diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-22 04:36:46 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-22 04:36:46 (GMT) |
commit | 3b9abc7e48561b0b140ee267e190bc1031f82ff3 (patch) | |
tree | ec5d8174f89cb8555c74eb3eb770054aa22fc724 | |
parent | 0cda56962b883cd5e7aa036350e5a0283a88c590 (diff) | |
parent | 0c73c08ec73dbe080b9ec56696ee21d32754d918 (diff) | |
download | linux-3b9abc7e48561b0b140ee267e190bc1031f82ff3.tar.xz |
Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
TTY: ldisc, wait for ldisc infinitely in hangup
TTY: ldisc, move wait idle to caller
TTY: ldisc, allow waiting for ldisc arbitrarily long
Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs"
RS485: fix inconsistencies in the meaning of some variables
pch_uart: Fix DMA resource leak issue
serial,mfd: Fix CMSPAR setup
tty/serial: Prevent drop of DCD on suspend for Tegra UARTs
pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
pch_uart: Support new device LAPIS Semiconductor ML7831 IOH
pch_uart: Fix hw-flow control issue
tty: hvc_dcc: Fix duplicate character inputs
jsm: Change maintainership
-rw-r--r-- | Documentation/serial/serial-rs485.txt | 14 | ||||
-rw-r--r-- | MAINTAINERS | 2 | ||||
-rw-r--r-- | drivers/tty/hvc/hvc_dcc.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 14 | ||||
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 16 | ||||
-rw-r--r-- | drivers/tty/serial/crisv10.c | 10 | ||||
-rw-r--r-- | drivers/tty/serial/mfd.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/pch_uart.c | 19 | ||||
-rw-r--r-- | drivers/tty/tty_ldisc.c | 30 | ||||
-rw-r--r-- | include/linux/serial.h | 14 |
10 files changed, 72 insertions, 53 deletions
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 079cb3d..41c8378 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt @@ -97,15 +97,23 @@ struct serial_rs485 rs485conf; - /* Set RS485 mode: */ + /* Enable RS485 mode: */ rs485conf.flags |= SER_RS485_ENABLED; + /* Set logical level for RTS pin equal to 1 when sending: */ + rs485conf.flags |= SER_RS485_RTS_ON_SEND; + /* or, set logical level for RTS pin equal to 0 when sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND); + + /* Set logical level for RTS pin equal to 1 after sending: */ + rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; + /* or, set logical level for RTS pin equal to 0 after sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); + /* Set rts delay before send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND; rs485conf.delay_rts_before_send = ...; /* Set rts delay after send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; rs485conf.delay_rts_after_send = ...; /* Set this flag if you want to receive data even whilst sending data */ diff --git a/MAINTAINERS b/MAINTAINERS index 165205b..3523ab0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3728,7 +3728,7 @@ F: fs/jbd2/ F: include/linux/jbd2.h JSM Neo PCI based serial card -M: Breno Leitao <leitao@linux.vnet.ibm.com> +M: Lucas Tavares <lucaskt@linux.vnet.ibm.com> L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial/jsm/ diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 435f6fa..44fbeba 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -46,6 +46,7 @@ static inline char __dcc_getchar(void) asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" : "=r" (__c)); + isb(); return __c; } @@ -55,6 +56,7 @@ static inline void __dcc_putchar(char c) asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" : /* no output register */ : "r" (c)); + isb(); } static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5f479da..925a1e5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1560,7 +1560,7 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART" + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" depends on PCI select SERIAL_CORE help @@ -1568,12 +1568,12 @@ config SERIAL_PCH_UART which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7213 and ML7223. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is - for MP(Media Phone) use. - ML7213/ML7223 is companion chip for Intel Atom E6xx series. - ML7213/ML7223 is completely compatible for Intel EG20T PCH. + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4a0f86f..4c823f3 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -228,7 +228,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + if ((rs485conf->delay_rts_after_send) > 0) UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { @@ -304,7 +304,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1228,7 +1228,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1447,16 +1447,6 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port, rs485conf->delay_rts_after_send = rs485_delay[1]; rs485conf->flags = 0; - if (rs485conf->delay_rts_before_send == 0 && - rs485conf->delay_rts_after_send == 0) { - rs485conf->flags |= SER_RS485_RTS_ON_SEND; - } else { - if (rs485conf->delay_rts_before_send) - rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND; - if (rs485conf->delay_rts_after_send) - rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) rs485conf->flags |= SER_RS485_RX_DURING_TX; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index b743504..1dfba7b 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3234,9 +3234,8 @@ rs_write(struct tty_struct *tty, e100_disable_rx(info); e100_enable_rx_irq(info); #endif - if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && - (info->rs485.delay_rts_before_send > 0)) - msleep(info->rs485.delay_rts_before_send); + if (info->rs485.delay_rts_before_send > 0) + msleep(info->rs485.delay_rts_before_send); } #endif /* CONFIG_ETRAX_RS485 */ @@ -3693,10 +3692,6 @@ rs_ioctl(struct tty_struct *tty, rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; rs485data.flags = 0; - if (rs485data.delay_rts_before_send != 0) - rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); if (rs485ctrl.enabled) rs485data.flags |= SER_RS485_ENABLED; @@ -4531,7 +4526,6 @@ static int __init rs_init(void) /* Set sane defaults */ info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); info->rs485.delay_rts_before_send = 0; info->rs485.flags &= ~(SER_RS485_ENABLED); #endif diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 286c386..e272d39 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -884,7 +884,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, { struct uart_hsu_port *up = container_of(port, struct uart_hsu_port, port); - struct tty_struct *tty = port->state->port.tty; unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -907,8 +906,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, } /* CMSPAR isn't supported by this driver */ - if (tty) - tty->termios->c_cflag &= ~CMSPAR; + termios->c_cflag &= ~CMSPAR; if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 21febef..d6aba8c 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1,5 +1,5 @@ /* - *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * *This program is free software; you can redistribute it and/or modify *it under the terms of the GNU General Public License as published by @@ -46,8 +46,8 @@ enum { /* Set the max number of UART port * Intel EG20T PCH: 4 port - * OKI SEMICONDUCTOR ML7213 IOH: 3 port - * OKI SEMICONDUCTOR ML7223 IOH: 2 port + * LAPIS Semiconductor ML7213 IOH: 3 port + * LAPIS Semiconductor ML7223 IOH: 2 port */ #define PCH_UART_NR 4 @@ -258,6 +258,8 @@ enum pch_uart_num_t { pch_ml7213_uart2, pch_ml7223_uart0, pch_ml7223_uart1, + pch_ml7831_uart0, + pch_ml7831_uart1, }; static struct pch_uart_driver_data drv_dat[] = { @@ -270,6 +272,8 @@ static struct pch_uart_driver_data drv_dat[] = { [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, [pch_ml7223_uart0] = {PCH_UART_8LINE, 0}, [pch_ml7223_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7831_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7831_uart1] = {PCH_UART_2LINE, 1}, }; static unsigned int default_baud = 9600; @@ -628,6 +632,7 @@ static void pch_request_dma(struct uart_port *port) dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", __func__); dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; return; } @@ -1215,8 +1220,7 @@ static void pch_uart_shutdown(struct uart_port *port) dev_err(priv->port.dev, "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); - if (priv->use_dma_flag) - pch_free_dma(port); + pch_free_dma(port); free_irq(priv->port.irq, priv); } @@ -1280,6 +1284,7 @@ static void pch_uart_set_termios(struct uart_port *port, if (rtn) goto out; + pch_uart_set_mctrl(&priv->port, priv->port.mctrl); /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -1552,6 +1557,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { .driver_data = pch_ml7223_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D), .driver_data = pch_ml7223_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811), + .driver_data = pch_ml7831_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812), + .driver_data = pch_ml7831_uart1}, {0,}, }; diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 512c49f..8e0924f 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -36,6 +36,7 @@ #include <linux/kmod.h> #include <linux/nsproxy.h> +#include <linux/ratelimit.h> /* * This guards the refcounted line discipline lists. The lock @@ -547,15 +548,16 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) /** * tty_ldisc_wait_idle - wait for the ldisc to become idle * @tty: tty to wait for + * @timeout: for how long to wait at most * * Wait for the line discipline to become idle. The discipline must * have been halted for this to guarantee it remains idle. */ -static int tty_ldisc_wait_idle(struct tty_struct *tty) +static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout) { - int ret; + long ret; ret = wait_event_timeout(tty_ldisc_idle, - atomic_read(&tty->ldisc->users) == 1, 5 * HZ); + atomic_read(&tty->ldisc->users) == 1, timeout); if (ret < 0) return ret; return ret > 0 ? 0 : -EBUSY; @@ -665,7 +667,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_ldisc_flush_works(tty); - retval = tty_ldisc_wait_idle(tty); + retval = tty_ldisc_wait_idle(tty, 5 * HZ); tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -762,8 +764,6 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; - WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); - tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; @@ -838,7 +838,7 @@ void tty_ldisc_hangup(struct tty_struct *tty) tty_unlock(); cancel_work_sync(&tty->buf.work); mutex_unlock(&tty->ldisc_mutex); - +retry: tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -847,6 +847,22 @@ void tty_ldisc_hangup(struct tty_struct *tty) it means auditing a lot of other paths so this is a FIXME */ if (tty->ldisc) { /* Not yet closed */ + if (atomic_read(&tty->ldisc->users) != 1) { + char cur_n[TASK_COMM_LEN], tty_n[64]; + long timeout = 3 * HZ; + tty_unlock(); + + while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) { + timeout = MAX_SCHEDULE_TIMEOUT; + printk_ratelimited(KERN_WARNING + "%s: waiting (%s) for %s took too long, but we keep waiting...\n", + __func__, get_task_comm(cur_n, current), + tty_name(tty, tty_n)); + } + mutex_unlock(&tty->ldisc_mutex); + goto retry; + } + if (reset == 0) { if (!tty_ldisc_reinit(tty, tty->termios->c_line)) diff --git a/include/linux/serial.h b/include/linux/serial.h index 97ff8e2..3d86517 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -207,13 +207,15 @@ struct serial_icounter_struct { struct serial_rs485 { __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) -#define SER_RS485_RTS_ON_SEND (1 << 1) -#define SER_RS485_RTS_AFTER_SEND (1 << 2) -#define SER_RS485_RTS_BEFORE_SEND (1 << 3) +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Milliseconds */ - __u32 delay_rts_after_send; /* Milliseconds */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; |