Staging: wlan-ng: Remove PCI/PLX/PCMCIA files.

This portion of the driver is not needed at all, so remove it.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 0 insertions, 6310 deletions

diff --git a/drivers/staging/wlan-ng/README b/drivers/staging/wlan-ng/README
index f50e4eb..9c10dbb 100644
--- a/drivers/staging/wlan-ng/README
+++ b/drivers/staging/wlan-ng/README
@@ -3,6 +3,5 @@ TODO:
 	- sparse warnings
 	- Lindent cleanups
 	- move to use the in-kernel wireless stack
-	- possible enable the pcmcia and pci portions of the driver
 
 Please send all patches to Greg Kroah-Hartman <greg@kroah.com>
diff --git a/drivers/staging/wlan-ng/hfa384x.c b/drivers/staging/wlan-ng/hfa384x.c
deleted file mode 100644
index 04df3fd..0000000
--- a/drivers/staging/wlan-ng/hfa384x.c
+++ /dev/null
@@ -1,4018 +0,0 @@
-/* src/prism2/driver/hfa384x.c
-*
-* Implements the functions of the Intersil hfa384x MAC
-*
-* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-* --------------------------------------------------------------------
-*
-* linux-wlan
-*
-*   The contents of this file are subject to the Mozilla Public
-*   License Version 1.1 (the "License"); you may not use this file
-*   except in compliance with the License. You may obtain a copy of
-*   the License at http://www.mozilla.org/MPL/
-*
-*   Software distributed under the License is distributed on an "AS
-*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*   implied. See the License for the specific language governing
-*   rights and limitations under the License.
-*
-*   Alternatively, the contents of this file may be used under the
-*   terms of the GNU Public License version 2 (the "GPL"), in which
-*   case the provisions of the GPL are applicable instead of the
-*   above.  If you wish to allow the use of your version of this file
-*   only under the terms of the GPL and not to allow others to use
-*   your version of this file under the MPL, indicate your decision
-*   by deleting the provisions above and replace them with the notice
-*   and other provisions required by the GPL.  If you do not delete
-*   the provisions above, a recipient may use your version of this
-*   file under either the MPL or the GPL.
-*
-* --------------------------------------------------------------------
-*
-* Inquiries regarding the linux-wlan Open Source project can be
-* made directly to:
-*
-* AbsoluteValue Systems Inc.
-* info@linux-wlan.com
-* http://www.linux-wlan.com
-*
-* --------------------------------------------------------------------
-*
-* Portions of the development of this software were funded by
-* Intersil Corporation as part of PRISM(R) chipset product development.
-*
-* --------------------------------------------------------------------
-*
-* This file implements functions that correspond to the prism2/hfa384x
-* 802.11 MAC hardware and firmware host interface.
-*
-* The functions can be considered to represent several levels of
-* abstraction.  The lowest level functions are simply C-callable wrappers
-* around the register accesses.  The next higher level represents C-callable
-* prism2 API functions that match the Intersil documentation as closely
-* as is reasonable.  The next higher layer implements common sequences
-* of invokations of the API layer (e.g. write to bap, followed by cmd).
-*
-* Common sequences:
-* hfa384x_drvr_xxx	Highest level abstractions provided by the
-*			hfa384x code.  They are driver defined wrappers
-*			for common sequences.  These functions generally
-*			use the services of the lower levels.
-*
-* hfa384x_drvr_xxxconfig  An example of the drvr level abstraction. These
-*			functions are wrappers for the RID get/set
-*			sequence. They 	call copy_[to|from]_bap() and
-*			cmd_access().	These functions operate on the
-*			RIDs and buffers without validation.  The caller
-*			is responsible for that.
-*
-* API wrapper functions:
-* hfa384x_cmd_xxx	functions that provide access to the f/w commands.
-*			The function arguments correspond to each command
-*			argument, even command arguments that get packed
-*			into single registers.  These functions _just_
-*			issue the command by setting the cmd/parm regs
-*			& reading the status/resp regs.  Additional
-*			activities required to fully use a command
-*			(read/write from/to bap, get/set int status etc.)
-*			are implemented separately.  Think of these as
-*			C-callable prism2 commands.
-*
-* Lowest Layer Functions:
-* hfa384x_docmd_xxx	These functions implement the sequence required
-*			to issue any prism2 command.  Primarily used by the
-*			hfa384x_cmd_xxx functions.
-*
-* hfa384x_bap_xxx	BAP read/write access functions.
-*			Note: we usually use BAP0 for non-interrupt context
-*			 and BAP1 for interrupt context.
-*
-* hfa384x_dl_xxx	download related functions.
