diff options
author | Eric W. Biederman <ebiederm@xmission.com> | 2006-10-04 09:16:55 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-10-04 14:55:29 (GMT) |
commit | 8b955b0dddb35e398b07e217a81f8bd49400796f (patch) | |
tree | 6fc307371b6889ac08fa5a7187cde1c137c8d765 | |
parent | e78d01693be38bf93dd6bb49b86e143da450de86 (diff) | |
download | linux-8b955b0dddb35e398b07e217a81f8bd49400796f.tar.xz |
[PATCH] Initial generic hypertransport interrupt support
This patch implements two functions ht_create_irq and ht_destroy_irq for
use by drivers. Several other functions are implemented as helpers for
arch specific irq_chip handlers.
The driver for the card I tested this on isn't yet ready to be merged.
However this code is and hypertransport irqs are in use in a few other
places in the kernel. Not that any of this will get merged before 2.6.19
Because the ipath-ht400 is slightly out of spec this code will need to be
generalized to work there.
I think all of the powerpc uses are for a plain interrupt controller in a
chipset so support for native hypertransport devices is a little less
interesting.
However I think this is a half way decent model on how to separate arch
specific and generic helper code, and I think this is a functional model of
how to get the architecture dependencies out of the msi code.
[akpm@osdl.org: Kconfig fix]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r-- | arch/i386/kernel/io_apic.c | 90 | ||||
-rw-r--r-- | arch/x86_64/kernel/io_apic.c | 96 | ||||
-rw-r--r-- | drivers/pci/Kconfig | 9 | ||||
-rw-r--r-- | drivers/pci/Makefile | 1 | ||||
-rw-r--r-- | drivers/pci/htirq.c | 189 | ||||
-rw-r--r-- | include/asm-i386/hypertransport.h | 42 | ||||
-rw-r--r-- | include/asm-x86_64/hypertransport.h | 42 | ||||
-rw-r--r-- | include/linux/pci.h | 17 |
8 files changed, 486 insertions, 0 deletions
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 03e7606..100406b 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -40,6 +40,7 @@ #include <asm/i8259.h> #include <asm/nmi.h> #include <asm/msidef.h> +#include <asm/hypertransport.h> #include <mach_apic.h> #include <mach_apicdef.h> @@ -2518,6 +2519,95 @@ struct msi_ops arch_msi_ops = { #endif /* CONFIG_PCI_MSI */ +/* + * Hypertransport interrupt support + */ +#ifdef CONFIG_HT_IRQ + +#ifdef CONFIG_SMP + +static void target_ht_irq(unsigned int irq, unsigned int dest) +{ + u32 low, high; + low = read_ht_irq_low(irq); + high = read_ht_irq_high(irq); + + low &= ~(HT_IRQ_LOW_DEST_ID_MASK); + high &= ~(HT_IRQ_HIGH_DEST_ID_MASK); + + low |= HT_IRQ_LOW_DEST_ID(dest); + high |= HT_IRQ_HIGH_DEST_ID(dest); + + write_ht_irq_low(irq, low); + write_ht_irq_high(irq, high); +} + +static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) +{ + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(mask, tmp, CPU_MASK_ALL); + + dest = cpu_mask_to_apicid(mask); + + target_ht_irq(irq, dest); + set_native_irq_info(irq, mask); +} +#endif + +static struct hw_interrupt_type ht_irq_chip = { + .name = "PCI-HT", + .mask = mask_ht_irq, + .unmask = unmask_ht_irq, + .ack = ack_ioapic_irq, +#ifdef CONFIG_SMP + .set_affinity = set_ht_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) +{ + int vector; + + vector = assign_irq_vector(irq); + if (vector >= 0) { + u32 low, high; + unsigned dest; + cpumask_t tmp; + + cpus_clear(tmp); + cpu_set(vector >> 8, tmp); + dest = cpu_mask_to_apicid(tmp); + + high = HT_IRQ_HIGH_DEST_ID(dest); + + low = HT_IRQ_LOW_BASE | + HT_IRQ_LOW_DEST_ID(dest) | + HT_IRQ_LOW_VECTOR(vector) | + ((INT_DEST_MODE == 0) ? + HT_IRQ_LOW_DM_PHYSICAL : + HT_IRQ_LOW_DM_LOGICAL) | + HT_IRQ_LOW_RQEOI_EDGE | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + HT_IRQ_LOW_MT_FIXED : + HT_IRQ_LOW_MT_ARBITRATED) | + HT_IRQ_LOW_IRQ_MASKED; + + write_ht_irq_low(irq, low); + write_ht_irq_high(irq, high); + + set_irq_chip_and_handler(irq, &ht_irq_chip, handle_edge_irq); + } + return vector; +} +#endif /* CONFIG_HT_IRQ */ + /* -------------------------------------------------------------------------- ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 7cc29b5..31c270f 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -43,6 +43,7 @@ #include <asm/dma.h> #include <asm/nmi.h> #include <asm/msidef.h> +#include <asm/hypertransport.h> static int assign_irq_vector(int irq, cpumask_t mask); @@ -1772,6 +1773,101 @@ struct msi_ops arch_msi_ops = { #endif +/* + * Hypertransport interrupt support + */ +#ifdef CONFIG_HT_IRQ + +#ifdef CONFIG_SMP + +static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) +{ + u32 low, high; + low = read_ht_irq_low(irq); + high = read_ht_irq_high(irq); + + low &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); + high &= ~(HT_IRQ_HIGH_DEST_ID_MASK); + + low |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); + high |= HT_IRQ_HIGH_DEST_ID(dest); + + write_ht_irq_low(irq, low); + write_ht_irq_high(irq, high); +} + +static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) +{ + unsigned int dest; + cpumask_t tmp; + int vector; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(mask, tmp, CPU_MASK_ALL); + + vector = assign_irq_vector(irq, mask); + if (vector < 0) + return; + + cpus_clear(tmp); + cpu_set(vector >> 8, tmp); + dest = cpu_mask_to_apicid(tmp); + + target_ht_irq(irq, dest, vector & 0xff); + set_native_irq_info(irq, mask); +} +#endif + +static struct hw_interrupt_type ht_irq_chip = { + .name = "PCI-HT", + .mask = mask_ht_irq, + .unmask = unmask_ht_irq, + .ack = ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = set_ht_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) +{ + int vector; + + vector = assign_irq_vector(irq, TARGET_CPUS); + if (vector >= 0) { + u32 low, high; + unsigned dest; + cpumask_t tmp; + + cpus_clear(tmp); + cpu_set(vector >> 8, tmp); + dest = cpu_mask_to_apicid(tmp); + + high = HT_IRQ_HIGH_DEST_ID(dest); + + low = HT_IRQ_LOW_BASE | + HT_IRQ_LOW_DEST_ID(dest) | + HT_IRQ_LOW_VECTOR(vector) | + ((INT_DEST_MODE == 0) ? + HT_IRQ_LOW_DM_PHYSICAL : + HT_IRQ_LOW_DM_LOGICAL) | + HT_IRQ_LOW_RQEOI_EDGE | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + HT_IRQ_LOW_MT_FIXED : + HT_IRQ_LOW_MT_ARBITRATED); + + write_ht_irq_low(irq, low); + write_ht_irq_high(irq, high); + + set_irq_chip_and_handler(irq, &ht_irq_chip, handle_edge_irq); + } + return vector; +} +#endif /* CONFIG_HT_IRQ */ + /* -------------------------------------------------------------------------- ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index c27e782..0af6d72 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -52,3 +52,12 @@ config PCI_DEBUG When in doubt, say N. +config HT_IRQ + bool "Interrupts on hypertransport devices" + default y + depends on PCI_MSI + depends on X86_LOCAL_APIC && X86_IO_APIC + help + This allows native hypertransport devices to use interrupts. + + If unsure say Y. diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 983d0f8..2752c57 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o obj-$(CONFIG_PPC64) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o +obj-$(CONFIG_HT_IRQ) += htirq.o msiobj-y := msi.o msiobj-$(CONFIG_IA64) += msi-apic.o diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c new file mode 100644 index 0000000..4ba4635 --- /dev/null +++ b/drivers/pci/htirq.c @@ -0,0 +1,189 @@ +/* + * File: htirq.c + * Purpose: Hypertransport Interrupt Capability + * + * Copyright (C) 2006 Linux Networx + * Copyright (C) Eric Biederman <ebiederman@lnxi.com> + */ + +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/gfp.h> + +/* Global ht irq lock. + * + * This is needed to serialize access to the data port in hypertransport + * irq capability. + * + * With multiple simultaneous hypertransport irq devices it might pay + * to make this more fine grained. But start with simple, stupid, and correct. + */ +static DEFINE_SPINLOCK(ht_irq_lock); + +struct ht_irq_cfg { + struct pci_dev *dev; + unsigned pos; + unsigned idx; +}; + +void write_ht_irq_low(unsigned int irq, u32 data) +{ + struct ht_irq_cfg *cfg = get_irq_data(irq); + unsigned long flags; + spin_lock_irqsave(&ht_irq_lock, flags); + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); + pci_write_config_dword(cfg->dev, cfg->pos + 4, data); + spin_unlock_irqrestore(&ht_irq_lock, flags); +} + +void write_ht_irq_high(unsigned int irq, u32 data) +{ + struct ht_irq_cfg *cfg = get_irq_data(irq); + unsigned long flags; + spin_lock_irqsave(&ht_irq_lock, flags); + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); + pci_write_config_dword(cfg->dev, cfg->pos + 4, data); + spin_unlock_irqrestore(&ht_irq_lock, flags); +} + +u32 read_ht_irq_low(unsigned int irq) +{ + struct ht_irq_cfg *cfg = get_irq_data(irq); + unsigned long flags; + u32 data; + spin_lock_irqsave(&ht_irq_lock, flags); + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); + pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); + spin_unlock_irqrestore(&ht_irq_lock, flags); + return data; +} + +u32 read_ht_irq_high(unsigned int irq) +{ + struct ht_irq_cfg *cfg = get_irq_data(irq); + unsigned long flags; + u32 data; + spin_lock_irqsave(&ht_irq_lock, flags); + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); + pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); + spin_unlock_irqrestore(&ht_irq_lock, flags); + return data; +} + +void mask_ht_irq(unsigned int irq) +{ + struct ht_irq_cfg *cfg; + unsigned long flags; + u32 data; + + cfg = get_irq_data(irq); + + spin_lock_irqsave(&ht_irq_lock, flags); + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); + pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); + data |= 1; + pci_write_config_dword(cfg->dev, cfg->pos + 4, data); + spin_unlock_irqrestore(&ht_irq_lock, flags); +} + +void unmask_ht_irq(unsigned int irq) +{ + struct ht_irq_cfg *cfg; + unsigned long flags; + u32 data; + + cfg = get_irq_data(irq); + + spin_lock_irqsave(&ht_irq_lock, flags); + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); + pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); + data &= ~1; + pci_write_config_dword(cfg->dev, cfg->pos + 4, data); + spin_unlock_irqrestore(&ht_irq_lock, flags); +} + +/** + * ht_create_irq - create an irq and attach it to a device. + * @dev: The hypertransport device to find the irq capability on. + * @idx: Which of the possible irqs to attach to. + * + * ht_create_irq is needs to be called for all hypertransport devices + * that generate irqs. + * + * The irq number of the new irq or a negative error value is returned. + */ +int ht_create_irq(struct pci_dev *dev, int idx) +{ + struct ht_irq_cfg *cfg; + unsigned long flags; + u32 data; + int max_irq; + int pos; + int irq; + + pos = pci_find_capability(dev, PCI_CAP_ID_HT); + while (pos) { + u8 subtype; + pci_read_config_byte(dev, pos + 3, &subtype); + if (subtype == HT_CAPTYPE_IRQ) + break; + pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT); + } + if (!pos) + return -EINVAL; + + /* Verify the idx I want to use is in range */ + spin_lock_irqsave(&ht_irq_lock, flags); + pci_write_config_byte(dev, pos + 2, 1); + pci_read_config_dword(dev, pos + 4, &data); + spin_unlock_irqrestore(&ht_irq_lock, flags); + + max_irq = (data >> 16) & 0xff; + if ( idx > max_irq) + return -EINVAL; + + cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + cfg->dev = dev; + cfg->pos = pos; + cfg->idx = 0x10 + (idx * 2); + + irq = create_irq(); + if (irq < 0) { + kfree(cfg); + return -EBUSY; + } + set_irq_data(irq, cfg); + + if (arch_setup_ht_irq(irq, dev) < 0) { + ht_destroy_irq(irq); + return -EBUSY; + } + + return irq; +} + +/** + * ht_destroy_irq - destroy an irq created with ht_create_irq + * + * This reverses ht_create_irq removing the specified irq from + * existence. The irq should be free before this happens. + */ +void ht_destroy_irq(unsigned int irq) +{ + struct ht_irq_cfg *cfg; + + cfg = get_irq_data(irq); + set_irq_chip(irq, NULL); + set_irq_data(irq, NULL); + destroy_irq(irq); + + kfree(cfg); +} + +EXPORT_SYMBOL(ht_create_irq); +EXPORT_SYMBOL(ht_destroy_irq); diff --git a/include/asm-i386/hypertransport.h b/include/asm-i386/hypertransport.h new file mode 100644 index 0000000..c16c6ff --- /dev/null +++ b/include/asm-i386/hypertransport.h @@ -0,0 +1,42 @@ +#ifndef ASM_HYPERTRANSPORT_H +#define ASM_HYPERTRANSPORT_H + +/* + * Constants for x86 Hypertransport Interrupts. + */ + +#define HT_IRQ_LOW_BASE 0xf8000000 + +#define HT_IRQ_LOW_VECTOR_SHIFT 16 +#define HT_IRQ_LOW_VECTOR_MASK 0x00ff0000 +#define HT_IRQ_LOW_VECTOR(v) (((v) << HT_IRQ_LOW_VECTOR_SHIFT) & HT_IRQ_LOW_VECTOR_MASK) + +#define HT_IRQ_LOW_DEST_ID_SHIFT 8 +#define HT_IRQ_LOW_DEST_ID_MASK 0x0000ff00 +#define HT_IRQ_LOW_DEST_ID(v) (((v) << HT_IRQ_LOW_DEST_ID_SHIFT) & HT_IRQ_LOW_DEST_ID_MASK) + +#define