diff options
author | Hans Verkuil <hans.verkuil@cisco.com> | 2014-07-22 04:21:37 (GMT) |
---|---|---|
committer | Mauro Carvalho Chehab <m.chehab@samsung.com> | 2014-07-22 15:53:33 (GMT) |
commit | 7955f03d18d14d18188f94581a4ea336c94b1e2d (patch) | |
tree | 45adce1032716316b288dde48682280163cdc8d6 | |
parent | 28cae868cd245b6bb2f27bce807e9d78afcf8ea2 (diff) | |
download | linux-7955f03d18d14d18188f94581a4ea336c94b1e2d.tar.xz |
[media] go7007: move out of staging into drivers/media/usb.
Now that the custom motion detection API in this driver has been
replaced with a standard API there is no reason anymore to keep it
in staging. So (finally!) move it to drivers/media/usb.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-rw-r--r-- | drivers/media/usb/Kconfig | 1 | ||||
-rw-r--r-- | drivers/media/usb/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/usb/go7007/Kconfig (renamed from drivers/staging/media/go7007/Kconfig) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/Makefile (renamed from drivers/staging/media/go7007/Makefile) | 4 | ||||
-rw-r--r-- | drivers/media/usb/go7007/go7007-driver.c (renamed from drivers/staging/media/go7007/go7007-driver.c) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/go7007-fw.c (renamed from drivers/staging/media/go7007/go7007-fw.c) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/go7007-i2c.c (renamed from drivers/staging/media/go7007/go7007-i2c.c) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/go7007-loader.c (renamed from drivers/staging/media/go7007/go7007-loader.c) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/go7007-priv.h (renamed from drivers/staging/media/go7007/go7007-priv.h) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/go7007-usb.c (renamed from drivers/staging/media/go7007/go7007-usb.c) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/go7007-v4l2.c (renamed from drivers/staging/media/go7007/go7007-v4l2.c) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/s2250-board.c (renamed from drivers/staging/media/go7007/s2250-board.c) | 0 | ||||
-rw-r--r-- | drivers/media/usb/go7007/snd-go7007.c (renamed from drivers/staging/media/go7007/snd-go7007.c) | 0 | ||||
-rw-r--r-- | drivers/staging/media/Kconfig | 2 | ||||
-rw-r--r-- | drivers/staging/media/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/media/go7007/README | 136 | ||||
-rw-r--r-- | drivers/staging/media/go7007/go7007.txt | 478 | ||||
-rw-r--r-- | drivers/staging/media/go7007/saa7134-go7007.c | 560 |
18 files changed, 2 insertions, 1181 deletions
diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig index fa67519..94d51e0 100644 --- a/drivers/media/usb/Kconfig +++ b/drivers/media/usb/Kconfig @@ -27,6 +27,7 @@ source "drivers/media/usb/hdpvr/Kconfig" source "drivers/media/usb/tlg2300/Kconfig" source "drivers/media/usb/usbvision/Kconfig" source "drivers/media/usb/stk1160/Kconfig" +source "drivers/media/usb/go7007/Kconfig" endif if (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT) diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile index 712a6b1..f438eff 100644 --- a/drivers/media/usb/Makefile +++ b/drivers/media/usb/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/ obj-$(CONFIG_VIDEO_TM6000) += tm6000/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ obj-$(CONFIG_VIDEO_USBTV) += usbtv/ +obj-$(CONFIG_VIDEO_GO7007) += go7007/ diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/media/usb/go7007/Kconfig index 95a3af6..95a3af6 100644 --- a/drivers/staging/media/go7007/Kconfig +++ b/drivers/media/usb/go7007/Kconfig diff --git a/drivers/staging/media/go7007/Makefile b/drivers/media/usb/go7007/Makefile index 9c6ad4a..e99287c 100644 --- a/drivers/staging/media/go7007/Makefile +++ b/drivers/media/usb/go7007/Makefile @@ -8,8 +8,4 @@ go7007-y := go7007-v4l2.o go7007-driver.o go7007-i2c.o go7007-fw.o \ s2250-y := s2250-board.o -# Uncomment when the saa7134 patches get into upstream -#obj-$(CONFIG_VIDEO_SAA7134) += saa7134-go7007.o -#ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/pci/saa7134 - ccflags-$(CONFIG_VIDEO_GO7007_LOADER:m=y) += -Idrivers/media/common diff --git a/drivers/staging/media/go7007/go7007-driver.c b/drivers/media/usb/go7007/go7007-driver.c index 95cffb7..95cffb7 100644 --- a/drivers/staging/media/go7007/go7007-driver.c +++ b/drivers/media/usb/go7007/go7007-driver.c diff --git a/drivers/staging/media/go7007/go7007-fw.c b/drivers/media/usb/go7007/go7007-fw.c index 5f4c9b9..5f4c9b9 100644 --- a/drivers/staging/media/go7007/go7007-fw.c +++ b/drivers/media/usb/go7007/go7007-fw.c diff --git a/drivers/staging/media/go7007/go7007-i2c.c b/drivers/media/usb/go7007/go7007-i2c.c index 55addfa..55addfa 100644 --- a/drivers/staging/media/go7007/go7007-i2c.c +++ b/drivers/media/usb/go7007/go7007-i2c.c diff --git a/drivers/staging/media/go7007/go7007-loader.c b/drivers/media/usb/go7007/go7007-loader.c index 042f78a..042f78a 100644 --- a/drivers/staging/media/go7007/go7007-loader.c +++ b/drivers/media/usb/go7007/go7007-loader.c diff --git a/drivers/staging/media/go7007/go7007-priv.h b/drivers/media/usb/go7007/go7007-priv.h index 2251c3f..2251c3f 100644 --- a/drivers/staging/media/go7007/go7007-priv.h +++ b/drivers/media/usb/go7007/go7007-priv.h diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/media/usb/go7007/go7007-usb.c index ece27ec..ece27ec 100644 --- a/drivers/staging/media/go7007/go7007-usb.c +++ b/drivers/media/usb/go7007/go7007-usb.c diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/media/usb/go7007/go7007-v4l2.c index ec799b4..ec799b4 100644 --- a/drivers/staging/media/go7007/go7007-v4l2.c +++ b/drivers/media/usb/go7007/go7007-v4l2.c diff --git a/drivers/staging/media/go7007/s2250-board.c