diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-06-19 06:36:17 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-06-19 06:36:17 (GMT) |
commit | 049a40c0a2d4b458583161ec1b9ce109408cb1aa (patch) | |
tree | e304d16877c0446b1a6119e8bfa469419b38efa9 | |
parent | c141afd1a28793c08c88325aa64b773be6f79ccf (diff) | |
parent | 8fd0976702f05042c776848819e5fd2a835f23c9 (diff) | |
download | linux-049a40c0a2d4b458583161ec1b9ce109408cb1aa.tar.xz |
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another batch of fixes for ARM SoC platforms. Most are smaller fixes.
Two areas that are worth pointing out are:
- OMAP had a handful of changes to voltage specs that caused a bit of
churn, most of volume of change in this branch is due to this.
- There are a couple of _rcuidle fixes from Paul that touch common
code and came in through the OMAP tree since they were the ones who
saw the problems.
The rest is smaller changes across a handful of platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
ARM: OMAP2+: timer: add probe for clocksources
ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
arm: Use _rcuidle for smp_cross_call() tracepoints
MAINTAINERS: Add myself as reviewer of ARM FSL/NXP
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
ARM: imx6ul: Fix Micrel PHY mask
ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
ARM: dts: DRA74x: fix DSS PLL2 addresses
ARM: OMAP2: Enable Errata 430973 for OMAP3
ARM: dts: socfpga: Add missing PHY phandle
ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board
ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator
ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator
ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile
...
41 files changed, 252 insertions, 136 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 2bfc987..98f8a5c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1159,6 +1159,7 @@ F: arch/arm/mach-footbridge/ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE M: Shawn Guo <shawnguo@kernel.org> M: Sascha Hauer <kernel@pengutronix.de> +R: Fabio Estevam <fabio.estevam@nxp.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 06b6c2d..414b427 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -741,6 +741,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ + sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-orangepi.dtb \ sun7i-a20-orangepi-mini.dtb \ diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index d82dd6e..5687d6b 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -418,7 +418,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps@24 { compatible = "ti,tps65218"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index b01a594..0e63b9d 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -60,10 +60,26 @@ tps659038_pmic { compatible = "ti,tps659038-pmic"; + + smps12-in-supply = <&vmain>; + smps3-in-supply = <&vmain>; + smps45-in-supply = <&vmain>; + smps6-in-supply = <&vmain>; + smps7-in-supply = <&vmain>; + smps8-in-supply = <&vmain>; + smps9-in-supply = <&vmain>; + ldo1-in-supply = <&vmain>; + ldo2-in-supply = <&vmain>; + ldo3-in-supply = <&vmain>; + ldo4-in-supply = <&vmain>; + ldo9-in-supply = <&vmain>; + ldoln-in-supply = <&vmain>; + ldousb-in-supply = <&vmain>; + ldortc-in-supply = <&vmain>; + regulators { smps12_reg: smps12 { /* VDD_MPU */ - vin-supply = <&vmain>; regulator-name = "smps12"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -73,7 +89,6 @@ smps3_reg: smps3 { /* VDD_DDR EMIF1 EMIF2 */ - vin-supply = <&vmain>; regulator-name = "smps3"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; @@ -84,7 +99,6 @@ smps45_reg: smps45 { /* VDD_DSPEVE on AM572 */ /* VDD_IVA + VDD_DSP on AM571 */ - vin-supply = <&vmain>; regulator-name = "smps45"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -94,7 +108,6 @@ smps6_reg: smps6 { /* VDD_GPU */ - vin-supply = <&vmain>; regulator-name = "smps6"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -104,7 +117,6 @@ smps7_reg: smps7 { /* VDD_CORE */ - vin-supply = <&vmain>; regulator-name = "smps7"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -115,13 +127,11 @@ smps8_reg: smps8 { /* 5728 - VDD_IVAHD */ /* 5718 - N.C. test point */ - vin-supply = <&vmain>; regulator-name = "smps8"; }; smps9_reg: smps9 { /* VDD_3_3D */ - vin-supply = <&vmain>; regulator-name = "smps9"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -132,7 +142,6 @@ ldo1_reg: ldo1 { /* VDDSHV8 - VSDMMC */ /* NOTE: on rev 1.3a, data supply */ - vin-supply = <&vmain>; regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -142,7 +151,6 @@ ldo2_reg: ldo2 { /* VDDSH18V */ - vin-supply = <&vmain>; regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -152,7 +160,6 @@ ldo3_reg: ldo3 { /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ - vin-supply = <&vmain>; regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -162,7 +169,6 @@ ldo4_reg: ldo4 { /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ - vin-supply = <&vmain>; regulator-name = "ldo4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -174,7 +180,6 @@ ldo9_reg: ldo9 { /* VDD_RTC */ - vin-supply = <&vmain>; regulator-name = "ldo9"; regulator-min-microvolt = <840000>; regulator-max-microvolt = <1160000>; @@ -184,7 +189,6 @@ ldoln_reg: ldoln { /* VDDA_1V8_PLL */ - vin-supply = <&vmain>; regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -194,7 +198,6 @@ ldousb_reg: ldousb { /* VDDA_3V_USB: VDDA_USBHS33 */ - vin-supply = <&vmain>; regulator-name = "ldousb"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -204,7 +207,6 @@ ldortc_reg: ldortc { /* VDDA_RTC */ - vin-supply = <&vmain>; regulator-name = "ldortc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index cbc17b0..4128fa9 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -93,6 +93,10 @@ }; }; +&mmc1 { + status = "disabled"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; @@ -101,6 +105,10 @@ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; }; +&mmc3 { + status = "disabled"; +}; + &pincntl { sd1_pins: pinmux_sd1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 5d4313f..3f18486 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -45,6 +45,14 @@ phy-mode = "rgmii"; }; +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + status = "disabled"; +}; + &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&sd2_pins>; @@ -53,6 +61,7 @@ dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */ &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */ dma-names = "tx", "rx"; + non-removable; }; &pincntl { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e007401..3a8f397 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1451,6 +1451,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 4 0>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 4220eef..5e06020 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -107,8 +107,8 @@ reg = <0x58000000 0x80>, <0x58004054 0x4>, <0x58004300 0x20>, - <0x58005054 0x4>, - <0x58005300 0x20>; + <0x58009054 0x4>, + <0x58009300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index ddfe1f5..fa14f77 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -242,7 +242,7 @@ hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; ports { - port0 { + port { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -485,13 +485,20 @@ edid-emulation = <5>; ports { - port0 { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port1 { + port@1 { + reg = <1>; + bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index f9d2e4f..1de972d 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -163,7 +163,7 @@ hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { - port0 { + port { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -631,13 +631,20 @@ use-external-pwm; ports { - port0 { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port1 { + port@1 { + reg = <1>; + bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 76056ba..ed44982 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -85,7 +85,7 @@ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 41f5d38..f4f2ce4 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -188,6 +188,7 @@ vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index d6f839c..b697106 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -194,6 +194,12 @@ OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ >; }; + + mmc1_wp_pins: pinmux_mmc1_cd_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */ + >; + }; }; &i2c3 { @@ -250,3 +256,8 @@ }; }; }; + +&mmc1 { + pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */ +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index d9e2d9c..2b74a81 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -288,7 +288,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ @@ -300,7 +300,7 @@ modem_pins: pinmux_modem { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a00ca76..927b17f 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -97,7 +97,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ @@ -110,7 +110,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ @@ -120,7 +120,7 @@ modem_pins1: pinmux_modem_core1_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ + OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index f19170b..c29b41d 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -98,7 +98,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; @@ -107,7 +107,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; @@ -125,7 +125,7 @@ pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ - OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ >; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index dc759a3..5d5b620 