diff options
author | Per Forlin <per.forlin@linaro.org> | 2011-07-01 16:55:29 (GMT) |
---|---|---|
committer | Chris Ball <cjb@laptop.org> | 2011-07-20 21:21:13 (GMT) |
commit | 54d49d77628bed77e5491b8a2a1158a492843a19 (patch) | |
tree | 6001701b192b9ef07f3826b96b8e67147a48f8b6 | |
parent | 97868a2bdfc2fc79a987b64f1611034b56a3f8c4 (diff) | |
download | linux-54d49d77628bed77e5491b8a2a1158a492843a19.tar.xz |
mmc: block: add a block request prepare function
Break out code from mmc_blk_issue_rw_rq to create a block request prepare
function. This doesn't change any functionallity. This helps when handling
more than one active block request.
Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
-rw-r--r-- | drivers/mmc/card/block.c | 218 |
1 files changed, 114 insertions, 104 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 88bcc4e..a0a76f4 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -812,12 +812,15 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, R1_CC_ERROR | /* Card controller error */ \ R1_ERROR) /* General/unknown error */ -static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) +static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, + struct mmc_card *card, + int disable_multi, + struct mmc_queue *mq) { + u32 readcmd, writecmd; + struct mmc_blk_request *brq = &mqrq->brq; + struct request *req = mqrq->req; struct mmc_blk_data *md = mq->data; - struct mmc_card *card = md->queue.card; - struct mmc_blk_request *brq = &mq->mqrq_cur->brq; - int ret = 1, disable_multi = 0, retry = 0; /* * Reliable writes are used to implement Forced Unit Access and @@ -828,119 +831,126 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) (rq_data_dir(req) == WRITE) && (md->flags & MMC_BLK_REL_WR); - do { - u32 readcmd, writecmd; - - memset(brq, 0, sizeof(struct mmc_blk_request)); - brq->mrq.cmd = &brq->cmd; - brq->mrq.data = &brq->data; - - brq->cmd.arg = blk_rq_pos(req); - if (!mmc_card_blockaddr(card)) - brq->cmd.arg <<= 9; - brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; - brq->data.blksz = 512; - brq->stop.opcode = MMC_STOP_TRANSMISSION; - brq->stop.arg = 0; - brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - brq->data.blocks = blk_rq_sectors(req); - - /* - * The block layer doesn't support all sector count - * restrictions, so we need to be prepared for too big - * requests. - */ - if (brq->data.blocks > card->host->max_blk_count) - brq->data.blocks = card->host->max_blk_count; + memset(brq, 0, sizeof(struct mmc_blk_request)); + brq->mrq.cmd = &brq->cmd; + brq->mrq.data = &brq->data; - /* - * After a read error, we redo the request one sector at a time - * in order to accurately determine which sectors can be read - * successfully. - */ - if (disable_multi && brq->data.blocks > 1) - brq->data.blocks = 1; + brq->cmd.arg = blk_rq_pos(req); + if (!mmc_card_blockaddr(card)) + brq->cmd.arg <<= 9; + brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + brq->data.blksz = 512; + brq->stop.opcode = MMC_STOP_TRANSMISSION; + brq->stop.arg = 0; + brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + brq->data.blocks = blk_rq_sectors(req); - if (brq->data.blocks > 1 || do_rel_wr) { - /* SPI multiblock writes terminate using a special - * token, not a STOP_TRANSMISSION request. - */ - if (!mmc_host_is_spi(card->host) || - rq_data_dir(req) == READ) - brq->mrq.stop = &brq->stop; - readcmd = MMC_READ_MULTIPLE_BLOCK; - writecmd = MMC_WRITE_MULTIPLE_BLOCK; - } else { - brq->mrq.stop = NULL; - readcmd = MMC_READ_SINGLE_BLOCK; - writecmd = MMC_WRITE_BLOCK; - } - if (rq_data_dir(req) == READ) { - brq->cmd.opcode = readcmd; - brq->data.flags |= MMC_DATA_READ; - } else { - brq->cmd.opcode = writecmd; - brq->data.flags |= MMC_DATA_WRITE; - } + /* + * The block layer doesn't support all sector count + * restrictions, so we need to be prepared for too big + * requests. + */ + if (brq->data.blocks > card->host->max_blk_count) + brq->data.blocks = card->host->max_blk_count; - if (do_rel_wr) - mmc_apply_rel_rw(brq, card, req); + /* + * After a read error, we redo the request one sector at a time + * in order to accurately determine which sectors can be read + * successfully. + */ + if (disable_multi && brq->data.blocks > 1) + brq->data.blocks = 1; - /* - * Pre-defined multi-block transfers are preferable to - * open ended-ones (and necessary