summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-04-02 20:32:55 (GMT)
committerLinus Torvalds <torvalds@g5.osdl.org>2006-04-02 20:32:55 (GMT)
commitef7a4567dc542d8cc563755478464ea928fede41 (patch)
tree6a9005cadbe8968adcf75204541d8fa6bbad5b2c
parenta2308b7f0838406c346a2b0259ff88c7fcf41e79 (diff)
parent56ca904053ab14ba4067a72b69a5edf246771209 (diff)
downloadlinux-ef7a4567dc542d8cc563755478464ea928fede41.tar.xz
Merge master.kernel.org:/home/rmk/linux-2.6-mmc
* master.kernel.org:/home/rmk/linux-2.6-mmc: [ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1 [ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)
-rw-r--r--arch/arm/mach-imx/generic.c13
-rw-r--r--drivers/mmc/Kconfig18
-rw-r--r--drivers/mmc/Makefile2
-rw-r--r--drivers/mmc/at91_mci.c988
-rw-r--r--drivers/mmc/imxmmc.c1096
-rw-r--r--drivers/mmc/imxmmc.h67
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200_mci.h104
-rw-r--r--include/asm-arm/arch-imx/mmc.h12
8 files changed, 2300 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 37613ad6..9d8331b 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -33,6 +33,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/mach/map.h>
+#include <asm/arch/mmc.h>
void imx_gpio_mode(int gpio_mode)
{
@@ -175,13 +176,25 @@ static struct resource imx_mmc_resources[] = {
},
};
+static u64 imxmmmc_dmamask = 0xffffffffUL;
+
static struct platform_device imx_mmc_device = {
.name = "imx-mmc",
.id = 0,
+ .dev = {
+ .dma_mask = &imxmmmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
.num_resources = ARRAY_SIZE(imx_mmc_resources),
.resource = imx_mmc_resources,
};
+void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
+{
+ imx_mmc_device.dev.platform_data = info;
+}
+EXPORT_SYMBOL(imx_set_mmc_info);
+
static struct resource imx_uart1_resources[] = {
[0] = {
.start = 0x00206000,
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 7cc162e..003b077 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -91,4 +91,22 @@ config MMC_AU1X
If unsure, say N.
+config MMC_AT91RM9200
+ tristate "AT91RM9200 SD/MMC Card Interface support"
+ depends on ARCH_AT91RM9200 && MMC
+ help
+ This selects the AT91RM9200 MCI controller.
+
+ If unsure, say N.
+
+config MMC_IMX
+ tristate "Motorola i.MX Multimedia Card Interface support"
+ depends on ARCH_IMX && MMC
+ help
+ This selects the Motorola i.MX Multimedia card Interface.
+ If you have a i.MX platform with a Multimedia Card slot,
+ say Y or M here.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index c7c34aa..d2957e3 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -17,10 +17,12 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
#
obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
+obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
+obj-$(CONFIG_MMC_AT91RM9200) += at91_mci.o
mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
new file mode 100644
index 0000000..6061c2d
--- /dev/null
+++ b/drivers/mmc/at91_mci.c
@@ -0,0 +1,988 @@
+/*
+ * linux/drivers/mmc/at91_mci.c - ATMEL AT91RM9200 MCI Driver
+ *
+ * Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
+ *
+ * Copyright (C) 2006 Malcolm Noyes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ This is the AT91RM9200 MCI driver that has been tested with both MMC cards
+ and SD-cards. Boards that support write protect are now supported.
+ The CCAT91SBC001 board does not support SD cards.
+
+ The three entry points are at91_mci_request, at91_mci_set_ios
+ and at91_mci_get_ro.
+
+ SET IOS
+ This configures the device to put it into the correct mode and clock speed
+ required.
+
+ MCI REQUEST
+ MCI request processes the commands sent in the mmc_request structure. This
+ can consist of a processing command and a stop command in the case of
+ multiple block transfers.
+
+ There are three main types of request, commands, reads and writes.
+
+ Commands are straight forward. The command is submitted to the controller and
+ the request function returns. When the controller generates an interrupt to indicate
+ the command is finished, the response to the command are read and the mmc_request_done
+ function called to end the request.
+
+ Reads and writes work in a similar manner to normal commands but involve the PDC (DMA)
+ controller to manage the transfers.
+
+ A read is done from the controller directly to the scatterlist passed in from the request.
+ Due to a bug in the controller, when a read is completed, all the words are byte
+ swapped in the scatterlist buffers.
+
+ The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
+
+ A write is slightly different in that the bytes to write are read from the scatterlist
+ into a dma memory buffer (this is in case the source buffer should be read only). The
+ entire write buffer is then done from this single dma memory buffer.
+
+ The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY
+
+ GET RO
+ Gets the status of the write protect pin, if available.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/protocol.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/mmc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mci.h>
+#include <asm/arch/at91rm9200_pdc.h>
+
+#define DRIVER_NAME "at91_mci"
+
+#undef SUPPORT_4WIRE
+
+#ifdef CONFIG_MMC_DEBUG
+#define DBG(fmt...) \
+ printk(fmt)
+#else
+#define DBG(fmt...) do { } while (0)
+#endif
+
+static struct clk *mci_clk;
+
+#define FL_SENT_COMMAND (1 << 0)
+#define FL_SENT_STOP (1 << 1)
+
+
+
+/*
+ * Read from a MCI register.
+ */
+static inline unsigned long at91_mci_read(unsigned int reg)
+{
+ void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
+
+ return __raw_readl(mci_base + reg);
+}
+
+/*
+ * Write to a MCI register.
+ */
+static inline void at91_mci_write(unsigned int reg, unsigned long value)
+{
+ void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
+
+ __raw_writel(value, mci_base + reg);
+}
+
+/*
+ * Low level type for this driver
+ */
+struct at91mci_host
+{
+ struct mmc_host *mmc;
+ struct mmc_command *cmd;
+ struct mmc_request *request;
+
+ struct at91_mmc_data *board;
+ int present;
+
+ /*
+ * Flag indicating when the command has been sent. This is used to
+ * work out whether or not to send the stop
+ */
+ unsigned int flags;
+ /* flag for current bus settings */
+ u32 bus_mode;
+
+ /* DMA buffer used for transmitting */
+ unsigned int* buffer;
+ dma_addr_t physical_address;
+ unsigned int total_length;
+
+ /* Latest in the scatterlist that has been enabled for transfer, but not freed */
+ int in_use_index;
+
+ /* Latest in the scatterlist that has been enabled for transfer */
+ int transfer_index;
+};
+
+/*
+ * Copy from sg to a dma block - used for transfers
+ */
+static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
+{
+ unsigned int len, i, size;
+ unsigned *dmabuf = host->buffer;
+
+ size = host->total_length;
+ len = data->sg_len;
+
+ /*
+ * Just loop through all entries. Size might not
+ * be the entire list though so make sure that
+ * we do not transfer too much.
+ */
+ for (i = 0; i < len; i++) {
+ struct scatterlist *sg;
+ int amount;
+ int index;
+ unsigned int *sgbuffer;
+
+ sg = &data->sg[i];
+
+ sgbuffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
+ amount = min(size, sg->length);
+ size -= amount;
+ amount /= 4;
+
+ for (index = 0; index < amount; index++)
+ *dmabuf++ = swab32(sgbuffer[index]);
+
+ kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
+
+ if (size == 0)
+ break;
+ }
+
+ /*
+ * Check that we didn't get a request to transfer
+ * more data than can fit into the SG list.