-*
-* Driver State Issues:
-* Note that there are two pairs of functions that manage the
-* 'initialized' and 'running' states of the hw/MAC combo.  The four
-* functions are create(), destroy(), start(), and stop().  create()
-* sets up the data structures required to support the hfa384x_*
-* functions and destroy() cleans them up.  The start() function gets
-* the actual hardware running and enables the interrupts.  The stop()
-* function shuts the hardware down.  The sequence should be:
-* create()
-*  .
-*  .  Self contained test routines can run here, particularly
-*  .  corereset() and test_hostif().
-*  .
-* start()
-*  .
-*  .  Do interesting things w/ the hardware
-*  .
-* stop()
-* destroy()
-*
-* Note that destroy() can be called without calling stop() first.
-* --------------------------------------------------------------------
-*/
-
-/*================================================================*/
-
-/* System Includes */
-#define WLAN_DBVAR	prism2_debug
-#include "version.h"
-
-
-#include <linux/version.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/wireless.h>
-#include <linux/netdevice.h>
-#include <linux/timer.h>
-#include <asm/semaphore.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <asm/byteorder.h>
-#include <linux/list.h>
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#include <linux/tqueue.h>
-#else
-#include <linux/workqueue.h>
-#endif
-
-#if (WLAN_HOSTIF == WLAN_PCMCIA)
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) )
-#include <pcmcia/version.h>
-#endif
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-#endif
-
-#if ((WLAN_HOSTIF == WLAN_PLX) || (WLAN_HOSTIF == WLAN_PCI))
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#endif
-
-#include "wlan_compat.h"
-
-// XXXX #define CMD_IRQ
-
-/*================================================================*/
-/* Project Includes */
-
-#include "p80211types.h"
-#include "p80211hdr.h"
-#include "p80211mgmt.h"
-#include "p80211conv.h"
-#include "p80211msg.h"
-#include "p80211netdev.h"
-#include "p80211req.h"
-#include "p80211metadef.h"
-#include "p80211metastruct.h"
-#include "hfa384x.h"
-#include "prism2mgmt.h"
-
-/*================================================================*/
-/* Local Constants */
-
-static const UINT16 crc16tab[256] =
-{
-	0x0000, 0xc0c1, 0xc181, 0x0140, 0xc301, 0x03c0, 0x0280, 0xc241,
-	0xc601, 0x06c0, 0x0780, 0xc741, 0x0500, 0xc5c1, 0xc481, 0x0440,
-	0xcc01, 0x0cc0, 0x0d80, 0xcd41, 0x0f00, 0xcfc1, 0xce81, 0x0e40,
-	0x0a00, 0xcac1, 0xcb81, 0x0b40, 0xc901, 0x09c0, 0x0880, 0xc841,
-	0xd801, 0x18c0, 0x1980, 0xd941, 0x1b00, 0xdbc1, 0xda81, 0x1a40,
-	0x1e00, 0xdec1, 0xdf81, 0x1f40, 0xdd01, 0x1dc0, 0x1c80, 0xdc41,
-	0x1400, 0xd4c1, 0xd581, 0x1540, 0xd701, 0x17c0, 0x1680, 0xd641,
-	0xd201, 0x12c0, 0x1380, 0xd341, 0x1100, 0xd1c1, 0xd081, 0x1040,
-	0xf001, 0x30c0, 0x3180, 0xf141, 0x3300, 0xf3c1, 0xf281, 0x3240,
-	0x3600, 0xf6c1, 0xf781, 0x3740, 0xf501, 0x35c0, 0x3480, 0xf441,
-	0x3c00, 0xfcc1, 0xfd81, 0x3d40, 0xff01, 0x3fc0, 0x3e80, 0xfe41,
-	0xfa01, 0x3ac0, 0x3b80, 0xfb41, 0x3900, 0xf9c1, 0xf881, 0x3840,
-	0x2800, 0xe8c1, 0xe981, 0x2940, 0xeb01, 0x2bc0, 0x2a80, 0xea41,
-	0xee01, 0x2ec0, 0x2f80, 0xef41, 0x2d00, 0xedc1, 0xec81, 0x2c40,
-	0xe401, 0x24c0, 0x2580, 0xe541, 0x2700, 0xe7c1, 0xe681, 0x2640,
-	0x2200, 0xe2c1, 0xe381, 0x2340, 0xe101, 0x21c0, 0x2080, 0xe041,
-	0xa001, 0x60c0, 0x6180, 0xa141, 0x6300, 0xa3c1, 0xa281, 0x6240,
-	0x6600, 0xa6c1, 0xa781, 0x6740, 0xa501, 0x65c0, 0x6480, 0xa441,
