diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-09-11 05:58:14 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-09-11 05:58:14 (GMT) |
commit | a22a0fdba4191473581f86c9dd5361cf581521d3 (patch) | |
tree | ef5d3992f791641d6c8c16cee781f214fecbb105 | |
parent | bf83e61464803d386d0ec3fc92e5449d7963a409 (diff) | |
parent | db15e6312efd537e2deb2cbad110c23f98704a3c (diff) | |
download | linux-a22a0fdba4191473581f86c9dd5361cf581521d3.tar.xz |
Merge tag 'for-v3.12' of git://git.infradead.org/battery-2.6
Pull battery/power supply driver updates from Anton Vorontsov:
"New drivers:
- APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM).
- Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora).
- Texas Instruments BQ24190 charger driver by Mark A. Greer (Animal
Creek Technologies).
- Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and
Marek Belisko (Golden Delicious Computers). The driver is used on
Freerunner GTA04 phones.
Highlighted fixes and improvements:
- Suspend/wakeup logic improvements: power supply objects will block
system suspend until all power supply events are processed. Thanks
to Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google)"
* tag 'for-v3.12' of git://git.infradead.org/battery-2.6:
rx51_battery: Fix channel number when reading adc value
power: Add twl4030_madc battery driver.
bq24190_charger: Workaround SS definition problem on i386 builds
power_supply: Prevent suspend until power supply events are processed
vexpress-poweroff: Should depend on the required infrastructure
twl4030-charger: Fix compiler warning with regulator_enable()
rx51_battery: Replace hardcoded channels values.
bq24190_charger: Add support for TI BQ24190 Battery Charger
ab8500-charger: We print an unintended error message
max8925_power: Fix missing of_node_put
power_supply: Replace strict_strtol() with kstrtol()
power: Add APM X-Gene system reboot driver
power_supply: tosa_battery: Get rid of irq_to_gpio usage
power supply: collie_battery: Convert to use dev_pm_ops
power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST
power: reset: Add msm restart support
MAINTAINERS: drivers/power: add entry for SmartReflex AVS drivers
-rw-r--r-- | Documentation/devicetree/bindings/power_supply/msm-poweroff.txt | 17 | ||||
-rw-r--r-- | MAINTAINERS | 8 | ||||
-rw-r--r-- | drivers/power/Kconfig | 15 | ||||
-rw-r--r-- | drivers/power/Makefile | 2 | ||||
-rw-r--r-- | drivers/power/ab8500_charger.c | 1 | ||||
-rw-r--r-- | drivers/power/bq24190_charger.c | 1549 | ||||
-rw-r--r-- | drivers/power/collie_battery.c | 2 | ||||
-rw-r--r-- | drivers/power/max8925_power.c | 1 | ||||
-rw-r--r-- | drivers/power/power_supply_core.c | 38 | ||||
-rw-r--r-- | drivers/power/power_supply_sysfs.c | 2 | ||||
-rw-r--r-- | drivers/power/reset/Kconfig | 15 | ||||
-rw-r--r-- | drivers/power/reset/Makefile | 2 | ||||
-rw-r--r-- | drivers/power/reset/msm-poweroff.c | 73 | ||||
-rw-r--r-- | drivers/power/reset/xgene-reboot.c | 103 | ||||
-rw-r--r-- | drivers/power/rx51_battery.c | 14 | ||||
-rw-r--r-- | drivers/power/tosa_battery.c | 2 | ||||
-rw-r--r-- | drivers/power/twl4030_charger.c | 7 | ||||
-rw-r--r-- | drivers/power/twl4030_madc_battery.c | 245 | ||||
-rw-r--r-- | include/linux/power/bq24190_charger.h | 16 | ||||
-rw-r--r-- | include/linux/power/twl4030_madc_battery.h | 39 | ||||
-rw-r--r-- | include/linux/power_supply.h | 3 |
21 files changed, 2137 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/power_supply/msm-poweroff.txt b/Documentation/devicetree/bindings/power_supply/msm-poweroff.txt new file mode 100644 index 0000000..ce44ad3 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/msm-poweroff.txt @@ -0,0 +1,17 @@ +MSM Restart Driver + +A power supply hold (ps-hold) bit is set to power the msm chipsets. +Clearing that bit allows us to restart/poweroff. The difference +between poweroff and restart is determined by unique power manager IC +settings. + +Required Properties: +-compatible: "qcom,pshold" +-reg: Specifies the physical address of the ps-hold register + +Example: + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 38a37f7..d721af1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7624,6 +7624,14 @@ S: Maintained F: Documentation/security/Smack.txt F: security/smack/ +SMARTREFLEX DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS) +M: Kevin Hilman <khilman@kernel.org> +M: Nishanth Menon <nm@ti.com> +S: Maintained +F: drivers/power/avs/smartreflex.c +F: include/linux/power/smartreflex.h +L: linux-pm@vger.kernel.org + SMC91x ETHERNET DRIVER M: Nicolas Pitre <nico@fluxnic.net> S: Odd Fixes diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 7b8979c..bb49ab6 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -216,6 +216,13 @@ config BATTERY_S3C_ADC help Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery +config BATTERY_TWL4030_MADC + tristate "TWL4030 MADC battery driver" + depends on TWL4030_MADC + help + Say Y here to enable this dumb driver for batteries managed + through the TWL4030 MADC. + config CHARGER_88PM860X tristate "Marvell 88PM860x Charger driver" depends on MFD_88PM860X && BATTERY_88PM860X @@ -334,6 +341,12 @@ config CHARGER_BQ2415X You'll need this driver to charge batteries on e.g. Nokia RX-51/N900. +config CHARGER_BQ24190 + tristate "TI BQ24190 battery charger driver" + depends on I2C && GPIOLIB + help + Say Y to enable support for the TI BQ24190 battery charger. + config CHARGER_SMB347 tristate "Summit Microelectronics SMB347 Battery Charger" depends on I2C @@ -357,7 +370,7 @@ config AB8500_BM config BATTERY_GOLDFISH tristate "Goldfish battery driver" - depends on GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS && (GOLDFISH || COMPILE_TEST) help Say Y to enable support for the battery and AC power in the Goldfish emulator. diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 653bf6c..a4b7417 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o obj-$(CONFIG_BATTERY_Z2) += z2_battery.o obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o +obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o @@ -50,6 +51,7 @@ obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o +obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index f098fda..a4c4a10 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -774,6 +774,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, di->max_usb_in_curr.usb_type_max); + break; case USB_STAT_NOT_VALID_LINK: dev_err(di->dev, "USB Type invalid - try charging anyway\n"); di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; diff --git a/drivers/power/bq24190_charger.c b/drivers/power/bq24190_charger.c new file mode 100644 index 0000000..ad3ff8f --- /dev/null +++ b/drivers/power/bq24190_charger.c @@ -0,0 +1,1549 @@ +/* + * Driver for the TI bq24190 battery charger. + * + * Author: Mark A. Greer <mgreer@animalcreek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/of_irq.h> +#include <linux/of_device.h> +#include <linux/pm_runtime.h> +#include <linux/power_supply.h> +#include <linux/gpio.h> +#include <linux/i2c.h> + +#include <linux/power/bq24190_charger.h> + + +#define BQ24190_MANUFACTURER "Texas Instruments" + +#define BQ24190_REG_ISC 0x00 /* Input Source Control */ +#define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7) +#define BQ24190_REG_ISC_EN_HIZ_SHIFT 7 +#define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \ + BIT(3)) +#define BQ24190_REG_ISC_VINDPM_SHIFT 3 +#define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0)) +#define BQ24190_REG_ISC_IINLIM_SHIFT 0 + +#define BQ24190_REG_POC 0x01 /* Power-On Configuration */ +#define BQ24190_REG_POC_RESET_MASK BIT(7) +#define BQ24190_REG_POC_RESET_SHIFT 7 +#define BQ24190_REG_POC_WDT_RESET_MASK BIT(6) +#define BQ24190_REG_POC_WDT_RESET_SHIFT 6 +#define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4 +#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1)) +#define BQ24190_REG_POC_SYS_MIN_SHIFT 1 +#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0) +#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0 + +#define BQ24190_REG_CCC 0x02 /* Charge Current Control */ +#define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ + BIT(4) | BIT(3) | BIT(2)) +#define BQ24190_REG_CCC_ICHG_SHIFT 2 +#define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0) +#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0 + +#define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */ +#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ + BIT(4)) +#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4 +#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \ + BIT(0)) +#define BQ24190_REG_PCTCC_ITERM_SHIFT 0 + +#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */ +#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \ + BIT(4) | BIT(3) | BIT(2)) +#define BQ24190_REG_CVC_VREG_SHIFT 2 +#define BQ24190_REG_CVC_BATLOWV_MASK BIT(1) +#define BQ24190_REG_CVC_BATLOWV_SHIFT 1 +#define BQ24190_REG_CVC_VRECHG_MASK BIT(0) +#define BQ24190_REG_CVC_VRECHG_SHIFT 0 + +#define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */ +#define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7) +#define BQ24190_REG_CTTC_EN_TERM_SHIFT 7 +#define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6) +#define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6 +#define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4 +#define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3) +#define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3 +#define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1)) +#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1 +#define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0) +#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0 + +#define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */ +#define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5)) +#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5 +#define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2 +#define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0)) +#define BQ24190_REG_ICTRC_TREG_SHIFT 0 + +#define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */ +#define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7) +#define BQ24190_REG_MOC_DPDM_EN_SHIFT 7 +#define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6) +#define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6 +#define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5) +#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5 +#define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4) +#define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4 +#define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0)) +#define BQ24190_REG_MOC_INT_MASK_SHIFT 0 + +#define BQ24190_REG_SS 0x08 /* System Status */ +#define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6)) +#define BQ24190_REG_SS_VBUS_STAT_SHIFT 6 +#define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_SS_CHRG_STAT_SHIFT 4 +#define BQ24190_REG_SS_DPM_STAT_MASK BIT(3) +#define BQ24190_REG_SS_DPM_STAT_SHIFT 3 +#define BQ24190_REG_SS_PG_STAT_MASK BIT(2) +#define BQ24190_REG_SS_PG_STAT_SHIFT 2 +#define BQ24190_REG_SS_THERM_STAT_MASK BIT(1) +#define BQ24190_REG_SS_THERM_STAT_SHIFT 1 +#define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0) +#define BQ24190_REG_SS_VSYS_STAT_SHIFT 0 + +#define BQ24190_REG_F 0x09 /* Fault */ +#define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7) +#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7 +#define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6) +#define BQ24190_REG_F_BOOST_FAULT_SHIFT 6 +#define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_F_CHRG_FAULT_SHIFT 4 +#define BQ24190_REG_F_BAT_FAULT_MASK BIT(3) +#define BQ24190_REG_F_BAT_FAULT_SHIFT 3 +#define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0)) +#define BQ24190_REG_F_NTC_FAULT_SHIFT 0 + +#define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */ +#define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3)) +#define BQ24190_REG_VPRS_PN_SHIFT 3 +#define BQ24190_REG_VPRS_PN_24190 0x4 +#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193 */ +#define BQ24190_REG_VPRS_PN_24192I 0x3 +#define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2) +#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2 +#define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0)) +#define BQ24190_REG_VPRS_DEV_REG_SHIFT 0 + +/* + * The FAULT register is latched by the bq24190 (except for NTC_FAULT) + * so the first read after a fault returns the latched value and subsequent + * reads return the current value. In order to return the fault status + * to the user, have the interrupt handler save the reg's value and retrieve + * it in the appropriate health/status routine. Each routine has its own + * flag indicating whether it should use the value stored by the last run + * of the interrupt handler or do an actual reg read. That way each routine + * can report back whatever fault may have occured. + */ +struct bq24190_dev_info { + struct i2c_client *client; + struct device *dev; + struct power_supply charger; + struct power_supply battery; + char model_name[I2C_NAME_SIZE]; + kernel_ulong_t model; + unsigned int gpio_int; + unsigned int irq; + struct mutex f_reg_lock; + bool first_time; + bool charger_health_valid; + bool battery_health_valid; + bool battery_status_valid; + u8 f_reg; + u8 ss_reg; + u8 watchdog; +}; + +/* + * The tables below provide a 2-way mapping for the value that goes in + * the register field and the real-world value that it represents. + * The index of the array is the value that goes in the register; the + * number at that index in the array is the real-world value that it + * represents. + */ +/* REG02[7:2] (ICHG) in uAh */ +static const int bq24190_ccc_ichg_values[] = { + 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000, + 1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000, + 1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000, + 2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000, + 2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000, + 3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000, + 3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000, + 4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000 +}; + +/* REG04[7:2] (VREG) in uV */ +static const int bq24190_cvc_vreg_values[] = { + 3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000, + 3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000, + 3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000, + 3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000, + 4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000, + 4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000, + 4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000, + 4400000 +}; + +/* REG06[1:0] (TREG) in tenths of degrees Celcius */ +static const int bq24190_ictrc_treg_values[] = { + 600, 800, 1000, 1200 +}; + +/* + * Return the index in 'tbl' of greatest value that is less than or equal to + * 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that + * the values in 'tbl' are sorted from smallest to largest and 'tbl_size' + * is less than 2^8. + */ +static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v) +{ + int i; + + for (i = 1; i < tbl_size; i++) + if (v < tbl[i]) + break; + + return i - 1; +} + +/* Basic driver I/O routines */ + +static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data) +{ + int ret; + + ret = i2c_smbus_read_byte_data(bdi->client, reg); + if (ret < 0) + return ret; + + *data = ret; + return 0; +} + +static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data) +{ + return i2c_smbus_write_byte_data(bdi->client, reg, data); +} + +static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg, + u8 mask, u8 shift, u8 *data) +{ + u8 v; + int ret; + + ret = bq24190_read(bdi, reg, &v); + if (ret < 0) + return ret; + + v &= mask; + v >>= shift; + *data = v; + + return 0; +} + +static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg, + u8 mask, u8 shift, u8 data) +{ + u8 v; + int ret; + + ret = bq24190_read(bdi, reg, &v); + if (ret < 0) + return ret; + + v &= ~mask; + v |= ((data << shift) & mask); + + return bq24190_write(bdi, reg, v); +} + +static