+ */
+ BUG_ON(size != 0);
+}
+
+/*
+ * Prepare a dma read
+ */
+static void at91mci_pre_dma_read(struct at91mci_host *host)
+{
+ int i;
+ struct scatterlist *sg;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ DBG("pre dma read\n");
+
+ cmd = host->cmd;
+ if (!cmd) {
+ DBG("no command\n");
+ return;
+ }
+
+ data = cmd->data;
+ if (!data) {
+ DBG("no data\n");
+ return;
+ }
+
+ for (i = 0; i < 2; i++) {
+ /* nothing left to transfer */
+ if (host->transfer_index >= data->sg_len) {
+ DBG("Nothing left to transfer (index = %d)\n", host->transfer_index);
+ break;
+ }
+
+ /* Check to see if this needs filling */
+ if (i == 0) {
+ if (at91_mci_read(AT91_PDC_RCR) != 0) {
+ DBG("Transfer active in current\n");
+ continue;
+ }
+ }
+ else {
+ if (at91_mci_read(AT91_PDC_RNCR) != 0) {
+ DBG("Transfer active in next\n");
+ continue;
+ }
+ }
+
+ /* Setup the next transfer */
+ DBG("Using transfer index %d\n", host->transfer_index);
+
+ sg = &data->sg[host->transfer_index++];
+ DBG("sg = %p\n", sg);
+
+ sg->dma_address = dma_map_page(NULL, sg->page, sg->offset, sg->length, DMA_FROM_DEVICE);
+
+ DBG("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
+
+ if (i == 0) {
+ at91_mci_write(AT91_PDC_RPR, sg->dma_address);
+ at91_mci_write(AT91_PDC_RCR, sg->length / 4);
+ }
+ else {
+ at91_mci_write(AT91_PDC_RNPR, sg->dma_address);
+ at91_mci_write(AT91_PDC_RNCR, sg->length / 4);
+ }
+ }
+
+ DBG("pre dma read done\n");
+}
+
+/*
+ * Handle after a dma read
+ */
+static void at91mci_post_dma_read(struct at91mci_host *host)
+{
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ DBG("post dma read\n");
+
+ cmd = host->cmd;
+ if (!cmd) {
+ DBG("no command\n");
+ return;
+ }
+
+ data = cmd->data;
+ if (!data) {
+ DBG("no data\n");
+ return;
+ }
+
+ while (host->in_use_index < host->transfer_index) {
+ unsigned int *buffer;
+ int index;
+ int len;
+
+ struct scatterlist *sg;
+
+ DBG("finishing index %d\n", host->in_use_index);
+
+ sg = &data->sg[host->in_use_index++];
+
+ DBG("Unmapping page %08X\n", sg->dma_address);
+
+ dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE);
+
+ /* Swap the contents of the buffer */
+ buffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
+ DBG("buffer = %p, length = %d\n", buffer, sg->length);
+
+ data->bytes_xfered += sg->length;
+
+ len = sg->length / 4;
+
+ for (index = 0; index < len; index++) {
+ buffer[index] = swab32(buffer[index]);
+ }
+ kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
+ flush_dcache_page(sg->page);
+ }
+
+ /* Is there another transfer to trigger? */
+ if (host->transfer_index < data->sg_len)
+ at91mci_pre_dma_read(host);
+ else {
+ at91_mci_write(AT91_MCI_IER, AT91_MCI_RXBUFF);
+ at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ }
+
+ DBG("post dma read done\n");
+}
+
+/*
+ * Handle transmitted data
+ */
+static void at91_mci_handle_transmitted(struct at91mci_host *host)
+{
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ DBG("Handling the transmit\n");
+
+ /* Disable the transfer */
+ at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+
+ /* Now wait for cmd ready */
+ at91_mci_write(AT91_MCI_IDR, AT91_MCI_TXBUFE);
+ at91_mci_write(AT91_MCI_IER, AT91_MCI_NOTBUSY);
+
+ cmd = host->cmd;
+ if (!cmd) return;
+
+ data = cmd->data;
+ if (!data) return;
+
+ data->bytes_xfered = host->total_length;
+}
+
+/*
+ * Enable the controller
+ */
+static void at91_mci_enable(void)
+{
+ at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
+ at91_mci_write(AT91_MCI_IDR, 0xFFFFFFFF);
+ at91_mci_write(AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
+ at91_mci_write(AT91_MCI_MR, 0x834A);
+ at91_mci_write(AT91_MCI_SDCR, 0x0);
+}
+
+/*
+ * Disable the controller
+ */
+static void at91_mci_disable(void)
+{
+ at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
+}
+
+/*
+ * Send a command
+ * return the interrupts to enable
+ */
+static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
+{
+ unsigned int cmdr, mr;
+ unsigned int block_length;
+ struct mmc_data *data = cmd->data;
+
+ unsigned int blocks;
+ unsigned int ier = 0;
+
+ host->cmd = cmd;
+
+ /* Not sure if this is needed */
+#if 0
+ if ((at91_mci_read(AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
+ DBG("Clearing timeout\n");
+ at91_mci_write(AT91_MCI_ARGR, 0);
+ at91_mci_write(AT91_MCI_CMDR, AT91_MCI_OPDCMD);
+ while (!(at91_mci_read(AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
+ /* spin */
+ DBG("Clearing: SR = %08X\n", at91_mci_read(AT91_MCI_SR));
+ }
+ }
+#endif
+ cmdr = cmd->opcode;
+
+ if (mmc_resp_type(cmd) == MMC_RSP_NONE)
+ cmdr |= AT91_MCI_RSPTYP_NONE;
+ else {
+ /* if a response is expected then allow maximum response latancy */
+ cmdr |= AT91_MCI_MAXLAT;
+ /* set 136 bit response for R2, 48 bit response otherwise */
+ if (mmc_resp_type(cmd) == MMC_RSP_R2)
+ cmdr |= AT91_MCI_RSPTYP_136;
+ else
+ cmdr |= AT91_MCI_RSPTYP_48;
+ }
+
+ if (data) {
+ block_length = 1 << data->blksz_bits;
+ blocks = data->blocks;
+
+ /* always set data start - also set direction flag for read */
+ if (data->flags & MMC_DATA_READ)
+ cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START);
+ else if (data->flags & MMC_DATA_WRITE)
+ cmdr |= AT91_MCI_TRCMD_START;
+
+ if (data->flags & MMC_DATA_STREAM)
+ cmdr |= AT91_MCI_TRTYP_STREAM;
+ if (data->flags & MMC_DATA_MULTI)
+ cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+ }
+ else {
+ block_length = 0;
+ blocks = 0;
+ }
+
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ cmdr |= AT91_MCI_TRCMD_STOP;
+
+ if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ cmdr |= AT91_MCI_OPDCMD;
+
+ /*
+ * Set the arguments and send the command
+ */
+ DBG("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n",
+ cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(AT91_MCI_MR));
+
+ if (!data) {
+ at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
+ at91_mci_write(AT91_PDC_RPR, 0);
+ at91_mci_write(AT91_PDC_RCR, 0);
+ at91_mci_write(AT91_PDC_RNPR, 0);
+ at91_mci_write(AT91_PDC_RNCR, 0);
+ at91_mci_write(AT91_PDC_TPR, 0);
+ at91_mci_write(AT91_PDC_TCR, 0);
+ at91_mci_write(AT91_PDC_TNPR, 0);
+ at91_mci_write(AT91_PDC_TNCR, 0);
+
+ at91_mci_write(AT91_MCI_ARGR, cmd->arg);
+ at91_mci_write(AT91_MCI_CMDR, cmdr);
+ return AT91_MCI_CMDRDY;
+ }
+
+ mr = at91_mci_read(AT91_MCI_MR) & 0x7fff; /* zero block length and PDC mode */
+ at91_mci_write(AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
+
+ /*
+ * Disable the PDC controller
+ */
+ at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+
+ if (cmdr & AT91_MCI_TRCMD_START) {
+ data->bytes_xfered = 0;
+ host->transfer_index = 0;
+ host->in_use_index = 0;
+ if (cmdr & AT91_MCI_TRDIR) {
+ /*
+ * Handle a read
+ */
+ host->buffer = NULL;
+ host->total_length = 0;
+
+ at91mci_pre_dma_read(host);
+ ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
+ }
+ else {
+ /*
+ * Handle a write
+ */
+ host->total_length = block_length * blocks;
+ host->buffer = dma_alloc_coherent(NULL,
+ host->total_length,
+ &host->physical_address, GFP_KERNEL);
+
+ at91mci_sg_to_dma(host, data);
+
+ DBG("Transmitting %d bytes\n", host->total_length);
+
+ at91_mci_write(AT91_PDC_TPR, host->physical_address);
+ at91_mci_write(AT91_PDC_TCR, host->total_length / 4);
