 		}
 
-		irq = gpio_to_irq(button->gpio);
-		if (irq < 0) {
-			error = irq;
-			dev_err(dev,
-				"Unable to get irq number for GPIO %d, error %d\n",
-				button->gpio, error);
-			return error;
+		if (button->irq) {
+			bdata->irq = button->irq;
+		} else {
+			irq = gpio_to_irq(button->gpio);
+			if (irq < 0) {
+				error = irq;
+				dev_err(dev,
+					"Unable to get irq number for GPIO %d, error %d\n",
+					button->gpio, error);
+				return error;
+			}
+			bdata->irq = irq;
 		}
-		bdata->irq = irq;
 
-		INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
-		setup_timer(&bdata->timer,
-			    gpio_keys_gpio_timer, (unsigned long)bdata);
+		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
 
 		isr = gpio_keys_gpio_isr;
 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -499,8 +500,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			return -EINVAL;
 		}
 
-		bdata->timer_debounce = button->debounce_interval;
-		setup_timer(&bdata->timer,
+		bdata->release_delay = button->debounce_interval;
+		setup_timer(&bdata->release_timer,
 			    gpio_keys_irq_timer, (unsigned long)bdata);
 
 		isr = gpio_keys_irq_isr;
@@ -510,7 +511,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 	input_set_capability(input, button->type ?: EV_KEY, button->code);
 
 	/*
-	 * Install custom action to cancel debounce timer and
+	 * Install custom action to cancel release timer and
 	 * workqueue item.
 	 */
 	error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
@@ -618,33 +619,30 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
-		int gpio = -1;
 		enum of_gpio_flags flags;
 
 		button = &pdata->buttons[i++];
 
-		if (!of_find_property(pp, "gpios", NULL)) {
-			button->irq = irq_of_parse_and_map(pp, 0);
-			if (button->irq == 0) {
-				i--;
-				pdata->nbuttons--;
-				dev_warn(dev, "Found button without gpios or irqs\n");
-				continue;
-			}
-		} else {
-			gpio = of_get_gpio_flags(pp, 0, &flags);
-			if (gpio < 0) {
-				error = gpio;
+		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (button->gpio < 0) {
+			error = button->gpio;
+			if (error != -ENOENT) {
 				if (error != -EPROBE_DEFER)
 					dev_err(dev,
 						"Failed to get gpio flags, error: %d\n",
 						error);
 				return ERR_PTR(error);
 			}
+		} else {
+			button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 		}
 
-		button->gpio = gpio;
-		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
+		button->irq = irq_of_parse_and_map(pp, 0);
+
+		if (!gpio_is_valid(button->gpio) && !button->irq) {
+			dev_err(dev, "Found button without gpios or irqs\n");
+			return ERR_PTR(-EINVAL);
+		}
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
 			dev_err(dev, "Button without keycode: 0x%x\n",
@@ -659,6 +657,8 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 		button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
 
+		button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
+
 		if (of_property_read_u32(pp, "debounce-interval",
 					 &button->debounce_interval))
 			button->debounce_interval = 5;
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index ef5e67f..fe6e3f2 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -45,13 +45,14 @@
 #define STMPE_KEYPAD_MAX_ROWS		8
 #define STMPE_KEYPAD_MAX_COLS		8
 #define STMPE_KEYPAD_ROW_SHIFT		3
-#define STMPE_KEYPAD_KEYMAP_SIZE	\
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
 	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
 
 /**
  * struct stmpe_keypad_variant - model-specific attributes
  * @auto_increment: whether the KPC_DATA_BYTE register address
  *		    auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
  * @num_data: number of data bytes
  * @num_normal_data: number of normal keys' data bytes
  * @max_cols: maximum number of columns supported
@@ -61,6 +62,7 @@
  */
 struct stmpe_keypad_variant {
 	bool		auto_increment;
+	bool		set_pullup;
 	int		num_data;
 	int		num_normal_data;
 	int		max_cols;
@@ -81,6 +83,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 	[STMPE2401] = {
 		.auto_increment		= false,
+		.set_pullup		= true,
 		.num_data		= 3,
 		.num_normal_data	= 2,
 		.max_cols		= 8,
@@ -90,6 +93,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 	[STMPE2403] = {
 		.auto_increment		= true,
+		.set_pullup		= true,
 		.num_data		= 5,
 		.num_normal_data	= 3,
 		.max_cols		= 8,
@@ -99,16 +103,30 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 };
 
