diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-11-28 02:32:49 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-11-28 02:32:49 (GMT) |
commit | 98e8d2e094de67315f786cd81b1dccb4ac040cc2 (patch) | |
tree | 39e3fe2ac83d2a4c9db53482b6aade94ff06d713 | |
parent | 21f122f47205258e166479e1223898941c6aa6a1 (diff) | |
parent | 070e76cb3ffe43f6855492e77c96680c562598f0 (diff) | |
download | linux-98e8d2e094de67315f786cd81b1dccb4ac040cc2.tar.xz |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull mips fixes from Ralf Baechle:
"The hopefully final round of fixes for 3.18:
- Fix a number of build errors affecting particular configurations.
- Handle EVA correctly when flushing a signal trampoline and dcache
lines.
- Fix printks printing jibberish.
- Handle 64 bit memory addresses correctly when adding memory chunk
on 32 bit kernels.
- Fix a race condition in the hardware tablewalker code"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers
MIPS: Fix address type used for early memory detection.
MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected.
MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASE
MIPS: Netlogic: handle modular AHCI builds
MIPS: Netlogic: handle modular USB case
MIPS: Loongson: Make platform serial setup always built-in.
MIPS: fix EVA & non-SMP non-FPU FP context signal handling
MIPS: cpu-probe: Set the FTLB probability bit on supported cores
MIPS: BMIPS: Fix ".previous without corresponding .section" warnings
MIPS: uaccess.h: Fix strnlen_user comment.
MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line
MIPS: Fix info about plat_setup in arch_mem_init comment
MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.c
MIPS: SEAD3: Fix LED device registration.
MIPS: Fix a copy & paste error in unistd.h
-rw-r--r-- | arch/mips/Kconfig | 14 | ||||
-rw-r--r-- | arch/mips/include/asm/mipsregs.h | 2 | ||||
-rw-r--r-- | arch/mips/include/asm/r4kcache.h | 4 | ||||
-rw-r--r-- | arch/mips/include/asm/uaccess.h | 6 | ||||
-rw-r--r-- | arch/mips/include/uapi/asm/unistd.h | 2 | ||||
-rw-r--r-- | arch/mips/kernel/bmips_vec.S | 3 | ||||
-rw-r--r-- | arch/mips/kernel/cps-vec.S | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cpu-probe.c | 33 | ||||
-rw-r--r-- | arch/mips/kernel/rtlx.c | 4 | ||||
-rw-r--r-- | arch/mips/kernel/setup.c | 4 | ||||
-rw-r--r-- | arch/mips/kernel/signal.c | 8 | ||||
-rw-r--r-- | arch/mips/loongson/common/Makefile | 3 | ||||
-rw-r--r-- | arch/mips/mm/tlbex.c | 10 | ||||
-rw-r--r-- | arch/mips/mti-sead3/sead3-leds.c | 8 | ||||
-rw-r--r-- | arch/mips/netlogic/xlp/Makefile | 12 |
15 files changed, 84 insertions, 31 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f43aa53..9536ef9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2101,9 +2101,17 @@ config 64BIT_PHYS_ADDR config ARCH_PHYS_ADDR_T_64BIT def_bool 64BIT_PHYS_ADDR +choice + prompt "SmartMIPS or microMIPS ASE support" + +config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS + bool "None" + help + Select this if you want neither microMIPS nor SmartMIPS support + config CPU_HAS_SMARTMIPS depends on SYS_SUPPORTS_SMARTMIPS - bool "Support for the SmartMIPS ASE" + bool "SmartMIPS" help SmartMIPS is a extension of the MIPS32 architecture aimed at increased security at both hardware and software level for @@ -2115,11 +2123,13 @@ config CPU_HAS_SMARTMIPS config CPU_MICROMIPS depends on SYS_SUPPORTS_MICROMIPS - bool "Build kernel using microMIPS ISA" + bool "microMIPS" help When this option is enabled the kernel will be built using the microMIPS ISA +endchoice + config CPU_HAS_MSA bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)" depends on CPU_SUPPORTS_MSA diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index b46cd22..22a135a 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -661,6 +661,8 @@ #define MIPS_CONF6_SYND (_ULCAST_(1) << 13) /* proAptiv FTLB on/off bit */ #define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15) +/* FTLB probability bits */ +#define MIPS_CONF6_FTLBP_SHIFT (16) #define MIPS_CONF7_WII (_ULCAST_(1) << 31) diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h index 