+ ier = AT91_MCI_TXBUFE;
+ }
+ }
+
+ /*
+ * Send the command and then enable the PDC - not the other way round as
+ * the data sheet says
+ */
+
+ at91_mci_write(AT91_MCI_ARGR, cmd->arg);
+ at91_mci_write(AT91_MCI_CMDR, cmdr);
+
+ if (cmdr & AT91_MCI_TRCMD_START) {
+ if (cmdr & AT91_MCI_TRDIR)
+ at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTEN);
+ else
+ at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTEN);
+ }
+ return ier;
+}
+
+/*
+ * Wait for a command to complete
+ */
+static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
+{
+ unsigned int ier;
+
+ ier = at91_mci_send_command(host, cmd);
+
+ DBG("setting ier to %08X\n", ier);
+
+ /* Stop on errors or the required value */
+ at91_mci_write(AT91_MCI_IER, 0xffff0000 | ier);
+}
+
+/*
+ * Process the next step in the request
+ */
+static void at91mci_process_next(struct at91mci_host *host)
+{
+ if (!(host->flags & FL_SENT_COMMAND)) {
+ host->flags |= FL_SENT_COMMAND;
+ at91mci_process_command(host, host->request->cmd);
+ }
+ else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
+ host->flags |= FL_SENT_STOP;
+ at91mci_process_command(host, host->request->stop);
+ }
+ else
+ mmc_request_done(host->mmc, host->request);
+}
+
+/*
+ * Handle a command that has been completed
+ */
+static void at91mci_completed_command(struct at91mci_host *host)
+{
+ struct mmc_command *cmd = host->cmd;
+ unsigned int status;
+
+ at91_mci_write(AT91_MCI_IDR, 0xffffffff);
+
+ cmd->resp[0] = at91_mci_read(AT91_MCI_RSPR(0));
+ cmd->resp[1] = at91_mci_read(AT91_MCI_RSPR(1));
+ cmd->resp[2] = at91_mci_read(AT91_MCI_RSPR(2));
+ cmd->resp[3] = at91_mci_read(AT91_MCI_RSPR(3));
+
+ if (host->buffer) {
+ dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
+ host->buffer = NULL;
+ }
+
+ status = at91_mci_read(AT91_MCI_SR);
+
+ DBG("Status = %08X [%08X %08X %08X %08X]\n",
+ status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+
+ if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
+ AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
+ AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
+ if ((status & AT91_MCI_RCRCE) &&
+ ((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
+ cmd->error = MMC_ERR_NONE;
+ }
+ else {
+ if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE))
+ cmd->error = MMC_ERR_TIMEOUT;
+ else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE))
+ cmd->error = MMC_ERR_BADCRC;
+ else if (status & (AT91_MCI_OVRE | AT91_MCI_UNRE))
+ cmd->error = MMC_ERR_FIFO;
+ else
+ cmd->error = MMC_ERR_FAILED;
+
+ DBG("Error detected and set to %d (cmd = %d, retries = %d)\n",
+ cmd->error, cmd->opcode, cmd->retries);
+ }
+ }
+ else
+ cmd->error = MMC_ERR_NONE;
+
+ at91mci_process_next(host);
+}
+
+/*
+ * Handle an MMC request
+ */
+static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct at91mci_host *host = mmc_priv(mmc);
+ host->request = mrq;
+ host->flags = 0;
+
+ at91mci_process_next(host);
+}
+
+/*
+ * Set the IOS
+ */
+static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ int clkdiv;
+ struct at91mci_host *host = mmc_priv(mmc);
+ unsigned long at91_master_clock = clk_get_rate(mci_clk);
+
+ DBG("Clock %uHz, busmode %u, powermode %u, Vdd %u\n",
+ ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
+
+ if (host)
+ host->bus_mode = ios->bus_mode;
+ else
+ printk("MMC: No host for bus_mode\n");
+
+ if (ios->clock == 0) {
+ /* Disable the MCI controller */
+ at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS);
+ clkdiv = 0;
+ }
+ else {
+ /* Enable the MCI controller */
+ at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
+
+ if ((at91_master_clock % (ios->clock * 2)) == 0)
+ clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
+ else
+ clkdiv = (at91_master_clock / ios->clock) / 2;
+
+ DBG("clkdiv = %d. mcck = %ld\n", clkdiv,
+ at91_master_clock / (2 * (clkdiv + 1)));
+ }
+ if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
+ DBG("MMC: Setting controller bus width to 4\n");
+ at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
+ }
+ else {
+ DBG("MMC: Setting controller bus width to 1\n");
+ at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
+ }
+
+ /* Set the clock divider */
+ at91_mci_write(AT91_MCI_MR, (at91_mci_read(AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
+
+ /* maybe switch power to the card */
+ if (host && host->board->vcc_pin) {
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ at91_set_gpio_output(host->board->vcc_pin, 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ at91_set_gpio_output(host->board->vcc_pin, 1);
+ break;
+ }
+ }
+}
+
+/*
+ * Handle an interrupt
+ */
+static irqreturn_t at91_mci_irq(int irq, void *devid, struct pt_regs *regs)
+{
+ struct at91mci_host *host = devid;
+ int completed = 0;
+
+ unsigned int int_status;
+
+ if (host == NULL)
+ return IRQ_HANDLED;
+
+ int_status = at91_mci_read(AT91_MCI_SR);
+ DBG("MCI irq: status = %08X, %08lX, %08lX\n", int_status, at91_mci_read(AT91_MCI_IMR),
+ int_status & at91_mci_read(AT91_MCI_IMR));
+
+ if ((int_status & at91_mci_read(AT91_MCI_IMR)) & 0xffff0000)
+ completed = 1;
+
+ int_status &= at91_mci_read(AT91_MCI_IMR);
+
+ if (int_status & AT91_MCI_UNRE)
+ DBG("MMC: Underrun error\n");
+ if (int_status & AT91_MCI_OVRE)
+ DBG("MMC: Overrun error\n");
+ if (int_status & AT91_MCI_DTOE)
+ DBG("MMC: Data timeout\n");
+ if (int_status & AT91_MCI_DCRCE)
+ DBG("MMC: CRC error in data\n");
+ if (int_status & AT91_MCI_RTOE)
+ DBG("MMC: Response timeout\n");
+ if (int_status & AT91_MCI_RENDE)
+ DBG("MMC: Response end bit error\n");
+ if (int_status & AT91_MCI_RCRCE)
+ DBG("MMC: Response CRC error\n");
+ if (int_status & AT91_MCI_RDIRE)
+ DBG("MMC: Response direction error\n");
+ if (int_status & AT91_MCI_RINDE)
+ DBG("MMC: Response index error\n");
+
+ /* Only continue processing if no errors */
+ if (!completed) {
+ if (int_status & AT91_MCI_TXBUFE) {
+ DBG("TX buffer empty\n");
+ at91_mci_handle_transmitted(host);
+ }
+
+ if (int_status & AT91_MCI_RXBUFF) {
+ DBG("RX buffer full\n");
+ at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
+ }
+
+ if (int_status & AT91_MCI_ENDTX) {
+ DBG("Transmit has ended\n");
+ }
+
+ if (int_status & AT91_MCI_ENDRX) {
+ DBG("Receive has ended\n");
+ at91mci_post_dma_read(host);
+ }
+
+ if (int_status & AT91_MCI_NOTBUSY) {
+ DBG("Card is ready\n");
+ at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
+ }
+
+ if (int_status & AT91_MCI_DTIP) {
+ DBG("Data transfer in progress\n");
+ }
+
+ if (int_status & AT91_MCI_BLKE) {
+ DBG("Block transfer has ended\n");
+ }
+
+ if (int_status & AT91_MCI_TXRDY) {
+ DBG("Ready to transmit\n");
+ }
+
+ if (int_status & AT91_MCI_RXRDY) {
+ DBG("Ready to receive\n");
+ }
+
+ if (int_status & AT91_MCI_CMDRDY) {
+ DBG("Command ready\n");
+ completed = 1;
+ }
+ }
+ at91_mci_write(AT91_MCI_IDR, int_status);
+
+ if (completed) {
+ DBG("Completed command\n");
+ at91_mci_write(AT91_MCI_IDR, 0xffffffff);
+ at91mci_completed_command(host);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t at91_mmc_det_irq(int irq, void *_host, struct pt_regs *regs)
+{
+ struct at91mci_host *host = _host;
+ int present = !at91_get_gpio_value(irq);
+
+ /*
+ * we expect this irq on both insert and remove,
+ * and use a short delay to debounce.