b/drivers/media/usb/go7007/s2250-board.c index bb84668..bb84668 100644 --- a/drivers/staging/media/go7007/s2250-board.c +++ b/drivers/media/usb/go7007/s2250-board.c diff --git a/drivers/staging/media/go7007/snd-go7007.c b/drivers/media/usb/go7007/snd-go7007.c index d22d7d5..d22d7d5 100644 --- a/drivers/staging/media/go7007/snd-go7007.c +++ b/drivers/media/usb/go7007/snd-go7007.c diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 3312a3b..3323eb5 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -29,8 +29,6 @@ source "drivers/staging/media/davinci_vpfe/Kconfig" source "drivers/staging/media/dt3155v4l/Kconfig" -source "drivers/staging/media/go7007/Kconfig" - source "drivers/staging/media/omap24xx/Kconfig" source "drivers/staging/media/omap4iss/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 205eba2..7db83f3 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/ -obj-$(CONFIG_VIDEO_GO7007) += go7007/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ obj-$(CONFIG_VIDEO_OMAP2) += omap24xx/ diff --git a/drivers/staging/media/go7007/README b/drivers/staging/media/go7007/README deleted file mode 100644 index 34516ea..0000000 --- a/drivers/staging/media/go7007/README +++ /dev/null @@ -1,136 +0,0 @@ -Todo: - - let s2250-board use i2c subdevs as well instead of hardcoding - support for the i2c devices. - - when the driver is moved out of staging, support for saa7134-go7007 - should be added to the saa7134 driver. The patch for that is - included below. - -Patch for saa7134: - -diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c -index dc68cf1..9a53794 100644 ---- a/drivers/media/pci/saa7134/saa7134-cards.c -+++ b/drivers/media/pci/saa7134/saa7134-cards.c -@@ -5790,6 +5790,29 @@ struct saa7134_board saa7134_boards[] = { - .gpio = 0x6010000, - } }, - }, -+ [SAA7134_BOARD_WIS_VOYAGER] = { -+ .name = "WIS Voyager or compatible", -+ .audio_clock = 0x00200000, -+ .tuner_type = TUNER_PHILIPS_TDA8290, -+ .radio_type = UNSET, -+ .tuner_addr = ADDR_UNSET, -+ .radio_addr = ADDR_UNSET, -+ .mpeg = SAA7134_MPEG_GO7007, -+ .inputs = { { -+ .name = name_comp1, -+ .vmux = 0, -+ .amux = LINE2, -+ }, { -+ .name = name_tv, -+ .vmux = 3, -+ .amux = TV, -+ .tv = 1, -+ }, { -+ .name = name_svideo, -+ .vmux = 6, -+ .amux = LINE1, -+ } }, -+ }, - - }; - -@@ -7037,6 +7060,12 @@ struct pci_device_id saa7134_pci_tbl[] = { - .subdevice = 0x0911, - .driver_data = SAA7134_BOARD_SENSORAY811_911, - }, { -+ .vendor = PCI_VENDOR_ID_PHILIPS, -+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133, -+ .subvendor = 0x1905, /* WIS */ -+ .subdevice = 0x7007, -+ .driver_data = SAA7134_BOARD_WIS_VOYAGER, -+ }, { - /* --- boards without eeprom + subsystem ID --- */ - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7134, -diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c -index 8fd24e7..0a849ea 100644 ---- a/drivers/media/pci/saa7134/saa7134-core.c -+++ b/drivers/media/pci/saa7134/saa7134-core.c -@@ -156,6 +156,8 @@ static void request_module_async(struct work_struct *work){ - request_module("saa7134-empress"); - if (card_is_dvb(dev)) - request_module("saa7134-dvb"); -+ if (card_is_go7007(dev)) -+ request_module("saa7134-go7007"); - if (alsa) { - if (dev->pci->device != PCI_DEVICE_ID_PHILIPS_SAA7130) - request_module("saa7134-alsa"); -@@ -557,8 +559,12 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id) - saa7134_irq_vbi_done(dev,status); - - if ((report & SAA7134_IRQ_REPORT_DONE_RA2) && -- card_has_mpeg(dev)) -- saa7134_irq_ts_done(dev,status); -+ card_has_mpeg(dev)) { -+ if (dev->mops->irq_ts_done != NULL) -+ dev->mops->irq_ts_done(dev, status); -+ else -+ saa7134_irq_ts_done(dev, status); -+ } - - if (report & SAA7134_IRQ_REPORT_GPIO16) { - switch (dev->has_remote) { -diff --git a/drivers/media/pci/saa7134/saa7134.h b/drivers/media/pci/saa7134/saa7134.h -index 62169dd..5fad39a 100644 ---- a/drivers/media/pci/saa7134/saa7134.h -+++ b/drivers/media/pci/saa7134/saa7134.h -@@ -334,6 +334,7 @@ struct saa7134_card_ir { - #define SAA7134_BOARD_KWORLD_PC150U 189 - #define SAA7134_BOARD_ASUSTeK_PS3_100 190 - #define SAA7134_BOARD_HAWELL_HW_9004V1 191 -+#define SAA7134_BOARD_WIS_VOYAGER 192 - - #define SAA7134_MAXBOARDS 32 - #define SAA7134_INPUT_MAX 8 -@@ -364,6 +365,7 @@ enum saa7134_mpeg_type { - SAA7134_MPEG_UNUSED, - SAA7134_MPEG_EMPRESS, - SAA7134_MPEG_DVB, -+ SAA7134_MPEG_GO7007, - }; - - enum saa7134_mpeg_ts_type { -@@ -403,6 +405,7 @@ struct saa7134_board { - #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) - #define card_is_empress(dev) (SAA7134_MPEG_EMPRESS == saa7134_boards[dev->board].mpeg) - #define card_is_dvb(dev) (SAA7134_MPEG_DVB == saa7134_boards[dev->board].mpeg) -+#define card_is_go7007(dev) (SAA7134_MPEG_GO7007 == saa7134_boards[dev->board].mpeg) - #define card_has_mpeg(dev) (SAA7134_MPEG_UNUSED != saa7134_boards[dev->board].mpeg) - #define card(dev) (saa7134_boards[dev->board]) - #define card_in(dev,n) (saa7134_boards[dev->board].inputs[n]) -@@ -535,6 +538,8 @@ struct saa7134_mpeg_ops { - int (*init)(struct saa7134_dev *dev); - int (*fini)(struct saa7134_dev *dev); - void (*signal_change)(struct saa7134_dev *dev); -+ void (*irq_ts_done)(struct saa7134_dev *dev, -+ unsigned long status); - }; - - /* global device status */ -diff --git a/drivers/staging/media/go7007/Makefile b/drivers/staging/media/go7007/Makefile -index 9c6ad4a..1b23689 100644 ---- a/drivers/staging/media/go7007/Makefile -+++ b/drivers/staging/media/go7007/Makefile -@@ -8,8 +8,7 @@ go7007-y := go7007-v4l2.o go7007-driver.o go7007-i2c.o go7007-fw.o \ - - s2250-y := s2250-board.o - --# Uncomment when the saa7134 patches get into upstream --#obj-$(CONFIG_VIDEO_SAA7134) += saa7134-go7007.o --#ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/pci/saa7134 -+obj-$(CONFIG_VIDEO_SAA7134) += saa7134-go7007.o -+ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/pci/saa7134 - - ccflags-$(CONFIG_VIDEO_GO7007_LOADER:m=y) += -Idrivers/media/common diff --git a/drivers/staging/media/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt deleted file mode 100644 index c8e5eb0..0000000 --- a/drivers/staging/media/go7007/go7007.txt +++ /dev/null @@ -1,478 +0,0 @@ -This is a driver for the WIS GO7007SB multi-format video encoder. - -Pete Eberlein <pete@sensoray.com> - -The driver was originally released under the GPL and is currently hosted at: -http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver -The go7007 firmware can be acquired from the package on the site above. - -I've modified the driver to support the following Video4Linux2 MPEG -controls, with acceptable values: - -V4L2_CID_MPEG_STREAM_TYPE V4L2_MPEG_STREAM_TYPE_MPEG2_DVD - V4L2_MPEG_STREAM_TYPE_MPEG_ELEM -V4L2_CID_MPEG_VIDEO_ENCODING V4L2_MPEG_VIDEO_ENCODING_MPEG_1 - V4L2_MPEG_VIDEO_ENCODING_MPEG_2 - V4L2_MPEG_VIDEO_ENCODING_MPEG_4 -V4L2_CID_MPEG_VIDEO_ASPECT V4L2_MPEG_VIDEO_ASPECT_1x1 - V4L2_MPEG_VIDEO_ASPECT_4x3 - V4L2_MPEG_VIDEO_ASPECT_16x9 -V4L2_CID_MPEG_VIDEO_GOP_SIZE integer -V4L2_CID_MPEG_VIDEO_BITRATE 64000 .. 10000000 - -These should be used instead of the non-standard GO7007 ioctls described -below. - - -The README files from the orignal package appear below: - ---------------------------------------------------------------------------- - WIS GO7007SB Public Linux Driver ---------------------------------------------------------------------------- - - -*** Please see the file RELEASE-NOTES for important last-minute updates *** - - - 0. OVERVIEW AND LICENSING/DISCLAIMER - - -This driver kit contains Linux drivers for the WIS GO7007SB multi-format -video encoder. Only kernel version 2.6.x is supported. The video stream -is available through the Video4Linux2 API and the audio stream is available -through the ALSA API (or the OSS emulation layer of the ALSA system). - -The files in kernel/ and hotplug/ are licensed under the GNU General Public -License Version 2 from the Free Software Foundation. A copy of the license -is included in the file COPYING. - -The example applications in apps/ and C header files in include/ are -licensed under a permissive license included in the source files which -allows copying, modification and redistribution for any purpose without -attribution. - -The firmware files included in the firmware/ directory may be freely -redistributed only in conjunction with this document; but modification, -tampering and reverse engineering are prohibited. - -MICRONAS USA, INC., MAKES NO WARRANTIES TO ANY PERSON OR ENTITY WITH -RESPECT TO THE SOFTWARE OR ANY DERIVATIVES THEREOF OR ANY SERVICES OR -LICENSES AND DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION -WARRANTIES OF MERCHANTABILITY, SUPPORT, AND FITNESS FOR A PARTICULAR -PURPOSE AND NON-INFRINGEMENT. - - - 1. SYSTEM REQUIREMENTS - - -This driver requires Linux kernel 2.6. Kernel 2.4 is not supported. Using -kernel 2.6.10 or later is recommended, as earlier kernels are known to have -unstable USB 2.0 support. - -A fully built kernel source tree must be available. Typically this will be -linked from "/lib/modules/<KERNEL VERSION>/build" for convenience. If this -link does not exist, an extra parameter will need to be passed to the -`make` command. - -All vendor-built kernels should already be configured properly. However, -for custom-built kernels, the following options need to be enabled in the -kernel as built-in or modules: - - CONFIG_MODULES - Enable loadable module support - CONFIG_FW_LOADER - Hotplug firmware loading support - CONFIG_I2C - I2C support - CONFIG_VIDEO_DEV - Video For Linux - CONFIG_SOUND - Sound card support - CONFIG_SND - Advanced Linux Sound Architecture - CONFIG_USB - Support for Host-side USB - CONFIG_USB_EHCI_HCD - EHCI HCD (USB 2.0) support - -Additionally, to use the example application, the following options need to -be enabled in the ALSA section: - - CONFIG_SND_MIXER_OSS - OSS Mixer API - CONFIG_SND_PCM_OSS - OSS PCM (digital audio) API - -The hotplug scripts, along with the fxload utility, must also be installed. -These scripts can be obtained from <http://linux-hotplug.sourceforge.net/>. -Hotplugging is used for loading firmware into the Cypruss EZ-USB chip using -fxload and for loading firmware into the driver using the firmware agent. - - - 2. COMPILING AND INSTALLING THE DRIVER - - -Most users should be able to compile the driver by simply running: - - $ make - -in the top-level directory of the driver kit. First the kernel modules -will be built, followed by the example applications. - -If the build system is unable to locate the kernel source tree for the -currently-running kernel, or if the module should be built for a kernel -other than the currently-running kernel, an additional parameter will need -to be passed to make to specify the appropriate kernel source directory: - - $ make KERNELSRC=/usr/src/linux-2.6.10-custom3 - -Once the compile completes, the driver and firmware files should be -installed by running: - - $ make install - -The kernel modules will be placed in "/lib/modules/<KERNEL VERSION>/extra" -and the firmware files will be placed in the appropriate hotplug firmware -directory, usually /lib/firmware. In addition, USB maps and scripts will -be placed in /etc/hotplug/usb to enable fxload to initialize the EZ-USB -control chip when the device is connected. - - - 3. PAL/SECAM TUNER CONFIGURATION (TV402U-EU only) - - -The PAL model