Merge tag 'sunxi-dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner DT additions for 3.17" from Maxime Ripard:

Among the few patches that we have so far, there's a few noticeable changes:
 - Introduction of the Allwinner A23 SoC
 - Support for the GMAC on the A31. This is only available so far on the
   boards which bootloader enable the PHY regulator.
 - Addition of the infrared receiver

* tag 'sunxi-dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (22 commits)
  ARM: dts: sun6i: Add Merrii A31 Hummingbird support
  ARM: dts: sun6i: Add ethernet alias for GMAC
  ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller node
  ARM: dts: sun6i: Add GMAC clock node to the A31 dtsi
  ARM: dts: sun6i: Add pin muxing options for GMAC
  ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
  ARM: sun8i: Add reset controller nodes to the DTSI
  ARM: sun8i: Add basic clock nodes to the DTSI
  ARM: dts: sun4i: Add ir node to various boards
  ARM: dts: sun4i: Add ir controller nodes and pinmux
  ARM: dts: sun4i: Add new ba10-tvbox board
  ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3
  ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox
  ARM: dts: sun7i: Rename sun7i-a20-ir to sun4i-a10-ir
  ARM: dts: sun7i: Add AXP209 support to various boards
  ARM: dts: sun4i: Add AXP209 support to various boards
  ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes
  ARM: sun8i: dt: Add Ippo-q8h v5 support
  ARM: sunxi: Add Allwinner A23 dtsi
  ARM: sunxi: Add IR controllers on A20 to dtsi
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

22 files changed, 1121 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fc7f75a..4a9dc97 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -381,6 +381,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
 	stih416-b2020e.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
@@ -395,12 +396,16 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
 	sun6i-a31-m9.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-i12-tvbox.dtb \
-	sun7i-a20-olinuxino-micro.dtb
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-pcduino3.dtb
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-ippo-q8h-v5.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
 	tegra20-medcom-wide.dtb \
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 0b97c07..9e99ade 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -88,6 +88,12 @@
 			};
 		};
 
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
@@ -98,6 +104,15 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 0000000..1763cc7
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			usb2_vbus_pin_a: usb2_vbus_pin@0 {
+				allwinner,pins = "PH12";
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		gpio = <&pio 7 12 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index c200eac..3ce56bfb 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -80,6 +80,12 @@
 			};
 		};
 
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
@@ -90,6 +96,15 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 547fadc..891ea44 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -87,11 +87,32 @@
 			};
 		};
 
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
 	};
 
 	reg_emac_3v3: emac-3v3 {
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index f13723e..6b0c378 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -40,12 +40,6 @@
 			status = "okay";
 		};
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
 		usbphy: phy@01c13400 {
 			usb1_vbus-supply = <&reg_usb1_vbus>;
 			usb2_vbus-supply = <&reg_usb2_vbus>;
@@ -67,6 +61,21 @@
 		ohci1: usb@01c1c400 {
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index c01cea5..b9ecce6 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -52,11 +52,39 @@
 			status = "okay";
 		};
 
+		pinctrl@01c20800 {
+			ir0_pins_a: ir0@0 {
+				/* The ir receiver is not always populated */
+				allwinner,pull = <1>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index d46a7db..d046d56 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -91,6 +91,21 @@
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index fb03bcc..6675bcd 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -76,6 +76,15 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index d96e179..459cb63 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -509,7 +509,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
+			#interrupt-cells = <2>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
@@ -593,6 +593,20 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <1>;
 			};
+
+			ir0_pins_a: ir0@0 {
+				allwinner,pins = "PB3","PB4";
+				allwinner,function = "ir0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			ir1_pins_a: ir1@0 {
+				allwinner,pins = "PB22","PB23";
+				allwinner,function = "ir1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -621,6 +635,24 @@
 			status = "disabled";
 		};
 
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@01c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index b64f705..24b0ad3 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -422,7 +422,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
+			#interrupt-cells = <2>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 3b2a94c..bf86e65 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -395,7 +395,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
+			#interrupt-cells = <2>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
new file mode 100644
index 0000000..f142065
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+			vmmc-supply = <&reg_vcc3v0>;
+			bus-width = <4>;
+			cd-gpios = <&pio 0 8 0>; /* PA8 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c19400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c1a000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c1a400 {
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			mmc0_pins_a: mmc0@0 {
+				/* external pull-ups missing for some pins */
+				allwinner,pull = <1>;
+			};
+
+			mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+				allwinner,pins = "PA8";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH24";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			/* pull-ups and devices require AXP221 DLDO3 */
+			status = "failed";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+
+			pcf8563: rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		gmac: ethernet@01c30000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		gpio = <&pio 7 24 0>; /* PH24 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index a9dfa12..44b07e5 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -23,6 +23,7 @@
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
+		ethernet0 = &gmac;
 	};
 