int bq24190_get_field_val(struct bq24190_dev_info *bdi, + u8 reg, u8 mask, u8 shift, + const int tbl[], int tbl_size, + int *val) +{ + u8 v; + int ret; + + ret = bq24190_read_mask(bdi, reg, mask, shift, &v); + if (ret < 0) + return ret; + + v = (v >= tbl_size) ? (tbl_size - 1) : v; + *val = tbl[v]; + + return 0; +} + +static int bq24190_set_field_val(struct bq24190_dev_info *bdi, + u8 reg, u8 mask, u8 shift, + const int tbl[], int tbl_size, + int val) +{ + u8 idx; + + idx = bq24190_find_idx(tbl, tbl_size, val); + + return bq24190_write_mask(bdi, reg, mask, shift, idx); +} + +#ifdef CONFIG_SYSFS +/* + * There are a numerous options that are configurable on the bq24190 + * that go well beyond what the power_supply properties provide access to. + * Provide sysfs access to them so they can be examined and possibly modified + * on the fly. They will be provided for the charger power_supply object only + * and will be prefixed by 'f_' to make them easier to recognize. + */ + +#define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \ +{ \ + .attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \ + .reg = BQ24190_REG_##r, \ + .mask = BQ24190_REG_##r##_##f##_MASK, \ + .shift = BQ24190_REG_##r##_##f##_SHIFT, \ +} + +#define BQ24190_SYSFS_FIELD_RW(_name, r, f) \ + BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \ + bq24190_sysfs_store) + +#define BQ24190_SYSFS_FIELD_RO(_name, r, f) \ + BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL) + +static ssize_t bq24190_sysfs_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t bq24190_sysfs_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count); + +struct bq24190_sysfs_field_info { + struct device_attribute attr; + u8 reg; + u8 mask; + u8 shift; +}; + +/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */ +#undef SS + +static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = { + /* sysfs name reg field in reg */ + BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ), + BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM), + BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM), + BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG), + BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN), + BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM), + BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG), + BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT), + BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG), + BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM), + BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG), + BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV), + BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG), + BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM), + BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT), + BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG), + BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER), + BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER), + BQ24190_SYSFS_FIELD_RW(jeta_iset, CTTC, JEITA_ISET), + BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP), + BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP), + BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG), + BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN), + BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN), + BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE), + BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET), + BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK), + BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT), + BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT), + BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT), + BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT), + BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT), + BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT), + BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT), + BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT), + BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT), + BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT), + BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT), + BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN), + BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE), + BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG), +}; + +static struct attribute * + bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1]; + +static const struct attribute_group bq24190_sysfs_attr_group = { + .attrs = bq24190_sysfs_attrs, +}; + +static void bq24190_sysfs_init_attrs(void) +{ + int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); + + for (i = 0; i < limit; i++) + bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr; + + bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */ +} + +static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup( + const char *name) +{ + int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); + + for (i = 0; i < limit; i++) + if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name)) + break; + + if (i >= limit) + return NULL; + + return &bq24190_sysfs_field_tbl[i]; +} + +static ssize_t bq24190_sysfs_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + struct bq24190_sysfs_field_info *info; + int ret; + u8 v; + + info = bq24190_sysfs_field_lookup(attr->attr.name); + if (!info) + return -EINVAL; + + ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%hhx\n", v); +} + +static ssize_t bq24190_sysfs_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + struct bq24190_sysfs_field_info *info; + int ret; + u8 v; + + info = bq24190_sysfs_field_lookup(attr->attr.name); + if (!info) + return -EINVAL; + + ret = kstrtou8(buf, 0, &v); + if (ret < 0) + return ret; + + ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v); + if (ret) + return ret; + + return count; +} + +static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi) +{ + bq24190_sysfs_init_attrs(); + + return sysfs_create_group(&bdi->charger.dev->kobj, + &bq24190_sysfs_attr_group); +} + +static void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) +{ + sysfs_remove_group(&bdi->charger.dev->kobj, &bq24190_sysfs_attr_group); +} +#else +static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi) +{ + return 0; +} + +static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {} +#endif + +/* + * According to the "Host Mode and default Mode" section of the + * manual, a write to any register causes the bq24190 to switch + * from default mode to host mode. It will switch back to default + * mode after a WDT timeout unless the WDT is turned off as well. + * So, by simply turning off the WDT, we accomplish both with the + * same write. + */ +static int bq24190_set_mode_host(struct bq24190_dev_info *bdi) +{ + int ret; + u8 v; + + ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v); + if (ret < 0) + return ret; + + bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >> + BQ24190_REG_CTTC_WATCHDOG_SHIFT); + v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK; + + return bq24190_write(bdi, BQ24190_REG_CTTC, v); +} + +static int bq24190_register_reset(struct bq24190_dev_info *bdi) +{ + int ret, limit = 100; + u8 v; + + /* Reset the registers */ + ret = bq24190_write_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_RESET_MASK, + BQ24190_REG_POC_RESET_SHIFT, + 0x1); + if (ret < 0) + return ret; + + /* Reset bit will be cleared by hardware so poll until it is */ + do { + ret = bq24190_read_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_RESET_MASK, + BQ24190_REG_POC_RESET_SHIFT, + &v); + if (ret < 0) + return ret; + + if (!v) + break; + + udelay(10); + } while (--limit); + + if (!limit) + return -EIO; + + return 0; +} + +/* Charger power supply property routines */ + +static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int type, ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_CHG_CONFIG_MASK, + BQ24190_REG_POC_CHG_CONFIG_SHIFT, + &v); + if (ret < 0) + return ret; + + /* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */ + if (!v) { + type = POWER_SUPPLY_CHARGE_TYPE_NONE; + } else { + ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, + &v); + if (ret < 0) + return ret; + + type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE : + POWER_SUPPLY_CHARGE_TYPE_FAST; + } + + val->intval = type; + + return 0; +} + +static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + u8 chg_config, force_20pct, en_term; + int ret; + + /* + * According to the "Termination when REG02[0] = 1" section of + * the bq24190 manual, the trickle charge could be less than the + * termination current so it recommends turning off the termination + * function. + * + * Note: AFAICT from the datasheet, the user will have to manually + * turn off the charging when in 20% mode. If its not turned off, + * there could be battery damage. So, use this mode at your own risk. + */ + switch (val->intval) { + case POWER_SUPPLY_CHARGE_TYPE_NONE: + chg_config = 0x0; + break; + case POWER_SUPPLY_CHARGE_TYPE_TRICKLE: + chg_config = 0x1; + force_20pct = 0x1; + en_term = 0x0; + break; + case POWER_SUPPLY_CHARGE_TYPE_FAST: + chg_config = 0x1; + force_20pct = 0x0; + en_term = 0x1; + break; + default: + return -EINVAL; + } + + if (chg_config) { /* Enabling the charger */ + ret = bq24190_write_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, + force_20pct); + if (ret < 0) + return ret; + + ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC, + BQ24190_REG_CTTC_EN_TERM_MASK, + BQ24190_REG_CTTC_EN_TERM_SHIFT, + en_term); + if (ret < 0) + return ret; + } + + return bq24190_write_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_CHG_CONFIG_MASK, + BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config); +} + +static int bq24190_charger_get_health(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int health, ret; + + mutex_lock(&bdi->f_reg_lock); + + if (bdi->charger_health_valid) { + v = bdi->f_reg; + bdi->charger_health_valid = false; + mutex_unlock(&bdi->f_reg_lock); + } else { + mutex_unlock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &v); + if (ret < 0) + return ret; + } + + if (v & BQ24190_REG_F_BOOST_FAULT_MASK) { + /* + * This could be over-current or over-voltage but there's + * no way to tell which. Return 'OVERVOLTAGE' since there + * isn't an 'OVERCURRENT' value defined that we can return + * even if it was over-current. + */ + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + } else { + v &= BQ24190_REG_F_CHRG_FAULT_MASK; + v >>= BQ24190_REG_F_CHRG_FAULT_SHIFT; + + switch (v) { + case 0x0: /* Normal */ + health = POWER_SUPPLY_HEALTH_GOOD; + break; + case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */ + /* + * This could be over-voltage or under-voltage + * and there's no way to tell which. Instead + * of looking foolish and returning 'OVERVOLTAGE' + * when its really under-voltage, just return + * 'UNSPEC_FAILURE'. + */ + health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + case 0x2: /* Thermal Shutdown */ + health = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + case 0x3: /* Charge Safety Timer Expiration */ + health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; + break; + default: + health = POWER_SUPPLY_HEALTH_UNKNOWN; + } + } + + val->intval = health; + + return 0; +} + +static int bq24190_charger_get_online(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_SS, + BQ24190_REG_SS_PG_STAT_MASK, + BQ24190_REG_SS_PG_STAT_SHIFT, &v); + if (ret < 0) + return ret; + + val->intval = v; + return 0; +} + +static int bq24190_charger_get_current(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int curr, ret; + + ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, + bq24190_ccc_ichg_values, + ARRAY_SIZE(bq24190_ccc_ichg_values), &curr); + if (ret < 0) + return ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); + if (ret < 0) + return ret; + + /* If FORCE_20PCT is enabled, then current is 20% of ICHG value */ + if (v) + curr /= 5; + + val->intval = curr; + return 0; +} + +static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1; + + val->intval = bq24190_ccc_ichg_values[idx]; + return 0; +} + +static int bq24190_charger_set_current(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + u8 v; + int ret, curr = val->intval; + + ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); + if (ret < 0) + return ret; + + /* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */ + if (v) + curr *= 5; + + return bq24190_set_field_val(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, + bq24190_ccc_ichg_values, + ARRAY_SIZE(bq24190_ccc_ichg_values), curr); +} + +static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int voltage, ret; + + ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC, + BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, + bq24190_cvc_vreg_values, + ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage); + if (ret < 0) + return ret; + + val->intval = voltage; + return 0; +} + +static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1; + + val->intval = bq24190_cvc_vreg_values[idx]; + return 0; +} + +static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + return bq24190_set_field_val(bdi, BQ24190_REG_CVC, + BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, + bq24190_cvc_vreg_values, + ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval); +} + +static int bq24190_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_get_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = bq24190_charger_get_charge_type(bdi, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = bq24190_charger_get_health(bdi, val); + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = bq24190_charger_get_online(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = bq24190_charger_get_current(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + ret = bq24190_charger_get_current_max(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = bq24190_charger_get_voltage(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + ret = bq24190_charger_get_voltage_max(bdi, val); + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_SYSTEM; + ret = 0; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = bdi->model_name; + ret = 0; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = BQ24190_MANUFACTURER; + ret = 0; + break; + default: + ret = -ENODATA; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_charger_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_get_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = bq24190_charger_set_charge_type(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = bq24190_charger_set_current(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = bq24190_charger_set_voltage(bdi, val); + break; + default: + ret = -EINVAL; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = 1; + break; + default: + ret = 0; + } + + return ret; +} + +static enum power_supply_property bq24190_charger_properties[] = { + POWER_SUPPLY_PROP_TYPE, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static char *bq24190_charger_supplied_to[] = { + "main-battery", +}; + +static void bq24190_charger_init(struct power_supply *charger) +{ + charger->name = "bq24190-charger"; + charger->type = POWER_SUPPLY_TYPE_USB; + charger->properties = bq24190_charger_properties; + charger->num_properties = ARRAY_SIZE(bq24190_charger_properties); + charger->supplied_to = bq24190_charger_supplied_to; + charger->num_supplies = ARRAY_SIZE(bq24190_charger_supplied_to); + charger->get_property = bq24190_charger_get_property; + charger->set_property = bq24190_charger_set_property; + charger->property_is_writeable = bq24190_charger_property_is_writeable; +} + +/* Battery power supply property routines */ + +static int bq24190_battery_get_status(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 ss_reg, chrg_fault; + int status, ret; + + mutex_lock(&bdi->f_reg_lock); + + if (bdi->battery_status_valid) { + chrg_fault = bdi->f_reg; + bdi->battery_status_valid = false; + mutex_unlock(&bdi->f_reg_lock); + } else { + mutex_unlock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &chrg_fault); + if (ret < 0) + return