of the Plextor ConvertX TV402U may require additional -configuration to correctly select the appropriate TV frequency band and -audio subchannel. - -Users with a device other than the Plextor ConvertX TV402U-EU should skip -this section. - -The wide variety of PAL TV systems used in Europe requires that additional -information about the local TV standards be passed to the driver in order -to properly tune TV channels. The two necessary parameters are (a) the PAL -TV band, and (b) the audio subchannel format in use. - -In many cases, the appropriate TV band selection is passed to the driver -from applications. However, in some cases, the application only specifies -that the driver should use PAL but not the specific information about the -appropriate TV band. To work around this issue, the correct TV band may be -specified in the "force_band" parameter to the wis-sony-tuner module: - - TV band force_band - ------- ---------- - PAL B/G B - PAL I I - PAL D/K D - SECAM L L - -If the "force_band" parameter is specified, the driver will ignore any TV -band specified by applications and will always use the band provided in the -module parameter. - -The other parameter that can be specified is the audio subchannel format. -There are several stereo audio carrier systems in use, including NICAM and -three varieties of A2. To receive audio broadcast on one of these stereo -carriers, the "force_mpx_mode" parameter must be specified to the -wis-sony-tuner module. - - TV band Audio subcarrier force_mpx_mode - ------- ---------------- -------------- - PAL B/G Mono (default) 1 - PAL B/G A2 2 - PAL B/G NICAM 3 - PAL I Mono (default) 4 - PAL I NICAM 5 - PAL D/K Mono (default) 6 - PAL D/K A2 (1) 7 - PAL D/K A2 (2) 8 - PAL D/K A2 (3) 9 - PAL D/K NICAM 10 - SECAM L Mono (default) 11 - SECAM L NICAM 12 - -If the "force_mpx_mode" parameter is not specified, the correct mono-only -mode will be chosen based on the TV band. However, the tuner will not -receive stereo audio or bilingual broadcasts correctly. - -To pass the "force_band" or "force_mpx_mode" parameters to the -wis-sony-tuner module, the following line must be added to the modprobe -configuration file, which varies from one Linux distribution to another. - - options wis-sony-tuner force_band=B force_mpx_mode=2 - -The above example would force the tuner to the PAL B/G TV band and receive -stereo audio broadcasts on the A2 carrier. - -To verify that the configuration has been placed in the correct location, -execute: - - $ modprobe -c | grep wis-sony-tuner - -If the configuration line appears, then modprobe will pass the parameters -correctly the next time the wis-sony-tuner module is loaded into the -kernel. - - - 4. TESTING THE DRIVER - - -Because few Linux applications are able to correctly capture from -Video4Linux2 devices with only compressed formats supported, the new driver -should be tested with the "gorecord" application in the apps/ directory. - -First connect a video source to the device, such as a DVD player or VCR. -This will be captured to a file for testing the driver. If an input source -is unavailable, a test file can still be captured, but the video will be -black and the audio will be silent. - -This application will auto-detect the V4L2 and ALSA/OSS device names of the -hardware and will record video and audio to an AVI file for a specified -number of seconds. For example: - - $ apps/gorecord -duration 60 capture.avi - -If this application does not successfully record an AVI file, the error -messages produced by gorecord and recorded in the system log (usually in -/var/log/messages) should provide information to help resolve the problem. - -Supplying no parameters to gorecord will cause it to probe the available -devices and exit. Use the -help flag for usage information. - - - 5. USING THE DRIVER - - -The V4L2 device implemented by the driver provides a standard compressed -format API, within the following criteria: - - * Applications that only support the original Video4Linux1 API will not - be able to communicate with this driver at all. - - * No raw video modes are supported, so applications like xawtv that - expect only uncompressed video will not function. - - * Supported compression formats are: Motion-JPEG, MPEG1, MPEG2 and MPEG4. - - * MPEG video formats are delivered as Video Elementary Streams only. - Program Stream (PS), Transport Stream (TS) and Packetized Elementary - Stream (PES) formats are not supported. - - * Video parameters such as format and input port may not be changed while - the encoder is active. - - * The audio capture device only functions when the video encoder is - actively capturing video. Attempts to read from the audio device when - the encoder is inactive will result in an I/O error. - - * The native format of the audio device is 48Khz 2-channel 16-bit - little-endian PCM, delivered through the ALSA system. No audio - compression is implemented in the hardware. ALSA may convert to other - uncompressed formats on the fly. - -The include/ directory contains a C header file describing non-standard -features of the GO7007SB encoder, which are described below: - - - GO7007IOC_S_COMP_PARAMS, GO7007IOC_G_COMP_PARAMS - - These ioctls are used to negotiate general compression parameters. - - To query the current parameters, call the GO7007IOC_G_COMP_PARAMS ioctl - with a pointer to a struct go7007_comp_params. If the driver is not - set to MPEG format, the EINVAL error code will be returned. - - To change the current parameters, initialize all fields of a struct - go7007_comp_params and call the GO7007_IOC_S_COMP_PARAMS ioctl with a - pointer to this structure. The driver will