HT_IRQ_LOW_DM_PHYSICAL 0x0000000 +#define HT_IRQ_LOW_DM_LOGICAL 0x0000040 + +#define HT_IRQ_LOW_RQEOI_EDGE 0x0000000 +#define HT_IRQ_LOW_RQEOI_LEVEL 0x0000020 + + +#define HT_IRQ_LOW_MT_FIXED 0x0000000 +#define HT_IRQ_LOW_MT_ARBITRATED 0x0000004 +#define HT_IRQ_LOW_MT_SMI 0x0000008 +#define HT_IRQ_LOW_MT_NMI 0x000000c +#define HT_IRQ_LOW_MT_INIT 0x0000010 +#define HT_IRQ_LOW_MT_STARTUP 0x0000014 +#define HT_IRQ_LOW_MT_EXTINT 0x0000018 +#define HT_IRQ_LOW_MT_LINT1 0x000008c +#define HT_IRQ_LOW_MT_LINT0 0x0000098 + +#define HT_IRQ_LOW_IRQ_MASKED 0x0000001 + + +#define HT_IRQ_HIGH_DEST_ID_SHIFT 0 +#define HT_IRQ_HIGH_DEST_ID_MASK 0x00ffffff +#define HT_IRQ_HIGH_DEST_ID(v) ((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK) + +#endif /* ASM_HYPERTRANSPORT_H */ diff --git a/include/asm-x86_64/hypertransport.h b/include/asm-x86_64/hypertransport.h new file mode 100644 index 0000000..c16c6ff --- /dev/null +++ b/include/asm-x86_64/hypertransport.h @@ -0,0 +1,42 @@ +#ifndef ASM_HYPERTRANSPORT_H +#define ASM_HYPERTRANSPORT_H + +/* + * Constants for x86 Hypertransport Interrupts. + */ + +#define HT_IRQ_LOW_BASE 0xf8000000 + +#define HT_IRQ_LOW_VECTOR_SHIFT 16 +#define HT_IRQ_LOW_VECTOR_MASK 0x00ff0000 +#define HT_IRQ_LOW_VECTOR(v) (((v) << HT_IRQ_LOW_VECTOR_SHIFT) & HT_IRQ_LOW_VECTOR_MASK) + +#define HT_IRQ_LOW_DEST_ID_SHIFT 8 +#define HT_IRQ_LOW_DEST_ID_MASK 0x0000ff00 +#define HT_IRQ_LOW_DEST_ID(v) (((v) << HT_IRQ_LOW_DEST_ID_SHIFT) & HT_IRQ_LOW_DEST_ID_MASK) + +#define HT_IRQ_LOW_DM_PHYSICAL 0x0000000 +#define HT_IRQ_LOW_DM_LOGICAL 0x0000040 + +#define HT_IRQ_LOW_RQEOI_EDGE 0x0000000 +#define HT_IRQ_LOW_RQEOI_LEVEL 0x0000020 + + +#define HT_IRQ_LOW_MT_FIXED 0x0000000 +#define HT_IRQ_LOW_MT_ARBITRATED 0x0000004 +#define HT_IRQ_LOW_MT_SMI 0x0000008 +#define HT_IRQ_LOW_MT_NMI 0x000000c +#define HT_IRQ_LOW_MT_INIT 0x0000010 +#define HT_IRQ_LOW_MT_STARTUP 0x0000014 +#define HT_IRQ_LOW_MT_EXTINT 0x0000018 +#define HT_IRQ_LOW_MT_LINT1 0x000008c +#define HT_IRQ_LOW_MT_LINT0 0x0000098 + +#define HT_IRQ_LOW_IRQ_MASKED 0x0000001 + + +#define HT_IRQ_HIGH_DEST_ID_SHIFT 0 +#define HT_IRQ_HIGH_DEST_ID_MASK 0x00ffffff +#define HT_IRQ_HIGH_DEST_ID(v) ((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK) + +#endif /* ASM_HYPERTRANSPORT_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 2aabe90..9b34bc8 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -681,6 +681,23 @@ extern int msi_register(struct msi_ops *ops); #endif +#ifdef CONFIG_HT_IRQ +/* Helper functions.. */ +void write_ht_irq_low(unsigned int irq, u32 data); +void write_ht_irq_high(unsigned int irq, u32 data); +u32 read_ht_irq_low(unsigned int irq); +u32 read_ht_irq_high(unsigned int irq); +void mask_ht_irq(unsigned int irq); +void unmask_ht_irq(unsigned int irq); + +/* The functions a driver should call */ +int ht_create_irq(struct pci_dev *dev, int idx); +void ht_destroy_irq(unsigned int irq); + +/* The arch hook for getting things started */ +int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev); +#endif /* CONFIG_HT_IRQ */ + extern void pci_block_user_cfg_access(struct pci_dev *dev); extern void pci_unblock_user_cfg_access(struct pci_dev *dev); |