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
 struct stmpe_keypad {
 	struct stmpe *stmpe;
 	struct input_dev *input;
 	const struct stmpe_keypad_variant *variant;
-	const struct stmpe_keypad_platform_data *plat;
-
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
 	unsigned int rows;
 	unsigned int cols;
-
-	unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
 };
 
 static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
@@ -171,7 +189,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 	unsigned int col_gpios = variant->col_gpios;
 	unsigned int row_gpios = variant->row_gpios;
 	struct stmpe *stmpe = keypad->stmpe;
+	u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
 	unsigned int pins = 0;
+	unsigned int pu_pins = 0;
+	int ret;
 	int i;
 
 	/*
@@ -188,8 +209,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 	for (i = 0; i < variant->max_cols; i++) {
 		int num = __ffs(col_gpios);
 
-		if (keypad->cols & (1 << i))
+		if (keypad->cols & (1 << i)) {
 			pins |= 1 << num;
+			pu_pins |= 1 << num;
+		}
 
 		col_gpios &= ~(1 << num);
 	}
@@ -203,20 +226,43 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 		row_gpios &= ~(1 << num);
 	}
 
-	return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	if (ret)
+		return ret;
+
+	/*
+	 * On STMPE24xx, set pin bias to pull-up on all keypad input
+	 * pins (columns), this incidentally happen to be maximum 8 pins
+	 * and placed at GPIO0-7 so only the LSB of the pull up register
+	 * ever needs to be written.
+	 */
+	if (variant->set_pullup) {
+		u8 val;
+
+		ret = stmpe_reg_read(stmpe, pureg);
+		if (ret)
+			return ret;
+
+		/* Do not touch unused pins, may be used for GPIO */
+		val = ret & ~pu_pins;
+		val |= pu_pins;
+
+		ret = stmpe_reg_write(stmpe, pureg, val);
+	}
+
+	return 0;
 }
 
 static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 {
-	const struct stmpe_keypad_platform_data *plat = keypad->plat;
 	const struct stmpe_keypad_variant *variant = keypad->variant;
 	struct stmpe *stmpe = keypad->stmpe;
 	int ret;
 
-	if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+	if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
 		return -EINVAL;
 
-	if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+	if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
 		return -EINVAL;
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
@@ -245,7 +291,7 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 
 	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
 			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
-			     plat->scan_count << 4);
+			     keypad->scan_count << 4);
 	if (ret < 0)
 		return ret;
 
@@ -253,17 +299,18 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 			      STMPE_KPC_CTRL_LSB_SCAN |
 			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
 			      STMPE_KPC_CTRL_LSB_SCAN |
-			      (plat->debounce_ms << 1));
+			      (keypad->debounce_ms << 1));
 }
 
-static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+					u32 used_rows, u32 used_cols)
 {
 	int row, col;
 
-	for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
-		for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
+	for (row = 0; row < used_rows; row++) {
+		for (col = 0; col < used_cols; col++) {
 			int code = MATRIX_SCAN_CODE(row, col,
-						STMPE_KEYPAD_ROW_SHIFT);
+						    STMPE_KEYPAD_ROW_SHIFT);
 			if (keypad->keymap[code] != KEY_RESERVED) {
 				keypad->rows |= 1 << row;
 				keypad->cols |= 1 << col;
@@ -272,51 +319,17 @@ static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
 	}
 }
 
-#ifdef CONFIG_OF
-static const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	struct device_node *np = dev->of_node;
-	struct stmpe_keypad_platform_data *plat;
-
-	if (!np)
-		return ERR_PTR(-ENODEV);
-
-	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
-	if (!plat)
-		return ERR_PTR(-ENOMEM);
-
-	of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
-	of_property_read_u32(np, "st,scan-count", &plat->scan_count);
-
-	plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
-
-	return plat;
-}
-#else
-static inline const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif
-
 static int stmpe_keypad_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
-	const struct stmpe_keypad_platform_data *plat;
+	struct device_node *np = pdev->dev.of_node;
 	struct stmpe_keypad *keypad;
 	struct input_dev *input;
+	u32 rows;
+	u32 cols;
 	int error;
 	int irq;
 