return the current - parameters with any necessary changes to conform to the limitations of - the hardware or current compression mode. Any or all fields can be set - to zero to request a reasonable default value. If the driver is not - set to MPEG format, the EINVAL error code will be returned. When I/O - is in progress, the EBUSY error code will be returned. - - Fields in struct go7007_comp_params: - - __u32 The maximum number of frames in each - gop_size Group Of Pictures; i.e. the maximum - number of frames minus one between - each key frame. - - __u32 The maximum number of sequential - max_b_frames bidirectionally-predicted frames. - (B-frames are not yet supported.) - - enum go7007_aspect_ratio The aspect ratio to be encoded in the - aspect_ratio meta-data of the compressed format. - - Choices are: - GO7007_ASPECT_RATIO_1_1 - GO7007_ASPECT_RATIO_4_3_NTSC - GO7007_ASPECT_RATIO_4_3_PAL - GO7007_ASPECT_RATIO_16_9_NTSC - GO7007_ASPECT_RATIO_16_9_PAL - - __u32 Bit-wise OR of control flags (below) - flags - - Flags in struct go7007_comp_params: - - GO7007_COMP_CLOSED_GOP Only produce self-contained GOPs, used - to produce streams appropriate for - random seeking. - - GO7007_COMP_OMIT_SEQ_HEADER Omit the stream sequence header. - - - GO7007IOC_S_MPEG_PARAMS, GO7007IOC_G_MPEG_PARAMS - - These ioctls are used to negotiate MPEG-specific stream parameters when - the pixelformat has been set to V4L2_PIX_FMT_MPEG. - - To query the current parameters, call the GO7007IOC_G_MPEG_PARAMS ioctl - with a pointer to a struct go7007_mpeg_params. If the driver is not - set to MPEG format, the EINVAL error code will be returned. - - To change the current parameters, initialize all fields of a struct - go7007_mpeg_params and call the GO7007_IOC_S_MPEG_PARAMS ioctl with a - pointer to this structure. The driver will return the current - parameters with any necessary changes to conform to the limitations of - the hardware or selected MPEG mode. Any or all fields can be set to - zero to request a reasonable default value. If the driver is not set - to MPEG format, the EINVAL error code will be returned. When I/O is in - progress, the EBUSY error code will be returned. - - Fields in struct go7007_mpeg_params: - - enum go7007_mpeg_video_standard - mpeg_video_standard The MPEG video standard in which to - compress the video. - - Choices are: - GO7007_MPEG_VIDEO_MPEG1 - GO7007_MPEG_VIDEO_MPEG2 - GO7007_MPEG_VIDEO_MPEG4 - - __u32 Bit-wise OR of control flags (below) - flags - - __u32 The profile and level indication to be - pali stored in the sequence header. This - is only used as an indicator to the - decoder, and does not affect the MPEG - features used in the video stream. - Not valid for MPEG1. - - Choices for MPEG2 are: - GO7007_MPEG2_PROFILE_MAIN_MAIN - - Choices for MPEG4 are: - GO7007_MPEG4_PROFILE_S_L0 - GO7007_MPEG4_PROFILE_S_L1 - GO7007_MPEG4_PROFILE_S_L2 - GO7007_MPEG4_PROFILE_S_L3 - GO7007_MPEG4_PROFILE_ARTS_L1 - GO7007_MPEG4_PROFILE_ARTS_L2 - GO7007_MPEG4_PROFILE_ARTS_L3 - GO7007_MPEG4_PROFILE_ARTS_L4 - GO7007_MPEG4_PROFILE_AS_L0 - GO7007_MPEG4_PROFILE_AS_L1 - GO7007_MPEG4_PROFILE_AS_L2 - GO7007_MPEG4_PROFILE_AS_L3 - GO7007_MPEG4_PROFILE_AS_L4 - GO7007_MPEG4_PROFILE_AS_L5 - - Flags in struct go7007_mpeg_params: - - GO7007_MPEG_FORCE_DVD_MODE Force all compression parameters and - bitrate control settings to comply - with DVD MPEG2 stream requirements. - This overrides most compression and - bitrate settings! - - GO7007_MPEG_OMIT_GOP_HEADER Omit the GOP header. - - GO7007_MPEG_REPEAT_SEQHEADER Repeat the MPEG sequence header at - the start of each GOP. - - - GO7007IOC_S_BITRATE, GO7007IOC_G_BITRATE - - These ioctls are used to set and query the target bitrate value for the - compressed video stream. The bitrate may be selected by storing the - target bits per second in an int and calling GO7007IOC_S_BITRATE with a - pointer to the int. The bitrate may be queried by calling - GO7007IOC_G_BITRATE with a pointer to an int where the current bitrate - will be stored. - - Note that this is the primary means of controlling the video quality - for all compression modes, including V4L2_PIX_FMT_MJPEG. The - VIDIOC_S_JPEGCOMP ioctl is not supported. - - ----------------------------------------------------------------------------- - Installing the WIS PCI Voyager Driver ---------------------------------------------------------------------------- - -The WIS PCI Voyager driver requires several patches to the Linux 2.6.11.x -kernel source tree before compiling the driver. These patches update the -in-kernel SAA7134 driver to the newest development version and patch bugs -in the TDA8290/TDA8275 tuner driver. - -The following patches must be downloaded from Gerd Knorr's website and -applied in the order listed: - - http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner - http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner2 - http://dl.bytesex.org/patches/2.6.11-2/v4l2-api-mpeg - http://dl.bytesex.org/patches/2.6.11-2/saa7134-update - -The following patches are included with this SDK and can be applied in any -order: - - patches/2.6.11/saa7134-voyager.diff - patches/2.6.11/tda8275-newaddr.diff - patches/2.6.11/tda8290-ntsc.diff - -Check to make sure the CONFIG_VIDEO_SAA7134 option is enabled in the kernel -configuration, and build and install the kernel. - -After rebooting into the new kernel, the GO7007 driver can be compiled and -installed: - - $ make SAA7134_BUILD=y - $ make install - $ modprobe saa7134-go7007 - -There will be two V4L video devices associated with the PCI Voyager. The -first device (most likely /dev/video0) provides access to the raw video -capture mode of