+ */
+ if (present != host->present) {
+ host->present = present;
+ DBG("%s: card %s\n", mmc_hostname(host->mmc),
+ present ? "insert" : "remove");
+ if (!present) {
+ DBG("****** Resetting SD-card bus width ******\n");
+ at91_mci_write(AT91_MCI_SDCR, 0);
+ }
+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+ }
+ return IRQ_HANDLED;
+}
+
+int at91_mci_get_ro(struct mmc_host *mmc)
+{
+ int read_only = 0;
+ struct at91mci_host *host = mmc_priv(mmc);
+
+ if (host->board->wp_pin) {
+ read_only = at91_get_gpio_value(host->board->wp_pin);
+ printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
+ (read_only ? "read-only" : "read-write") );
+ }
+ else {
+ printk(KERN_WARNING "%s: host does not support reading read-only "
+ "switch. Assuming write-enable.\n", mmc_hostname(mmc));
+ }
+ return read_only;
+}
+
+static struct mmc_host_ops at91_mci_ops = {
+ .request = at91_mci_request,
+ .set_ios = at91_mci_set_ios,
+ .get_ro = at91_mci_get_ro,
+};
+
+/*
+ * Probe for the device
+ */
+static int at91_mci_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct at91mci_host *host;
+ int ret;
+
+ DBG("Probe MCI devices\n");
+ at91_mci_disable();
+ at91_mci_enable();
+
+ mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
+ if (!mmc) {
+ DBG("Failed to allocate mmc host\n");
+ return -ENOMEM;
+ }
+
+ mmc->ops = &at91_mci_ops;
+ mmc->f_min = 375000;
+ mmc->f_max = 25000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->buffer = NULL;
+ host->bus_mode = 0;
+ host->board = pdev->dev.platform_data;
+ if (host->board->wire4) {
+#ifdef SUPPORT_4WIRE
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+#else
+ printk("MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
+#endif
+ }
+
+ /*
+ * Get Clock
+ */
+ mci_clk = clk_get(&pdev->dev, "mci_clk");
+ if (!mci_clk) {
+ printk(KERN_ERR "AT91 MMC: no clock defined.\n");
+ return -ENODEV;
+ }
+ clk_enable(mci_clk); /* Enable the peripheral clock */
+
+ /*
+ * Allocate the MCI interrupt
+ */
+ ret = request_irq(AT91_ID_MCI, at91_mci_irq, SA_SHIRQ, DRIVER_NAME, host);
+ if (ret) {
+ DBG("Failed to request MCI interrupt\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, mmc);
+
+ /*
+ * Add host to MMC layer
+ */
+ if (host->board->det_pin)
+ host->present = !at91_get_gpio_value(host->board->det_pin);
+ else
+ host->present = -1;
+
+ mmc_add_host(mmc);
+
+ /*
+ * monitor card insertion/removal if we can
+ */
+ if (host->board->det_pin) {
+ ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
+ SA_SAMPLE_RANDOM, DRIVER_NAME, host);
+ if (ret)
+ DBG("couldn't allocate MMC detect irq\n");
+ }
+
+ DBG(KERN_INFO "Added MCI driver\n");
+
+ return 0;
+}
+
+/*
+ * Remove a device
+ */
+static int at91_mci_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct at91mci_host *host;
+
+ if (!mmc)
+ return -1;
+
+ host = mmc_priv(mmc);
+
+ if (host->present != -1) {
+ free_irq(host->board->det_pin, host);
+ cancel_delayed_work(&host->mmc->detect);
+ }
+
+ mmc_remove_host(mmc);
+ at91_mci_disable();
+ free_irq(AT91_ID_MCI, host);
+ mmc_free_host(mmc);
+
+ clk_disable(mci_clk); /* Disable the peripheral clock */
+ clk_put(mci_clk);
+
+ platform_set_drvdata(pdev, NULL);
+
+ DBG("Removed\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ int ret = 0;
+
+ if (mmc)
+ ret = mmc_suspend_host(mmc, state);
+
+ return ret;
+}
+
+static int at91_mci_resume(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ int ret = 0;
+
+ if (mmc)
+ ret = mmc_resume_host(mmc);
+
+ return ret;
+}
+#else
+#define at91_mci_suspend NULL
+#define at91_mci_resume NULL
+#endif
+
+static struct platform_driver at91_mci_driver = {
+ .probe = at91_mci_probe,
+ .remove = at91_mci_remove,
+ .suspend = at91_mci_suspend,
+ .resume = at91_mci_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_mci_init(void)
+{
+ return platform_driver_register(&at91_mci_driver);
+}
+
+static void __exit at91_mci_exit(void)
+{
+ platform_driver_unregister(&at91_mci_driver);
+}
+
+module_init(at91_mci_init);
+module_exit(at91_mci_exit);
+
+MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver");
+MODULE_AUTHOR("Nick Randell");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
new file mode 100644
index 0000000..ffb7f55
--- /dev/null
+++ b/drivers/mmc/imxmmc.c
@@ -0,0 +1,1096 @@
+/*
+ * linux/drivers/mmc/imxmmc.c - Motorola i.MX MMCI driver
+ *
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix <sascha@saschahauer.de>
+ * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
+ *
+ * derived from pxamci.c by Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Changed to conform redesigned i.MX scatter gather DMA interface
+ *
+ * 2005-11-04 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Updated for 2.6.14 kernel
+ *
+ * 2005-12-13 Jay Monkman <jtm@smoothsmoothie.com>
+ * Found and corrected problems in the write path
+ *
+ * 2005-12-30 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * The event handling rewritten right way in softirq.
+ * Added many ugly hacks and delays to overcome SDHC
+ * deficiencies
+ *
+ */
+#include <linux/config.h>
+
+#ifdef CONFIG_MMC_DEBUG
+#define DEBUG
+#else
+#undef DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/protocol.h>
+#include <linux/delay.h>
+
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/imx-dma.h>
+
+#include "imxmmc.h"
+
+#define DRIVER_NAME "imx-mmc"
+
+#define IMXMCI_INT_MASK_DEFAULT (INT_MASK_BUF_READY | INT_MASK_DATA_TRAN | \
+ INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \
+ INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO)
+
+struct imxmci_host {
+ struct mmc_host *mmc;
+ spinlock_t lock;
+ struct resource *res;
+ int irq;
+ imx_dmach_t dma;
+ unsigned int clkrt;
+ unsigned int cmdat;
+ volatile unsigned int imask;
+ unsigned int power_mode;
+ unsigned int present;
+ struct imxmmc_platform_data *pdata;
+
+ struct mmc_request *req;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ struct timer_list timer;
+ struct tasklet_struct tasklet;
+ unsigned int status_reg;
+ unsigned long pending_events;
+ /* Next to fields are there for CPU driven transfers to overcome SDHC deficiencies */
+ u16 *data_ptr;
+ unsigned int data_cnt;
+ atomic_t stuck_timeout;
+
+ unsigned int dma_nents;
+ unsigned int dma_size;
+ unsigned int dma_dir;
+ int dma_allocated;
+
+ unsigned char actual_bus_width;
+};
+
+#define IMXMCI_PEND_IRQ_b 0
+#define IMXMCI_PEND_DMA_END_b 1
+#define IMXMCI_PEND_DMA_ERR_b 2
+#define IMXMCI_PEND_WAIT_RESP_b 3
+#define IMXMCI_PEND_DMA_DATA_b 4
+#define IMXMCI_PEND_CPU_DATA_b 5
+#define IMXMCI_PEND_CARD_XCHG_b 6
+#define IMXMCI_PEND_SET_INIT_b 7
+
+#define IMXMCI_PEND_IRQ_m (1 << IMXMCI_PEND_IRQ_b)
+#define IMXMCI_PEND_DMA_END_m (1 << IMXMCI_PEND_DMA_END_b)
+#define IMXMCI_PEND_DMA_ERR_m (1 << IMXMCI_PEND_DMA_ERR_b)
+#define IMXMCI_PEND_WAIT_RESP_m (1 << IMXMCI_PEND_WAIT_RESP_b)
+#define IMXMCI_PEND_DMA_DATA_m (1 << IMXMCI_PEND_DMA_DATA_b)
+#define IMXMCI_PEND_CPU_DATA_m (1 << IMXMCI_PEND_CPU_DATA_b)
+#define IMXMCI_PEND_CARD_XCHG_m (1 << IMXMCI_PEND_CARD_XCHG_b)
+#define IMXMCI_PEND_SET_INIT_m (1 << IMXMCI_PEND_SET_INIT_b)
+
+static void imxmci_stop_clock(struct imxmci_host *host)
+{
+ int i = 0;
+ MMC_STR_STP_CLK &= ~STR_STP_CLK_START_CLK;
+ while(i < 0x1000) {
+ if(!(i & 0x7f))
+ MMC_STR_STP_CLK |= STR_STP_CLK_STOP_CLK;
+
+ if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)) {
+ /* Check twice before cut */
+ if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN))
+ return;
+ }
+
+ i++;
+ }
+ dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n");
+}
+
+static void imxmci_start_clock(struct imxmci_host *host)
+{
+ int i = 0;
+ MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK;
+ while(i < 0x1000) {
+ if(!(i & 0x7f))
+ MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+
+ if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) {
+ /* Check twice before cut */
+ if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
+ return;
+ }
+
+ i++;
+ }
+ dev_dbg(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+}
+
+static void imxmci_softreset(void)
+{
+ /* reset sequence */
+ MMC_STR_STP_CLK = 0x8;
+ MMC_STR_STP_CLK = 0xD;
+ MMC_STR_STP_CLK = 0x5;
+ MMC_STR_STP_CLK = 0x5;
+ MMC_STR_STP_CLK = 0x5;
+ MMC_STR_STP_CLK = 0x5;
+ MMC_STR_STP_CLK = 0x5;
+ MMC_STR_STP_CLK = 0x5;
+ MMC_STR_STP_CLK = 0x5;
+ MMC_STR_STP_CLK = 0x5;
+
+ MMC_RES_TO = 0xff;
+ MMC_BLK_LEN = 512;
+ MMC_NOB = 1;
+}
+
+static int imxmci_busy_wait_for_status(struct imxmci_host *host,
+ unsigned int *pstat, unsigned int stat_mask,
+ int timeout, const char *where)
+{
+ int loops=0;
+ while(!(*pstat & stat_mask)) {
+ loops+=2;
+ if(loops >= timeout) {
+ dev_dbg(mmc_dev(host->mmc), "busy wait timeout in %s, STATUS = 0x%x (0x%x)\n",
+ where, *pstat, stat_mask);
+ return -1;
+ }
+ udelay(2);
+ *pstat |= MMC_STATUS;
+ }
+ if(!loops)
+ return 0;
+
+ dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+ loops, where, *pstat, stat_mask);
+ return loops;
+}
+
+static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
+{
+ unsigned int nob = data->blocks;
+ unsigned int blksz = 1 << data->blksz_bits;
+ unsigned int datasz = nob * blksz;
+ int i;
+
+ if (data->flags & MMC_DATA_STREAM)
+ nob = 0xffff;
+
+ host->data = data;
+ data->bytes_xfered = 0;
+
+ MMC_NOB = nob;
+ MMC_BLK_LEN = blksz;
+
+ /*
+ * DMA cannot be used for small block sizes, we have to use CPU driven transfers otherwise.