-	plat = stmpe->pdata->keypad;
-	if (!plat) {
-		plat = stmpe_keypad_of_probe(&pdev->dev);
-		if (IS_ERR(plat))
-			return PTR_ERR(plat);
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -326,6 +339,13 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
 	if (!keypad)
 		return -ENOMEM;
 
+	keypad->stmpe = stmpe;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+	of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+	keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
 	input = devm_input_allocate_device(&pdev->dev);
 	if (!input)
 		return -ENOMEM;
@@ -334,23 +354,22 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &pdev->dev;
 
-	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
-					   STMPE_KEYPAD_MAX_ROWS,
-					   STMPE_KEYPAD_MAX_COLS,
+	error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
 					   keypad->keymap, input);
 	if (error)
 		return error;
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-	if (!plat->no_autorepeat)
+	if (!keypad->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	stmpe_keypad_fill_used_pins(keypad);
+	stmpe_keypad_fill_used_pins(keypad, rows, cols);
 
-	keypad->stmpe = stmpe;
-	keypad->plat = plat;
 	keypad->input = input;
-	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
 
 	error = stmpe_keypad_chip_init(keypad);
 	if (error < 0)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index d125a01..d88d73d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -881,6 +881,34 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 					  unsigned char *pkt,
 					  unsigned char pkt_id)
 {
+	/*
+	 *       packet-fmt    b7   b6    b5   b4   b3   b2   b1   b0
+	 * Byte0 TWO & MULTI    L    1     R    M    1 Y0-2 Y0-1 Y0-0
+	 * Byte0 NEW            L    1  X1-5    1    1 Y0-2 Y0-1 Y0-0
+	 * Byte1            Y0-10 Y0-9  Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
+	 * Byte2            X0-11    1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
+	 * Byte3            X1-11    1  X0-4 X0-3    1 X0-2 X0-1 X0-0
+	 * Byte4 TWO        X1-10  TWO  X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
+	 * Byte4 MULTI      X1-10  TWO  X1-9 X1-8 X1-7 X1-6 Y1-5    1
+	 * Byte4 NEW        X1-10  TWO  X1-9 X1-8 X1-7 X1-6    0    0
+	 * Byte5 TWO & NEW  Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
+	 * Byte5 MULTI      Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6  F-1  F-0
+	 * L:         Left button
+	 * R / M:     Non-clickpads: Right / Middle button
+	 *            Clickpads: When > 2 fingers are down, and some fingers
+	 *            are in the button area, then the 2 coordinates reported
+	 *            are for fingers outside the button area and these report
+	 *            extra fingers being present in the right / left button
+	 *            area. Note these fingers are not added to the F field!
+	 *            so if a TWO packet is received and R = 1 then there are
+	 *            3 fingers down, etc.
+	 * TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
+	 *            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+	 *               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+	 *               in NEW fmt
+	 * F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+	 */
+
 	mt[0].x = ((pkt[2] & 0x80) << 4);
 	mt[0].x |= ((pkt[2] & 0x3F) << 5);
 	mt[0].x |= ((pkt[3] & 0x30) >> 1);
@@ -919,18 +947,21 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 
 static int alps_get_mt_count(struct input_mt_pos *mt)
 {
-	int i;
+	int i, fingers = 0;
 
-	for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
-		/* empty */;
+	for (i = 0; i < MAX_TOUCHES; i++) {
+		if (mt[i].x != 0 || mt[i].y != 0)
+			fingers++;
+	}
 
-	return i;
+	return fingers;
 }
 
 static int alps_decode_packet_v7(struct alps_fields *f,
 				  unsigned char *p,
 				  struct psmouse *psmouse)
 {
+	struct alps_data *priv = psmouse->private;
 	unsigned char pkt_id;
 