for reliable writes). - * However, it is not sufficient to just send CMD23, - * and avoid the final CMD12, as on an error condition - * CMD12 (stop) needs to be sent anyway. This, coupled - * with Auto-CMD23 enhancements provided by some - * hosts, means that the complexity of dealing - * with this is best left to the host. If CMD23 is - * supported by card and host, we'll fill sbc in and let - * the host deal with handling it correctly. This means - * that for hosts that don't expose MMC_CAP_CMD23, no - * change of behavior will be observed. - * - * N.B: Some MMC cards experience perf degradation. - * We'll avoid using CMD23-bounded multiblock writes for - * these, while retaining features like reliable writes. + if (brq->data.blocks > 1 || do_rel_wr) { + /* SPI multiblock writes terminate using a special + * token, not a STOP_TRANSMISSION request. */ + if (!mmc_host_is_spi(card->host) || + rq_data_dir(req) == READ) + brq->mrq.stop = &brq->stop; + readcmd = MMC_READ_MULTIPLE_BLOCK; + writecmd = MMC_WRITE_MULTIPLE_BLOCK; + } else { + brq->mrq.stop = NULL; + readcmd = MMC_READ_SINGLE_BLOCK; + writecmd = MMC_WRITE_BLOCK; + } + if (rq_data_dir(req) == READ) { + brq->cmd.opcode = readcmd; + brq->data.flags |= MMC_DATA_READ; + } else { + brq->cmd.opcode = writecmd; + brq->data.flags |= MMC_DATA_WRITE; + } - if ((md->flags & MMC_BLK_CMD23) && - mmc_op_multi(brq->cmd.opcode) && - (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) { - brq->sbc.opcode = MMC_SET_BLOCK_COUNT; - brq->sbc.arg = brq->data.blocks | - (do_rel_wr ? (1 << 31) : 0); - brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; - brq->mrq.sbc = &brq->sbc; - } + if (do_rel_wr) + mmc_apply_rel_rw(brq, card, req); - mmc_set_data_timeout(&brq->data, card); + /* + * Pre-defined multi-block transfers are preferable to + * open ended-ones (and necessary for reliable writes). + * However, it is not sufficient to just send CMD23, + * and avoid the final CMD12, as on an error condition + * CMD12 (stop) needs to be sent anyway. This, coupled + * with Auto-CMD23 enhancements provided by some + * hosts, means that the complexity of dealing + * with this is best left to the host. If CMD23 is + * supported by card and host, we'll fill sbc in and let + * the host deal with handling it correctly. This means + * that for hosts that don't expose MMC_CAP_CMD23, no + * change of behavior will be observed. + * + * N.B: Some MMC cards experience perf degradation. + * We'll avoid using CMD23-bounded multiblock writes for + * these, while retaining features like reliable writes. + */ - brq->data.sg = mq->mqrq_cur->sg; - brq->data.sg_len = mmc_queue_map_sg(mq, mq->mqrq_cur); + if ((md->flags & MMC_BLK_CMD23) && + mmc_op_multi(brq->cmd.opcode) && + (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) { + brq->sbc.opcode = MMC_SET_BLOCK_COUNT; + brq->sbc.arg = brq->data.blocks | + (do_rel_wr ? (1 << 31) : 0); + brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; + brq->mrq.sbc = &brq->sbc; + } - /* - * Adjust the sg list so it is the same size as the - * request. - */ - if (brq->data.blocks != blk_rq_sectors(req)) { - int i, data_size = brq->data.blocks << 9; - struct scatterlist *sg; - - for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) { - data_size -= sg->length; - if (data_size <= 0) { - sg->length += data_size; - i++; - break; - } + mmc_set_data_timeout(&brq->data, card); + + brq->data.sg = mqrq->sg; + brq->data.sg_len = mmc_queue_map_sg(mq, mqrq); + + /* + * Adjust the sg list so it is the same size as the + * request. + */ + if (brq->data.blocks != blk_rq_sectors(req)) { + int i, data_size = brq->data.blocks << 9; + struct scatterlist *sg; + + for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) { + data_size -= sg->length; + if (data_size <= 0) { + sg->length += data_size; + i++; + break; } - brq->data.sg_len = i; } + brq->data.sg_len = i; + } - mmc_queue_bounce_pre(mq->mqrq_cur); + mmc_queue_bounce_pre(mqrq); +} +static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_blk_data *md = mq->data; + struct mmc_card *card = md->queue.card; + struct mmc_blk_request *brq = &mq->mqrq_cur->brq; + int ret = 1, disable_multi = 0, retry = 0; + + do { + mmc_blk_rw_rq_prep(mq->mqrq_cur, card, disable_multi, mq); mmc_wait_for_req(card->host, &brq->mrq); mmc_queue_bounce_post(mq->mqrq_cur); |