 
@@ -281,6 +282,34 @@
 					     "usb_ohci0", "usb_ohci1",
 					     "usb_ohci2";
 		};
+
+		/*
+		 * The following two are dummy clocks, placeholders used in the gmac_tx
+		 * clock. The gmac driver will choose one parent depending on the PHY
+		 * interface mode, using clk_set_rate auto-reparenting.
+		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk@1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk@2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@01c200d0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c200d0 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
 	};
 
 	soc@01c00000 {
@@ -429,7 +458,7 @@
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
+			#interrupt-cells = <2>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
@@ -467,6 +496,48 @@
 				allwinner,drive = <2>;
 				allwinner,pull = <0>;
 			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				allwinner,function = "gmac";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			gmac_pins_gmii_a: gmac_gmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <3>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		ahb1_rst: reset@01c202c0 {
@@ -621,6 +692,23 @@
 			status = "disabled";
 		};
 
+		gmac: ethernet@01c30000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c30000 0x1054>;
+			interrupts = <0 82 4>;
+			interrupt-names = "macirq";
+			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ahb1_rst 17>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		timer@01c60000 {
 			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
@@ -756,7 +844,7 @@
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
+			#interrupt-cells = <2>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 		};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index a5ad945..5368098 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -66,6 +66,12 @@
 			};
 		};
 
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
@@ -76,6 +82,16 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index b87fea9..a6c1a3c 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -100,6 +100,12 @@
 			status = "okay";
 		};
 
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
@@ -110,6 +116,16 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index b77308e..6a67712 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -94,12 +94,34 @@
 			};
 		};
 
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		gmac: ethernet@01c50000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&gmac_pins_mii_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index b759630..9d669cdf 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -122,6 +122,16 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
new file mode 100644
index 0000000..046dfc0
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
+				allwinner,pins = "PH2";
+			};
+
+			led_pins_pcduino3: led_pins@0 {
+				allwinner,pins = "PH15", "PH16";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			key_pins_pcduino3: key_pins@0 {
+				allwinner,pins = "PH17", "PH18", "PH19";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino3>;
+
+		tx {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_pcduino3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@0 {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+		button@1 {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_ahci_5v: ahci-5v {
+		gpio = <&pio 7 2 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 01e9466..4011628 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -586,7 +586,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
+			#interrupt-cells = <2>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
@@ -738,6 +738,20 @@
 				allwinner,drive = <2>;
 				allwinner,pull = <0>;
 			};
+
+			ir0_pins_a: ir0@0 {
+				    allwinner,pins = "PB3","PB4";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <0>;
+				    allwinner,pull = <0>;
+			};
+
+			ir1_pins_a: ir1@0 {
+				    allwinner,pins = "PB22","PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <0>;
+				    allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -771,6 +785,24 @@
 			status = "disabled";
 		};
 
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <0 5 4>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@01c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <0 6 4>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun7i-a20-sid";
 			reg = <0x01c23800 0x200>;
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
new file mode 100644
index 0000000..34002e3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun8i-a23.dtsi"
+
+/ {
+	model = "Ippo Q8H Dual Core Tablet (v5)";
+	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		r_uart: serial@01f02800 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
new file mode 100644
index 0000000..54ac0787
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &r_uart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		/* dummy clock until actually implemented */
+		pll6: pll6_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <600000000>;
+			clock-output-names = "pll6";
+		};
+
+		cpu: cpu_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1_mux: ahb1_mux_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+			clock-output-names = "ahb1_mux";
+		};
+
+		ahb1: ahb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1_mux>;
+			clock-output-names = "ahb1";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+					"ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_spinlock",
+					"ahb1_drc";
+		};
+
+		apb1_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_pio",
+					"apb1_daudio0",	"apb1_daudio1";
+		};
+
+		apb2_mux: apb2_mux_clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+			clock-output-names = "apb2_mux";
+		};
+
+		apb2: apb2_clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-apb2-div-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb2_mux>;
+			clock-output-names = "apb2";
+		};
+
+		apb2_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2",
+					"apb2_uart3", "apb2_uart4";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ahb1_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <0 18 4>,
+				     <0 19 4>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <0 25 4>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <0 0 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			resets = <&apb2_rst 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <0 1 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			resets = <&apb2_rst 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <0 2 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			resets = <&apb2_rst 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <0 3 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			resets = <&apb2_rst 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <0 4 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			resets = <&apb2_rst 20>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		r_uart: serial@01f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <0 38 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+	};
+};