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -14,6 +14,29 @@ display0 = &hdmi0; }; + vmain: fixedregulator-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vsys_cobra: fixedregulator-vsys_cobra { + compatible = "regulator-fixed"; + regulator-name = "vsys_cobra"; + vin-supply = <&vmain>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdds_1v8_main: fixedregulator-vdds_1v8_main { + compatible = "regulator-fixed"; + regulator-name = "vdds_1v8_main"; + vin-supply = <&smps7_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -309,7 +332,7 @@ wlcore_irq_pin: pinmux_wlcore_irq_pin { pinctrl-single,pins = < - OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; }; }; @@ -409,6 +432,26 @@ ti,ldo6-vibrator; + smps123-in-supply = <&vsys_cobra>; + smps45-in-supply = <&vsys_cobra>; + smps6-in-supply = <&vsys_cobra>; + smps7-in-supply = <&vsys_cobra>; + smps8-in-supply = <&vsys_cobra>; + smps9-in-supply = <&vsys_cobra>; + smps10_out2-in-supply = <&vsys_cobra>; + smps10_out1-in-supply = <&vsys_cobra>; + ldo1-in-supply = <&vsys_cobra>; + ldo2-in-supply = <&vsys_cobra>; + ldo3-in-supply = <&vdds_1v8_main>; + ldo4-in-supply = <&vdds_1v8_main>; + ldo5-in-supply = <&vsys_cobra>; + ldo6-in-supply = <&vdds_1v8_main>; + ldo7-in-supply = <&vsys_cobra>; + ldo8-in-supply = <&vsys_cobra>; + ldo9-in-supply = <&vmmcsd_fixed>; + ldoln-in-supply = <&vsys_cobra>; + ldousb-in-supply = <&vsys_cobra>; + regulators { smps123_reg: smps123 { /* VDD_OPP_MPU */ @@ -600,7 +643,8 @@ pinctrl-0 = <&twl6040_pins>; interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ + + /* audpwron gpio defined in the board specific dts */ vio-supply = <&smps7_reg>; v2v1-supply = <&smps9_reg>; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 46ecb1d..f75ce02 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -35,6 +35,22 @@ }; }; +/* LDO4 is VPP1 - ball AD9 */ +&ldo4_reg { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/* + * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33, + * VDDA_HDMI - ball AN25 + */ +&ldo7_reg { + status = "okay"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &omap5_pmx_core { i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < @@ -52,3 +68,13 @@ <&gpio7 3 0>; /* 195, SDA */ }; +&twl6040 { + ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */ + OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ + >; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 60b3fbb..a51e605 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -51,3 +51,13 @@ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ }; + +&twl6040 { + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index a3601e4..b844473 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -136,6 +136,7 @@ &gmac1 { status = "okay"; phy-mode = "rgmii"; + phy-handle = <&phy1>; snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>; snps,reset-active-low; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index ad8ba10..d294e82 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -24,18 +24,21 @@ compatible = "shared-dma-pool"; reg = <0x40000000 0x01000000>; no-map; + status = "disabled"; }; gp1_reserved: rproc@41000000 { compatible = "shared-dma-pool"; reg = <0x41000000 0x01000000>; no-map; + status = "disabled"; }; audio_reserved: rproc@42000000 { compatible = "shared-dma-pool"; reg = <0x42000000 0x01000000>; no-map; + status = "disabled"; }; dmu_reserved: rproc@43000000 { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 68b479b..73c133f 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -176,8 +176,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 360adfb..d6ad619 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -135,8 +135,6 @@ ®_dc1sw { regulator-name = "vcc-lcd-usb2"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; }; ®_dc5ldo { diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 10f49ab..47195e8 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -82,6 +82,7 @@ CONFIG_TOUCHSCREEN_MMS114=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=y CONFIG_INPUT_MAX8997_HAPTIC=y +CONFIG_KEYBOARD_SAMSUNG=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 8f85756..8a5fff1 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -264,6 +264,7 @@ CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_CROS_EC=m +CONFIG_KEYBOARD_SAMSUNG=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index df90bc5..8615216 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -486,7 +486,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = { static void smp_cross_call(const struct cpumask *target, unsigned int ipinr) { - trace_ipi_raise(target, ipi_types[ipinr]); + trace_ipi_raise_rcuidle(target, ipi_types[ipinr]); __smp_cross_call(target, ipinr); } diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index e65aa7d..20dcf6e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -61,7 +61,6 @@ config ARCH_EXYNOS4 select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select GIC_NON_BANKED - select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 (Cortex-A9) SoC based systems diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index a38b16b..b56de4b 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -46,7 +46,7 @@ static int ksz8081_phy_fixup(struct phy_device *dev) static void __init imx6ul_enet_phy_init(void) { if (IS_BUILTIN(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ8081, 0xffffffff, + phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK, ksz8081_phy_fixup); } diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 5d7fb59..bf60844 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -43,8 +43,8 @@ #define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) /* IRQ handler register bitmasks */ -#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE)) -#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1) +#define DEFERRED_FIQ_MASK OMAP_IRQ_BIT(INT_DEFERRED_FIQ) +#define GPIO_BANK1_MASK OMAP_IRQ_BIT(INT_GPIO_BANK1) /* Driver buffer byte offsets */ #define BUF_MASK (FIQ_MASK * 4) @@ -110,7 +110,7 @@ ENTRY(qwerty_fiqin_start) mov r8, #2 @ reset FIQ agreement str r8, [r12, #IRQ_CONTROL_REG_OFFSET] - cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt? + cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt? beq gpio @ yes - process it mov r8, #1 diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index d1f1209..ec760ae 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -109,7 +109,8 @@ void __init ams_delta_init_fiq(void) * Since no set_type() method is provided by OMAP irq chip, * switch to edge triggered interrupt type manually. */ - offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; + offset = IRQ_ILR0_REG_OFFSET + + ((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4; val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); @@ -149,7 +150,7 @@ void __init ams_delta_init_fiq(void) /* * Redirect GPIO interrupts to FIQ */ - offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; + offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4; val = omap_readl(OMAP_IH1_BASE + offset) | 1; omap_writel(val, OMAP_IH1_BASE + offset); } diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index adb5e76..6dfc3e1 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,6 +14,8 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H +#include <mach/irqs.h> + /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0517f0c..1a648e9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP3 select PM_OPP if PM select PM if CPU_IDLE select SOC_HAS_OMAP2_SDRC + select ARM_ERRATA_430973 config ARCH_OMAP4 bool "TI OMAP4" @@ -36,6 +37,7 @@ config ARCH_OMAP4 select PM if CPU_IDLE select ARM_ERRATA_754322 select ARM_ERRATA_775420 + select OMAP_INTERCONNECT config SOC_OMAP5 bool "TI OMAP5" @@ -67,6 +69,8 @@ config SOC_AM43XX select HAVE_ARM_SCU select GENERIC_CLOCKEVENTS_BROADCAST select HAVE_ARM_TWD + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 config SOC_DRA7XX bool "TI DRA7XX" @@ -240,4 +244,12 @@ endmenu endif +config OMAP5_ERRATA_801819 + bool "Errata 801819: An eviction from L1 data cache might stall indefinitely" + depends on SOC_OMAP5 || SOC_DRA7XX + help + A livelock can occur in the L2 cache arbitration that might prevent + a snoop from completing. Under certain conditions this can cause the + system to deadlock. + endmenu diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index af2851f..bae263f 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -46,6 +46,7 @@ #define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109 #define OMAP5_MON_AMBA_IF_INDEX 0x108 +#define OMAP5_DRA7_MON_SET_ACR_INDEX 0x107 /* Secure PPA(Primary Protected Application) APIs */ #define OMAP4_PPA_L2_POR_INDEX 0x23 diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index c625cc1..8cd1de9 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -50,6 +50,39 @@ void __iomem *omap4_get_scu_base(void) return scu_base; } +#ifdef CONFIG_OMAP5_ERRATA_801819 +void omap5_erratum_workaround_801819(void) +{ + u32 acr, revidr; + u32 acr_mask; + + /* REVIDR[3] indicates erratum fix available on silicon */ + asm volatile ("mrc p15, 0, %0, c0, c0, 6" : "=r" (revidr)); + if (revidr & (0x1 << 3)) + return; + + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + /* + * BIT(27) - Disables streaming. All write-allocate lines allocate in + * the L1 or L2 cache. + * BIT(25) - Disables streaming. All write-allocate lines allocate in + * the L1 cache. + */ + acr_mask = (0x3 << 25) | (0x3 << 27); + /* do we already have it done.. if yes, skip expensive smc */ + if ((acr & acr_mask) == acr_mask) + return; + + acr |= acr_mask; + omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr); + + pr_debug("%s: ARM erratum workaround 801819 applied on CPU%d\n", + __func__, smp_processor_id()); +} +#else +static inline void omap5_erratum_workaround_801819(void) { } +#endif + static void omap4_secondary_init(unsigned int cpu) { /* @@ -64,12 +97,15 @@ static void omap4_secondary_init(unsigned int cpu) omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX, 4, 0, 0, 0, 0, 0); - /* - * Configure the CNTFRQ register for the secondary cpu's which - * indicates the frequency of the cpu local timers. - */ - if (soc_is_omap54xx() || soc_is_dra7xx()) + if (soc_is_omap54xx() || soc_is_dra7xx()) { + /* + * Configure the CNTFRQ register for the secondary cpu's which + * indicates the frequency of the cpu local timers. + */ set_cntfreq(); + /* Configure ACR to disable streaming WA for 801819 */ + omap5_erratum_workaround_801819(); + } /* * Synchronise with the boot thread. @@ -218,6 +254,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (cpu_is_omap446x()) startup_addr = omap4460_secondary_startup; + if (soc_is_dra74x() || soc_is_omap54xx()) + omap5_erratum_workaround_801819(); /* * Write the address of secondary startup routine into the diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 78af6d8..daf2753 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -186,8 +186,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) trace_state = (PWRDM_TRACE_STATES_FLAG | ((next & OMAP_POWERSTATE_MASK) << 8) | ((prev & OMAP_POWERSTATE_MASK) << 0)); - trace_power_domain_target(pwrdm->name, trace_state, - smp_processor_id()); + trace_power_domain_target_rcuidle(pwrdm->name, + trace_state, + smp_processor_id()); } break; default: @@ -523,8 +524,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { /* Trace the pwrdm desired target state */ - trace_power_domain_target(pwrdm->name, pwrst, - smp_processor_id()); + trace_power_domain_target_rcuidle(pwrdm->name, pwrst, + smp_processor_id()); /* Program the pwrdm desired target state */ ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst); } diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c index 0ec2d00..eb350a6 100644 --- a/arch/arm/mach-omap2/powerdomains7xx_data.c +++ b/arch/arm/mach-omap2/powerdomains7xx_data.c @@ -36,14 +36,7 @@ static struct powerdomain iva_7xx_pwrdm = { .prcm_offs = DRA7XX_PRM_IVA_INST, .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, - .pwrsts_logic_ret = PWRSTS_OFF, .banks = 4, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* hwa_mem */ - [1] = PWRSTS_OFF_RET, /* sl2_mem */ - [2] = PWRSTS_OFF_RET, /* tcm1_mem */ - [3] = PWRSTS_OFF_RET, /* tcm2_mem */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* hwa_mem */ [1] = PWRSTS_ON, /* sl2_mem */ @@ -76,12 +69,7 @@ static struct powerdomain ipu_7xx_pwrdm = { .prcm_offs = DRA7XX_PRM_IPU_INST, .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, - .pwrsts_logic_ret = PWRSTS_OFF, .banks = 2, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* aessmem */ - [1] = PWRSTS_OFF_RET, /* periphmem */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* aessmem */ [1] = PWRSTS_ON, /* periphmem */ @@ -95,11 +83,7 @@ static struct powerdomain dss_7xx_pwrdm = { .prcm_offs = DRA7XX_PRM_DSS_INST, .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, - .pwrsts_logic_ret = PWRSTS_OFF, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* dss_mem */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* dss_mem */ }, @@ -111,13 +95,8 @@ static struct powerdomain l4per_7xx_pwrdm = { .name = "l4per_pwrdm", .prcm_offs = DRA7XX_PRM_L4PER_INST, .prcm_partition = DRA7XX_PRM_PARTITION, - .pwrsts = PWRSTS_RET_ON, - .pwrsts_logic_ret = PWRSTS_RET, + .pwrsts = PWRSTS_ON, .banks = 2, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* nonretained_bank */ - [1] = PWRSTS_OFF_RET, /* retained_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* nonretained_bank */ [1] = PWRSTS_ON, /* retained_bank */ @@ -132,9 +111,6 @@ static struct powerdomain gpu_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* gpu_mem */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* gpu_mem */ }, @@ -148,8 +124,6 @@ static struct powerdomain wkupaon_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_ON, .banks = 1, - .pwrsts_mem_ret = { - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* wkup_bank */ }, @@ -161,15 +135,7 @@ static struct powerdomain core_7xx_pwrdm = { .prcm_offs = DRA7XX_PRM_CORE_INST, .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_ON, - .pwrsts_logic_ret = PWRSTS_RET, .banks = 5, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* core_nret_bank */ - [1] = PWRSTS_OFF_RET, /* core_ocmram */ - [2] = PWRSTS_OFF_RET, /* core_other_bank */ - [3] = PWRSTS_OFF_RET, /* ipu_l2ram */ - [4] = PWRSTS_OFF_RET, /* ipu_unicache */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* core_nret_bank */ [1] = PWRSTS_ON, /* core_ocmram */ @@ -226,11 +192,7 @@ static struct powerdomain vpe_7xx_pwrdm = { .prcm_offs = DRA7XX_PRM_VPE_INST, .