the SAA7133 device and is used to configure the source -video parameters and tune the TV tuner. This device can be used with xawtv -or other V4L(2) video software as a standard uncompressed device. - -The second device (most likely /dev/video1) provides access to the -compression functions of the GO7007. It can be tested using the gorecord -application in the apps/ directory of this SDK: - - $ apps/gorecord -vdevice /dev/video1 -noaudio test.avi - -Currently the frame resolution is fixed at 720x480 (NTSC) or 720x576 (PAL), -and the video standard must be specified to both the raw and the compressed -video devices (xawtv and gorecord, for example). - - --------------------------------------------------------------------------- -RELEASE NOTES FOR WIS GO7007SB LINUX DRIVER ---------------------------------------------------------------------------- - -Last updated: 5 November 2005 - - - Release 0.9.7 includes new support for using udev to run fxload. The - install script should automatically detect whether the old hotplug - scripts or the new udev rules should be used. To force the use of - hotplug, run "make install USE_UDEV=n". To force the use of udev, run - "make install USE_UDEV=y". - - - Motion detection is supported but undocumented. Try the `modet` app - for a demonstration of how to use the facility. - - - Using USB2.0 devices such as the TV402U with USB1.1 HCDs or hubs can - cause buffer overruns and frame drops, even at low framerates, due to - inconsistency in the bitrate control mechanism. - - - On devices with an SAA7115, including the Plextor ConvertX, video height - values of 96, 128, 160, 192, 256, 320, and 384 do not work in NTSC mode. - All valid heights up to 512 work correctly in PAL mode. - - - The WIS Star Trek and PCI Voyager boards have no support yet for audio - or the TV tuner. diff --git a/drivers/staging/media/go7007/saa7134-go7007.c b/drivers/staging/media/go7007/saa7134-go7007.c deleted file mode 100644 index b137432..0000000 --- a/drivers/staging/media/go7007/saa7134-go7007.c +++ /dev/null @@ -1,560 +0,0 @@ -/* - * Copyright (C) 2005-2006 Micronas USA Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/wait.h> -#include <linux/list.h> -#include <linux/slab.h> -#include <linux/time.h> -#include <linux/mm.h> -#include <linux/usb.h> -#include <linux/i2c.h> -#include <asm/byteorder.h> -#include <media/v4l2-common.h> -#include <media/v4l2-device.h> -#include <media/v4l2-subdev.h> - -#include "saa7134.h" -#include "saa7134-reg.h" -#include "go7007-priv.h" - -/*#define GO7007_HPI_DEBUG*/ - -enum hpi_address { - HPI_ADDR_VIDEO_BUFFER = 0xe4, - HPI_ADDR_INIT_BUFFER = 0xea, - HPI_ADDR_INTR_RET_VALUE = 0xee, - HPI_ADDR_INTR_RET_DATA = 0xec, - HPI_ADDR_INTR_STATUS = 0xf4, - HPI_ADDR_INTR_WR_PARAM = 0xf6, - HPI_ADDR_INTR_WR_INDEX = 0xf8, -}; - -enum gpio_command { - GPIO_COMMAND_RESET = 0x00, /* 000b */ - GPIO_COMMAND_REQ1 = 0x04, /* 001b */ - GPIO_COMMAND_WRITE = 0x20, /* 010b */ - GPIO_COMMAND_REQ2 = 0x24, /* 011b */ - GPIO_COMMAND_READ = 0x80, /* 100b */ - GPIO_COMMAND_VIDEO = 0x84, /* 101b */ - GPIO_COMMAND_IDLE = 0xA0, /* 110b */ - GPIO_COMMAND_ADDR = 0xA4, /* 111b */ -}; - -struct saa7134_go7007 { - struct v4l2_subdev sd; - struct saa7134_dev *dev; - u8 *top; - u8 *bottom; - dma_addr_t top_dma; - dma_addr_t bottom_dma; -}; - -static inline struct saa7134_go7007 *to_state(struct v4l2_subdev *sd) -{ - return container_of(sd, struct saa7134_go7007, sd); -} - -static const struct go7007_board_info board_voyager = { - .flags = 0, - .sensor_flags = GO7007_SENSOR_656 | - GO7007_SENSOR_VALID_ENABLE | - GO7007_SENSOR_TV | - GO7007_SENSOR_VBI, - .audio_flags = GO7007_AUDIO_I2S_MODE_1 | - GO7007_AUDIO_WORD_16, - .audio_rate = 48000, - .audio_bclk_div = 8, - .audio_main_div = 2, - .hpi_buffer_cap = 7, - .num_inputs = 1, - .inputs = { - { - .name = "SAA7134", - }, - }, -}; - -/********************* Driver for GPIO HPI interface *********************/ - -static int gpio_write(struct saa7134_dev *dev, u8 addr, u16 data) -{ - saa_writeb(SAA7134_GPIO_GPMODE0, 0xff); - - /* Write HPI address */ - saa_writeb(SAA7134_GPIO_GPSTATUS0, addr); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - - /* Write low byte */ - saa_writeb(SAA7134_GPIO_GPSTATUS0, data & 0xff); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - - /* Write high byte */ - saa_writeb(SAA7134_GPIO_GPSTATUS0, data >> 8); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - - return 0; -} - -static int gpio_read(struct saa7134_dev *dev, u8 addr, u16 *data) -{ - saa_writeb(SAA7134_GPIO_GPMODE0, 0xff); - - /* Write HPI address */ - saa_writeb(SAA7134_GPIO_GPSTATUS0, addr); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - - saa_writeb(SAA7134_GPIO_GPMODE0, 0x00); - - /* Read low byte */ - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_READ); - saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - *data = saa_readb(SAA7134_GPIO_GPSTATUS0); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - - /* Read high byte */ - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_READ); - saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - *data |= saa_readb(SAA7134_GPIO_GPSTATUS0) << 8; - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - - return 0; -} - -static int saa7134_go7007_interface_reset(struct go7007 *go) -{ - struct saa7134_go7007 *saa = go->hpi_context; - struct saa7134_dev *dev = saa->dev; - u32 status; - u16 intr_val, intr_data; - int count = 20; - - saa_clearb(SAA7134_TS_PARALLEL, 0x80); /* Disable TS interface */ - saa_writeb(SAA7134_GPIO_GPMODE2, 0xa4); - saa_writeb(SAA7134_GPIO_GPMODE0, 0xff); - - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_RESET); - msleep(1); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ2); - msleep(10); - - saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - - status = saa_readb(SAA7134_GPIO_GPSTATUS2); - /*pr_debug("status is %s\n", status & 0x40 ? "OK" : "not OK"); */ - - /* enter command mode...