-	0x6c00, 0xacc1, 0xad81, 0x6d40, 0xaf01, 0x6fc0, 0x6e80, 0xae41,
-	0xaa01, 0x6ac0, 0x6b80, 0xab41, 0x6900, 0xa9c1, 0xa881, 0x6840,
-	0x7800, 0xb8c1, 0xb981, 0x7940, 0xbb01, 0x7bc0, 0x7a80, 0xba41,
-	0xbe01, 0x7ec0, 0x7f80, 0xbf41, 0x7d00, 0xbdc1, 0xbc81, 0x7c40,
-	0xb401, 0x74c0, 0x7580, 0xb541, 0x7700, 0xb7c1, 0xb681, 0x7640,
-	0x7200, 0xb2c1, 0xb381, 0x7340, 0xb101, 0x71c0, 0x7080, 0xb041,
-	0x5000, 0x90c1, 0x9181, 0x5140, 0x9301, 0x53c0, 0x5280, 0x9241,
-	0x9601, 0x56c0, 0x5780, 0x9741, 0x5500, 0x95c1, 0x9481, 0x5440,
-	0x9c01, 0x5cc0, 0x5d80, 0x9d41, 0x5f00, 0x9fc1, 0x9e81, 0x5e40,
-	0x5a00, 0x9ac1, 0x9b81, 0x5b40, 0x9901, 0x59c0, 0x5880, 0x9841,
-	0x8801, 0x48c0, 0x4980, 0x8941, 0x4b00, 0x8bc1, 0x8a81, 0x4a40,
-	0x4e00, 0x8ec1, 0x8f81, 0x4f40, 0x8d01, 0x4dc0, 0x4c80, 0x8c41,
-	0x4400, 0x84c1, 0x8581, 0x4540, 0x8701, 0x47c0, 0x4680, 0x8641,
-	0x8201, 0x42c0, 0x4380, 0x8341, 0x4100, 0x81c1, 0x8081, 0x4040
-};
-
-/*================================================================*/
-/* Local Macros */
-
-/*================================================================*/
-/* Local Types */
-
-/*================================================================*/
-/* Local Static Definitions */
-extern int prism2_debug;
-
-/*================================================================*/
-/* Local Function Declarations */
-
-static void	hfa384x_int_dtim(wlandevice_t *wlandev);
-static void	hfa384x_int_infdrop(wlandevice_t *wlandev);
-
-static void     hfa384x_bap_tasklet(unsigned long data);
-
-static void	hfa384x_int_info(wlandevice_t *wlandev);
-static void	hfa384x_int_txexc(wlandevice_t *wlandev);
-static void	hfa384x_int_tx(wlandevice_t *wlandev);
-static void	hfa384x_int_rx(wlandevice_t *wlandev);
-
-#ifdef CMD_IRQ
-static void	hfa384x_int_cmd(wlandevice_t *wlandev);
-#endif
-static void	hfa384x_int_rxmonitor( wlandevice_t *wlandev,
-			UINT16 rxfid, hfa384x_rx_frame_t *rxdesc);
-static void	hfa384x_int_alloc(wlandevice_t *wlandev);
-
-static int hfa384x_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd);
-
-static int hfa384x_dl_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd);
-
-static UINT16
-hfa384x_mkcrc16(UINT8 *p, int len);
-
-int hfa384x_copy_to_bap4(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
-			 void *buf, UINT len, void* buf2, UINT len2,
-			 void *buf3, UINT len3, void* buf4, UINT len4);
-
-/*================================================================*/
-/* Function Definitions */
-
-static UINT16
-txfid_queue_empty(hfa384x_t *hw)
-{
-	return (hw->txfid_head == hw->txfid_tail) ? 1 : 0;
-}
-
-static UINT16
-txfid_queue_remove(hfa384x_t *hw)
-{
-	UINT16 result= 0;
-
-	if (txfid_queue_empty(hw)) {
-		WLAN_LOG_DEBUG(3,"queue empty.\n");
-	} else {
-		result = hw->txfid_queue[hw->txfid_head];
-		hw->txfid_head = (hw->txfid_head + 1) % hw->txfid_N;
-	}
-
-	return (UINT16)result;
-}
-
-static INT16
-txfid_queue_add(hfa384x_t *hw, UINT16 val)
-{
-	INT16 result = 0;
-
-	if (hw->txfid_head == ((hw->txfid_tail + 1) % hw->txfid_N)) {
-		result = -1;
-		WLAN_LOG_DEBUG(3,"queue full.\n");
-	} else {
-		hw->txfid_queue[hw->txfid_tail] = val;
-		result = hw->txfid_tail;
-		hw->txfid_tail = (hw->txfid_tail + 1) % hw->txfid_N;
-	}
-
-	return result;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_create
-*
-* Initializes the hfa384x_t data structure for use.  Note this
-* does _not_ intialize the actual hardware, just the data structures
-* we use to keep track of its state.
