summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPatrice Chotard <patrice.chotard@st.com>2016-08-10 07:39:07 (GMT)
committerLee Jones <lee.jones@linaro.org>2016-08-10 08:23:33 (GMT)
commitc4dd1ba355aae2bc3d1213da6c66c53e3c31e028 (patch)
tree5d6175b5371a9010f5736c5c5ed84f95548f60cc
parent0f4be8cf637ea4637faba8a0e4bf2270287c6ba0 (diff)
downloadlinux-c4dd1ba355aae2bc3d1213da6c66c53e3c31e028.tar.xz
mfd: stmpe: Add reset support for all STMPE variant
Reset was only implemented for STMPE1801 variant despite all variant have a SOFT_RESET bit. For STMPE2401/2403/801/1601/1801 SOFT_RESET bit is bit 7 of SYS_CTRL register. For STMPE610/811 (which have the same variant id) SOFT_RESET bit is bit 1 of SYS_CTRL register. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-rw-r--r--drivers/mfd/stmpe.c23
-rw-r--r--drivers/mfd/stmpe.h7
2 files changed, 20 insertions, 10 deletions
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index c053b2b..8500525 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -756,13 +756,22 @@ static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
enable ? mask : 0);
}
-static int stmpe1801_reset(struct stmpe *stmpe)
+static int stmpe_reset(struct stmpe *stmpe)
{
+ u16 id_val = stmpe->variant->id_val;
unsigned long timeout;
int ret = 0;
+ u8 reset_bit;
+
+ if (id_val == STMPE811_ID)
+ /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */
+ reset_bit = STMPE811_SYS_CTRL_RESET;
+ else
+ /* all other STMPE variant use bit 7 of SYS_CTRL register */
+ reset_bit = STMPE_SYS_CTRL_RESET;
ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
- STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
+ reset_bit, reset_bit);
if (ret < 0)
return ret;
@@ -771,7 +780,7 @@ static int stmpe1801_reset(struct stmpe *stmpe)
ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
if (ret < 0)
return ret;
- if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
+ if (!(ret & reset_bit))
return 0;
usleep_range(100, 200);
}
@@ -1095,11 +1104,9 @@ static int stmpe_chip_init(struct stmpe *stmpe)
if (ret)
return ret;
- if (id == STMPE1801_ID) {
- ret = stmpe1801_reset(stmpe);
- if (ret < 0)
- return ret;
- }
+ ret = stmpe_reset(stmpe);
+ if (ret < 0)
+ return ret;
if (stmpe->irq >= 0) {
if (id == STMPE801_ID)
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 406f9f2..4ae343d 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -104,6 +104,8 @@ int stmpe_remove(struct stmpe *stmpe);
#define STMPE_ICR_LSB_EDGE (1 << 1)
#define STMPE_ICR_LSB_GIM (1 << 0)
+#define STMPE_SYS_CTRL_RESET (1 << 7)
+
/*
* STMPE801
*/
@@ -126,6 +128,7 @@ int stmpe_remove(struct stmpe *stmpe);
/*
* STMPE811
*/
+#define STMPE811_ID 0x0811
#define STMPE811_IRQ_TOUCH_DET 0
#define STMPE811_IRQ_FIFO_TH 1
@@ -155,6 +158,8 @@ int stmpe_remove(struct stmpe *stmpe);
#define STMPE811_REG_GPIO_FE 0x16
#define STMPE811_REG_GPIO_AF 0x17
+#define STMPE811_SYS_CTRL_RESET (1 << 1)
+
#define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
#define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
#define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
@@ -244,8 +249,6 @@ int stmpe_remove(struct stmpe *stmpe);
#define STMPE1801_REG_GPIO_PULL_UP_MID 0x23
#define STMPE1801_REG_GPIO_PULL_UP_HIGH 0x24
-#define STMPE1801_MSK_SYS_CTRL_RESET (1 << 7)
-
#define STMPE1801_MSK_INT_EN_KPC (1 << 1)
#define STMPE1801_MSK_INT_EN_GPIO (1 << 3)