 	pkt_id = alps_get_packet_id_v7(p);
@@ -938,19 +969,52 @@ static int alps_decode_packet_v7(struct alps_fields *f,
 		return 0;
 	if (pkt_id == V7_PACKET_ID_UNKNOWN)
 		return -1;
+	/*
+	 * NEW packets are send to indicate a discontinuity in the finger
+	 * coordinate reporting. Specifically a finger may have moved from
+	 * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
+	 * us.
+	 *
+	 * NEW packets have 3 problems:
+	 * 1) They do not contain middle / right button info (on non clickpads)
+	 *    this can be worked around by preserving the old button state
+	 * 2) They do not contain an accurate fingercount, and they are
+	 *    typically send when the number of fingers changes. We cannot use
+	 *    the old finger count as that may mismatch with the amount of
+	 *    touch coordinates we've available in the NEW packet
+	 * 3) Their x data for the second touch is inaccurate leading to
+	 *    a possible jump of the x coordinate by 16 units when the first
+	 *    non NEW packet comes in
+	 * Since problems 2 & 3 cannot be worked around, just ignore them.
+	 */
+	if (pkt_id == V7_PACKET_ID_NEW)
+		return 1;
 
 	alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
 
-	if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
-		f->left = (p[0] & 0x80) >> 7;
+	if (pkt_id == V7_PACKET_ID_TWO)
+		f->fingers = alps_get_mt_count(f->mt);
+	else /* pkt_id == V7_PACKET_ID_MULTI */
+		f->fingers = 3 + (p[5] & 0x03);
+
+	f->left = (p[0] & 0x80) >> 7;
+	if (priv->flags & ALPS_BUTTONPAD) {
+		if (p[0] & 0x20)
+			f->fingers++;
+		if (p[0] & 0x10)
+			f->fingers++;
+	} else {
 		f->right = (p[0] & 0x20) >> 5;
 		f->middle = (p[0] & 0x10) >> 4;
 	}
 
-	if (pkt_id == V7_PACKET_ID_TWO)
-		f->fingers = alps_get_mt_count(f->mt);
-	else if (pkt_id == V7_PACKET_ID_MULTI)
-		f->fingers = 3 + (p[5] & 0x03);
+	/* Sometimes a single touch is reported in mt[1] rather then mt[0] */
+	if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
+		f->mt[0].x = f->mt[1].x;
+		f->mt[0].y = f->mt[1].y;
+		f->mt[1].x = 0;
+		f->mt[1].y = 0;
+	}
 
 	return 0;
 }
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 30c8b69..354d47e 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -227,6 +227,7 @@ TRACKPOINT_INT_ATTR(thresh, TP_THRESH, TP_DEF_THRESH);
 TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH);
 TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME);
 TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV);
+TRACKPOINT_INT_ATTR(drift_time, TP_DRIFT_TIME, TP_DEF_DRIFT_TIME);
 
 TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0,
 		    TP_DEF_PTSON);
@@ -246,6 +247,7 @@ static struct attribute *trackpoint_attrs[] = {
 	&psmouse_attr_upthresh.dattr.attr,
 	&psmouse_attr_ztime.dattr.attr,
 	&psmouse_attr_jenks.dattr.attr,
+	&psmouse_attr_drift_time.dattr.attr,
 	&psmouse_attr_press_to_select.dattr.attr,
 	&psmouse_attr_skipback.dattr.attr,
 	&psmouse_attr_ext_dev.dattr.attr,
@@ -312,6 +314,7 @@ static int trackpoint_sync(struct psmouse *psmouse, bool in_power_on_state)
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks);
+	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, drift_time);
 
 	/* toggles */
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select);
@@ -332,6 +335,7 @@ static void trackpoint_defaults(struct trackpoint_data *tp)
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks);
+	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, drift_time);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia);
 
 	/* toggles */
diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h
index ecd0547..5617ed3 100644
--- a/drivers/input/mouse/trackpoint.h
+++ b/drivers/input/mouse/trackpoint.h
@@ -70,6 +70,9 @@
 #define TP_UP_THRESH		0x5A	/* Used to generate a 'click' on Z-axis */
 #define TP_Z_TIME		0x5E	/* How sharp of a press */
 #define TP_JENKS_CURV		0x5D	/* Minimum curvature for double click */
+#define TP_DRIFT_TIME		0x5F	/* How long a 'hands off' condition */
+					/* must last (x*107ms) for drift */
+					/* correction to occur */
 
 /*
  * Toggling Flag bits
@@ -120,6 +123,7 @@
 #define TP_DEF_UP_THRESH	0xFF
 #define TP_DEF_Z_TIME		0x26
 #define TP_DEF_JENKS_CURV	0x87
+#define TP_DEF_DRIFT_TIME	0x05
 