ret; + } + + chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK; + chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT; + + ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); + if (ret < 0) + return ret; + + /* + * The battery must be discharging when any of these are true: + * - there is no good power source; + * - there is a charge fault. + * Could also be discharging when in "supplement mode" but + * there is no way to tell when its in that mode. + */ + if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) { + status = POWER_SUPPLY_STATUS_DISCHARGING; + } else { + ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK; + ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT; + + switch (ss_reg) { + case 0x0: /* Not Charging */ + status = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case 0x1: /* Pre-charge */ + case 0x2: /* Fast Charging */ + status = POWER_SUPPLY_STATUS_CHARGING; + break; + case 0x3: /* Charge Termination Done */ + status = POWER_SUPPLY_STATUS_FULL; + break; + default: + ret = -EIO; + } + } + + if (!ret) + val->intval = status; + + return ret; +} + +static int bq24190_battery_get_health(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int health, ret; + + mutex_lock(&bdi->f_reg_lock); + + if (bdi->battery_health_valid) { + v = bdi->f_reg; + bdi->battery_health_valid = false; + mutex_unlock(&bdi->f_reg_lock); + } else { + mutex_unlock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &v); + if (ret < 0) + return ret; + } + + if (v & BQ24190_REG_F_BAT_FAULT_MASK) { + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + } else { + v &= BQ24190_REG_F_NTC_FAULT_MASK; + v >>= BQ24190_REG_F_NTC_FAULT_SHIFT; + + switch (v) { + case 0x0: /* Normal */ + health = POWER_SUPPLY_HEALTH_GOOD; + break; + case 0x1: /* TS1 Cold */ + case 0x3: /* TS2 Cold */ + case 0x5: /* Both Cold */ + health = POWER_SUPPLY_HEALTH_COLD; + break; + case 0x2: /* TS1 Hot */ + case 0x4: /* TS2 Hot */ + case 0x6: /* Both Hot */ + health = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + default: + health = POWER_SUPPLY_HEALTH_UNKNOWN; + } + } + + val->intval = health; + return 0; +} + +static int bq24190_battery_get_online(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 batfet_disable; + int ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_MOC, + BQ24190_REG_MOC_BATFET_DISABLE_MASK, + BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable); + if (ret < 0) + return ret; + + val->intval = !batfet_disable; + return 0; +} + +static int bq24190_battery_set_online(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + return bq24190_write_mask(bdi, BQ24190_REG_MOC, + BQ24190_REG_MOC_BATFET_DISABLE_MASK, + BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval); +} + +static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int temp, ret; + + ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC, + BQ24190_REG_ICTRC_TREG_MASK, + BQ24190_REG_ICTRC_TREG_SHIFT, + bq24190_ictrc_treg_values, + ARRAY_SIZE(bq24190_ictrc_treg_values), &temp); + if (ret < 0) + return ret; + + val->intval = temp; + return 0; +} + +static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC, + BQ24190_REG_ICTRC_TREG_MASK, + BQ24190_REG_ICTRC_TREG_SHIFT, + bq24190_ictrc_treg_values, + ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval); +} + +static int bq24190_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, battery); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_get_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = bq24190_battery_get_status(bdi, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = bq24190_battery_get_health(bdi, val); + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = bq24190_battery_get_online(bdi, val); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + /* Could be Li-on or Li-polymer but no way to tell which */ + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + ret = 0; + break; + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: + ret = bq24190_battery_get_temp_alert_max(bdi, val); + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_SYSTEM; + ret = 0; + break; + default: + ret = -ENODATA; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_battery_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, battery); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_put_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = bq24190_battery_set_online(bdi, val); + break; + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: + ret = bq24190_battery_set_temp_alert_max(bdi, val); + break; + default: + ret = -EINVAL; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_battery_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: + ret = 1; + break; + default: + ret = 0; + } + + return ret; +} + +static enum power_supply_property bq24190_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_TEMP_ALERT_MAX, + POWER_SUPPLY_PROP_SCOPE, +}; + +static void bq24190_battery_init(struct power_supply *battery) +{ + battery->name = "bq24190-battery"; + battery->type = POWER_SUPPLY_TYPE_BATTERY; + battery->properties = bq24190_battery_properties; + battery->num_properties = ARRAY_SIZE(bq24190_battery_properties); + battery->get_property = bq24190_battery_get_property; + battery->set_property = bq24190_battery_set_property; + battery->property_is_writeable = bq24190_battery_property_is_writeable; +} + +static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) +{ + struct bq24190_dev_info *bdi = data; + bool alert_userspace = false; + u8 ss_reg, f_reg; + int ret; + + pm_runtime_get_sync(bdi->dev); + + ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); + if (ret < 0) { + dev_err(bdi->dev, "Can't read SS reg: %d\n", ret); + goto out; + } + + if (ss_reg != bdi->ss_reg) { + /* + * The device is in host mode so when PG_STAT goes from 1->0 + * (i.e., power removed) HIZ needs to be disabled. + */ + if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) && + !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) { + ret = bq24190_write_mask(bdi, BQ24190_REG_ISC, + BQ24190_REG_ISC_EN_HIZ_MASK, + BQ24190_REG_ISC_EN_HIZ_SHIFT, + 0); + if (ret < 0) + dev_err(bdi->dev, "Can't access ISC reg: %d\n", + ret); + } + + bdi->ss_reg = ss_reg; + alert_userspace = true; + } + + mutex_lock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg); + if (ret < 0) { + mutex_unlock(&bdi->f_reg_lock); + dev_err(bdi->dev, "Can't read F reg: %d\n", ret); + goto out; + } + + if (f_reg != bdi->f_reg) { + bdi->f_reg = f_reg; + bdi->charger_health_valid = true; + bdi->battery_health_valid = true; + bdi->battery_status_valid = true; + + alert_userspace = true; + } + + mutex_unlock(&bdi->f_reg_lock); + + /* + * Sometimes bq24190 gives a steady trickle of interrupts even + * though the watchdog timer is turned off and neither the STATUS + * nor FAULT registers have changed. Weed out these sprurious + * interrupts so userspace isn't alerted for no reason. + * In addition, the chip always generates an interrupt after + * register reset so we should ignore that one (the very first + * interrupt received). + */ + if (alert_userspace && !bdi->first_time) { + power_supply_changed(&bdi->charger); + power_supply_changed(&bdi->battery); + bdi->first_time = false; + } + +out: + pm_runtime_put_sync(bdi->dev); + + dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg); + + return IRQ_HANDLED; +} + +static int bq24190_hw_init(struct bq24190_dev_info *bdi) +{ + u8 v; + int ret; + + pm_runtime_get_sync(bdi->dev); + + /* First check that the device really is what its supposed to be */ + ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS, + BQ24190_REG_VPRS_PN_MASK, + BQ24190_REG_VPRS_PN_SHIFT, + &v); + if (ret < 0) + goto out; + + if (v != bdi->model) { + ret = -ENODEV; + goto out; + } + + ret = bq24190_register_reset(bdi); + if (ret < 0) + goto out; + + ret = bq24190_set_mode_host(bdi); +out: + pm_runtime_put_sync(bdi->dev); + return ret; +} + +#ifdef CONFIG_OF +static int bq24190_setup_dt(struct bq24190_dev_info *bdi) +{ + bdi->irq = irq_of_parse_and_map(bdi->dev->of_node, 0); + if (bdi->irq <= 0) + return -1; + + return 0; +} +#else +static int bq24190_setup_dt(struct bq24190_dev_info *bdi) +{ + return -1; +} +#endif + +static int bq24190_setup_pdata(struct bq24190_dev_info *bdi, + struct bq24190_platform_data *pdata) +{ + int ret; + + if (!gpio_is_valid(pdata->gpio_int)) + return -1; + + ret = gpio_request(pdata->gpio_int, dev_name(bdi->dev)); + if (ret < 0) + return -1; + + ret = gpio_direction_input(pdata->gpio_int); + if (ret < 0) + goto out; + + bdi->irq = gpio_to_irq(pdata->gpio_int); + if (!bdi->irq) + goto out; + + bdi->gpio_int = pdata->gpio_int; + return 0; + +out: + gpio_free(pdata->gpio_int); + return -1; +} + +static int bq24190_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct device *dev = &client->dev; + struct bq24190_platform_data *pdata = client->dev.platform_data; + struct bq24190_dev_info *bdi; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(dev, "No support for SMBUS_BYTE_DATA\n"); + return -ENODEV; + } + + bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL); + if (!bdi) { + dev_err(dev, "Can't alloc bdi struct\n"); + return -ENOMEM; + } + + bdi->client = client; + bdi->dev = dev; + bdi->model = id->driver_data; + strncpy(bdi->model_name, id->name, I2C_NAME_SIZE); + mutex_init(&bdi->f_reg_lock); + bdi->first_time = true; + bdi->charger_health_valid = false; + bdi->battery_health_valid = false; + bdi->battery_status_valid = false; + + i2c_set_clientdata(client, bdi); + + if (dev->of_node) + ret = bq24190_setup_dt(bdi); + else + ret = bq24190_setup_pdata(bdi, pdata); + + if (ret) { + dev_err(dev, "Can't get irq info\n"); + return -EINVAL; + } + + ret = devm_request_threaded_irq(dev, bdi->irq, NULL, + bq24190_irq_handler_thread, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "bq24190-charger", bdi); + if (ret < 0) { + dev_err(dev, "Can't set up irq handler\n"); + goto out1; + } + + pm_runtime_enable(dev); + pm_runtime_resume(dev); + + ret = bq24190_hw_init(bdi); + if (ret < 0) { + dev_err(dev, "Hardware init failed\n"); + goto out2; + } + + bq24190_charger_init(&bdi->charger); + + ret = power_supply_register(dev, &bdi->charger); + if (ret) { + dev_err(dev, "Can't register charger\n"); + goto out2; + } + + bq24190_battery_init(&bdi->battery); + + ret = power_supply_register(dev, &bdi->battery); + if (ret) { + dev_err(dev, "Can't register battery\n"); + goto out3; + } + + ret = bq24190_sysfs_create_group(bdi); + if (ret) { + dev_err(dev, "Can't create sysfs entries\n"); + goto out4; + } + + return 0; + +out4: + power_supply_unregister(&bdi->battery); +out3: + power_supply_unregister(&bdi->charger); +out2: + pm_runtime_disable(dev); +out1: + if (bdi->gpio_int) + gpio_free(bdi->gpio_int); + + return ret; +} + +static int bq24190_remove(struct i2c_client *client) +{ + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + pm_runtime_get_sync(bdi->dev); + bq24190_register_reset(bdi); + pm_runtime_put_sync(bdi->dev); + + bq24190_sysfs_remove_group(bdi); + power_supply_unregister(&bdi->battery); + power_supply_unregister(&bdi->charger); + pm_runtime_disable(bdi->dev); + + if (bdi->gpio_int) + gpio_free(bdi->gpio_int); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bq24190_pm_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + pm_runtime_get_sync(bdi->dev); + bq24190_register_reset(bdi); + pm_runtime_put_sync(bdi->dev); + + return 0; +} + +static int bq24190_pm_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + bdi->charger_health_valid = false; + bdi->battery_health_valid = false; + bdi->battery_status_valid = false; + + pm_runtime_get_sync(bdi->dev); + bq24190_register_reset(bdi); + pm_runtime_put_sync(bdi->dev); + + /* Things may have changed while suspended so alert upper layer */ + power_supply_changed(&bdi->charger); + power_supply_changed(&bdi->battery); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(bq24190_pm_ops, bq24190_pm_suspend, bq24190_pm_resume); + +/* + * Only support the bq24190 right now. The bq24192, bq24192i, and bq24193 + * are similar but not identical so the driver needs to be extended to + * support them. + */ +static const struct i2c_device_id bq24190_i2c_ids[] = { + { "bq24190", BQ24190_REG_VPRS_PN_24190 }, + { }, +}; + +#ifdef CONFIG_OF +static const struct of_device_id bq24190_of_match[] = { + { .compatible = "ti,bq24190", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bq24190_of_match); +#else +static const struct of_device_id bq24190_of_match[] = { + { }, +}; +#endif + +static struct i2c_driver bq24190_driver = { + .probe = bq24190_probe, + .remove = bq24190_remove, + .id_table = bq24190_i2c_ids, + .driver = { + .name = "bq24190-charger", + .owner = THIS_MODULE, + .pm = &bq24190_pm_ops, + .of_match_table = of_match_ptr(bq24190_of_match), + }, +}; +module_i2c_driver(bq24190_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>"); +MODULE_ALIAS("i2c:bq24190-charger"); +MODULE_DESCRIPTION("TI BQ24190 Charger Driver"); diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c index c58d0e3..d02ae02 100644 --- a/drivers/power/collie_battery.c +++ b/drivers/power/collie_battery.c @@ -287,7 +287,7 @@ static struct gpio collie_batt_gpios[] = { }; #ifdef CONFIG_PM -static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state) +static int collie_bat_suspend(struct ucb1x00_dev *dev) { /* flush all pending status updates */ flush_work(&bat_work); diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c index 0ee1e14..b4513f2 100644 --- a/drivers/power/max8925_power.c +++ b/drivers/power/max8925_power.c @@ -458,6 +458,7 @@ max8925_power_dt_init(struct platform_device *pdev) of_property_read_u32(np, "fast-charge", &fast_charge); of_property_read_u32(np, "no-insert-detect", &no_insert_detect); of_property_read_u32(np, "no-temp-support", &no_temp_support); + of_node_put(np); pdata->batt_detect = batt_detect; pdata->fast_charge = fast_charge; diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 3b2d5df..00e6672 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -67,23 +67,42 @@ static int __power_supply_changed_work(struct device *dev, void *data) static void power_supply_changed_work(struct work_struct *work) { + unsigned long flags; struct power_supply *psy = container_of(work, struct power_supply, changed_work); dev_dbg(psy->dev, "%s\n", __func__); - class_for_each_device(power_supply_class, NULL, psy, - __power_supply_changed_work); - - power_supply_update_leds(psy); - - kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE); + spin_lock_irqsave(&psy->changed_lock, flags); + if (psy->changed) { + psy->changed = false; + spin_unlock_irqrestore(&psy->changed_lock, flags); + class_for_each_device(power_supply_class, NULL, psy, + __power_supply_changed_work); + power_supply_update_leds(psy); + kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE); + spin_lock_irqsave(&psy->changed_lock, flags); + } + /* + * Dependent power supplies (e.g. battery) may have changed state + * as a result of this event, so poll again and hold the + * wakeup_source until all events are processed. + */ + if (!psy->changed) + pm_relax(psy->dev); + spin_unlock_irqrestore(&psy->changed_lock, flags); } void power_supply_changed(struct power_supply *psy) { + unsigned long flags; + dev_dbg(psy->dev, "%s\n", __func__); + spin_lock_irqsave(&psy->changed_lock, flags); + psy->changed = true; + pm_stay_awake(psy->dev); + spin_unlock_irqrestore(&psy->changed_lock, flags); schedule_work(&psy->changed_work); } EXPORT_SYMBOL_GPL(power_supply_changed); @@ -500,6 +519,11 @@ int power_supply_register(struct device *parent, struct power_supply *psy) goto check_supplies_failed; } + spin_lock_init(&psy->changed_lock); + rc = device_init_wakeup(dev, true); + if (rc) + goto wakeup_init_failed; + rc = kobject_set_name(&dev->kobj, "%s", psy->name); if (rc) goto kobject_set_name_failed; @@ -529,6 +553,7 @@ create_triggers_failed: register_cooler_failed: psy_unregister_thermal(psy); register_thermal_failed: +wakeup_init_failed: device_del(dev); kobject_set_name_failed: device_add_failed: @@ -546,6 +571,7 @@ void power_supply_unregister(struct power_supply *psy) power_supply_remove_triggers(psy); psy_unregister_cooler(psy); psy_unregister_thermal(psy); + device_init_wakeup(psy->dev, false); device_unregister(psy->dev); } EXPORT_SYMBOL_GPL(power_supply_unregister); diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 