4520adc..cd6e0af 100644 --- a/arch/mips/include/asm/r4kcache.h +++ b/arch/mips/include/asm/r4kcache.h @@ -257,7 +257,11 @@ static inline void protected_flush_icache_line(unsigned long addr) */ static inline void protected_writeback_dcache_line(unsigned long addr) { +#ifdef CONFIG_EVA + protected_cachee_op(Hit_Writeback_Inv_D, addr); +#else protected_cache_op(Hit_Writeback_Inv_D, addr); +#endif } static inline void protected_writeback_scache_line(unsigned long addr) diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 133678a..22a5624 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -1422,7 +1422,7 @@ static inline long __strnlen_user(const char __user *s, long n) } /* - * strlen_user: - Get the size of a string in user space. + * strnlen_user: - Get the size of a string in user space. * @str: The string to measure. * * Context: User context only. This function may sleep. @@ -1431,9 +1431,7 @@ static inline long __strnlen_user(const char __user *s, long n) * * Returns the size of the string INCLUDING the terminating NUL. * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. + * If the string is too long, returns a value greater than @n. */ static inline long strnlen_user(const char __user *s, long n) { diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 9dc5856..d001bb1 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -1045,7 +1045,7 @@ #define __NR_seccomp (__NR_Linux + 316) #define __NR_getrandom (__NR_Linux + 317) #define __NR_memfd_create (__NR_Linux + 318) -#define __NR_memfd_create (__NR_Linux + 319) +#define __NR_bpf (__NR_Linux + 319) /* * Offset of the last N32 flavoured syscall diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S index 290c23b..8649507 100644 --- a/arch/mips/kernel/bmips_vec.S +++ b/arch/mips/kernel/bmips_vec.S @@ -208,7 +208,6 @@ bmips_reset_nmi_vec_end: END(bmips_reset_nmi_vec) .set pop - .previous /*********************************************************************** * CPU1 warm restart vector (used for second and subsequent boots). @@ -281,5 +280,3 @@ LEAF(bmips_enable_xks01) jr ra END(bmips_enable_xks01) - - .previous diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index e6e97d2..0384b05 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -229,6 +229,7 @@ LEAF(mips_cps_core_init) nop .set push + .set mips32r2 .set mt /* Only allow 1 TC per VPE to execute... */ @@ -345,6 +346,7 @@ LEAF(mips_cps_boot_vpes) nop .set push + .set mips32r2 .set mt 1: /* Enter VPE configuration state */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index d5a4f38..dc49cf3 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -193,6 +193,32 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa) static char unknown_isa[] = KERN_ERR \ "Unsupported ISA type, c0.config0: %d."; +static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c) +{ + + unsigned int probability = c->tlbsize / c->tlbsizevtlb; + + /* + * 0 = All TLBWR instructions go to FTLB + * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the + * FTLB and 1 goes to the VTLB. + * 2 = 7:1: As above with 7:1 ratio. + * 3 = 3:1: As above with 3:1 ratio. + * + * Use the linear midpoint as the probability threshold. + */ + if (probability >= 12) + return 1; + else if (probability >= 6) + return 2; + else + /* + * So FTLB is less than 4 times bigger than VTLB. + * A 3:1 ratio can still be useful though. + */ + return 3; +} + static void set_ftlb_enable(struct cpuinfo_mips *c, int enable) { unsigned int config6; @@ -203,9 +229,14 @@ static void set_ftlb_enable(struct cpuinfo_mips *c, int enable) case CPU_P5600: /* proAptiv & related cores use Config6 to enable the FTLB */ config6 = read_c0_config6(); + /* Clear the old probability value */ + config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT); if (enable) /* Enable FTLB */ - write_c0_config6(config6 | MIPS_CONF6_FTLBEN); + write_c0_config6(config6 | + (calculate_ftlb_probability(c) + << MIPS_CONF6_FTLBP_SHIFT) + | MIPS_CONF6_FTLBEN); else /* Disable FTLB */ write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN); diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 