diff options
author | Francois Romieu <romieu@fr.zoreil.com> | 2008-07-11 22:17:38 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2008-07-22 23:39:11 (GMT) |
commit | c3570acb53c885f8accb8c85eda195781d30632f (patch) | |
tree | 1a6d96fc1b90689c1800587bfa12e490516c7508 | |
parent | 63cd31f60716c4a9f1b5b6ffd804326dc766d2d2 (diff) | |
download | linux-c3570acb53c885f8accb8c85eda195781d30632f.tar.xz |
e1000: delete non NAPI code from the driver
Compile-tested only.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r-- | Documentation/networking/e1000.txt | 14 | ||||
-rw-r--r-- | drivers/net/Kconfig | 14 | ||||
-rw-r--r-- | drivers/net/e1000/e1000.h | 10 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 151 |
4 files changed, 16 insertions, 173 deletions
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt index 61b171c..2df7186 100644 --- a/Documentation/networking/e1000.txt +++ b/Documentation/networking/e1000.txt @@ -513,21 +513,11 @@ Additional Configurations Intel(R) PRO/1000 PT Dual Port Server Connection Intel(R) PRO/1000 PT Dual Port Server Adapter Intel(R) PRO/1000 PF Dual Port Server Adapter - Intel(R) PRO/1000 PT Quad Port Server Adapter + Intel(R) PRO/1000 PT Quad Port Server Adapter NAPI ---- - NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled - or disabled based on the configuration of the kernel. To override - the default, use the following compile-time flags. - - To enable NAPI, compile the driver module, passing in a configuration option: - - make CFLAGS_EXTRA=-DE1000_NAPI install - - To disable NAPI, compile the driver module, passing in a configuration option: - - make CFLAGS_EXTRA=-DE1000_NO_NAPI install + NAPI (Rx polling mode) is enabled in the e1000 driver. See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 32b89b0..fa533c2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1926,20 +1926,6 @@ config E1000 To compile this driver as a module, choose M here. The module will be called e1000. -config E1000_NAPI - bool "Use Rx Polling (NAPI)" - depends on E1000 - help - NAPI is a new driver API designed to reduce CPU and interrupt load - when the driver is receiving lots of packets from the card. It is - still somewhat experimental and thus not yet enabled by default. - - If your estimated Rx load is 10kpps or more, or if the card will be - deployed on potentially unfriendly networks (e.g. in a firewall), - then say Y here. - - If in doubt, say N. - config E1000_DISABLE_PACKET_SPLIT bool "Disable Packet Split for PCI express adapters" depends on E1000 diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 3aeba93..583b823 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -253,9 +253,7 @@ struct e1000_adapter { u16 link_speed; u16 link_duplex; spinlock_t stats_lock; -#ifdef CONFIG_E1000_NAPI spinlock_t tx_queue_lock; -#endif unsigned int total_tx_bytes; unsigned int total_tx_packets; unsigned int total_rx_bytes; @@ -293,22 +291,16 @@ struct e1000_adapter { bool detect_tx_hung; /* RX */ -#ifdef CONFIG_E1000_NAPI bool (*clean_rx)(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do); -#else - bool (*clean_rx)(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); -#endif void (*alloc_rx_buf)(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int cleaned_count); struct e1000_rx_ring *rx_ring; /* One per active queue */ -#ifdef CONFIG_E1000_NAPI struct napi_struct napi; struct net_device *polling_netdev; /* One per active queue */ -#endif + int num_tx_queues; int num_rx_queues; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b2c3e4c..190352c 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,12 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#ifndef CONFIG_E1000_NAPI -#define DRIVERNAPI -#else -#define DRIVERNAPI "-NAPI" -#endif -#define DRV_VERSION "7.3.20-k2"DRIVERNAPI +#define DRV_VERSION "7.3.20-k3-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -138,7 +133,6 @@ static irqreturn_t e1000_intr(int irq, void *data); static irqreturn_t e1000_intr_msi(int irq, void *data); static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); -#ifdef CONFIG_E1000_NAPI static int e1000_clean(struct napi_struct *napi, int budget); static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, @@ -146,12 +140,6 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do); -#else -static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); -static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); -#endif static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int cleaned_count); @@ -512,9 +500,8 @@ int e1000_up(struct e1000_adapter *adapter) clear_bit(__E1000_DOWN, &adapter->flags); -#ifdef CONFIG_E1000_NAPI napi_enable(&adapter->napi); -#endif + e1000_irq_enable(adapter); /* fire a link change interrupt to start the watchdog */ @@ -602,9 +589,8 @@ void e1000_down(struct e1000_adapter *adapter) * reschedule our watchdog timer */ set_bit(__E1000_DOWN, &adapter->flags); -#ifdef CONFIG_E1000_NAPI napi_disable(&adapter->napi); -#endif + e1000_irq_disable(adapter); del_timer_sync(&adapter->tx_fifo_stall_timer); @@ -966,9 +952,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, e1000_set_ethtool_ops(netdev); netdev->tx_timeout = &e1000_tx_timeout; netdev->watchdog_timeo = 5 * HZ; -#ifdef CONFIG_E1000_NAPI netif_napi_add(netdev, &adapter->napi, e1000_clean, 64); -#endif netdev->vlan_rx_register = e1000_vlan_rx_register; netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid; netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid; @@ -1207,16 +1191,12 @@ err_eeprom: if (hw->flash_address) iounmap(hw->flash_address); err_flashmap: -#ifdef CONFIG_E1000_NAPI for (i = 0; i < adapter->num_rx_queues; i++) dev_put(&adapter->polling_netdev[i]); -#endif kfree(adapter->tx_ring); kfree(adapter->rx_ring); -#ifdef CONFIG_E1000_NAPI kfree(adapter->polling_netdev); -#endif err_sw_init: iounmap(hw->hw_addr); err_ioremap: @@ -1244,9 +1224,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; -#ifdef CONFIG_E1000_NAPI int i; -#endif cancel_work_sync(&adapter->reset_task); @@ -1256,10 +1234,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev) * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); -#ifdef CONFIG_E1000_NAPI for (i = 0; i < adapter->num_rx_queues; i++) dev_put(&adapter->polling_netdev[i]); -#endif unregister_netdev(netdev); @@ -1268,9 +1244,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) kfree(adapter->tx_ring); kfree(adapter->rx_ring); -#ifdef CONFIG_E1000_NAPI kfree(adapter->polling_netdev); -#endif iounmap(hw->hw_addr); if (hw->flash_address) @@ -1296,9 +1270,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; -#ifdef CONFIG_E1000_NAPI int i; -#endif /* PCI config space info */ @@ -1356,14 +1328,12 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) return -ENOMEM; } -#ifdef CONFIG_E1000_NAPI for (i = 0; i < adapter->num_rx_queues; i++) { adapter->polling_netdev[i].priv = adapter; dev_hold(&adapter->polling_netdev[i]); set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state); } spin_lock_init(&adapter->tx_queue_lock); -#endif /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); @@ -1398,7 +1368,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter) return -ENOMEM; } -#ifdef CONFIG_E1000_NAPI adapter->polling_netdev = kcalloc(adapter->num_rx_queues, sizeof(struct net_device), GFP_KERNEL); @@ -1407,7 +1376,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter) kfree(adapter->rx_ring); return -ENOMEM; } -#endif return E1000_SUCCESS; } @@ -1472,9 +1440,7 @@ static int e1000_open(struct net_device *netdev) /* From here on the code is the same as e1000_up() */ clear_bit(__E1000_DOWN, &adapter->flags); -#ifdef CONFIG_E1000_NAPI napi_enable(&adapter->napi); -#endif e1000_irq_enable(adapter); @@ -2069,11 +2035,9 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ctrl_ext = er32(CTRL_EXT); /* Reset delay timers after every interrupt */ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; -#ifdef CONFIG_E1000_NAPI /* Auto-Mask interrupts upon ICR access */ ctrl_ext |= E1000_CTRL_EXT_IAME; ew32(IAM, 0xffffffff); -#endif ew32(CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(); } @@ -3777,9 +3741,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; -#ifndef CONFIG_E1000_NAPI - int i; -#endif u32 icr = er32(ICR); /* in NAPI mode read ICR disables interrupts using IAM */ @@ -3800,7 +3761,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } -#ifdef CONFIG_E1000_NAPI if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -3809,20 +3769,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) __netif_rx_schedule(netdev, &adapter->napi); } else e1000_irq_enable(adapter); -#else - adapter->total_tx_bytes = 0; - adapter->total_rx_bytes = 0; - adapter->total_tx_packets = 0; - adapter->total_rx_packets = 0; - - for (i = 0; i < E1000_MAX_INTR; i++) - if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & - !e1000_clean_tx_irq(adapter, adapter->tx_ring))) - break; - - if (likely(adapter->itr_setting & 3)) - e1000_set_itr(adapter); -#endif return IRQ_HANDLED; } @@ -3839,13 +3785,10 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); -#ifndef CONFIG_E1000_NAPI - int i; -#endif + if (unlikely(!icr)) return IRQ_NONE; /* Not our interrupt */ -#ifdef CONFIG_E1000_NAPI /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is * not set, then the adapter didn't send an interrupt */ if (unlikely(hw->mac_type >= e1000_82571 && @@ -3854,7 +3797,6 @@ static irqreturn_t e1000_intr(int irq, void *data) /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No * need for the IMC write */ -#endif if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; @@ -3874,7 +3816,6 @@ static irqreturn_t e1000_intr(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } -#ifdef CONFIG_E1000_NAPI if (unlikely(hw->mac_type < e1000_82571)) { /* disable interrupts, without the synchronize_irq bit */ ew32(IMC, ~0); @@ -3890,46 +3831,14 @@ static irqreturn_t e1000_intr(int irq, void *data) /* this really should not happen! if it does it is basically a * bug, but not a hard error, so enable ints and continue */ e1000_irq_enable(adapter); -#else - /* Writing IMC and IMS is needed for 82547. - * Due to Hub Link bus being occupied, an interrupt - * de-assertion message is not able to be sent. - * When an interrupt assertion message is generated later, - * two messages are re-ordered and sent out. - * That causes APIC to think 82547 is in de-assertion - * state, while 82547 is in assertion state, resulting - * in dead lock. Writing IMC forces 82547 into - * de-assertion state. - */ - if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) - ew32(IMC, ~0); - - adapter->total_tx_bytes = 0; - adapter->total_rx_bytes = 0; - adapter->total_tx_packets = 0; - adapter->total_rx_packets = 0; - - for (i = 0; i < E1000_MAX_INTR; i++) - if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & - !e1000_clean_tx_irq(adapter, adapter->tx_ring))) - break; - if (likely(adapter->itr_setting & 3)) - e1000_set_itr(adapter); - - if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) - e1000_irq_enable(adapter); - -#endif return IRQ_HANDLED; } -#ifdef CONFIG_E1000_NAPI /** * e1000_clean - NAPI Rx polling callback * @adapter: board private structure **/ - static int e1000_clean(struct napi_struct *napi, int budget) { struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); @@ -3966,12 +3875,10 @@ static int e1000_clean(struct napi_struct *napi, int budget) return work_done; } -#endif /** * e1000_clean_tx_irq - Reclaim resources after transmit completes * @adapter: board private structure **/ - static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring) { @@ -3980,9 +3887,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_desc *tx_desc, *eop_desc; struct e1000_buffer *buffer_info; unsigned int i, eop; -#ifdef CONFIG_E1000_NAPI unsigned int count = 0; -#endif bool cleaned = false; unsigned int total_tx_bytes=0, total_tx_packets=0; @@ -4014,11 +3919,10 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); -#ifdef CONFIG_E1000_NAPI #define E1000_TX_WEIGHT 64 /* weight of a sort for tx, to avoid endless transmit cleanup */ - if (count++ == E1000_TX_WEIGHT) break; -#endif + if (count++ == E1000_TX_WEIGHT) + break; } tx_ring->next_to_clean = i; @@ -4131,14 +4035,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, * e1000_clean_rx_irq - Send received data up the network stack; legacy * @adapter: board private structure **/ -#ifdef CONFIG_E1000_NAPI static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do) -#else -static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring) -#endif { struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; @@ -4161,11 +4060,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, struct sk_buff *skb; u8 status; -#ifdef CONFIG_E1000_NAPI if (*work_done >= work_to_do) break; (*work_done)++; -#endif + status = rx_desc->status; skb = buffer_info->skb; buffer_info->skb = NULL; @@ -4251,7 +4149,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, le16_to_cpu(rx_desc->csum), skb); skb->protocol = eth_type_trans(skb, netdev); -#ifdef CONFIG_E1000_NAPI + if (unlikely(adapter->vlgrp && (status & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, @@ -4259,15 +4157,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, } else { netif_receive_skb(skb); } -#else /* CONFIG_E1000_NAPI */ - if (unlikely(adapter->vlgrp && - (status & E1000_RXD_STAT_VP))) { - vlan_hwaccel_rx(skb, adapter->vlgrp, - le16_to_cpu(rx_desc->special)); - } else { - netif_rx(skb); - } -#endif /* CONFIG_E1000_NAPI */ + netdev->last_rx = jiffies; next_desc: @@ -4301,14 +4191,9 @@ next_desc: * @adapter: board private structure **/ -#ifdef CONFIG_E1000_NAPI static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do) -#else -static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring) -#endif { union e1000_rx_desc_packet_split *rx_desc, *next_rxd; struct net_device *netdev = adapter->netdev; @@ -4331,11 +4216,11 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, while (staterr & E1000_RXD_STAT_DD) { ps_page = &rx_ring->ps_page[i]; ps_page_dma = &rx_ring->ps_page_dma[i]; -#ifdef CONFIG_E1000_NAPI + if (unlikely(*work_done >= work_to_do)) break; (*work_done)++; -#endif + skb = buffer_info->skb; /* in the packet split case this is header only */ @@ -4437,21 +4322,14 @@ copydone: if (likely(rx_desc->wb.upper.header_status & cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))) adapter->rx_hdr_split++; -#ifdef CONFIG_E1000_NAPI + if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, le16_to_cpu(rx_desc->wb.middle.vlan)); } else { netif_receive_skb(skb); } -#else /* CONFIG_E1000_NAPI */ - if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { - vlan_hwaccel_rx(skb, adapter->vlgrp, - le16_to_cpu(rx_desc->wb.middle.vlan)); - } else { - netif_rx(skb); - } -#endif /* CONFIG_E1000_NAPI */ + netdev->last_rx = jiffies; next_desc: @@ -5218,9 +5096,6 @@ static void e1000_netpoll(struct net_device *netdev) disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev); -#ifndef CONFIG_E1000_NAPI - adapter->clean_rx(adapter, adapter->rx_ring); -#endif enable_irq(adapter->pdev->irq); } #endif |