diff options
author | Stephen Warren <swarren@wwwdotorg.org> | 2013-11-27 01:58:01 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-12-03 17:01:45 (GMT) |
commit | 831eae69a855983099072e0c0e490bca6f02d54e (patch) | |
tree | df2040d8c8d7778f84db94b1efbb9a72e51e5bb5 | |
parent | f4b406dc43af155715ad6bfd72d742db7d9c01ac (diff) | |
download | linux-831eae69a855983099072e0c0e490bca6f02d54e.tar.xz |
staging: dwc2: set up all module params
The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non-
default parameters. Select these based on the compatible value from the
DT node. For all other HW, fall back to the default parameters currently
in use.
The values in params_bcm2835[] were posted to the mailing list by Paul
quite some time ago. I made a couple of minor modifications since then;
to set ahbcfg instead of ahb_single, and to set uframe_sched.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | Documentation/devicetree/bindings/staging/dwc2.txt | 4 | ||||
-rw-r--r-- | drivers/staging/dwc2/platform.c | 58 |
2 files changed, 51 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt index 1a1b7cf..8b60e90 100644 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ b/Documentation/devicetree/bindings/staging/dwc2.txt @@ -2,7 +2,9 @@ Platform DesignWare HS OTG USB 2.0 controller ----------------------------------------------------- Required properties: -- compatible : "snps,dwc2" +- compatible : One of: + - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. + - snps,dwc2: A generic DWC2 USB controller with default parameters. - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c index 4d9fac0..28a78fe 100644 --- a/drivers/staging/dwc2/platform.c +++ b/drivers/staging/dwc2/platform.c @@ -39,6 +39,7 @@ #include <linux/slab.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include "core.h" @@ -46,6 +47,34 @@ static const char dwc2_driver_name[] = "dwc2"; +static const struct dwc2_core_params params_bcm2835 = { + .otg_cap = 0, /* HNP/SRP capable */ + .otg_ver = 0, /* 1.3 */ + .dma_enable = 1, + .dma_desc_enable = 0, + .speed = 0, /* High Speed */ + .enable_dynamic_fifo = 1, + .en_multiple_tx_fifo = 1, + .host_rx_fifo_size = 774, /* 774 DWORDs */ + .host_nperio_tx_fifo_size = 256, /* 256 DWORDs */ + .host_perio_tx_fifo_size = 512, /* 512 DWORDs */ + .max_transfer_size = 65535, + .max_packet_count = 511, + .host_channels = 8, + .phy_type = 1, /* UTMI */ + .phy_utmi_width = 8, /* 8 bits */ + .phy_ulpi_ddr = 0, /* Single */ + .phy_ulpi_ext_vbus = 0, + .i2c_enable = 0, + .ulpi_fs_ls = 0, + .host_support_fs_ls_low_power = 0, + .host_ls_low_power_phy_clk = 0, /* 48 MHz */ + .ts_dline = 0, + .reload_ctl = 0, + .ahbcfg = 0x10, + .uframe_sched = 1, +}; + /** * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the * DWC_otg driver @@ -66,6 +95,13 @@ static int dwc2_driver_remove(struct platform_device *dev) return 0; } +static const struct of_device_id dwc2_of_match_table[] = { + { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "snps,dwc2", .data = NULL }, + {}, +}; +MODULE_DEVICE_TABLE(of, dwc2_of_match_table); + /** * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg * driver @@ -80,14 +116,22 @@ static int dwc2_driver_remove(struct platform_device *dev) */ static int dwc2_driver_probe(struct platform_device *dev) { + const struct of_device_id *match; + const struct dwc2_core_params *params; + struct dwc2_core_params defparams; struct dwc2_hsotg *hsotg; struct resource *res; int retval; int irq; - struct dwc2_core_params params; - /* Default all params to autodetect */ - dwc2_set_all_params(¶ms, -1); + match = of_match_device(dwc2_of_match_table, &dev->dev); + if (match && match->data) { + params = match->data; + } else { + /* Default all params to autodetect */ + dwc2_set_all_params(&defparams, -1); + params = &defparams; + } hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); if (!hsotg) @@ -118,7 +162,7 @@ static int dwc2_driver_probe(struct platform_device *dev) dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", (unsigned long)res->start, hsotg->regs); - retval = dwc2_hcd_init(hsotg, irq, ¶ms); + retval = dwc2_hcd_init(hsotg, irq, params); if (retval) return retval; @@ -127,12 +171,6 @@ static int dwc2_driver_probe(struct platform_device *dev) return retval; } -static const struct of_device_id dwc2_of_match_table[] = { - { .compatible = "snps,dwc2" }, - {}, -}; -MODULE_DEVICE_TABLE(of, dwc2_of_match_table); - static struct platform_driver dwc2_platform_driver = { .driver = { .name = dwc2_driver_name, |