 /* Toggles */
 #define TP_DEF_MB		0x00
@@ -137,6 +141,7 @@ struct trackpoint_data
 	unsigned char draghys, mindrag;
 	unsigned char thresh, upthresh;
 	unsigned char ztime, jenks;
+	unsigned char drift_time;
 
 	/* toggles */
 	unsigned char press_to_select;
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 2e4d909..dcc68ef 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -850,9 +850,11 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
 }
 
 #define EDT_ATTR_CHECKSET(name, reg) \
+do {								\
 	if (pdata->name >= edt_ft5x06_attr_##name.limit_low &&		\
 	    pdata->name <= edt_ft5x06_attr_##name.limit_high)		\
-		edt_ft5x06_register_write(tsdata, reg, pdata->name)
+		edt_ft5x06_register_write(tsdata, reg, pdata->name);	\
+} while (0)
 
 #define EDT_GET_PROP(name, reg) {				\
 	u32 val;						\
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 02a17c3..2d29d17 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -519,6 +519,7 @@ static const u8 stmpe1601_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1601_REG_GPIO_SET_DIR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1601_REG_GPIO_RE_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1601_REG_GPIO_FE_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1601_REG_GPIO_PU_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE1601_REG_GPIO_AF_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE1601_REG_INT_STA_GPIO_MSB,
@@ -667,6 +668,7 @@ static const u8 stmpe1801_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1801_REG_GPIO_PULL_UP_LOW,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
 	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
 };
@@ -750,6 +752,8 @@ static const u8 stmpe24xx_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE24XX_REG_GPDR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE24XX_REG_GPRER_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE24XX_REG_GPFER_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE24XX_REG_GPPUR_LSB,
+	[STMPE_IDX_GPPDR_LSB]	= STMPE24XX_REG_GPPDR_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE24XX_REG_GPAFR_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE24XX_REG_IEGPIOR_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE24XX_REG_ISGPIOR_MSB,
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 2d045f2..e00710b 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -188,6 +188,7 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE1601_REG_GPIO_ED_MSB		0x8A
 #define STMPE1601_REG_GPIO_RE_LSB		0x8D
 #define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_PU_LSB		0x91
 #define STMPE1601_REG_GPIO_AF_U_MSB		0x92
 
 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
@@ -276,6 +277,8 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE24XX_REG_GPEDR_MSB		0x8C
 #define STMPE24XX_REG_GPRER_LSB		0x91
 #define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPPUR_LSB		0x97
+#define STMPE24XX_REG_GPPDR_LSB		0x9a
 #define STMPE24XX_REG_GPAFR_U_MSB	0x9B
 
 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 575a86c..f742b67 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -50,6 +50,8 @@ enum {
 	STMPE_IDX_GPEDR_MSB,
 	STMPE_IDX_GPRER_LSB,
 	STMPE_IDX_GPFER_LSB,
+	STMPE_IDX_GPPUR_LSB,
+	STMPE_IDX_GPPDR_LSB,
 	STMPE_IDX_GPAFR_U_MSB,
 	STMPE_IDX_IEGPIOR_LSB,
 	STMPE_IDX_ISGPIOR_LSB,
@@ -113,24 +115,6 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
 extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
 extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 
-struct matrix_keymap_data;
-
-/**
- * struct stmpe_keypad_platform_data - STMPE keypad platform data
- * @keymap_data: key map table and size
- * @debounce_ms: debounce interval, in ms.  Maximum is
- *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
- * @scan_count: number of key scanning cycles to confirm key data.
- *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
- * @no_autorepeat: disable key autorepeat
- */
-struct stmpe_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-	unsigned int debounce_ms;
-	unsigned int scan_count;
-	bool no_autorepeat;
-};
-
 #define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
 
 /**
@@ -199,7 +183,6 @@ struct stmpe_ts_platform_data {
  * @irq_gpio: gpio number over which irq will be requested (significant only if
  *	      irq_over_gpio is true)
  * @gpio: GPIO-specific platform data
- * @keypad: keypad-specific platform data
  * @ts: touchscreen-specific platform data
  */
 struct stmpe_platform_data {
@@ -212,7 +195,6 @@ struct stmpe_platform_data {
 	int autosleep_timeout;
 
 	struct stmpe_gpio_platform_data *gpio;
-	struct stmpe_keypad_platform_data *keypad;
 	struct stmpe_ts_platform_data *ts;
 };