31b1b76..c5c4fd5 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -94,12 +94,12 @@ int rtlx_open(int index, int can_sleep) int ret = 0; if (index >= RTLX_CHANNELS) { - pr_debug(KERN_DEBUG "rtlx_open index out of range\n"); + pr_debug("rtlx_open index out of range\n"); return -ENOSYS; } if (atomic_inc_return(&channel_wqs[index].in_open) > 1) { - pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index); + pr_debug("rtlx_open channel %d already opened\n", index); ret = -EBUSY; goto out_fail; } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index d21ec57..f3b635f 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -485,7 +485,7 @@ static void __init bootmem_init(void) * NOTE: historically plat_mem_setup did the entire platform initialization. * This was rather impractical because it meant plat_mem_setup had to * get away without any kind of memory allocator. To keep old code from - * breaking plat_setup was just renamed to plat_setup and a second platform + * breaking plat_setup was just renamed to plat_mem_setup and a second platform * initialization hook for anything else was introduced. */ @@ -493,7 +493,7 @@ static int usermem __initdata; static int __init early_parse_mem(char *p) { - unsigned long start, size; + phys_t start, size; /* * If a user specifies memory size, we diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 1d57605..16f1e4f 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -658,13 +658,13 @@ static int signal_setup(void) save_fp_context = _save_fp_context; restore_fp_context = _restore_fp_context; } else { - save_fp_context = copy_fp_from_sigcontext; - restore_fp_context = copy_fp_to_sigcontext; + save_fp_context = copy_fp_to_sigcontext; + restore_fp_context = copy_fp_from_sigcontext; } #endif /* CONFIG_SMP */ #else - save_fp_context = copy_fp_from_sigcontext;; - restore_fp_context = copy_fp_to_sigcontext; + save_fp_context = copy_fp_to_sigcontext; + restore_fp_context = copy_fp_from_sigcontext; #endif return 0; diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 0bb9cc9..d87e033 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o # Serial port support # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_SERIAL_8250) += serial.o +loongson-serial-$(CONFIG_SERIAL_8250) := serial.o +obj-y += $(loongson-serial-m) $(loongson-serial-y) obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index b5f228e..e3328a9 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -1872,8 +1872,16 @@ build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l, uasm_l_smp_pgtable_change(l, *p); #endif iPTE_LW(p, wr.r1, wr.r2); /* get even pte */ - if (!m4kc_tlbp_war()) + if (!m4kc_tlbp_war()) { build_tlb_probe_entry(p); + if (cpu_has_htw) { + /* race condition happens, leaving */ + uasm_i_ehb(p); + uasm_i_mfc0(p, wr.r3, C0_INDEX); + uasm_il_bltz(p, r, wr.r3, label_leave); + uasm_i_nop(p); + } + } return wr; } diff --git a/arch/mips/mti-sead3/sead3-leds.c b/arch/mips/mti-sead3/sead3-leds.c index 20102a6..c427c57 100644 --- a/arch/mips/mti-sead3/sead3-leds.c +++ b/arch/mips/mti-sead3/sead3-leds.c @@ -5,7 +5,7 @@ * * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. */ -#include <linux/module.h> +#include <linux/init.h> #include <linux/leds.h> #include <linux/platform_device.h> @@ -76,8 +76,4 @@ static int __init led_init(void) return platform_device_register(&fled_device); } -module_init(led_init); - -MODULE_AUTHOR("Chris Dearman <chris@mips.com>"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("LED probe driver for SEAD-3"); +device_initcall(led_init); diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile index be358a8..6b43af0 100644 --- a/arch/mips/netlogic/xlp/Makefile +++ b/arch/mips/netlogic/xlp/Makefile @@ -1,6 +1,10 @@ obj-y += setup.o nlm_hal.o cop2-ex.o dt.o obj-$(CONFIG_SMP) += wakeup.o -obj-$(CONFIG_USB) += usb-init.o -obj-$(CONFIG_USB) += usb-init-xlp2.o -obj-$(CONFIG_SATA_AHCI) += ahci-init.o -obj-$(CONFIG_SATA_AHCI) += ahci-init-xlp2.o +ifdef CONFIG_USB +obj-y += usb-init.o +obj-y += usb-init-xlp2.o +endif +ifdef CONFIG_SATA_AHCI +obj-y += ahci-init.o +obj-y += ahci-init-xlp2.o +endif |