(?) */ - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ2); - - do { - saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - status = saa_readb(SAA7134_GPIO_GPSTATUS2); - /*pr_info("gpio is %08x\n", saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)); */ - } while (--count > 0); - - /* Wait for an interrupt to indicate successful hardware reset */ - if (go7007_read_interrupt(go, &intr_val, &intr_data) < 0 || - (intr_val & ~0x1) != 0x55aa) { - pr_err("saa7134-go7007: unable to reset the GO7007\n"); - return -1; - } - return 0; -} - -static int saa7134_go7007_write_interrupt(struct go7007 *go, int addr, int data) -{ - struct saa7134_go7007 *saa = go->hpi_context; - struct saa7134_dev *dev = saa->dev; - int i; - u16 status_reg; - -#ifdef GO7007_HPI_DEBUG - pr_debug("saa7134-go7007: WriteInterrupt: %04x %04x\n", addr, data); -#endif - - for (i = 0; i < 100; ++i) { - gpio_read(dev, HPI_ADDR_INTR_STATUS, &status_reg); - if (!(status_reg & 0x0010)) - break; - msleep(10); - } - if (i == 100) { - pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n", - status_reg); - return -1; - } - gpio_write(dev, HPI_ADDR_INTR_WR_PARAM, data); - gpio_write(dev, HPI_ADDR_INTR_WR_INDEX, addr); - - return 0; -} - -static int saa7134_go7007_read_interrupt(struct go7007 *go) -{ - struct saa7134_go7007 *saa = go->hpi_context; - struct saa7134_dev *dev = saa->dev; - - /* XXX we need to wait if there is no interrupt available */ - go->interrupt_available = 1; - gpio_read(dev, HPI_ADDR_INTR_RET_VALUE, &go->interrupt_value); - gpio_read(dev, HPI_ADDR_INTR_RET_DATA, &go->interrupt_data); -#ifdef GO7007_HPI_DEBUG - pr_debug("saa7134-go7007: ReadInterrupt: %04x %04x\n", - go->interrupt_value, go->interrupt_data); -#endif - return 0; -} - -static void saa7134_go7007_irq_ts_done(struct saa7134_dev *dev, - unsigned long status) -{ - struct go7007 *go = video_get_drvdata(dev->empress_dev); - struct saa7134_go7007 *saa = go->hpi_context; - - if (!vb2_is_streaming(&go->vidq)) - return; - if (0 != (status & 0x000f0000)) - pr_debug("saa7134-go7007: irq: lost %ld\n", - (status >> 16) & 0x0f); - if (status & 0x100000) { - dma_sync_single_for_cpu(&dev->pci->dev, - saa->bottom_dma, PAGE_SIZE, DMA_FROM_DEVICE); - go7007_parse_video_stream(go, saa->bottom, PAGE_SIZE); - saa_writel(SAA7134_RS_BA2(5), cpu_to_le32(saa->bottom_dma)); - } else { - dma_sync_single_for_cpu(&dev->pci->dev, - saa->top_dma, PAGE_SIZE, DMA_FROM_DEVICE); - go7007_parse_video_stream(go, saa->top, PAGE_SIZE); - saa_writel(SAA7134_RS_BA1(5), cpu_to_le32(saa->top_dma)); - } -} - -static int saa7134_go7007_stream_start(struct go7007 *go) -{ - struct saa7134_go7007 *saa = go->hpi_context; - struct saa7134_dev *dev = saa->dev; - - saa->top_dma = dma_map_page(&dev->pci->dev, virt_to_page(saa->top), - 0, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(&dev->pci->dev, saa->top_dma)) - return -ENOMEM; - saa->bottom_dma = dma_map_page(&dev->pci->dev, - virt_to_page(saa->bottom), - 0, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(&dev->pci->dev, saa->bottom_dma)) { - dma_unmap_page(&dev->pci->dev, saa->top_dma, PAGE_SIZE, - DMA_FROM_DEVICE); - return -ENOMEM; - } - - saa_writel(SAA7134_VIDEO_PORT_CTRL0 >> 2, 0xA300B000); - saa_writel(SAA7134_VIDEO_PORT_CTRL4 >> 2, 0x40000200); - - /* Set HPI interface for video */ - saa_writeb(SAA7134_GPIO_GPMODE0, 0xff); - saa_writeb(SAA7134_GPIO_GPSTATUS0, HPI_ADDR_VIDEO_BUFFER); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR); - saa_writeb(SAA7134_GPIO_GPMODE0, 0x00); - - /* Enable TS interface */ - saa_writeb(SAA7134_TS_PARALLEL, 0xe6); - - /* Reset TS interface */ - saa_setb(SAA7134_TS_SERIAL1, 0x01); - saa_clearb(SAA7134_TS_SERIAL1, 0x01); - - /* Set up transfer block size */ - saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 128 - 1); - saa_writeb(SAA7134_TS_DMA0, (PAGE_SIZE >> 7) - 1); - saa_writeb(SAA7134_TS_DMA1, 0); - saa_writeb(SAA7134_TS_DMA2, 0); - - /* Enable video streaming mode */ - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_VIDEO); - - saa_writel(SAA7134_RS_BA1(5), cpu_to_le32(saa->top_dma)); - saa_writel(SAA7134_RS_BA2(5), cpu_to_le32(saa->bottom_dma)); - saa_writel(SAA7134_RS_PITCH(5), 128); - saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_MAX); - - /* Enable TS FIFO */ - saa_setl(SAA7134_MAIN_CTRL, SAA7134_MAIN_CTRL_TE5); - - /* Enable DMA IRQ */ - saa_setl(SAA7134_IRQ1, - SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0); - - return 0; -} - -static int saa7134_go7007_stream_stop(struct go7007 *go) -{ - struct saa7134_go7007 *saa = go->hpi_context; - struct saa7134_dev *dev; - - if (!saa) - return -EINVAL; - dev = saa->dev; - if (!dev) - return -EINVAL; - - /* Shut down TS FIFO */ - saa_clearl(SAA7134_MAIN_CTRL, SAA7134_MAIN_CTRL_TE5); - - /* Disable DMA IRQ */ - saa_clearl(SAA7134_IRQ1, - SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0); - - /* Disable TS interface */ - saa_clearb(SAA7134_TS_PARALLEL, 0x80); - - dma_unmap_page(&dev->pci->dev, saa->top_dma, PAGE_SIZE, - DMA_FROM_DEVICE); - dma_unmap_page(&dev->pci->dev, saa->bottom_dma, PAGE_SIZE, - DMA_FROM_DEVICE); - - return 0; -} - -static int saa7134_go7007_send_firmware(struct go7007 *go, u8 *data, int len) -{ - struct saa7134_go7007 *saa = go->hpi_context; - struct saa7134_dev *dev = saa->dev; - u16 status_reg; - int i; - -#ifdef GO7007_HPI_DEBUG - pr_debug("saa7134-go7007: DownloadBuffer sending %d bytes\n", len); -#endif - - while (len > 0) { - i = len > 64 ? 