29178f7..44420d1 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -118,7 +118,7 @@ static ssize_t power_supply_store_property(struct device *dev, long long_val; /* TODO: support other types than int */ - ret = strict_strtol(buf, 10, &long_val); + ret = kstrtol(buf, 10, &long_val); if (ret < 0) return ret; diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index ee039dc..9b3ea53 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -14,6 +14,12 @@ config POWER_RESET_GPIO If your board needs a GPIO high/low to power down, say Y and create a binding in your devicetree. +config POWER_RESET_MSM + bool "Qualcomm MSM power-off driver" + depends on POWER_RESET && ARCH_MSM + help + Power off and restart support for Qualcomm boards. + config POWER_RESET_QNAP bool "QNAP power-off driver" depends on OF_GPIO && POWER_RESET && PLAT_ORION @@ -34,7 +40,14 @@ config POWER_RESET_RESTART config POWER_RESET_VEXPRESS bool "ARM Versatile Express power-off and reset driver" depends on ARM || ARM64 - depends on POWER_RESET + depends on POWER_RESET && VEXPRESS_CONFIG help Power off and reset support for the ARM Ltd. Versatile Express boards. + +config POWER_RESET_XGENE + bool "APM SoC X-Gene reset driver" + depends on ARM64 + depends on POWER_RESET + help + Reboot support for the APM SoC X-Gene Eval boards. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 372807f..3e6ed88 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1,4 +1,6 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o +obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o +obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o diff --git a/drivers/power/reset/msm-poweroff.c b/drivers/power/reset/msm-poweroff.c new file mode 100644 index 0000000..774f9a3 --- /dev/null +++ b/drivers/power/reset/msm-poweroff.c @@ -0,0 +1,73 @@ +/* Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/reboot.h> + +#include <asm/system_misc.h> + +static void __iomem *msm_ps_hold; + +static void do_msm_restart(enum reboot_mode reboot_mode, const char *cmd) +{ + writel(0, msm_ps_hold); + mdelay(10000); +} + +static void do_msm_poweroff(void) +{ + /* TODO: Add poweroff capability */ + do_msm_restart(REBOOT_HARD, NULL); +} + +static int msm_restart_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *mem; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + msm_ps_hold = devm_ioremap_resource(dev, mem); + if (IS_ERR(msm_ps_hold)) + return PTR_ERR(msm_ps_hold); + + pm_power_off = do_msm_poweroff; + arm_pm_restart = do_msm_restart; + return 0; +} + +static const struct of_device_id of_msm_restart_match[] = { + { .compatible = "qcom,pshold", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_msm_restart_match); + +static struct platform_driver msm_restart_driver = { + .probe = msm_restart_probe, + .driver = { + .name = "msm-restart", + .of_match_table = of_match_ptr(of_msm_restart_match), + }, +}; + +static int __init msm_restart_init(void) +{ + return platform_driver_register(&msm_restart_driver); +} +device_initcall(msm_restart_init); diff --git a/drivers/power/reset/xgene-reboot.c b/drivers/power/reset/xgene-reboot.c new file mode 100644 index 0000000..ecd55f8 --- /dev/null +++ b/drivers/power/reset/xgene-reboot.c @@ -0,0 +1,103 @@ +/* + * AppliedMicro X-Gene SoC Reboot Driver + * + * Copyright (c) 2013, Applied Micro Circuits Corporation + * Author: Feng Kan <fkan@apm.com> + * Author: Loc Ho <lho@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This driver provides system reboot functionality for APM X-Gene SoC. + * For system shutdown, this is board specify. If a board designer + * implements GPIO shutdown, use the gpio-poweroff.c driver. + */ +#include <linux/io.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/stat.h> +#include <linux/slab.h> +#include <asm/system_misc.h> + +struct xgene_reboot_context { + struct platform_device *pdev; + void *csr; + u32 mask; +}; + +static struct xgene_reboot_context *xgene_restart_ctx; + +static void xgene_restart(char str, const char *cmd) +{ + struct xgene_reboot_context *ctx = xgene_restart_ctx; + unsigned long timeout; + + /* Issue the reboot */ + if (ctx) + writel(ctx->mask, ctx->csr); + + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) + cpu_relax(); + + dev_emerg(&ctx->pdev->dev, "Unable to restart system\n"); +} + +static int xgene_reboot_probe(struct platform_device *pdev) +{ + struct xgene_reboot_context *ctx; + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + dev_err(&pdev->dev, "out of memory for context\n"); + return -ENODEV; + } + + ctx->csr = of_iomap(pdev->dev.of_node, 0); + if (!ctx->csr) { + devm_kfree(&pdev->dev, ctx); + dev_err(&pdev->dev, "can not map resource\n"); + return -ENODEV; + } + + if (of_property_read_u32(pdev->dev.of_node, "mask", &ctx->mask)) + ctx->mask = 0xFFFFFFFF; + + ctx->pdev = pdev; + arm_pm_restart = xgene_restart; + xgene_restart_ctx = ctx; + + return 0; +} + +static struct of_device_id xgene_reboot_of_match[] = { + { .compatible = "apm,xgene-reboot" }, + {} +}; + +static struct platform_driver xgene_reboot_driver = { + .probe = xgene_reboot_probe, + .driver = { + .name = "xgene-reboot", + .of_match_table = xgene_reboot_of_match, + }, +}; + +static int __init xgene_reboot_init(void) +{ + return platform_driver_register(&xgene_reboot_driver); +} +device_initcall(xgene_reboot_init); diff --git a/drivers/power/rx51_battery.c b/drivers/power/rx51_battery.c index 8a6288d..1bc5857 100644 --- a/drivers/power/rx51_battery.c +++ b/drivers/power/rx51_battery.c @@ -25,6 +25,10 @@ #include <linux/slab.h> #include <linux/i2c/twl4030-madc.h> +/* RX51 specific channels */ +#define TWL4030_MADC_BTEMP_RX51 TWL4030_MADC_ADCIN0 +#define TWL4030_MADC_BCI_RX51 TWL4030_MADC_ADCIN4 + struct rx51_device_info { struct device *dev; struct power_supply bat; @@ -37,7 +41,7 @@ static int rx51_battery_read_adc(int channel) { struct twl4030_madc_request req; - req.channels = 1 << channel; + req.channels = channel; req.do_avg = 1; req.method = TWL4030_MADC_SW1; req.func_cb = NULL; @@ -47,7 +51,7 @@ static int rx51_battery_read_adc(int channel) if (twl4030_madc_conversion(&req) <= 0) return -ENODATA; - return req.rbuf[channel]; + return req.rbuf[ffs(channel) - 1]; } /* @@ -56,7 +60,7 @@ static int rx51_battery_read_adc(int channel) */ static int rx51_battery_read_voltage(struct rx51_device_info *di) { - int voltage = rx51_battery_read_adc(12); + int voltage = rx51_battery_read_adc(TWL4030_MADC_VBAT); if (voltage < 0) return voltage; @@ -108,7 +112,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di) { int min = 0; int max = ARRAY_SIZE(rx51_temp_table2) - 1; - int raw = rx51_battery_read_adc(0); + int raw = rx51_battery_read_adc(TWL4030_MADC_BTEMP_RX51); /* Zero and negative values are undefined */ if (raw <= 0) @@ -142,7 +146,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di) */ static int rx51_battery_read_capacity(struct rx51_device_info *di) { - int capacity = rx51_battery_read_adc(4); + int capacity = rx51_battery_read_adc(TWL4030_MADC_BCI_RX51); if (capacity < 0) return capacity; diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c index 0224de5..f4d80df 100644 --- a/drivers/power/tosa_battery.c +++ b/drivers/power/tosa_battery.c @@ -150,7 +150,7 @@ static void tosa_bat_external_power_changed(struct power_supply *psy) static irqreturn_t tosa_bat_gpio_isr(int irq, void *data) { - pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); + pr_info("tosa_bat_gpio irq\n"); schedule_work(&bat_work); return IRQ_HANDLED; } diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c index be98e70..d98abe9 100644 --- a/drivers/power/twl4030_charger.c +++ b/drivers/power/twl4030_charger.c @@ -189,7 +189,12 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) /* Need to keep regulator on */ if (!bci->usb_enabled) { - regulator_enable(bci->usb_reg); + ret = regulator_enable(bci->usb_reg); + if (ret) { + dev_err(bci->dev, + "Failed to enable regulator\n"); + return ret; + } bci->usb_enabled = 1; } diff --git a/drivers/power/twl4030_madc_battery.c b/drivers/power/twl4030_madc_battery.c new file mode 100644 index 0000000..7ef445a --- /dev/null +++ b/drivers/power/twl4030_madc_battery.c @@ -0,0 +1,245 @@ +/* + * Dumb driver for LiIon batteries using TWL4030 madc. + * + * Copyright 2013 Golden Delicious Computers + * Lukas Märdian <lukas@goldelico.com> + * + * Based on dumb driver for gta01 battery + * Copyright 2009 Openmoko, Inc + * Balaji Rao <balajirrao@openmoko.org> + */ + +#include <linux/module.h> +#include <linux/param.