+ * We are in big troubles for non-512 byte transfers according to note in the paragraph
+ * 20.6.7 of User Manual anyway, but we need to be able to transfer SCR at least.
+ * The situation is even more complex in reality. The SDHC in not able to handle wll
+ * partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
+ * This is required for SCR read at least.
+ */
+ if (datasz < 64) {
+ host->dma_size = datasz;
+ if (data->flags & MMC_DATA_READ) {
+ host->dma_dir = DMA_FROM_DEVICE;
+
+ /* Hack to enable read SCR */
+ if(datasz < 16) {
+ MMC_NOB = 1;
+ MMC_BLK_LEN = 16;
+ }
+ } else {
+ host->dma_dir = DMA_TO_DEVICE;
+ }
+
+ /* Convert back to virtual address */
+ host->data_ptr = (u16*)(page_address(data->sg->page) + data->sg->offset);
+ host->data_cnt = 0;
+
+ clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
+ set_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events);
+
+ return;
+ }
+
+ if (data->flags & MMC_DATA_READ) {
+ host->dma_dir = DMA_FROM_DEVICE;
+ host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, host->dma_dir);
+
+ imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz,
+ host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_READ);
+
+ /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_READ, IMX_DMA_WIDTH_16, CCR_REN);*/
+ CCR(host->dma) = CCR_DMOD_LINEAR | CCR_DSIZ_32 | CCR_SMOD_FIFO | CCR_SSIZ_16 | CCR_REN;
+ } else {
+ host->dma_dir = DMA_TO_DEVICE;
+
+ host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, host->dma_dir);
+
+ imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz,
+ host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_WRITE);
+
+ /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_WRITE, IMX_DMA_WIDTH_16, CCR_REN);*/
+ CCR(host->dma) = CCR_SMOD_LINEAR | CCR_SSIZ_32 | CCR_DMOD_FIFO | CCR_DSIZ_16 | CCR_REN;
+ }
+
+#if 1 /* This code is there only for consistency checking and can be disabled in future */
+ host->dma_size = 0;
+ for(i=0; i<host->dma_nents; i++)
+ host->dma_size+=data->sg[i].length;
+
+ if (datasz > host->dma_size) {
+ dev_err(mmc_dev(host->mmc), "imxmci_setup_data datasz 0x%x > 0x%x dm_size\n",
+ datasz, host->dma_size);
+ }
+#endif
+
+ host->dma_size = datasz;
+
+ wmb();
+
+ if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+ BLR(host->dma) = 0; /* burst 64 byte read / 64 bytes write */
+ else
+ BLR(host->dma) = 16; /* burst 16 byte read / 16 bytes write */
+
+ RSSR(host->dma) = DMA_REQ_SDHC;
+
+ set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
+ clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events);
+
+ /* start DMA engine for read, write is delayed after initial response */
+ if (host->dma_dir == DMA_FROM_DEVICE) {
+ imx_dma_enable(host->dma);
+ }
+}
+
+static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, unsigned int cmdat)
+{
+ unsigned long flags;
+ u32 imask;
+
+ WARN_ON(host->cmd != NULL);
+ host->cmd = cmd;
+
+ if (cmd->flags & MMC_RSP_BUSY)
+ cmdat |= CMD_DAT_CONT_BUSY;
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1: /* short CRC, OPCODE */
+ case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
+ cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R1;
+ break;
+ case MMC_RSP_R2: /* long 136 bit + CRC */
+ cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R2;
+ break;
+ case MMC_RSP_R3: /* short */
+ cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3;
+ break;
+ case MMC_RSP_R6: /* short CRC */
+ cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R6;
+ break;
+ default:
+ break;
+ }
+
+ if ( test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events) )
+ cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */
+
+ if ( host->actual_bus_width == MMC_BUS_WIDTH_4 )
+ cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
+
+ MMC_CMD = cmd->opcode;
+ MMC_ARGH = cmd->arg >> 16;
+ MMC_ARGL = cmd->arg & 0xffff;
+ MMC_CMD_DAT_CONT = cmdat;
+
+ atomic_set(&host->stuck_timeout, 0);
+ set_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events);
+
+
+ imask = IMXMCI_INT_MASK_DEFAULT;
+ imask &= ~INT_MASK_END_CMD_RES;
+ if ( cmdat & CMD_DAT_CONT_DATA_ENABLE ) {
+ /*imask &= ~INT_MASK_BUF_READY;*/
+ imask &= ~INT_MASK_DATA_TRAN;
+ if ( cmdat & CMD_DAT_CONT_WRITE )
+ imask &= ~INT_MASK_WRITE_OP_DONE;
+ if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events))
+ imask &= ~INT_MASK_BUF_READY;
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->imask = imask;
+ MMC_INT_MASK = host->imask;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ dev_dbg(mmc_dev(host->mmc), "CMD%02d (0x%02x) mask set to 0x%04x\n",
+ cmd->opcode, cmd->opcode, imask);
+
+ imxmci_start_clock(host);
+}
+
+static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *req)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->pending_events &= ~(IMXMCI_PEND_WAIT_RESP_m | IMXMCI_PEND_DMA_END_m |
+ IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m);
+
+ host->imask = IMXMCI_INT_MASK_DEFAULT;
+ MMC_INT_MASK = host->imask;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ host->req = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+ mmc_request_done(host->mmc, req);
+}
+
+static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat)
+{
+ struct mmc_data *data = host->data;
+ int data_error;
+
+ if(test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)){
+ imx_dma_disable(host->dma);
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
+ host->dma_dir);
+ }
+
+ if ( stat & STATUS_ERR_MASK ) {
+ dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",stat);
+ if(stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR))
+ data->error = MMC_ERR_BADCRC;
+ else if(stat & STATUS_TIME_OUT_READ)
+ data->error = MMC_ERR_TIMEOUT;
+ else
+ data->error = MMC_ERR_FAILED;
+ } else {
+ data->bytes_xfered = host->dma_size;
+ }
+
+ data_error = data->error;
+
+ host->data = NULL;
+
+ return data_error;
+}
+
+static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
+{
+ struct mmc_command *cmd = host->cmd;
+ int i;
+ u32 a,b,c;
+ struct mmc_data *data = host->data;
+
+ if (!cmd)
+ return 0;
+
+ host->cmd = NULL;
+
+ if (stat & STATUS_TIME_OUT_RESP) {
+ dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
+ cmd->error = MMC_ERR_TIMEOUT;
+ } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
+ dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
+ cmd->error = MMC_ERR_BADCRC;
+ }
+
+ if(cmd->flags & MMC_RSP_PRESENT) {
+ if(cmd->flags & MMC_RSP_136) {
+ for (i = 0; i < 4; i++) {
+ u32 a = MMC_RES_FIFO & 0xffff;
+ u32 b = MMC_RES_FIFO & 0xffff;
+ cmd->resp[i] = a<<16 | b;
+ }
+ } else {
+ a = MMC_RES_FIFO & 0xffff;
+ b = MMC_RES_FIFO & 0xffff;
+ c = MMC_RES_FIFO & 0xffff;
+ cmd->resp[0] = a<<24 | b<<8 | c>>8;
+ }
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "RESP 0x%08x, 0x%08x, 0x%08x, 0x%08x, error %d\n",
+ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error);
+
+ if (data && (cmd->error == MMC_ERR_NONE) && !(stat & STATUS_ERR_MASK)) {
+ if (host->req->data->flags & MMC_DATA_WRITE) {
+
+ /* Wait for FIFO to be empty before starting DMA write */
+
+ stat = MMC_STATUS;
+ if(imxmci_busy_wait_for_status(host, &stat,
+ STATUS_APPL_BUFF_FE,
+ 40, "imxmci_cmd_done DMA WR") < 0) {
+ cmd->error = MMC_ERR_FIFO;
+ imxmci_finish_data(host, stat);
+ if(host->req)
+ imxmci_finish_request(host, host->req);
+ dev_warn(mmc_dev(host->mmc), "STATUS = 0x%04x\n",
