diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-04-24 15:45:37 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-04-24 15:45:37 (GMT) |
commit | 8f7544682c488dfc4117b37ed10435bb2d3d8d73 (patch) | |
tree | 075f7404d81e3ff8f8cfa52f09a618e9a13b0a55 | |
parent | 1f91f48b65a075c29c4adc57a895ff0e7306e2ee (diff) | |
parent | 270dac35c26433d06a89150c51e75ca0181ca7e4 (diff) | |
download | linux-8f7544682c488dfc4117b37ed10435bb2d3d8d73.tar.xz |
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: ahci_start_engine compliant to AHCI spec
ata: pata_at91.c bugfix for initial_timing initialisation
ata: pata_at91.c bugfix for high master clock
ahci: AHCI-mode SATA patch for Intel Panther Point DeviceIDs
ata_piix: IDE-mode SATA patch for Intel Panther Point DeviceIDs
libata: Pioneer DVR-216D can't do SETXFER
ahci: don't enable port irq before handler is registered
libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65
libata: Kill unused ATA_DFLAG_{H|D}IPM flags
ahci: EM supported message type sysfs attribute
-rw-r--r-- | drivers/ata/ahci.c | 8 | ||||
-rw-r--r-- | drivers/ata/ahci.h | 4 | ||||
-rw-r--r-- | drivers/ata/ata_piix.c | 8 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 60 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 3 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 6 | ||||
-rw-r--r-- | drivers/ata/pata_at91.c | 22 | ||||
-rw-r--r-- | include/linux/libata.h | 3 |
8 files changed, 103 insertions, 11 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 39d829c..71afe03 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -150,7 +150,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), - .flags = AHCI_FLAG_COMMON, + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, @@ -261,6 +261,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */ { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */ { PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */ + { PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */ + { PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */ + { PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 3986500..12c5282 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -229,6 +229,10 @@ enum { EM_CTL_ALHD = (1 << 26), /* Activity LED */ EM_CTL_XMT = (1 << 25), /* Transmit Only */ EM_CTL_SMB = (1 << 24), /* Single Message Buffer */ + EM_CTL_SGPIO = (1 << 19), /* SGPIO messages supported */ + EM_CTL_SES = (1 << 18), /* SES-2 messages supported */ + EM_CTL_SAFTE = (1 << 17), /* SAF-TE messages supported */ + EM_CTL_LED = (1 << 16), /* LED messages supported */ /* em message type */ EM_MSG_TYPE_LED = (1 << 0), /* LED */ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 0bc3fd6..6f6e771 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -309,6 +309,14 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (PBG) */ { 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ }; diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 26d4523..ff9d832 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -109,6 +109,8 @@ static ssize_t ahci_read_em_buffer(struct device *dev, static ssize_t ahci_store_em_buffer(struct device *dev, struct device_attribute *attr, const char *buf, size_t size); +static ssize_t ahci_show_em_supported(struct device *dev, + struct device_attribute *attr, char *buf); static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); @@ -116,6 +118,7 @@ static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO, ahci_read_em_buffer, ahci_store_em_buffer); +static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL); struct device_attribute *ahci_shost_attrs[] = { &dev_attr_link_power_management_policy, @@ -126,6 +129,7 @@ struct device_attribute *ahci_shost_attrs[] = { &dev_attr_ahci_host_version, &dev_attr_ahci_port_cmd, &dev_attr_em_buffer, + &dev_attr_em_message_supported, NULL }; EXPORT_SYMBOL_GPL(ahci_shost_attrs); @@ -343,6 +347,24 @@ static ssize_t ahci_store_em_buffer(struct device *dev, return size; } +static ssize_t ahci_show_em_supported(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 em_ctl; + + em_ctl = readl(mmio + HOST_EM_CTL); + + return sprintf(buf, "%s%s%s%s\n", + em_ctl & EM_CTL_LED ? "led " : "", + em_ctl & EM_CTL_SAFTE ? "saf-te " : "", + em_ctl & EM_CTL_SES ? "ses-2 " : "", + em_ctl & EM_CTL_SGPIO ? "sgpio " : ""); +} + /** * ahci_save_initial_config - Save and fixup initial config values * @dev: target AHCI device @@ -539,6 +561,27 @@ void ahci_start_engine(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); u32 tmp; + u8 status; + + status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + /* + * At end of section 10.1 of AHCI spec (rev 1.3), it states + * Software shall not set PxCMD.ST to 1 until it is determined + * that a functoinal device is present on the port as determined by + * PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h + * + * Even though most AHCI host controllers work without this check, + * specific controller will fail under this condition + */ + if (status & (ATA_BUSY | ATA_DRQ)) + return; + else { + ahci_scr_read(&ap->link, SCR_STATUS, &tmp); + + if ((tmp & 0xf) != 0x3) + return; + } /* start DMA */ tmp = readl(port_mmio + PORT_CMD); @@ -1897,7 +1940,17 @@ static void ahci_pmp_attach(struct ata_port *ap) ahci_enable_fbs(ap); pp->intr_mask |= PORT_IRQ_BAD_PMP; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + /* + * We must not change the port interrupt mask register if the + * port is marked frozen, the value in pp->intr_mask will be + * restored later when the port is thawed. + * + * Note that during initialization, the port is marked as + * frozen since the irq handler is not yet registered. + */ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); } static void ahci_pmp_detach(struct ata_port *ap) @@ -1913,7 +1966,10 @@ static void ahci_pmp_detach(struct ata_port *ap) writel(cmd, port_mmio + PORT_CMD); pp->intr_mask &= ~PORT_IRQ_BAD_PMP; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + /* see comment above in ahci_pmp_attach() */ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); } int ahci_port_resume(struct ata_port *ap) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 423c0a6..76c3c15 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4139,6 +4139,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { */ { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-216D", "1.08", ATA_HORKAGE_NOSETXFER }, /* End Marker */ { } @@ -5480,7 +5481,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) if (!ap) return NULL; - ap->pflags |= ATA_PFLAG_INITIALIZING; + ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN; ap->lock = &host->lock; ap->print_id = -1; ap->host = host; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 88cd22f..f26f2fe 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3316,6 +3316,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, struct ata_eh_context *ehc = &link->eh_context; struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL; enum ata_lpm_policy old_policy = link->lpm_policy; + bool no_dipm = ap->flags & ATA_FLAG_NO_DIPM; unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM; unsigned int err_mask; int rc; @@ -3332,7 +3333,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, */ ata_for_each_dev(dev, link, ENABLED) { bool hipm = ata_id_has_hipm(dev->id); - bool dipm = ata_id_has_dipm(dev->id); + bool dipm = ata_id_has_dipm(dev->id) && !no_dipm; /* find the first enabled and LPM enabled devices */ if (!link_dev) @@ -3389,7 +3390,8 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, /* host config updated, enable DIPM if transitioning to MIN_POWER */ ata_for_each_dev(dev, link, ENABLED) { - if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) { + if (policy == ATA_LPM_MIN_POWER && !no_dipm && + ata_id_has_dipm(dev->id)) { err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE, SATA_DIPM); if (err_mask && err_mask != AC_ERR_DEV) { diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 0da0dcc..a5fdbdc 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -33,11 +33,12 @@ #define DRV_NAME "pata_at91" -#define DRV_VERSION "0.1" +#define DRV_VERSION "0.2" #define CF_IDE_OFFSET 0x00c00000 #define CF_ALT_IDE_OFFSET 0x00e00000 #define CF_IDE_RES_SIZE 0x08 +#define NCS_RD_PULSE_LIMIT 0x3f /* maximal value for pulse bitfields */ struct at91_ide_info { unsigned long mode; @@ -49,8 +50,18 @@ struct at91_ide_info { void __iomem *alt_addr; }; -static const struct ata_timing initial_timing = - {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; +static const struct ata_timing initial_timing = { + .mode = XFER_PIO_0, + .setup = 70, + .act8b = 290, + .rec8b = 240, + .cyc8b = 600, + .active = 165, + .recover = 150, + .dmack_hold = 0, + .cycle = 600, + .udma = 0 +}; static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz) { @@ -109,6 +120,11 @@ static void set_smc_timing(struct device *dev, /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ ncs_read_setup = 1; ncs_read_pulse = read_cycle - 2; + if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) { + ncs_read_pulse = NCS_RD_PULSE_LIMIT; + dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n", + ncs_read_pulse); + } /* Write timings same as read timings */ write_cycle = read_cycle; diff --git a/include/linux/libata.h b/include/linux/libata.h index 7f675aa..04f32a3 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -137,8 +137,6 @@ enum { ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */ ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */ ATA_DFLAG_AN = (1 << 7), /* AN configured */ - ATA_DFLAG_HIPM = (1 << 8), /* device supports HIPM */ - ATA_DFLAG_DIPM = (1 << 9), /* device supports DIPM */ ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */ ATA_DFLAG_CFG_MASK = (1 << 12) - 1, @@ -198,6 +196,7 @@ enum { * management */ ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity * led */ + ATA_FLAG_NO_DIPM = (1 << 23), /* host not happy with DIPM */ /* bits 24:31 of ap->flags are reserved for LLD specific flags */ |