diff options
author | Linus Torvalds <torvalds@g5.osdl.org> | 2006-07-31 20:39:52 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-07-31 20:39:52 (GMT) |
commit | 49b1e3ea19b1c95c2f012b8331ffb3b169e4c042 (patch) | |
tree | 4ccf519a20c9b5bb3701c8b4d38b01af8bef854e | |
parent | ce38cac48209d270d07fd6d1a8e94446b37abcd5 (diff) | |
parent | 8d950cb8896fc95a9444d190885779438bb9d01c (diff) | |
download | linux-49b1e3ea19b1c95c2f012b8331ffb3b169e4c042.tar.xz |
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Minor comment fix for misc_64.S
[POWERPC] Use H_CEDE on non-SMT
[POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs
[POWERPC] PMAC_APM_EMU should depend on ADB_PMU
[POWERPC] Fix new interrupt code (MPIC detection)
[POWERPC] Fix new interrupt code (MPIC endianness)
[POWERPC] Add cpufreq support for Xserve G5
[POWERPC] Xserve G5 thermal control fixes
[POWERPC] Fix mem= handling when the memory limit is > RMO size
[POWERPC] More offb/bootx fixes
[POWERPC] Fix legacy_serial.c error handling on 32 bits
[POWERPC] Fix default clock for udbg_16550
[POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set
[POWERPC] Fix 32 bits warning in prom_init.c
[POWERPC] Workaround Pegasos incorrect ISA "ranges"
[POWERPC] fix up front-LED Kconfig
-rw-r--r-- | arch/powerpc/Kconfig | 2 | ||||
-rw-r--r-- | arch/powerpc/configs/pmac32_defconfig | 112 | ||||
-rw-r--r-- | arch/powerpc/kernel/head_64.S | 35 | ||||
-rw-r--r-- | arch/powerpc/kernel/legacy_serial.c | 13 | ||||
-rw-r--r-- | arch/powerpc/kernel/misc_64.S | 2 | ||||
-rw-r--r-- | arch/powerpc/kernel/prom_init.c | 36 | ||||
-rw-r--r-- | arch/powerpc/kernel/smp.c | 24 | ||||
-rw-r--r-- | arch/powerpc/kernel/udbg_16550.c | 6 | ||||
-rw-r--r-- | arch/powerpc/mm/lmb.c | 3 | ||||
-rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 12 | ||||
-rw-r--r-- | arch/powerpc/platforms/maple/setup.c | 17 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/bootx_init.c | 35 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/cpufreq_64.c | 78 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/setup.c | 6 | ||||
-rw-r--r-- | drivers/ide/Kconfig | 14 | ||||
-rw-r--r-- | drivers/macintosh/Kconfig | 11 | ||||
-rw-r--r-- | drivers/macintosh/therm_pm72.c | 218 | ||||
-rw-r--r-- | drivers/macintosh/therm_pm72.h | 33 | ||||
-rw-r--r-- | drivers/macintosh/via-pmu-led.c | 2 | ||||
-rw-r--r-- | drivers/video/offb.c | 307 |
20 files changed, 703 insertions, 263 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2643dbc..13e583f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -504,7 +504,7 @@ config CPU_FREQ_PMAC config CPU_FREQ_PMAC64 bool "Support for some Apple G5s" - depends on CPU_FREQ && PMAC_SMU && PPC64 + depends on CPU_FREQ && PPC64 select CPU_FREQ_TABLE help This adds support for frequency switching on Apple iMac G5, diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index addc793..3545af9 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc5 -# Mon May 29 14:47:49 2006 +# Linux kernel version: 2.6.17 +# Mon Jul 3 14:20:49 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -29,6 +31,7 @@ CONFIG_CLASSIC32=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set @@ -39,6 +42,7 @@ CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -72,10 +76,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -119,6 +125,9 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_APUS is not set # CONFIG_PPC_CHRP is not set CONFIG_PPC_PMAC=y +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set @@ -154,6 +163,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -164,6 +174,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_PM=y @@ -182,6 +193,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -256,6 +268,8 @@ CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -268,6 +282,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -292,9 +307,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -313,6 +330,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_H323=m +# CONFIG_IP_NF_SIP is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -457,6 +475,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -500,6 +519,7 @@ CONFIG_WIRELESS_EXT=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -600,7 +620,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_BLINK=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -661,6 +680,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -705,9 +725,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m @@ -750,7 +768,6 @@ CONFIG_IEEE1394_OHCI1394=m # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m @@ -766,9 +783,12 @@ CONFIG_IEEE1394_RAWIO=m CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y +CONFIG_ADB_PMU_LED=y +CONFIG_ADB_PMU_LED_IDE=y CONFIG_PMAC_APM_EMU=m CONFIG_PMAC_MEDIABAY=y CONFIG_PMAC_BACKLIGHT=y +CONFIG_PMAC_BACKLIGHT_LEGACY=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_THERM_WINDTUNNEL=m @@ -858,6 +878,7 @@ CONFIG_PCNET32=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -908,6 +929,7 @@ CONFIG_APPLE_AIRPORT=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m +# CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y @@ -998,6 +1020,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -1029,6 +1052,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -1040,6 +1064,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m CONFIG_DRM=m @@ -1092,6 +1117,7 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_POWERMAC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -1156,12 +1182,13 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -1178,6 +1205,7 @@ CONFIG_FB_IMSTT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y +CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -1187,12 +1215,15 @@ CONFIG_FB_MATROX_MYSTIQUE=y # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=y +CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y +CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -1221,7 +1252,11 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y # # Sound @@ -1278,6 +1313,18 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1315,6 +1362,17 @@ CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y # +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + +# # USB devices # CONFIG_SND_USB_AUDIO=m @@ -1355,6 +1413,7 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1431,7 +1490,6 @@ CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # @@ -1499,10 +1557,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1524,7 +1584,8 @@ CONFIG_USB_EZUSB=y # # LED devices # -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # # LED drivers @@ -1533,6 +1594,10 @@ CONFIG_USB_EZUSB=y # # LED Triggers # +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # # InfiniBand support @@ -1549,6 +1614,19 @@ CONFIG_USB_EZUSB=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1569,6 +1647,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1649,6 +1728,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1732,6 +1812,7 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1744,12 +1825,15 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1763,11 +1847,7 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index e16eb2a..6ff3cf5 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -191,6 +191,37 @@ exception_marker: ori reg,reg,(label)@l; /* virt addr of handler ... */ #endif +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9; \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + #define EXCEPTION_PROLOG_PSERIES(area, label) \ mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ std r9,area+EX_R9(r13); /* save r9 - r12 */ \ @@ -604,14 +635,14 @@ slb_miss_user_pseries: system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi .align 7 machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES /*** ISeries-LPAR interrupt handlers ***/ diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 7e98e77..359ab89 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -112,7 +112,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, static int __init add_legacy_soc_port(struct device_node *np, struct device_node *soc_dev) { - phys_addr_t addr; + u64 addr; u32 *addrp; upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; @@ -143,7 +143,7 @@ static int __init add_legacy_isa_port(struct device_node *np, u32 *reg; char *typep; int index = -1; - phys_addr_t taddr; + u64 taddr; DBG(" -> add_legacy_isa_port(%s)\n", np->full_name); @@ -165,10 +165,13 @@ static int __init add_legacy_isa_port(struct device_node *np, if (typep && *typep == 'S') index = simple_strtol(typep+1, NULL, 0) - 1; - /* Translate ISA address */ + /* Translate ISA address. If it fails, we still register the port + * with no translated address so that it can be picked up as an IO + * port later by the serial driver + */ taddr = of_translate_address(np, reg); if (taddr == OF_BAD_ADDR) - return -1; + taddr = 0; /* Add port, irq will be dealt with later */ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, @@ -180,7 +183,7 @@ static int __init add_legacy_isa_port(struct device_node *np, static int __init add_legacy_pci_port(struct device_node *np, struct device_node *pci_dev) { - phys_addr_t addr, base; + u64 addr, base; u32 *addrp; unsigned int flags; int iotype, index = -1, lindex = 0; diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index bfb407f..e3ed21c 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -687,7 +687,7 @@ _GLOBAL(kexec_sequence) /* clear out hardware hash page table and tlb */ ld r5,0(r27) /* deref function descriptor */ mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ + bctrl /* ppc_md.hpte_clear_all(void); */ /* * kexec image calling is: diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ebd501a..462bced 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -557,7 +557,9 @@ unsigned long prom_memparse(const char *ptr, const char **retptr) static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); +#ifdef CONFIG_PPC64 const char *opt; +#endif char *p; int l = 0; @@ -2030,6 +2032,39 @@ static void __init fixup_device_tree_maple(void) #define fixup_device_tree_maple() #endif +#ifdef CONFIG_PPC_CHRP +/* Pegasos lacks the "ranges" property in the isa node */ +static void __init fixup_device_tree_chrp(void) +{ + phandle isa; + u32 isa_ranges[6]; + char *name; + int rc; + + name = "/pci@80000000/isa@c"; + isa = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(isa)) + return; + + rc = prom_getproplen(isa, "ranges"); + if (rc != 0 && rc != PROM_ERROR) + return; + + prom_printf("Fixing up missing ISA range on Pegasos...\n"); + + isa_ranges[0] = 0x1; + isa_ranges[1] = 0x0; + isa_ranges[2] = 0x01006000; + isa_ranges[3] = 0x0; + isa_ranges[4] = 0x0; + isa_ranges[5] = 0x00010000; + prom_setprop(isa, name, "ranges", + isa_ranges, sizeof(isa_ranges)); +} +#else +#define fixup_device_tree_chrp() +#endif + #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC) static void __init fixup_device_tree_pmac(void) { @@ -2077,6 +2112,7 @@ static void __init fixup_device_tree_pmac(void) static void __init fixup_device_tree(void) { fixup_device_tree_maple(); + fixup_device_tree_chrp(); fixup_device_tree_pmac(); } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 46c56cf..6a9bc9c 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -144,13 +144,15 @@ void smp_message_recv(int msg, struct pt_regs *regs) void smp_send_reschedule(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); } #ifdef CONFIG_DEBUGGER void smp_send_debugger_break(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); } #endif @@ -158,7 +160,7 @@ void smp_send_debugger_break(int cpu) void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) { crash_ipi_function_ptr = crash_ipi_callback; - if (crash_ipi_callback) { + if (crash_ipi_callback && smp_ops) { mb(); smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK); } @@ -220,6 +222,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); + if (unlikely(smp_ops == NULL)) + return -1; + data.func = func; data.info = info; atomic_set(&data.started, 0); @@ -357,7 +362,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpuid); cpu_callin_map[boot_cpuid] = 1; - max_cpus = smp_ops->probe(); + if (smp_ops) + max_cpus = smp_ops->probe(); + else + max_cpus = 1; smp_space_timers(max_cpus); @@ -453,7 +461,7 @@ void generic_mach_cpu_die(void) static int __devinit cpu_enable(unsigned int cpu) { - if (smp_ops->cpu_enable) + if (smp_ops && smp_ops->cpu_enable) return smp_ops->cpu_enable(cpu); return -ENOSYS; @@ -467,7 +475,8 @@ int __devinit __cpu_up(unsigned int cpu) if (!cpu_enable(cpu)) return 0; - if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) + if (smp_ops == NULL || + (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))) return -EINVAL; /* Make sure callin-map entry is 0 (can be leftover a CPU @@ -568,7 +577,8 @@ void __init smp_cpus_done(unsigned int max_cpus) old_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); - smp_ops->setup_cpu(boot_cpuid); + if (smp_ops) + smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 0835b48..2d17f2b 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -81,10 +81,14 @@ static int udbg_550_getc(void) void udbg_init_uart(void __iomem *comport, unsigned int speed, unsigned int clock) { - unsigned int dll, base_bauds = clock / 16; + unsigned int dll, base_bauds; + if (clock == 0) + clock = 1843200; if (speed == 0) speed = 9600; + + base_bauds = clock / 16; dll = base_bauds / speed; if (comport) { diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 4b17a73..716a290 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -320,7 +320,8 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit) break; } - lmb.rmo_size = lmb.memory.region[0].size; + if (lmb.memory.region[0].size < lmb.rmo_size) + lmb.rmo_size = lmb.memory.region[0].size; /* And truncate any reserves above the limit also. */ for (i = 0; i < lmb.reserved.cnt; i++) { diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 538e337..9c08ff3 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -291,10 +291,6 @@ void __init chrp_setup_arch(void) pci_create_OF_bus_map(); -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - /* * Print the banner, then scroll down so boot progress * can be printed. -- Cort @@ -479,6 +475,14 @@ void __init chrp_init_IRQ(void) chrp_find_openpic(); chrp_find_8259(); +#ifdef CONFIG_SMP + /* Pegasos has no MPIC, those ops would make it crash. It might be an + * option to move setting them to after we probe the PIC though + */ + if (chrp_mpic != NULL) + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ + if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index cb528c9..57567df 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -221,10 +221,17 @@ static void __init maple_init_IRQ(void) * in Maple device-tree where the type of the controller is * open-pic and not interrupt-controller */ - for_each_node_by_type(np, "open-pic") { - mpic_node = np; - break; - } + + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "open-pic")) { + mpic_node = np; + break; + } + if (mpic_node == NULL) + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } if (mpic_node == NULL) { printk(KERN_ERR "Failed to locate the MPIC interrupt controller\n"); @@ -252,6 +259,8 @@ static void __init maple_init_IRQ(void) /* XXX Maple specific bits */ flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET; + /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ + flags |= MPIC_BIG_ENDIAN; /* Setup the openpic driver. More device-tree junks, we hard code no * ISUs for now. I'll have to revisit some stuffs with the folks doing diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 871b002c9..6a026c7 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -181,13 +181,18 @@ static void __init bootx_add_chosen_props(unsigned long base, } static void __init bootx_add_display_props(unsigned long base, - unsigned long *mem_end) + unsigned long *mem_end, + int has_real_node) { boot_infos_t *bi = bootx_info; u32 tmp; - bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); - bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); + if (has_real_node) { + bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); + bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); + } else + bootx_dt_add_prop("linux,bootx-noscreen", NULL, 0, mem_end); + tmp = bi->dispDeviceDepth; bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end); tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0]; @@ -241,11 +246,6 @@ static void __init bootx_scan_dt_build_strings(unsigned long base, DBG(" detected display ! adding properties names !\n"); bootx_dt_add_string("linux,boot-display", mem_end); bootx_dt_add_string("linux,opened", mem_end); - bootx_dt_add_string("linux,bootx-depth", mem_end); - bootx_dt_add_string("linux,bootx-width", mem_end); - bootx_dt_add_string("linux,bootx-height", mem_end); - bootx_dt_add_string("linux,bootx-linebytes", mem_end); - bootx_dt_add_string("linux,bootx-addr", mem_end); strncpy(bootx_disp_path, namep, 255); } @@ -329,10 +329,13 @@ static void __init bootx_scan_dt_build_struct(unsigned long base, ppp = &pp->next; } - if (node == bootx_node_chosen) + if (node == bootx_node_chosen) { bootx_add_chosen_props(base, mem_end); - if (node == bootx_info->dispDeviceRegEntryOffset) - bootx_add_display_props(base, mem_end); + if (bootx_info->dispDeviceRegEntryOffset == 0) + bootx_add_display_props(base, mem_end, 0); + } + else if (node == bootx_info->dispDeviceRegEntryOffset) + bootx_add_display_props(base, mem_end, 1); /* do all our children */ cpp = &np->child; @@ -374,6 +377,14 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) mem_end += 4; bootx_dt_strend = mem_end; bootx_scan_dt_build_strings(base, 4, &mem_end); + /* Add some strings */ + bootx_dt_add_string("linux,bootx-noscreen", &mem_end); + bootx_dt_add_string("linux,bootx-depth", &mem_end); + bootx_dt_add_string("linux,bootx-width", &mem_end); + bootx_dt_add_string("linux,bootx-height", &mem_end); + bootx_dt_add_string("linux,bootx-linebytes", &mem_end); + bootx_dt_add_string("linux,bootx-addr", &mem_end); + /* Wrap up strings */ hdr->off_dt_strings = bootx_dt_strbase - mem_start; hdr->dt_strings_size = bootx_dt_strend - bootx_dt_strbase; @@ -471,6 +482,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) if (bi->dispDeviceDepth == 16) bi->dispDeviceDepth = 15; + #ifdef CONFIG_BOOTX_TEXT ptr = (unsigned long)bi->logicalDisplayBase; ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes; @@ -508,6 +520,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) #ifdef CONFIG_BOOTX_TEXT btext_welcome(bi); #endif + /* New BootX enters kernel with MMU off, i/os are not allowed * here. This hack will have been done by the boostrap anyway. */ diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index f08a145..7b1156e 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -10,6 +10,8 @@ * that is iMac G5 and latest single CPU desktop. */ +#undef DEBUG + #include <linux/module.h> #include <linux/types.h> #include <linux/errno.h> @@ -30,13 +32,7 @@ #include <asm/smu.h> #include <asm/pmac_pfunc.h> -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG(fmt...) -#endif +#define DBG(fmt...) pr_debug(fmt) /* see 970FX user manual */ @@ -82,8 +78,6 @@ static struct freq_attr* g5_cpu_freqs_attr[] = { /* Power mode data is an array of the 32 bits PCR values to use for * the various frequencies, retrieved from the device-tree */ -static u32 *g5_pmode_data; -static int g5_pmode_max; static int g5_pmode_cur; static void (*g5_switch_volt)(int speed_mode); @@ -93,6 +87,11 @@ static int (*g5_query_freq)(void); static DEFINE_MUTEX(g5_switch_mutex); +#ifdef CONFIG_PMAC_SMU + +static u32 *g5_pmode_data; +static int g5_pmode_max; + static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ static int g5_fvt_count; /* number of op. points */ static int g5_fvt_cur; /* current op. point */ @@ -210,6 +209,16 @@ static int g5_scom_query_freq(void) } /* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* * Platform function based voltage switching for PowerMac7,2 & 7,3 */ @@ -248,6 +257,9 @@ static int g5_pfunc_switch_freq(int speed_mode) struct pmf_args args; u32 done = 0; unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); /* If frequency is going up, first ramp up the voltage */ if (speed_mode < g5_pmode_cur) @@ -255,9 +267,12 @@ static int g5_pfunc_switch_freq(int speed_mode) /* Do it */ if (speed_mode == CPUFREQ_HIGH) - pmf_call_one(pfunc_cpu_setfreq_high, NULL); + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); else - pmf_call_one(pfunc_cpu_setfreq_low, NULL); + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); /* It's an irq GPIO so we should be able to just block here, * I'll do that later after I've properly tested the IRQ code for @@ -296,13 +311,6 @@ static int g5_pfunc_query_freq(void) return val ? CPUFREQ_HIGH : CPUFREQ_LOW; } -/* - * Fake voltage switching for platforms with missing support - */ - -static void g5_dummy_switch_volt(int speed_mode) -{ -} /* * Common interface to the cpufreq core @@ -375,6 +383,8 @@ static struct cpufreq_driver g5_cpufreq_driver = { }; +#ifdef CONFIG_PMAC_SMU + static int __init g5_neo2_cpufreq_init(struct device_node *cpus) { struct device_node *cpunode; @@ -525,6 +535,9 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) return rc; } +#endif /* CONFIG_PMAC_SMU */ + + static int __init g5_pm72_cpufreq_init(struct device_node *cpus) { struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; @@ -533,6 +546,9 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) u64 max_freq, min_freq, ih, il; int has_volt = 1, rc = 0; + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + /* Get first CPU node */ for (cpunode = NULL; (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { @@ -636,6 +652,15 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) */ ih = *((u32 *)(eeprom + 0x10)); il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + printk(KERN_WARNING "cpufreq: No low frequency mode available" + " on this model !\n"); + rc = -ENODEV; + goto bail; + } + min_freq = 0; if (ih != 0 && il != 0) min_freq = (max_freq * il) / ih; @@ -643,7 +668,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) /* Sanity check */ if (min_freq >= max_freq || min_freq < 1000) { printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); - rc = -ENODEV; + rc = -ENXIO; goto bail; } g5_cpu_freqs[0].frequency = max_freq; @@ -690,16 +715,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) return rc; } -static int __init g5_rm31_cpufreq_init(struct device_node *cpus) -{ - /* NYI */ - return 0; -} - static int __init g5_cpufreq_init(void) { struct device_node *cpus; - int rc; + int rc = 0; cpus = of_find_node_by_path("/cpus"); if (cpus == NULL) { @@ -708,12 +727,13 @@ static int __init g5_cpufreq_init(void) } if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3")) + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) rc = g5_pm72_cpufreq_init(cpus); - else if (machine_is_compatible("RackMac3,1")) - rc = g5_rm31_cpufreq_init(cpus); +#ifdef CONFIG_PMAC_SMU else rc = g5_neo2_cpufreq_init(cpus); +#endif /* CONFIG_PMAC_SMU */ of_node_put(cpus); return rc; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 54a5243..71c634e 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -501,7 +501,8 @@ static void pseries_dedicated_idle_sleep(void) } /* - * Cede if the other thread is not idle, so that it can + * If not SMT, cede processor. If CPU is running SMT + * cede if the other thread is not idle, so that it can * go single-threaded. If the other thread is idle, * we ask the hypervisor if it has pending work it * wants to do and cede if it does. Otherwise we keep @@ -514,7 +515,8 @@ static void pseries_dedicated_idle_sleep(void) * very low priority. The cede enables interrupts, which * doesn't matter here. */ - if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING) + if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle + || poll_pending() == H_PENDING) cede_processor(); out: diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 556958e..b6fb167 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -774,20 +774,6 @@ config BLK_DEV_IDEDMA_PMAC to transfer data to and from memory. Saying Y is safe and improves performance. -config BLK_DEV_IDE_PMAC_BLINK - bool "Blink laptop LED on drive activity (DEPRECATED)" - depends on BLK_DEV_IDE_PMAC && ADB_PMU - select ADB_PMU_LED - select LEDS_TRIGGERS - select LEDS_TRIGGER_IDE_DISK - help - This option enables the use of the sleep LED as a hard drive - activity LED. - This option is deprecated, it only selects ADB_PMU_LED and - LEDS_TRIGGER_IDE_DISK and changes the code in the new led class - device to default to the ide-disk trigger (which should be set - from userspace via sysfs). - config BLK_DEV_IDE_SWARM tristate "IDE for Sibyte evaluation boards" depends on SIBYTE_SB1xxx_SOC diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index d162307..d5d649f 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -90,6 +90,15 @@ config ADB_PMU_LED and the ide-disk LED trigger and configure appropriately through sysfs. +config ADB_PMU_LED_IDE + bool "Use front LED as IDE LED by default" + depends on ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK + help + This option makes the front LED default to the IDE trigger + so that it blinks on IDE activity. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 @@ -100,7 +109,7 @@ config PMAC_SMU config PMAC_APM_EMU tristate "APM emulation" - depends on PPC_PMAC && PPC32 && PM + depends on PPC_PMAC && PPC32 && PM && ADB_PMU config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index c1fe0b3..20bf672 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -95,6 +95,17 @@ * - Use min/max macros here or there * - Latest darwin updated U3H min fan speed to 20% PWM * + * July. 06, 2006 : 1.3 + * - Fix setting of RPM fans on Xserve G5 (they were going too fast) + * - Add missing slots fan control loop for Xserve G5 + * - Lower fixed slots fan speed from 50% to 40% on desktop G5s. We + * still can't properly implement the control loop for these, so let's + * reduce the noise a little bit, it appears that 40% still gives us + * a pretty good air flow + * - Add code to "tickle" the FCU regulary so it doesn't think that + * we are gone while in fact, the machine just didn't need any fan + * speed change lately + * */ #include <linux/types.h> @@ -121,7 +132,7 @@ #include "therm_pm72.h" -#define VERSION "1.2b2" +#define VERSION "1.3" #undef DEBUG @@ -146,6 +157,7 @@ static struct basckside_pid_params backside_params; static struct backside_pid_state backside_state; static struct drives_pid_state drives_state; static struct dimm_pid_state dimms_state; +static struct slots_pid_state slots_state; static int state; static int cpu_count; static int cpu_pid_type; @@ -154,7 +166,8 @@ static struct completion ctrl_complete; static int critical_state; static int rackmac; static s32 dimm_output_clamp; - +static int fcu_rpm_shift; +static int fcu_tickle_ticks; static DECLARE_MUTEX(driver_lock); /* @@ -495,13 +508,20 @@ static int start_fcu(void) rc = fan_write_reg(0x2e, &buf, 1); if (rc < 0) return -EIO; + rc = fan_read_reg(0, &buf, 1); + if (rc < 0) + return -EIO; + fcu_rpm_shift = (buf == 1) ? 2 : 3; + printk(KERN_DEBUG "FCU Initialized, RPM fan shift is %d\n", + fcu_rpm_shift); + return 0; } static int set_rpm_fan(int fan_index, int rpm) { unsigned char buf[2]; - int rc, id; + int rc, id, min, max; if (fcu_fans[fan_index].type != FCU_FAN_RPM) return -EINVAL; @@ -509,12 +529,15 @@ static int set_rpm_fan(int fan_index, int rpm) if (id == FCU_FAN_ABSENT_ID) return -EINVAL; - if (rpm < 300) - rpm = 300; - else if (rpm > 8191) - rpm = 8191; - buf[0] = rpm >> 5; - buf[1] = rpm << 3; + min = 2400 >> fcu_rpm_shift; + max = 56000 >> fcu_rpm_shift; + + if (rpm < min) + rpm = min; + else if (rpm > max) + rpm = max; + buf[0] = rpm >> (8 - fcu_rpm_shift); + buf[1] = rpm << fcu_rpm_shift; rc = fan_write_reg(0x10 + (id * 2), buf, 2); if (rc < 0) return -EIO; @@ -551,7 +574,7 @@ static int get_rpm_fan(int fan_index, int programmed) if (rc != 2) return -EIO; - return (buf[0] << 5) | buf[1] >> 3; + return (buf[0] << (8 - fcu_rpm_shift)) | buf[1] >> fcu_rpm_shift; } static int set_pwm_fan(int fan_index, int pwm) @@ -609,6 +632,26 @@ static int get_pwm_fan(int fan_index) return (buf[0] * 1000) / 2559; } +static void tickle_fcu(void) +{ + int pwm; + + pwm = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + + DBG("FCU Tickle, slots fan is: %d\n", pwm); + if (pwm < 0) + pwm = 100; + + if (!rackmac) { + pwm = SLOTS_FAN_DEFAULT_PWM; + } else if (pwm < SLOTS_PID_OUTPUT_MIN) + pwm = SLOTS_PID_OUTPUT_MIN; + + /* That is hopefully enough to make the FCU happy */ + set_pwm_fan(SLOTS_FAN_PWM_INDEX, pwm); +} + + /* * Utility routine to read the CPU calibration EEPROM data * from the device-tree @@ -715,6 +758,9 @@ BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm) BUILD_SHOW_FUNC_FIX(drives_temperature, drives_state.last_temp) BUILD_SHOW_FUNC_INT(drives_fan_rpm, drives_state.rpm) +BUILD_SHOW_FUNC_FIX(slots_temperature, slots_state.last_temp) +BUILD_SHOW_FUNC_INT(slots_fan_pwm, slots_state.pwm) + BUILD_SHOW_FUNC_FIX(dimms_temperature, dimms_state.last_temp) static DEVICE_ATTR(cpu0_temperature,S_IRUGO,show_cpu0_temperature,NULL); @@ -735,6 +781,9 @@ static DEVICE_ATTR(backside_fan_pwm,S_IRUGO,show_backside_fan_pwm,NULL); static DEVICE_ATTR(drives_temperature,S_IRUGO,show_drives_temperature,NULL); static DEVICE_ATTR(drives_fan_rpm,S_IRUGO,show_drives_fan_rpm,NULL); +static DEVICE_ATTR(slots_temperature,S_IRUGO,show_slots_temperature,NULL); +static DEVICE_ATTR(slots_fan_pwm,S_IRUGO,show_slots_fan_pwm,NULL); + static DEVICE_ATTR(dimms_temperature,S_IRUGO,show_dimms_temperature,NULL); /* @@ -1076,6 +1125,9 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state) fan_min = dimm_output_clamp; fan_min = max(fan_min, (int)state->mpu.rminn_intake_fan); + DBG(" CPU min mpu = %d, min dimm = %d\n", + state->mpu.rminn_intake_fan, dimm_output_clamp); + state->rpm = max(state->rpm, (int)fan_min); state->rpm = min(state->rpm, (int)state->mpu.rmaxn_intake_fan); state->intake_rpm = state->rpm; @@ -1374,7 +1426,8 @@ static void do_monitor_drives(struct drives_pid_state *state) DBG(" current rpm: %d\n", state->rpm); /* Get some sensor readings */ - temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, DS1775_TEMP)) << 8; + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; state->last_temp = temp; DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), FIX32TOPRINT(DRIVES_PID_INPUT_TARGET)); @@ -1575,7 +1628,7 @@ static int init_dimms_state(struct dimm_pid_state *state) } /* - * Dispose of the state data for the drives control loop + * Dispose of the state data for the DIMM control loop */ static void dispose_dimms_state(struct dimm_pid_state *state) { @@ -1588,6 +1641,127 @@ static void dispose_dimms_state(struct dimm_pid_state *state) state->monitor = NULL; } +/* + * Slots fan control loop + */ +static void do_monitor_slots(struct slots_pid_state *state) +{ + s32 temp, integral, derivative; + s64 integ_p, deriv_p, prop_p, sum; + int i, rc; + + if (--state->ticks != 0) + return; + state->ticks = SLOTS_PID_INTERVAL; + + DBG("slots:\n"); + + /* Check fan status */ + rc = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + if (rc < 0) { + printk(KERN_WARNING "Error %d reading slots fan !\n", rc); + /* XXX What do we do now ? */ + } else + state->pwm = rc; + DBG(" current pwm: %d\n", state->pwm); + + /* Get some sensor readings */ + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; + state->last_temp = temp; + DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), + FIX32TOPRINT(SLOTS_PID_INPUT_TARGET)); + + /* Store temperature and error in history array */ + state->cur_sample = (state->cur_sample + 1) % SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = temp - SLOTS_PID_INPUT_TARGET; + + /* If first loop, fill the history table */ + if (state->first) { + for (i = 0; i < (SLOTS_PID_HISTORY_SIZE - 1); i++) { + state->cur_sample = (state->cur_sample + 1) % + SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = + temp - SLOTS_PID_INPUT_TARGET; + } + state->first = 0; + } + + /* Calculate the integral term */ + sum = 0; + integral = 0; + for (i = 0; i < SLOTS_PID_HISTORY_SIZE; i++) + integral += state->error_history[i]; + integral *= SLOTS_PID_INTERVAL; + DBG(" integral: %08x\n", integral); + integ_p = ((s64)SLOTS_PID_G_r) * (s64)integral; + DBG(" integ_p: %d\n", (int)(integ_p >> 36)); + sum += integ_p; + + /* Calculate the derivative term */ + derivative = state->error_history[state->cur_sample] - + state->error_history[(state->cur_sample + SLOTS_PID_HISTORY_SIZE - 1) + % SLOTS_PID_HISTORY_SIZE]; + derivative /= SLOTS_PID_INTERVAL; + deriv_p = ((s64)SLOTS_PID_G_d) * (s64)derivative; + DBG(" deriv_p: %d\n", (int)(deriv_p >> 36)); + sum += deriv_p; + + /* Calculate the proportional term */ + prop_p = ((s64)SLOTS_PID_G_p) * (s64)(state->error_history[state->cur_sample]); + DBG(" prop_p: %d\n", (int)(prop_p >> 36)); + sum += prop_p; + + /* Scale sum */ + sum >>= 36; + + DBG(" sum: %d\n", (int)sum); + state->pwm = (s32)sum; + + state->pwm = max(state->pwm, SLOTS_PID_OUTPUT_MIN); + state->pwm = min(state->pwm, SLOTS_PID_OUTPUT_MAX); + + DBG("** DRIVES PWM: %d\n", (int)state->pwm); + set_pwm_fan(SLOTS_FAN_PWM_INDEX, state->pwm); +} + +/* + * Initialize the state structure for the slots bay fan control loop + */ +static int init_slots_state(struct slots_pid_state *state) +{ + state->ticks = 1; + state->first = 1; + state->pwm = 50; + + state->monitor = attach_i2c_chip(XSERVE_SLOTS_LM75, "slots_temp"); + if (state->monitor == NULL) + return -ENODEV; + + device_create_file(&of_dev->dev, &dev_attr_slots_temperature); + device_create_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + return 0; +} + +/* + * Dispose of the state data for the slots control loop + */ +static void dispose_slots_state(struct slots_pid_state *state) +{ + if (state->monitor == NULL) + return; + + device_remove_file(&of_dev->dev, &dev_attr_slots_temperature); + device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + detach_i2c_chip(state->monitor); + state->monitor = NULL; +} + + static int call_critical_overtemp(void) { char *argv[] = { critical_overtemp_path, NULL }; @@ -1617,14 +1791,17 @@ static int main_control_loop(void *x) goto out; } - /* Set the PCI fan once for now */ - set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); + /* Set the PCI fan once for now on non-RackMac */ + if (!rackmac) + set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); /* Initialize ADCs */ initialize_adc(&cpu_state[0]); if (cpu_state[1].monitor != NULL) initialize_adc(&cpu_state[1]); + fcu_tickle_ticks = FCU_TICKLE_TICKS; + up(&driver_lock); while (state == state_attached) { @@ -1634,6 +1811,12 @@ static int main_control_loop(void *x) down(&driver_lock); + /* Tickle the FCU just in case */ + if (--fcu_tickle_ticks < 0) { + fcu_tickle_ticks = FCU_TICKLE_TICKS; + tickle_fcu(); + } + /* First, we always calculate the new DIMMs state on an Xserve */ if (rackmac) do_monitor_dimms(&dimms_state); @@ -1654,7 +1837,9 @@ static int main_control_loop(void *x) } /* Then, the rest */ do_monitor_backside(&backside_state); - if (!rackmac) + if (rackmac) + do_monitor_slots(&slots_state); + else do_monitor_drives(&drives_state); up(&driver_lock); @@ -1696,6 +1881,7 @@ static void dispose_control_loops(void) dispose_cpu_state(&cpu_state[1]); dispose_backside_state(&backside_state); dispose_drives_state(&drives_state); + dispose_slots_state(&slots_state); dispose_dimms_state(&dimms_state); } @@ -1745,6 +1931,8 @@ static int create_control_loops(void) goto fail; if (rackmac && init_dimms_state(&dimms_state)) goto fail; + if (rackmac && init_slots_state(&slots_state)) + goto fail; if (!rackmac && init_drives_state(&drives_state)) goto fail; diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h index fc7e9b7..393cc9d 100644 --- a/drivers/macintosh/therm_pm72.h +++ b/drivers/macintosh/therm_pm72.h @@ -105,6 +105,7 @@ static char * critical_overtemp_path = "/sbin/critical_overtemp"; #define DRIVES_DALLAS_ID 0x94 #define BACKSIDE_MAX_ID 0x98 #define XSERVE_DIMMS_LM87 0x25a +#define XSERVE_SLOTS_LM75 0x290 /* * Some MAX6690, DS1775, LM87 register definitions @@ -198,7 +199,7 @@ struct drives_pid_state #define SLOTS_FAN_PWM_DEFAULT_ID 2 #define SLOTS_FAN_PWM_INDEX 2 -#define SLOTS_FAN_DEFAULT_PWM 50 /* Do better here ! */ +#define SLOTS_FAN_DEFAULT_PWM 40 /* Do better here ! */ /* @@ -206,7 +207,7 @@ struct drives_pid_state */ #define DIMM_PID_G_d 0 #define DIMM_PID_G_p 0 -#define DIMM_PID_G_r 0x6553600 +#define DIMM_PID_G_r 0x06553600 #define DIMM_PID_INPUT_TARGET 3276800 #define DIMM_PID_INTERVAL 1 #define DIMM_PID_OUTPUT_MAX 14000 @@ -226,6 +227,31 @@ struct dimm_pid_state }; +/* + * PID factors for the Xserve Slots control loop + */ +#define SLOTS_PID_G_d 0 +#define SLOTS_PID_G_p 0 +#define SLOTS_PID_G_r 0x00100000 +#define SLOTS_PID_INPUT_TARGET 3200000 +#define SLOTS_PID_INTERVAL 1 +#define SLOTS_PID_OUTPUT_MAX 100 +#define SLOTS_PID_OUTPUT_MIN 20 +#define SLOTS_PID_HISTORY_SIZE 20 + +struct slots_pid_state +{ + int ticks; + struct i2c_client * monitor; + s32 sample_history[SLOTS_PID_HISTORY_SIZE]; + s32 error_history[SLOTS_PID_HISTORY_SIZE]; + int cur_sample; + s32 last_temp; + int first; + int pwm; +}; + + /* Desktops */ @@ -283,6 +309,9 @@ struct cpu_pid_state s32 pump_max; }; +/* Tickle FCU every 10 seconds */ +#define FCU_TICKLE_TICKS 10 + /* * Driver state */ diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index af8375e..5189d54 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -74,7 +74,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, static struct led_classdev pmu_led = { .name = "pmu-front-led", -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK +#ifdef CONFIG_ADB_PMU_LED_IDE .default_trigger = "ide-disk", #endif .brightness_set = pmu_led_set, diff --git a/drivers/video/offb.c b/drivers/video/offb.c index ce5f303..0013311 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -62,8 +62,6 @@ struct offb_par default_par; * Interface used by the world */ -int offb_init(void); - static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info); static int offb_blank(int blank, struct fb_info *info); @@ -72,11 +70,6 @@ static int offb_blank(int blank, struct fb_info *info); extern boot_infos_t *boot_infos; #endif -static void offb_init_nodriver(struct device_node *); -static void offb_init_fb(const char *name, const char *full_name, - int width, int height, int depth, int pitch, - unsigned long address, struct device_node *dp); - static struct fb_ops offb_ops = { .owner = THIS_MODULE, .fb_setcolreg = offb_setcolreg, @@ -229,123 +222,17 @@ static int offb_blank(int blank, struct fb_info *info) return 0; } - /* - * Initialisation - */ -int __init offb_init(void) +static void __iomem *offb_map_reg(struct device_node *np, int index, + unsigned long offset, unsigned long size) { - struct device_node *dp = NULL, *boot_disp = NULL; - - if (fb_get_options("offb", NULL)) - return -ENODEV; + struct resource r; - for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { - if (get_property(dp, "linux,opened", NULL) && - get_property(dp, "linux,boot-display", NULL)) { - boot_disp = dp; - offb_init_nodriver(dp); - } - } - for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { - if (get_property(dp, "linux,opened", NULL) && - dp != boot_disp) - offb_init_nodriver(dp); - } - - return 0; -} - - -static void __init offb_init_nodriver(struct device_node *dp) -{ - unsigned int len; - int i, width = 640, height = 480, depth = 8, pitch = 640; - unsigned int flags, rsize, addr_prop = 0; - unsigned long max_size = 0; - u64 rstart, address = OF_BAD_ADDR; - u32 *pp, *addrp, *up; - u64 asize; - - pp = (u32 *)get_property(dp, "linux,bootx-depth", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "depth", &len); - if (pp && len == sizeof(u32)) - depth = *pp; - - pp = (u32 *)get_property(dp, "linux,bootx-width", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "width", &len); - if (pp && len == sizeof(u32)) - width = *pp; - - pp = (u32 *)get_property(dp, "linux,bootx-height", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "height", &len); - if (pp && len == sizeof(u32)) - height = *pp; - - pp = (u32 *)get_property(dp, "linux,bootx-linebytes", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "linebytes", &len); - if (pp && len == sizeof(u32)) - pitch = *pp; - else - pitch = width * ((depth + 7) / 8); - - rsize = (unsigned long)pitch * (unsigned long)height; - - /* Ok, now we try to figure out the address of the framebuffer. - * - * Unfortunately, Open Firmware doesn't provide a standard way to do - * so. All we can do is a dodgy heuristic that happens to work in - * practice. On most machines, the "address" property contains what - * we need, though not on Matrox cards found in IBM machines. What I've - * found that appears to give good results is to go through the PCI - * ranges and pick one that is both big enough and if possible encloses - * the "address" property. If none match, we pick the biggest - */ - up = (u32 *)get_property(dp, "linux,bootx-addr", &len); - if (up == NULL) - up = (u32 *)get_property(dp, "address", &len); - if (up && len == sizeof(u32)) - addr_prop = *up; - - for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags)) - != NULL; i++) { - int match_addrp = 0; - - if (!(flags & IORESOURCE_MEM)) - continue; - if (asize < rsize) - continue; - rstart = of_translate_address(dp, addrp); - if (rstart == OF_BAD_ADDR) - continue; - if (addr_prop && (rstart <= addr_prop) && - ((rstart + asize) >= (addr_prop + rsize))) - match_addrp = 1; - if (match_addrp) { - address = addr_prop; - break; - } - if (rsize > max_size) { - max_size = rsize; - address = OF_BAD_ADDR; - } - - if (address == OF_BAD_ADDR) - address = rstart; - } - if (address == OF_BAD_ADDR && addr_prop) - address = (u64)addr_prop; - if (address != OF_BAD_ADDR) { - /* kludge for valkyrie */ - if (strcmp(dp->name, "valkyrie") == 0) - address += 0x1000; - offb_init_fb(dp->name, dp->full_name, width, height, depth, - pitch, address, dp); - } + if (of_address_to_resource(np, index, &r)) + return 0; + if ((r.start + offset + size) > r.end) + return 0; + return ioremap(r.start + offset, size); } static void __init offb_init_fb(const char *name, const char *full_name, @@ -402,45 +289,39 @@ static void __init offb_init_fb(const char *name, const char *full_name, par->cmap_type = cmap_unknown; if (depth == 8) { - /* Palette hacks disabled for now */ -#if 0 if (dp && !strncmp(name, "ATY,Rage128", 11)) { - unsigned long regbase = dp->addrs[2].