+ stat);
+ return 0;
+ }
+
+ if(test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
+ imx_dma_enable(host->dma);
+ }
+ }
+ } else {
+ struct mmc_request *req;
+ imxmci_stop_clock(host);
+ req = host->req;
+
+ if(data)
+ imxmci_finish_data(host, stat);
+
+ if( req ) {
+ imxmci_finish_request(host, req);
+ } else {
+ dev_warn(mmc_dev(host->mmc), "imxmci_cmd_done: no request to finish\n");
+ }
+ }
+
+ return 1;
+}
+
+static int imxmci_data_done(struct imxmci_host *host, unsigned int stat)
+{
+ struct mmc_data *data = host->data;
+ int data_error;
+
+ if (!data)
+ return 0;
+
+ data_error = imxmci_finish_data(host, stat);
+
+ if (host->req->stop && (data_error == MMC_ERR_NONE)) {
+ imxmci_stop_clock(host);
+ imxmci_start_cmd(host, host->req->stop, 0);
+ } else {
+ struct mmc_request *req;
+ req = host->req;
+ if( req ) {
+ imxmci_finish_request(host, req);
+ } else {
+ dev_warn(mmc_dev(host->mmc), "imxmci_data_done: no request to finish\n");
+ }
+ }
+
+ return 1;
+}
+
+static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
+{
+ int i;
+ int burst_len;
+ int flush_len;
+ int trans_done = 0;
+ unsigned int stat = *pstat;
+
+ if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+ burst_len = 16;
+ else
+ burst_len = 64;
+
+ /* This is unfortunately required */
+ dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
+ stat);
+
+ if(host->dma_dir == DMA_FROM_DEVICE) {
+ imxmci_busy_wait_for_status(host, &stat,
+ STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE,
+ 20, "imxmci_cpu_driven_data read");
+
+ while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) &&
+ (host->data_cnt < host->dma_size)) {
+ if(burst_len >= host->dma_size - host->data_cnt) {
+ flush_len = burst_len;
+ burst_len = host->dma_size - host->data_cnt;
+ flush_len -= burst_len;
+ host->data_cnt = host->dma_size;
+ trans_done = 1;
+ } else {
+ flush_len = 0;
+ host->data_cnt += burst_len;
+ }
+
+ for(i = burst_len; i>=2 ; i-=2) {
+ *(host->data_ptr++) = MMC_BUFFER_ACCESS;
+ udelay(20); /* required for clocks < 8MHz*/
+ }
+
+ if(i == 1)
+ *(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS;
+
+ stat = MMC_STATUS;
+
+ /* Flush extra bytes from FIFO */
+ while(flush_len >= 2){
+ flush_len -= 2;
+ i = MMC_BUFFER_ACCESS;
+ stat = MMC_STATUS;
+ stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n",
+ burst_len, stat);
+ }
+ } else {
+ imxmci_busy_wait_for_status(host, &stat,
+ STATUS_APPL_BUFF_FE,
+ 20, "imxmci_cpu_driven_data write");
+
+ while((stat & STATUS_APPL_BUFF_FE) &&
+ (host->data_cnt < host->dma_size)) {
+ if(burst_len >= host->dma_size - host->data_cnt) {
+ burst_len = host->dma_size - host->data_cnt;
+ host->data_cnt = host->dma_size;
+ trans_done = 1;
+ } else {
+ host->data_cnt += burst_len;
+ }
+
+ for(i = burst_len; i>0 ; i-=2)
+ MMC_BUFFER_ACCESS = *(host->data_ptr++);
+
+ stat = MMC_STATUS;
+
+ dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data write burst %d STATUS = 0x%x\n",
+ burst_len, stat);
+ }
+ }
+
+ *pstat = stat;
+
+ return trans_done;
+}
+
+static void imxmci_dma_irq(int dma, void *devid, struct pt_regs *regs)
+{
+ struct imxmci_host *host = devid;
+ uint32_t stat = MMC_STATUS;
+
+ atomic_set(&host->stuck_timeout, 0);
+ host->status_reg = stat;
+ set_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
+ tasklet_schedule(&host->tasklet);
+}
+
+static irqreturn_t imxmci_irq(int irq, void *devid, struct pt_regs *regs)
+{
+ struct imxmci_host *host = devid;
+ uint32_t stat = MMC_STATUS;
+ int handled = 1;
+
+ MMC_INT_MASK = host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT;
+
+ atomic_set(&host->stuck_timeout, 0);
+ host->status_reg = stat;
+ set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
+ tasklet_schedule(&host->tasklet);
+
+ return IRQ_RETVAL(handled);;
+}
+
+static void imxmci_tasklet_fnc(unsigned long data)
+{
+ struct imxmci_host *host = (struct imxmci_host *)data;
+ u32 stat;
+ unsigned int data_dir_mask = 0; /* STATUS_WR_CRC_ERROR_CODE_MASK */
+ int timeout = 0;
+
+ if(atomic_read(&host->stuck_timeout) > 4) {
+ char *what;
+ timeout = 1;
+ stat = MMC_STATUS;
+ host->status_reg = stat;
+ if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
+ if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
+ what = "RESP+DMA";
+ else
+ what = "RESP";
+ else
+ if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
+ if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events))
+ what = "DATA";
+ else
+ what = "DMA";
+ else
+ what = "???";
+
+ dev_err(mmc_dev(host->mmc), "%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n",
+ what, stat, MMC_INT_MASK);
+ dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
+ MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
+ dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n",
+ host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size);
+ }
+
+ if(!host->present || timeout)
+ host->status_reg = STATUS_TIME_OUT_RESP | STATUS_TIME_OUT_READ |
+ STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR;
+
+ if(test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) {
+ clear_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
+
+ stat = MMC_STATUS;
+ /*
+ * This is not required in theory, but there is chance to miss some flag
+ * which clears automatically by mask write, FreeScale original code keeps
+ * stat from IRQ time so do I
+ */
+ stat |= host->status_reg;
+
+ if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
+ imxmci_busy_wait_for_status(host, &stat,
+ STATUS_END_CMD_RESP | STATUS_ERR_MASK,
+ 20, "imxmci_tasklet_fnc resp (ERRATUM #4)");
+ }
+
+ if(stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) {
+ if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
+ imxmci_cmd_done(host, stat);
+ if(host->data && (stat & STATUS_ERR_MASK))
+ imxmci_data_done(host, stat);
+ }
+
+ if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) {
+ stat |= MMC_STATUS;
+ if(imxmci_cpu_driven_data(host, &stat)){
+ if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
+ imxmci_cmd_done(host, stat);
+ atomic_clear_mask(IMXMCI_PEND_IRQ_m|IMXMCI_PEND_CPU_DATA_m,
+ &host->pending_events);
+ imxmci_data_done(host, stat);
+ }
+ }
+ }
+
+ if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) &&
+ !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
+
+ stat = MMC_STATUS;
+ /* Same as above */
+ stat |= host->status_reg;
+
+ if(host->dma_dir == DMA_TO_DEVICE) {
+ data_dir_mask = STATUS_WRITE_OP_DONE;
+ } else {
+ data_dir_mask = STATUS_DATA_TRANS_DONE;
+ }
+
+ imxmci_busy_wait_for_status(host, &stat,
+ data_dir_mask,
+ 50, "imxmci_tasklet_fnc data");
+
+ if(stat & data_dir_mask) {
+ clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
+ imxmci_data_done(host, stat);
+ }
+ }
+
+ if(test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) {
+
+ if(host->cmd)
+ imxmci_cmd_done(host, STATUS_TIME_OUT_RESP);
+
+ if(host->data)
+ imxmci_data_done(host, STATUS_TIME_OUT_READ |
+ STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR);
+
+ if(host->req)
+ imxmci_finish_request(host, host->req);
+
+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+
+ }
+}
+
+static void imxmci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+ struct imxmci_host *host = mmc_priv(mmc);
+ unsigned int cmdat;
+
+ WARN_ON(host->req != NULL);
+
+ host->req = req;
+
+ cmdat = 0;
+
+ if (req->data) {
+ imxmci_setup_data(host, req->data);
