summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBen Hutchings <bhutchings@solarflare.com>2012-02-29 14:26:22 (GMT)
committerDavid S. Miller <davem@davemloft.net>2012-03-01 21:41:26 (GMT)
commit9c4df53bc3f9c72d7f1f1226927f456d46412381 (patch)
tree93bc7536bcf1cac679fc150d0cd88b9e21e5ed17
parent9c717758c9289331e22c88ef69d8c248def9cd29 (diff)
downloadlinux-9c4df53bc3f9c72d7f1f1226927f456d46412381.tar.xz
ethtool, mdio, mii: Specify MDIO information fields in struct ethtool_cmd
Add comments for ethtool_cmd::phy_address and ethtool_cmd::mdio_support, and definitions of the flags currently used in mdio_support. In the mdio library, assert that its own flags continue to match those in the ethtool interface. In the mii library, use the ethtool flag definition and stop including <linux/mdio.h>. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/mdio.c3
-rw-r--r--drivers/net/mii.c4
-rw-r--r--include/linux/ethtool.h23
3 files changed, 26 insertions, 4 deletions
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index 16fbb11..8403316 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -190,6 +190,9 @@ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
int reg;
u32 speed;
+ BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22);
+ BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45);
+
ecmd->transceiver = XCVR_INTERNAL;
ecmd->phy_address = mdio->prtad;
ecmd->mdio_support =
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index c70c233..4a99c39 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -31,7 +31,7 @@
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
-#include <linux/mdio.h>
+#include <linux/mii.h>
static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
{
@@ -74,7 +74,7 @@ int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
/* this isn't fully supported at higher layers */
ecmd->phy_address = mii->phy_id;
- ecmd->mdio_support = MDIO_SUPPORTS_C22;
+ ecmd->mdio_support = ETH_MDIO_SUPPORTS_C22;
ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index da5b2de..e1d9e0e 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -30,10 +30,15 @@ struct ethtool_cmd {
* access it */
__u8 duplex; /* Duplex, half or full */
__u8 port; /* Which connector port */
- __u8 phy_address;
+ __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45).
+ * May be read-only or read-write
+ * depending on the driver.
+ */
__u8 transceiver; /* Which transceiver to use */
__u8 autoneg; /* Enable or disable autonegotiation */
- __u8 mdio_support;
+ __u8 mdio_support; /* MDIO protocols supported. Read-only.
+ * Not set by all drivers.
+ */
__u32 maxtxpkt; /* Tx pkts before generating tx int */
__u32 maxrxpkt; /* Rx pkts before generating rx int */
__u16 speed_hi; /* The forced speed (upper
@@ -59,6 +64,20 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
return (ep->speed_hi << 16) | ep->speed;
}
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>. This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22 1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45 2
+
#define ETHTOOL_FWVERS_LEN 32
#define ETHTOOL_BUSINFO_LEN 32
/* these strings are set to whatever the driver author decides... */