diff options
author | John Garry <john.garry@huawei.com> | 2016-09-06 15:36:25 (GMT) |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2016-09-14 16:54:18 (GMT) |
commit | 9c81e2cf7b9f4f0a806abb8d59736246b1b79708 (patch) | |
tree | 69d7bc84cab8c009f2c0f62eb1fdf3a790c9f99d | |
parent | 56cc74b9999ff0059007626ef8fab031033a166b (diff) | |
download | linux-9c81e2cf7b9f4f0a806abb8d59736246b1b79708.tar.xz |
scsi: hisi_sas: send three identify before phy up
When the v2 hw is attached with many disks through an expander, there
may be OOB reset resulting in a PHY going down after the speed is
negotiated (very low probability).
This issue is resolved by modifying the link control registers to send
three identify frames before the PHY is ready (according to 6.10.3.3.2
in SAS 3.0 spec) and close ready when the PHY is down.
Signed-off-by: NengLong Zhao <zhaonenglong@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-rw-r--r-- | drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 20 |
1 files changed, 16 insertions, 4 deletions
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 735ebff..9825a3f 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -117,6 +117,8 @@ #define SL_CONTROL (PORT_BASE + 0x94) #define SL_CONTROL_NOTIFY_EN_OFF 0 #define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF) +#define SL_CONTROL_CTA_OFF 17 +#define SL_CONTROL_CTA_MSK (0x1 << SL_CONTROL_CTA_OFF) #define TX_ID_DWORD0 (PORT_BASE + 0x9c) #define TX_ID_DWORD1 (PORT_BASE + 0xa0) #define TX_ID_DWORD2 (PORT_BASE + 0xa4) @@ -124,6 +126,9 @@ #define TX_ID_DWORD4 (PORT_BASE + 0xaC) #define TX_ID_DWORD5 (PORT_BASE + 0xb0) #define TX_ID_DWORD6 (PORT_BASE + 0xb4) +#define TXID_AUTO (PORT_BASE + 0xb8) +#define TXID_AUTO_CT3_OFF 1 +#define TXID_AUTO_CT3_MSK (0x1 << TXID_AUTO_CT3_OFF) #define RX_IDAF_DWORD0 (PORT_BASE + 0xc4) #define RX_IDAF_DWORD1 (PORT_BASE + 0xc8) #define RX_IDAF_DWORD2 (PORT_BASE + 0xcc) @@ -814,6 +819,8 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba) hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855); hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, 0x30b9908); hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d); + hisi_sas_phy_write32(hisi_hba, i, SL_CONTROL, 0x0); + hisi_sas_phy_write32(hisi_hba, i, TXID_AUTO, 0x2); hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x10); hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff); hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff); @@ -1901,16 +1908,21 @@ end: static int phy_down_v2_hw(int phy_no, struct hisi_hba *hisi_hba) { int res = 0; - u32 phy_cfg, phy_state; + u32 phy_state, sl_ctrl, txid_auto; hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 1); - phy_cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG); - phy_state = hisi_sas_read32(hisi_hba, PHY_STATE); - hisi_sas_phy_down(hisi_hba, phy_no, (phy_state & 1 << phy_no) ? 1 : 0); + sl_ctrl = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL); + hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, + sl_ctrl & ~SL_CONTROL_CTA_MSK); + + txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO); + hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO, + txid_auto | TXID_AUTO_CT3_MSK); + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK); hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0); |