+
+ cmdat |= CMD_DAT_CONT_DATA_ENABLE;
+
+ if (req->data->flags & MMC_DATA_WRITE)
+ cmdat |= CMD_DAT_CONT_WRITE;
+
+ if (req->data->flags & MMC_DATA_STREAM) {
+ cmdat |= CMD_DAT_CONT_STREAM_BLOCK;
+ }
+ }
+
+ imxmci_start_cmd(host, req->cmd, cmdat);
+}
+
+#define CLK_RATE 19200000
+
+static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct imxmci_host *host = mmc_priv(mmc);
+ int prescaler;
+
+ dev_dbg(mmc_dev(host->mmc), "clock %u power %u vdd %u width %u\n",
+ ios->clock, ios->power_mode, ios->vdd,
+ (ios->bus_width==MMC_BUS_WIDTH_4)?4:1);
+
+ if( ios->bus_width==MMC_BUS_WIDTH_4 ) {
+ host->actual_bus_width = MMC_BUS_WIDTH_4;
+ imx_gpio_mode(PB11_PF_SD_DAT3);
+ }else{
+ host->actual_bus_width = MMC_BUS_WIDTH_1;
+ imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11);
+ }
+
+ if ( host->power_mode != ios->power_mode ) {
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ break;
+ case MMC_POWER_UP:
+ set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events);
+ break;
+ case MMC_POWER_ON:
+ break;
+ }
+ host->power_mode = ios->power_mode;
+ }
+
+ if ( ios->clock ) {
+ unsigned int clk;
+
+ /* The prescaler is 5 for PERCLK2 equal to 96MHz
+ * then 96MHz / 5 = 19.2 MHz
+ */
+ clk=imx_get_perclk2();
+ prescaler=(clk+(CLK_RATE*7)/8)/CLK_RATE;
+ switch(prescaler) {
+ case 0:
+ case 1: prescaler = 0;
+ break;
+ case 2: prescaler = 1;
+ break;
+ case 3: prescaler = 2;
+ break;
+ case 4: prescaler = 4;
+ break;
+ default:
+ case 5: prescaler = 5;
+ break;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "PERCLK2 %d MHz -> prescaler %d\n",
+ clk, prescaler);
+
+ for(clk=0; clk<8; clk++) {
+ int x;
+ x = CLK_RATE / (1<<clk);
+ if( x <= ios->clock)
+ break;
+ }
+
+ MMC_STR_STP_CLK |= STR_STP_CLK_ENABLE; /* enable controller */
+
+ imxmci_stop_clock(host);
+ MMC_CLK_RATE = (prescaler<<3) | clk;
+ imxmci_start_clock(host);
+
+ dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
+ } else {
+ imxmci_stop_clock(host);
+ }
+}
+
+static struct mmc_host_ops imxmci_ops = {
+ .request = imxmci_request,
+ .set_ios = imxmci_set_ios,
+};
+
+static struct resource *platform_device_resource(struct platform_device *dev, unsigned int mask, int nr)
+{
+ int i;
+
+ for (i = 0; i < dev->num_resources; i++)
+ if (dev->resource[i].flags == mask && nr-- == 0)
+ return &dev->resource[i];
+ return NULL;
+}
+
+static int platform_device_irq(struct platform_device *dev, int nr)
+{
+ int i;
+
+ for (i = 0; i < dev->num_resources; i++)
+ if (dev->resource[i].flags == IORESOURCE_IRQ && nr-- == 0)
+ return dev->resource[i].start;
+ return NO_IRQ;
+}
+
+static void imxmci_check_status(unsigned long data)
+{
+ struct imxmci_host *host = (struct imxmci_host *)data;
+
+ if( host->pdata->card_present() != host->present ) {
+ host->present ^= 1;
+ dev_info(mmc_dev(host->mmc), "card %s\n",
+ host->present ? "inserted" : "removed");
+
+ set_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events);
+ tasklet_schedule(&host->tasklet);
+ }
+
+ if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) ||
+ test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
+ atomic_inc(&host->stuck_timeout);
+ if(atomic_read(&host->stuck_timeout) > 4)
+ tasklet_schedule(&host->tasklet);
+ } else {
+ atomic_set(&host->stuck_timeout, 0);
+
+ }
+
+ mod_timer(&host->timer, jiffies + (HZ>>1));
+}
+
+static int imxmci_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct imxmci_host *host = NULL;
+ struct resource *r;
+ int ret = 0, irq;
+
+ printk(KERN_INFO "i.MX mmc driver\n");
+
+ r = platform_device_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_device_irq(pdev, 0);
+ if (!r || irq == NO_IRQ)
+ return -ENXIO;
+
+ r = request_mem_region(r->start, 0x100, "IMXMCI");
+ if (!r)
+ return -EBUSY;
+
+ mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mmc->ops = &imxmci_ops;
+ mmc->f_min = 150000;
+ mmc->f_max = CLK_RATE/2;
+ mmc->ocr_avail = MMC_VDD_32_33;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ /* MMC core transfer sizes tunable parameters */
+ mmc->max_hw_segs = 64;
+ mmc->max_phys_segs = 64;
+ mmc->max_sectors = 64; /* default 1 << (PAGE_CACHE_SHIFT - 9) */
+ mmc->max_seg_size = 64*512; /* default PAGE_CACHE_SIZE */
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->dma_allocated = 0;
+ host->pdata = pdev->dev.platform_data;
+
+ spin_lock_init(&host->lock);
+ host->res = r;
+ host->irq = irq;
+
+ imx_gpio_mode(PB8_PF_SD_DAT0);
+ imx_gpio_mode(PB9_PF_SD_DAT1);
+ imx_gpio_mode(PB10_PF_SD_DAT2);
+ /* Configured as GPIO with pull-up to ensure right MCC card mode */
+ /* Switched to PB11_PF_SD_DAT3 if 4 bit bus is configured */
+ imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11);
+ /* imx_gpio_mode(PB11_PF_SD_DAT3); */
+ imx_gpio_mode(PB12_PF_SD_CLK);
+ imx_gpio_mode(PB13_PF_SD_CMD);
+
+ imxmci_softreset();
+
+ if ( MMC_REV_NO != 0x390 ) {
+ dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
+ MMC_REV_NO);
+ goto out;
+ }
+
+ MMC_READ_TO = 0x2db4; /* recommended in data sheet */
+
+ host->imask = IMXMCI_INT_MASK_DEFAULT;
+ MMC_INT_MASK = host->imask;
+
+
+ if(imx_dma_request_by_prio(&host->dma, DRIVER_NAME, DMA_PRIO_LOW)<0){
+ dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
+ ret = -EBUSY;
+ goto out;
+ }
+ host->dma_allocated=1;
+ imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host);
+
+ tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host);
+ host->status_reg=0;
+ host->pending_events=0;
+
+ ret = request_irq(host->irq, imxmci_irq, 0, DRIVER_NAME, host);
+ if (ret)
+ goto out;
+
+ host->present = host->pdata->card_present();
+ init_timer(&host->timer);
+ host->timer.data = (unsigned long)host;
+ host->timer.function = imxmci_check_status;
+ add_timer(&host->timer);
+ mod_timer(&host->timer, jiffies + (HZ>>1));
+
+ platform_set_drvdata(pdev, mmc);
+
+ mmc_add_host(mmc);
+
+ return 0;
+
+out:
+ if (host) {
+ if(host->dma_allocated){
+ imx_dma_free(host->dma);
+ host->dma_allocated=0;
+ }
+ }
+ if (mmc)
+ mmc_free_host(mmc);
+ release_resource(r);
+ return ret;
+}
+
+static int imxmci_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (mmc) {
+ struct imxmci_host *host = mmc_priv(mmc);
+
+ tasklet_disable(&host->tasklet);
+
+ del_timer_sync(&host->timer);
+ mmc_remove_host(mmc);
+
+ free_irq(host->irq, host);
+ if(host->dma_allocated){
+ imx_dma_free(host->dma);
+ host->dma_allocated=0;
+ }
+
+ tasklet_kill(&host->tasklet);
+
+ release_resource(host->res);
+
+ mmc_free_host(mmc);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int imxmci_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+ int ret = 0;
+
+ if (mmc)
+ ret = mmc_suspend_host(mmc, state);
+
+ return ret;
+}
+
+static int imxmci_resume(struct platform_device *dev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct imxmci_host *host;
+ int ret = 0;
+
+ if (mmc) {
+ host = mmc_priv(mmc);
+ if(host)
+ set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events);
+ ret = mmc_resume_host(mmc);
+ }
+
+ return ret;
+}
+#else
+#define imxmci_suspend NULL
+#define imxmci_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver imxmci_driver = {
+ .probe = imxmci_probe,
+ .remove = imxmci_remove,
+ .suspend = imxmci_suspend,
+ .resume = imxmci_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ }
+};
+
+static int __init imxmci_init(void)
+{
+ return platform_driver_register(&imxmci_driver);
+}