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_r128; + par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_r128; } else if (dp && (!strncmp(name, "ATY,RageM3pA", 12) || !strncmp(name, "ATY,RageM3p12A", 14))) { - unsigned long regbase = - dp->parent->addrs[2].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_M3A; + par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_M3A; } else if (dp && !strncmp(name, "ATY,RageM3pB", 12)) { - unsigned long regbase = - dp->parent->addrs[2].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_M3B; + par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_M3B; } else if (dp && !strncmp(name, "ATY,Rage6", 9)) { - unsigned long regbase = dp->addrs[1].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_radeon; + par->cmap_adr = offb_map_reg(dp, 1, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_radeon; } else if (!strncmp(name, "ATY,", 4)) { unsigned long base = address & 0xff000000UL; par->cmap_adr = ioremap(base + 0x7ff000, 0x1000) + 0xcc0; par->cmap_data = par->cmap_adr + 1; par->cmap_type = cmap_m64; - } else if (device_is_compatible(dp, "pci1014,b7")) { - unsigned long regbase = dp->addrs[0].address; - par->cmap_adr = ioremap(regbase + 0x6000, 0x1000); - par->cmap_type = cmap_gxt2000; + } else if (dp && device_is_compatible(dp, "pci1014,b7")) { + par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000); + if (par->cmap_adr) + par->cmap_type = cmap_gxt2000; } -#endif - fix->visual = par->cmap_adr ? FB_VISUAL_PSEUDOCOLOR - : FB_VISUAL_STATIC_PSEUDOCOLOR; + fix->visual = (par->cmap_type != cmap_unknown) ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_STATIC_PSEUDOCOLOR; } else - fix->visual = /* par->cmap_adr ? FB_VISUAL_DIRECTCOLOR - : */ FB_VISUAL_TRUECOLOR; + fix->visual = FB_VISUAL_TRUECOLOR; var->xoffset = var->yoffset = 0; switch (depth) { @@ -520,5 +401,139 @@ static void __init offb_init_fb(const char *name, const char *full_name, info->node, full_name); } + +static void __init offb_init_nodriver(struct device_node *dp, int no_real_node) +{ + unsigned int len; + int i, width = 640, height = 480, depth = 8, pitch = 640; + unsigned int flags, rsize, addr_prop = 0; + unsigned long max_size = 0; + u64 rstart, address = OF_BAD_ADDR; + u32 *pp, *addrp, *up; + u64 asize; + + pp = (u32 *)get_property(dp, "linux,bootx-depth", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "depth", &len); + if (pp && len == sizeof(u32)) + depth = *pp; + + pp = (u32 *)get_property(dp, "linux,bootx-width", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "width", &len); + if (pp && len == sizeof(u32)) + width = *pp; + + pp = (u32 *)get_property(dp, "linux,bootx-height", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "height", &len); + if (pp && len == sizeof(u32)) + height = *pp; + + pp = (u32 *)get_property(dp, "linux,bootx-linebytes", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "linebytes", &len); + if (pp && len == sizeof(u32)) + pitch = *pp; + else + pitch = width * ((depth + 7) / 8); + + rsize = (unsigned long)pitch * (unsigned long)height; + + /* Ok, now we try to figure out the address of the framebuffer. + * + * Unfortunately, Open Firmware doesn't provide a standard way to do + * so. All we can do is a dodgy heuristic that happens to work in + * practice. On most machines, the "address" property contains what + * we need, though not on Matrox cards found in IBM machines. What I've + * found that appears to give good results is to go through the PCI + * ranges and pick one that is both big enough and if possible encloses + * the "address" property. If none match, we pick the biggest + */ + up = (u32 *)get_property(dp, "linux,bootx-addr", &len); + if (up == NULL) + up = (u32 *)get_property(dp, "address", &len); + if (up && len == sizeof(u32)) + addr_prop = *up; + + /* Hack for when BootX is passing us */ + if (no_real_node) + goto skip_addr; + + for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags)) + != NULL; i++) { + int match_addrp = 0; + + if (!(flags & IORESOURCE_MEM)) + continue; + if (asize < rsize) + continue; + rstart = of_translate_address(dp, addrp); + if (rstart == OF_BAD_ADDR) + continue; + if (addr_prop && (rstart <= addr_prop) && + ((rstart + asize) >= (addr_prop + rsize))) + match_addrp = 1; + if (match_addrp) { + address = addr_prop; + break; + } + if (rsize > max_size) { + max_size = rsize; + address = OF_BAD_ADDR; + } + + if (address == OF_BAD_ADDR) + address = rstart; + } + skip_addr: + if (address == OF_BAD_ADDR && addr_prop) + address = (u64)addr_prop; + if (address != OF_BAD_ADDR) { + /* kludge for valkyrie */ + if (strcmp(dp->name, "valkyrie") == 0) + address += 0x1000; + offb_init_fb(no_real_node ? "bootx" : dp->name, + no_real_node ? "display" : dp->full_name, + width, height, depth, pitch, address, + no_real_node ? dp : NULL); + } +} + +static int __init offb_init(void) +{ + struct device_node *dp = NULL, *boot_disp = NULL; + + if (fb_get_options("offb", NULL)) + return -ENODEV; + + /* Check if we have a MacOS display without a node spec */ + if (get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) { + /* The old code tried to work out which node was the MacOS + * display based on the address. I'm dropping that since the + * lack of a node spec only happens with old BootX versions + * (users can update) and with this code, they'll still get + * a display (just not the palette hacks). + */ + offb_init_nodriver(of_chosen, 1); + } + + for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { + if (get_property(dp, "linux,opened", NULL) && + get_property(dp, "linux,boot-display", NULL)) { + boot_disp = dp; + offb_init_nodriver(dp, 0); + } + } + for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { + if (get_property(dp, "linux,opened", NULL) && + dp != boot_disp) + offb_init_nodriver(dp, 0); + } + + return 0; +} + + module_init(offb_init); MODULE_LICENSE("GPL"); |