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, - .pwrsts_logic_ret = PWRSTS_OFF, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* vpe_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* vpe_bank */ }, @@ -260,14 +222,8 @@ static struct powerdomain l3init_7xx_pwrdm = { .name = "l3init_pwrdm", .prcm_offs = DRA7XX_PRM_L3INIT_INST, .prcm_partition = DRA7XX_PRM_PARTITION, - .pwrsts = PWRSTS_RET_ON, - .pwrsts_logic_ret = PWRSTS_RET, + .pwrsts = PWRSTS_ON, .banks = 3, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* gmac_bank */ - [1] = PWRSTS_OFF_RET, /* l3init_bank1 */ - [2] = PWRSTS_OFF_RET, /* l3init_bank2 */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* gmac_bank */ [1] = PWRSTS_ON, /* l3init_bank1 */ @@ -283,9 +239,6 @@ static struct powerdomain eve3_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* eve3_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* eve3_bank */ }, @@ -299,9 +252,6 @@ static struct powerdomain emu_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* emu_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* emu_bank */ }, @@ -314,11 +264,6 @@ static struct powerdomain dsp2_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 3, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* dsp2_edma */ - [1] = PWRSTS_OFF_RET, /* dsp2_l1 */ - [2] = PWRSTS_OFF_RET, /* dsp2_l2 */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* dsp2_edma */ [1] = PWRSTS_ON, /* dsp2_l1 */ @@ -334,11 +279,6 @@ static struct powerdomain dsp1_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 3, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* dsp1_edma */ - [1] = PWRSTS_OFF_RET, /* dsp1_l1 */ - [2] = PWRSTS_OFF_RET, /* dsp1_l2 */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* dsp1_edma */ [1] = PWRSTS_ON, /* dsp1_l1 */ @@ -354,9 +294,6 @@ static struct powerdomain cam_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* vip_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* vip_bank */ }, @@ -370,9 +307,6 @@ static struct powerdomain eve4_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* eve4_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* eve4_bank */ }, @@ -386,9 +320,6 @@ static struct powerdomain eve2_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* eve2_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* eve2_bank */ }, @@ -402,9 +333,6 @@ static struct powerdomain eve1_7xx_pwrdm = { .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, .banks = 1, - .pwrsts_mem_ret = { - [0] = PWRSTS_OFF_RET, /* eve1_bank */ - }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* eve1_bank */ }, diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 5b385bb..cb9497a 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -496,8 +496,7 @@ void __init omap_init_time(void) __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", 2, "timer_sys_ck", NULL, false); - if (of_have_populated_dt()) - clocksource_probe(); + clocksource_probe(); } #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) @@ -505,6 +504,8 @@ void __init omap3_secure_sync32k_timer_init(void) { __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure", 2, "timer_sys_ck", NULL, false); + + clocksource_probe(); } #endif /* CONFIG_ARCH_OMAP3 */ @@ -513,6 +514,8 @@ void __init omap3_gptimer_timer_init(void) { __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, 1, "timer_sys_ck", "ti,timer-alwon", true); + + clocksource_probe(); } #endif diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 84baa16..e93aa67 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -68,7 +68,7 @@ #include <linux/platform_data/asoc-s3c.h> #include <linux/platform_data/spi-s3c64xx.h> -static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); +#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) })) /* AC97 */ #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index 3a4e9a2..fbafa24 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -125,7 +125,7 @@ #size-cells = <1>; #interrupts-cells = <3>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 46f325a..d7f8e06 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -163,7 +163,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index af4884b..15508df 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -398,7 +398,7 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p) gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay); gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, - GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay); + GPMC_CONFIG4_WEEXTRADELAY, p->we_extra_delay); gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6, GPMC_CONFIG6_CYCLE2CYCLESAMECSEN, p->cycle2cyclesamecsen); |