+
+static void __exit imxmci_exit(void)
+{
+ platform_driver_unregister(&imxmci_driver);
+}
+
+module_init(imxmci_init);
+module_exit(imxmci_exit);
+
+MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/imxmmc.h b/drivers/mmc/imxmmc.h
new file mode 100644
index 0000000..e5339e3
--- /dev/null
+++ b/drivers/mmc/imxmmc.h
@@ -0,0 +1,67 @@
+
+# define __REG16(x) (*((volatile u16 *)IO_ADDRESS(x)))
+
+#define MMC_STR_STP_CLK __REG16(IMX_MMC_BASE + 0x00)
+#define MMC_STATUS __REG16(IMX_MMC_BASE + 0x04)
+#define MMC_CLK_RATE __REG16(IMX_MMC_BASE + 0x08)
+#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C)
+#define MMC_RES_TO __REG16(IMX_MMC_BASE + 0x10)
+#define MMC_READ_TO __REG16(IMX_MMC_BASE + 0x14)
+#define MMC_BLK_LEN __REG16(IMX_MMC_BASE + 0x18)
+#define MMC_NOB __REG16(IMX_MMC_BASE + 0x1C)
+#define MMC_REV_NO __REG16(IMX_MMC_BASE + 0x20)
+#define MMC_INT_MASK __REG16(IMX_MMC_BASE + 0x24)
+#define MMC_CMD __REG16(IMX_MMC_BASE + 0x28)
+#define MMC_ARGH __REG16(IMX_MMC_BASE + 0x2C)
+#define MMC_ARGL __REG16(IMX_MMC_BASE + 0x30)
+#define MMC_RES_FIFO __REG16(IMX_MMC_BASE + 0x34)
+#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38)
+#define MMC_BUFFER_ACCESS_OFS 0x38
+
+
+#define STR_STP_CLK_ENDIAN (1<<5)
+#define STR_STP_CLK_RESET (1<<3)
+#define STR_STP_CLK_ENABLE (1<<2)
+#define STR_STP_CLK_START_CLK (1<<1)
+#define STR_STP_CLK_STOP_CLK (1<<0)
+#define STATUS_CARD_PRESENCE (1<<15)
+#define STATUS_SDIO_INT_ACTIVE (1<<14)
+#define STATUS_END_CMD_RESP (1<<13)
+#define STATUS_WRITE_OP_DONE (1<<12)
+#define STATUS_DATA_TRANS_DONE (1<<11)
+#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10)
+#define STATUS_CARD_BUS_CLK_RUN (1<<8)
+#define STATUS_APPL_BUFF_FF (1<<7)
+#define STATUS_APPL_BUFF_FE (1<<6)
+#define STATUS_RESP_CRC_ERR (1<<5)
+#define STATUS_CRC_READ_ERR (1<<3)
+#define STATUS_CRC_WRITE_ERR (1<<2)
+#define STATUS_TIME_OUT_RESP (1<<1)
+#define STATUS_TIME_OUT_READ (1<<0)
+#define STATUS_ERR_MASK 0x2f
+#define CLK_RATE_PRESCALER(x) ((x) & 0x7)
+#define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3)
+#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12)
+#define CMD_DAT_CONT_STOP_READWAIT (1<<11)
+#define CMD_DAT_CONT_START_READWAIT (1<<10)
+#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8)
+#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8)
+#define CMD_DAT_CONT_INIT (1<<7)
+#define CMD_DAT_CONT_BUSY (1<<6)
+#define CMD_DAT_CONT_STREAM_BLOCK (1<<5)
+#define CMD_DAT_CONT_WRITE (1<<4)
+#define CMD_DAT_CONT_DATA_ENABLE (1<<3)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6)
+#define INT_MASK_AUTO_CARD_DETECT (1<<6)
+#define INT_MASK_DAT0_EN (1<<5)
+#define INT_MASK_SDIO (1<<4)
+#define INT_MASK_BUF_READY (1<<3)
+#define INT_MASK_END_CMD_RES (1<<2)
+#define INT_MASK_WRITE_OP_DONE (1<<1)
+#define INT_MASK_DATA_TRAN (1<<0)
+#define INT_ALL (0x7f)
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h b/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h
new file mode 100644
index 0000000..f28636d
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h
@@ -0,0 +1,104 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MCI_H
+#define AT91RM9200_MCI_H
+
+#define AT91_MCI_CR 0x00 /* Control Register */
+#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
+#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
+#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
+#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
+#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
+
+#define AT91_MCI_MR 0x04 /* Mode Register */
+#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
+#define AT91_MCI_PWSDIV (3 << 8) /* Power Saving Divider */
+#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
+#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
+#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
+
+#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
+#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
+#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
+#define AT91_MCI_DTOMUL_1 (0 << 4)
+#define AT91_MCI_DTOMUL_16 (1 << 4)
+#define AT91_MCI_DTOMUL_128 (2 << 4)
+#define AT91_MCI_DTOMUL_256 (3 << 4)
+#define AT91_MCI_DTOMUL_1K (4 << 4)
+#define AT91_MCI_DTOMUL_4K (5 << 4)
+#define AT91_MCI_DTOMUL_64K (6 << 4)
+#define AT91_MCI_DTOMUL_1M (7 << 4)
+
+#define AT91_MCI_SDCR 0x0c /* SD Card Register */
+#define AT91_MCI_SDCSEL (0xf << 0) /* SD Card Selector */
+#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR 0x10 /* Argument Register */
+
+#define AT91_MCI_CMDR 0x14 /* Command Register */
+#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
+#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
+#define AT91_MCI_RSPTYP_NONE (0 << 6)
+#define AT91_MCI_RSPTYP_48 (1 << 6)
+#define AT91_MCI_RSPTYP_136 (2 << 6)
+#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
+#define AT91_MCI_SPCMD_NONE (0 << 8)
+#define AT91_MCI_SPCMD_INIT (1 << 8)
+#define AT91_MCI_SPCMD_SYNC (2 << 8)
+#define AT91_MCI_SPCMD_ICMD (4 << 8)
+#define AT91_MCI_SPCMD_IRESP (5 << 8)
+#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
+#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
+#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
+#define AT91_MCI_TRCMD_NONE (0 << 16)
+#define AT91_MCI_TRCMD_START (1 << 16)
+#define AT91_MCI_TRCMD_STOP (2 << 16)
+#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
+#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
+#define AT91_MCI_TRTYP_BLOCK (0 << 19)
+#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
+#define AT91_MCI_TRTYP_STREAM (2 << 19)
+
+#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
+#define AT91_MCR_RDR 0x30 /* Receive Data Register */
+#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
+
+#define AT91_MCI_SR 0x40 /* Status Register */
+#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
+#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
+#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
+#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
+#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
+#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
+#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
+#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
+#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
+#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
+#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
+#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
+#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
+#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
+#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
+#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
+#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
+#define AT91_MCI_OVRE (1 << 30) /* Overrun */
+#define AT91_MCI_UNRE (1 << 31) /* Underrun */
+
+#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
+#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
+#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-imx/mmc.h b/include/asm-arm/arch-imx/mmc.h
new file mode 100644
index 0000000..1937151
--- /dev/null
+++ b/include/asm-arm/arch-imx/mmc.h
@@ -0,0 +1,12 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/protocol.h>
+
+struct imxmmc_platform_data {
+ int (*card_present)(void);
+};
+
+extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
+
+#endif