diff options
author | Vasily Khoruzhick <anarsoul@gmail.com> | 2010-09-08 09:39:46 (GMT) |
---|---|---|
committer | Ben Dooks <ben-linux@fluff.org> | 2010-09-25 23:45:18 (GMT) |
commit | 14477095abc661a9f195ca4733bb739c54794b32 (patch) | |
tree | 92b4da26c1c7f1349706819756895e462f7bbdd7 | |
parent | 56162badadb91aae93843d8d6558c7d7780e3cb2 (diff) | |
download | linux-14477095abc661a9f195ca4733bb739c54794b32.tar.xz |
ARM: h1940: Use gpiolib for latch access
This patch adds gpiolib support for h1940 latch.
With this patch it's possible to use leds-gpio and uda1380
drivers (they require gpiolib support for appropriate pins).
And now it's possible to drop leds-h1940 driver.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-rw-r--r-- | arch/arm/mach-s3c2410/h1940-bluetooth.c | 13 | ||||
-rw-r--r-- | arch/arm/mach-s3c2410/include/mach/h1940-latch.h | 57 | ||||
-rw-r--r-- | arch/arm/mach-s3c2410/mach-h1940.c | 64 | ||||
-rw-r--r-- | arch/arm/plat-s3c24xx/Kconfig | 1 |
4 files changed, 87 insertions, 48 deletions
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 8cdeb14..8aa2f19 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -30,7 +30,7 @@ static void h1940bt_enable(int on) { if (on) { /* Power on the chip */ - h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); + gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1); /* Reset the chip */ mdelay(10); @@ -43,7 +43,7 @@ static void h1940bt_enable(int on) mdelay(10); gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); - h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); + gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0); } } @@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); if (ret) { - dev_err(&pdev->dev, "could not get GPH1\n");\ + dev_err(&pdev->dev, "could not get GPH1\n"); + return ret; + } + + ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev)); + if (ret) { + gpio_free(S3C2410_GPH(1)); + dev_err(&pdev->dev, "could not get BT_POWER\n"); return ret; } diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index d8a8327..73586f2 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -14,51 +14,30 @@ #ifndef __ASM_ARCH_H1940_LATCH_H #define __ASM_ARCH_H1940_LATCH_H +#include <mach/gpio.h> -#ifndef __ASSEMBLY__ -#define H1940_LATCH ((void __force __iomem *)0xF8000000) -#else -#define H1940_LATCH 0xF8000000 -#endif - -#define H1940_PA_LATCH (S3C2410_CS2) +#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) /* SD layer latch */ -#define H1940_LATCH_SDQ1 (1<<16) -#define H1940_LATCH_LCD_P1 (1<<17) -#define H1940_LATCH_LCD_P2 (1<<18) -#define H1940_LATCH_LCD_P3 (1<<19) -#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ -#define H1940_LATCH_LED_RED (1<<21) -#define H1940_LATCH_SDQ7 (1<<22) -#define H1940_LATCH_USB_DP (1<<23) +#define H1940_LATCH_SDQ1 H1940_LATCH_GPIO(0) +#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1) +#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2) +#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3) +#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4) +#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5) +#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6) +#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7) /* CPU layer latch */ -#define H1940_LATCH_UDA_POWER (1<<24) -#define H1940_LATCH_AUDIO_POWER (1<<25) -#define H1940_LATCH_SM803_ENABLE (1<<26) -#define H1940_LATCH_LCD_P4 (1<<27) -#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ -#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ -#define H1940_LATCH_LED_GREEN (1<<30) -#define H1940_LATCH_LED_FLASH (1<<31) - -/* default settings */ - -#define H1940_LATCH_DEFAULT \ - H1940_LATCH_LCD_P4 | \ - H1940_LATCH_SM803_ENABLE | \ - H1940_LATCH_SDQ1 | \ - H1940_LATCH_LCD_P1 | \ - H1940_LATCH_LCD_P2 | \ - H1940_LATCH_LCD_P3 | \ - H1940_LATCH_MAX1698_nSHUTDOWN | \ - H1940_LATCH_CPUQ5 - -/* control functions */ - -extern void h1940_latch_control(unsigned int clear, unsigned int set); +#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8) +#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9) +#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10) +#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11) +#define H1940_LATCH_CPUQ5 H1940_LATCH_GPIO(12) +#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13) +#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) +#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) #endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 3ba3bab..f0493bd 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -59,6 +59,12 @@ #include <plat/mci.h> #include <plat/ts.h> +#define H1940_LATCH ((void __force __iomem *)0xF8000000) + +#define H1940_PA_LATCH S3C2410_CS2 + +#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END)) + static struct map_desc h1940_iodesc[] __initdata = { [0] = { .virtual = (unsigned long)H1940_LATCH, @@ -100,9 +106,16 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = { /* Board control latch control */ -static unsigned int latch_state = H1940_LATCH_DEFAULT; +static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) | + H1940_LATCH_BIT(H1940_LATCH_SM803_ENABLE) | + H1940_LATCH_BIT(H1940_LATCH_SDQ1) | + H1940_LATCH_BIT(H1940_LATCH_LCD_P1) | + H1940_LATCH_BIT(H1940_LATCH_LCD_P2) | + H1940_LATCH_BIT(H1940_LATCH_LCD_P3) | + H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN) | + H1940_LATCH_BIT(H1940_LATCH_CPUQ5); -void h1940_latch_control(unsigned int clear, unsigned int set) +static void h1940_latch_control(unsigned int clear, unsigned int set) { unsigned long flags; @@ -116,7 +129,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set) local_irq_restore(flags); } -EXPORT_SYMBOL_GPL(h1940_latch_control); +static inline int h1940_gpiolib_to_latch(int offset) +{ + return 1 << (offset + 16); +} + +static void h1940_gpiolib_latch_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + int latch_bit = h1940_gpiolib_to_latch(offset); + + h1940_latch_control(value ? 0 : latch_bit, + value ? latch_bit : 0); +} + +static int h1940_gpiolib_latch_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + h1940_gpiolib_latch_set(chip, offset, value); + return 0; +} + +static int h1940_gpiolib_latch_get(struct gpio_chip *chip, + unsigned offset) +{ + return (latch_state >> (offset + 16)) & 1; +} + +struct gpio_chip h1940_latch_gpiochip = { + .base = H1940_LATCH_GPIO(0), + .owner = THIS_MODULE, + .label = "H1940_LATCH", + .ngpio = 16, + .direction_output = h1940_gpiolib_latch_output, + .set = h1940_gpiolib_latch_set, + .get = h1940_gpiolib_latch_get, +}; static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) { @@ -125,10 +173,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - h1940_latch_control(0, H1940_LATCH_USB_DP); + gpio_set_value(H1940_LATCH_USB_DP, 1); break; case S3C2410_UDC_P_DISABLE : - h1940_latch_control(H1940_LATCH_USB_DP, 0); + gpio_set_value(H1940_LATCH_USB_DP, 0); break; case S3C2410_UDC_P_RESET : break; @@ -303,6 +351,8 @@ static void __init h1940_map_io(void) memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif s3c_pm_init(); + + WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -342,9 +392,11 @@ static void __init h1940_init(void) gpio_request(S3C2410_GPC(0), "LCD power"); gpio_request(S3C2410_GPC(5), "LCD power"); gpio_request(S3C2410_GPC(6), "LCD power"); - gpio_direction_input(S3C2410_GPC(6)); + gpio_request(H1940_LATCH_USB_DP, "USB pullup"); + gpio_direction_output(H1940_LATCH_USB_DP, 0); + platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 984bf66..5a27b1b 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA int default 128 if S3C24XX_GPIO_EXTRA128 default 64 if S3C24XX_GPIO_EXTRA64 + default 16 if ARCH_H1940 default 0 config S3C24XX_GPIO_EXTRA64 |