64 : len; - saa_writeb(SAA7134_GPIO_GPMODE0, 0xff); - saa_writeb(SAA7134_GPIO_GPSTATUS0, HPI_ADDR_INIT_BUFFER); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - while (i-- > 0) { - saa_writeb(SAA7134_GPIO_GPSTATUS0, *data); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE); - saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE); - ++data; - --len; - } - for (i = 0; i < 100; ++i) { - gpio_read(dev, HPI_ADDR_INTR_STATUS, &status_reg); - if (!(status_reg & 0x0002)) - break; - } - if (i == 100) { - pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n", - status_reg); - return -1; - } - } - return 0; -} - -static struct go7007_hpi_ops saa7134_go7007_hpi_ops = { - .interface_reset = saa7134_go7007_interface_reset, - .write_interrupt = saa7134_go7007_write_interrupt, - .read_interrupt = saa7134_go7007_read_interrupt, - .stream_start = saa7134_go7007_stream_start, - .stream_stop = saa7134_go7007_stream_stop, - .send_firmware = saa7134_go7007_send_firmware, -}; -MODULE_FIRMWARE("go7007/go7007tv.bin"); - -/* --------------------------------------------------------------------------*/ - -static int saa7134_go7007_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) -{ - struct saa7134_go7007 *saa = to_state(sd); - struct saa7134_dev *dev = saa->dev; - - return saa7134_s_std_internal(dev, NULL, norm); -} - -static int saa7134_go7007_queryctrl(struct v4l2_subdev *sd, - struct v4l2_queryctrl *query) -{ - return saa7134_queryctrl(NULL, NULL, query); -} -static int saa7134_go7007_s_ctrl(struct v4l2_subdev *sd, - struct v4l2_control *ctrl) -{ - struct saa7134_go7007 *saa = to_state(sd); - struct saa7134_dev *dev = saa->dev; - - return saa7134_s_ctrl_internal(dev, NULL, ctrl); -} - -static int saa7134_go7007_g_ctrl(struct v4l2_subdev *sd, - struct v4l2_control *ctrl) -{ - struct saa7134_go7007 *saa = to_state(sd); - struct saa7134_dev *dev = saa->dev; - - return saa7134_g_ctrl_internal(dev, NULL, ctrl); -} - -/* --------------------------------------------------------------------------*/ - -static const struct v4l2_subdev_core_ops saa7134_go7007_core_ops = { - .g_ctrl = saa7134_go7007_g_ctrl, - .s_ctrl = saa7134_go7007_s_ctrl, - .queryctrl = saa7134_go7007_queryctrl, -}; - -static const struct v4l2_subdev_video_ops saa7134_go7007_video_ops = { - .s_std = saa7134_go7007_s_std, -}; - -static const struct v4l2_subdev_ops saa7134_go7007_sd_ops = { - .core = &saa7134_go7007_core_ops, - .video = &saa7134_go7007_video_ops, -}; - -/* --------------------------------------------------------------------------*/ - - -/********************* Add/remove functions *********************/ - -static int saa7134_go7007_init(struct saa7134_dev *dev) -{ - struct go7007 *go; - struct saa7134_go7007 *saa; - struct v4l2_subdev *sd; - - pr_debug("saa7134-go7007: probing new SAA713X board\n"); - - go = go7007_alloc(&board_voyager, &dev->pci->dev); - if (go == NULL) - return -ENOMEM; - - saa = kzalloc(sizeof(struct saa7134_go7007), GFP_KERNEL); - if (saa == NULL) { - kfree(go); - return -ENOMEM; - } - - go->board_id = GO7007_BOARDID_PCI_VOYAGER; - snprintf(go->bus_info, sizeof(go->bus_info), "PCI:%s", pci_name(dev->pci)); - strlcpy(go->name, saa7134_boards[dev->board].name, sizeof(go->name)); - go->hpi_ops = &saa7134_go7007_hpi_ops; - go->hpi_context = saa; - saa->dev = dev; - - /* Init the subdevice interface */ - sd = &saa->sd; - v4l2_subdev_init(sd, &saa7134_go7007_sd_ops); - v4l2_set_subdevdata(sd, saa); - strncpy(sd->name, "saa7134-go7007", sizeof(sd->name)); - - /* Allocate a couple pages for receiving the compressed stream */ - saa->top = (u8 *)get_zeroed_page(GFP_KERNEL); - if (!saa->top) - goto allocfail; - saa->bottom = (u8 *)get_zeroed_page(GFP_KERNEL); - if (!saa->bottom) - goto allocfail; - - /* Boot the GO7007 */ - if (go7007_boot_encoder(go, go->board_info->flags & - GO7007_BOARD_USE_ONBOARD_I2C) < 0) - goto allocfail; - - /* Do any final GO7007 initialization, then register the - * V4L2 and ALSA interfaces */ - if (go7007_register_encoder(go, go->board_info->num_i2c_devs) < 0) - goto allocfail; - - /* Register the subdevice interface with the go7007 device */ - if (v4l2_device_register_subdev(&go->v4l2_dev, sd) < 0) - pr_info("saa7134-go7007: register subdev failed\n"); - - dev->empress_dev = &go->vdev; - - go->status = STATUS_ONLINE; - return 0; - -allocfail: - if (saa->top) - free_page((unsigned long)saa->top); - if (saa->bottom) - free_page((unsigned long)saa->bottom); - kfree(saa); - kfree(go); - return -ENOMEM; -} - -static int saa7134_go7007_fini(struct saa7134_dev *dev) -{ - struct go7007 *go; - struct saa7134_go7007 *saa; - - if (NULL == dev->empress_dev) - return 0; - - go = video_get_drvdata(dev->empress_dev); - if (go->audio_enabled) - go7007_snd_remove(go); - - saa = go->hpi_context; - go->status = STATUS_SHUTDOWN; - free_page((unsigned long)saa->top); - free_page((unsigned long)saa->bottom); - v4l2_device_unregister_subdev(&saa->sd); - kfree(saa); - video_unregister_device(&go->vdev); - - v4l2_device_put(&go->v4l2_dev); - dev->empress_dev = NULL; - - return 0; -} - -static struct saa7134_mpeg_ops saa7134_go7007_ops = { - .type = SAA7134_MPEG_GO7007, - .init = saa7134_go7007_init, - .fini = saa7134_go7007_fini, - .irq_ts_done = saa7134_go7007_irq_ts_done, -}; - -static int __init saa7134_go7007_mod_init(void) -{ - return saa7134_ts_register(&saa7134_go7007_ops); -} - -static void __exit saa7134_go7007_mod_cleanup(void) -{ - saa7134_ts_unregister(&saa7134_go7007_ops); -} - -module_init(saa7134_go7007_mod_init); -module_exit(saa7134_go7007_mod_cleanup); - -MODULE_LICENSE("GPL v2"); |