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/slab.h> +#include <linux/sort.h> +#include <linux/i2c/twl4030-madc.h> +#include <linux/power/twl4030_madc_battery.h> + +struct twl4030_madc_battery { + struct power_supply psy; + struct twl4030_madc_bat_platform_data *pdata; +}; + +static enum power_supply_property twl4030_madc_bat_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, +}; + +static int madc_read(int index) +{ + struct twl4030_madc_request req; + int val; + + req.channels = index; + req.method = TWL4030_MADC_SW2; + req.type = TWL4030_MADC_WAIT; + req.do_avg = 0; + req.raw = false; + req.func_cb = NULL; + + val = twl4030_madc_conversion(&req); + if (val < 0) + return val; + + return req.rbuf[ffs(index) - 1]; +} + +static int twl4030_madc_bat_get_charging_status(void) +{ + return (madc_read(TWL4030_MADC_ICHG) > 0) ? 1 : 0; +} + +static int twl4030_madc_bat_get_voltage(void) +{ + return madc_read(TWL4030_MADC_VBAT); +} + +static int twl4030_madc_bat_get_current(void) +{ + return madc_read(TWL4030_MADC_ICHG) * 1000; +} + +static int twl4030_madc_bat_get_temp(void) +{ + return madc_read(TWL4030_MADC_BTEMP) * 10; +} + +static int twl4030_madc_bat_voltscale(struct twl4030_madc_battery *bat, + int volt) +{ + struct twl4030_madc_bat_calibration *calibration; + int i, res = 0; + + /* choose charging curve */ + if (twl4030_madc_bat_get_charging_status()) + calibration = bat->pdata->charging; + else + calibration = bat->pdata->discharging; + + if (volt > calibration[0].voltage) { + res = calibration[0].level; + } else { + for (i = 0; calibration[i+1].voltage >= 0; i++) { + if (volt <= calibration[i].voltage && + volt >= calibration[i+1].voltage) { + /* interval found - interpolate within range */ + res = calibration[i].level - + ((calibration[i].voltage - volt) * + (calibration[i].level - + calibration[i+1].level)) / + (calibration[i].voltage - + calibration[i+1].voltage); + break; + } + } + } + return res; +} + +static int twl4030_madc_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct twl4030_madc_battery *bat = container_of(psy, + struct twl4030_madc_battery, psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (twl4030_madc_bat_voltscale(bat, + twl4030_madc_bat_get_voltage()) > 95) + val->intval = POWER_SUPPLY_STATUS_FULL; + else { + if (twl4030_madc_bat_get_charging_status()) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + } + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = twl4030_madc_bat_get_voltage() * 1000; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = twl4030_madc_bat_get_current(); + break; + case POWER_SUPPLY_PROP_PRESENT: + /* assume battery is always present */ + val->intval = 1; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: { + int percent = twl4030_madc_bat_voltscale(bat, + twl4030_madc_bat_get_voltage()); + val->intval = (percent * bat->pdata->capacity) / 100; + break; + } + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = twl4030_madc_bat_voltscale(bat, + twl4030_madc_bat_get_voltage()); + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = bat->pdata->capacity; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = twl4030_madc_bat_get_temp(); + break; + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: { + int percent = twl4030_madc_bat_voltscale(bat, + twl4030_madc_bat_get_voltage()); + /* in mAh */ + int chg = (percent * (bat->pdata->capacity/1000))/100; + + /* assume discharge with 400 mA (ca. 1.5W) */ + val->intval = (3600l * chg) / 400; + break; + } + default: + return -EINVAL; + } + + return 0; +} + +static void twl4030_madc_bat_ext_changed(struct power_supply *psy) +{ + struct twl4030_madc_battery *bat = container_of(psy, + struct twl4030_madc_battery, psy); + + power_supply_changed(&bat->psy); +} + +static int twl4030_cmp(const void *a, const void *b) +{ + return ((struct twl4030_madc_bat_calibration *)b)->voltage - + ((struct twl4030_madc_bat_calibration *)a)->voltage; +} + +static int twl4030_madc_battery_probe(struct platform_device *pdev) +{ + struct twl4030_madc_battery *twl4030_madc_bat; + struct twl4030_madc_bat_platform_data *pdata = pdev->dev.platform_data; + + twl4030_madc_bat = kzalloc(sizeof(*twl4030_madc_bat), GFP_KERNEL); + if (!twl4030_madc_bat) + return -ENOMEM; + + twl4030_madc_bat->psy.name = "twl4030_battery"; + twl4030_madc_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY; + twl4030_madc_bat->psy.properties = twl4030_madc_bat_props; + twl4030_madc_bat->psy.num_properties = + ARRAY_SIZE(twl4030_madc_bat_props); + twl4030_madc_bat->psy.get_property = twl4030_madc_bat_get_property; + twl4030_madc_bat->psy.external_power_changed = + twl4030_madc_bat_ext_changed; + + /* sort charging and discharging calibration data */ + sort(pdata->charging, pdata->charging_size, + sizeof(struct twl4030_madc_bat_calibration), + twl4030_cmp, NULL); + sort(pdata->discharging, pdata->discharging_size, + sizeof(struct twl4030_madc_bat_calibration), + twl4030_cmp, NULL); + + twl4030_madc_bat->pdata = pdata; + platform_set_drvdata(pdev, twl4030_madc_bat); + power_supply_register(&pdev->dev, &twl4030_madc_bat->psy); + + return 0; +} + +static int twl4030_madc_battery_remove(struct platform_device *pdev) +{ + struct twl4030_madc_battery *bat = platform_get_drvdata(pdev); + + power_supply_unregister(&bat->psy); + kfree(bat); + + return 0; +} + +static struct platform_driver twl4030_madc_battery_driver = { + .driver = { + .name = "twl4030_madc_battery", + }, + .probe = twl4030_madc_battery_probe, + .remove = twl4030_madc_battery_remove, +}; +module_platform_driver(twl4030_madc_battery_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Lukas Märdian <lukas@goldelico.com>"); +MODULE_DESCRIPTION("twl4030_madc battery driver"); diff --git a/include/linux/power/bq24190_charger.h b/include/linux/power/bq24190_charger.h new file mode 100644 index 0000000..9f02837 --- /dev/null +++ b/include/linux/power/bq24190_charger.h @@ -0,0 +1,16 @@ +/* + * Platform data for the TI bq24190 battery charger driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _BQ24190_CHARGER_H_ +#define _BQ24190_CHARGER_H_ + +struct bq24190_platform_data { + unsigned int gpio_int; /* GPIO pin that's connected to INT# */ +}; + +#endif diff --git a/include/linux/power/twl4030_madc_battery.h b/include/linux/power/twl4030_madc_battery.h new file mode 100644 index 0000000..23110dc --- /dev/null +++ b/include/linux/power/twl4030_madc_battery.h @@ -0,0 +1,39 @@ +/* + * Dumb driver for LiIon batteries using TWL4030 madc. + * + * Copyright 2013 Golden Delicious Computers + * Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __TWL4030_MADC_BATTERY_H +#define __TWL4030_MADC_BATTERY_H + +/* + * Usually we can assume 100% @ 4.15V and 0% @ 3.3V but curves differ for + * charging and discharging! + */ + +struct twl4030_madc_bat_calibration { + short voltage; /* in mV - specify -1 for end of list */ + short level; /* in percent (0 .. 100%) */ +}; + +struct twl4030_madc_bat_platform_data { + unsigned int capacity; /* total capacity in uAh */ + struct twl4030_madc_bat_calibration *charging; + int charging_size; + struct twl4030_madc_bat_calibration *discharging; + int discharging_size; +}; + +#endif diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 804b906..5c26006 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -15,6 +15,7 @@ #include <linux/workqueue.h> #include <linux/leds.h> +#include <linux/spinlock.h> struct device; @@ -194,6 +195,8 @@ struct power_supply { /* private */ struct device *dev; struct work_struct changed_work; + spinlock_t changed_lock; + bool changed; #ifdef CONFIG_THERMAL struct thermal_zone_device *tzd; struct thermal_cooling_device *tcd; |