-*
-* Arguments:
-*	hw		device structure
-*	irq		device irq number
-*	iobase		[pcmcia] i/o base address for register access
-*			[pci] zero
-*			[plx] i/o base address for register access
-*	membase		[pcmcia] pcmcia_cs "link" pointer
-*			[pci] memory base address for register access
-*			[plx] memory base address for card attribute memory
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-void hfa384x_create(hfa384x_t *hw, UINT irq, UINT32 iobase,
-		    UINT8 __iomem *membase)
-{
-	DBFENTER;
-	memset(hw, 0, sizeof(hfa384x_t));
-	hw->irq = irq;
-	hw->iobase = iobase;
-	hw->membase = membase;
-	spin_lock_init(&(hw->cmdlock));
-
-	/* BAP setup */
- 	spin_lock_init(&(hw->baplock));
-	tasklet_init(&hw->bap_tasklet,
-		     hfa384x_bap_tasklet,
-		     (unsigned long) hw);
-
-	init_waitqueue_head(&hw->cmdq);
-	sema_init(&hw->infofid_sem, 1);
-
-        hw->txfid_head = 0;
-        hw->txfid_tail = 0;
-        hw->txfid_N = HFA384x_DRVR_FIDSTACKLEN_MAX;
-        memset(hw->txfid_queue, 0, sizeof(hw->txfid_queue));
-
-	hw->isram16 = 1;
-
-	/* Init the auth queue head */
-	skb_queue_head_init(&hw->authq);
-
-	INIT_WORK2(&hw->link_bh, prism2sta_processing_defer);
-
-        INIT_WORK2(&hw->commsqual_bh, prism2sta_commsqual_defer);
-
-	init_timer(&hw->commsqual_timer);
-	hw->commsqual_timer.data = (unsigned long) hw;
-	hw->commsqual_timer.function = prism2sta_commsqual_timer;
-
-	hw->link_status = HFA384x_LINK_NOTCONNECTED;
-	hw->state = HFA384x_STATE_INIT;
-
-	DBFEXIT;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_destroy
-*
-* Partner to hfa384x_create().  This function cleans up the hw
-* structure so that it can be freed by the caller using a simple
-* kfree.  Currently, this function is just a placeholder.  If, at some
-* point in the future, an hw in the 'shutdown' state requires a 'deep'
-* kfree, this is where it should be done.  Note that if this function
-* is called on a _running_ hw structure, the drvr_stop() function is
-* called.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	nothing, this function is not allowed to fail.
-*
-* Side effects:
-*
-* Call context:
-*	process
-----------------------------------------------------------------*/
-void
-hfa384x_destroy( hfa384x_t *hw)
-{
-	struct sk_buff *skb;
-
-	DBFENTER;
-
-	if ( hw->state == HFA384x_STATE_RUNNING ) {
-		hfa384x_drvr_stop(hw);
-	}
-	hw->state = HFA384x_STATE_PREINIT;
-
-	if (hw->scanresults) {
-		kfree(hw->scanresults);
-		hw->scanresults = NULL;
-	}
-
-        /* Now to clean out the auth queue */
-        while ( (skb = skb_dequeue(&hw->authq)) ) {
-                dev_kfree_skb(skb);
-        }
-
-	DBFEXIT;
-	return;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_getconfig
-*
-* Performs the sequence necessary to read a config/info item.
-*
-* Arguments:
-*	hw		device structure
-*	rid		config/info record id (host order)
-*	buf		host side record buffer.  Upon return it will
-*			contain the body portion of the record (minus the
-*			RID and len).
-*	len		buffer length (in bytes, should match record length)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*	-ENODATA 	length mismatch between argument and retrieved
-*			record.
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_getconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len)
-{
-	int 		result = 0;
-	DBFENTER;
-
-	result = hfa384x_cmd_access( hw, 0, rid, buf, len);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_setconfig
-*
-* Performs the sequence necessary to write a config/info item.
-*
-* Arguments:
-*	hw		device structure
-*	rid		config/info record id (in host order)
-*	buf		host side record buffer
-*	len		buffer length (in bytes)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_setconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len)
-{
-	int		result = 0;
-	DBFENTER;
-
-	result = hfa384x_cmd_access( hw, 1, rid, buf, len);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_readpda
-*
-* Performs the sequence to read the PDA space.  Note there is no
-* drvr_writepda() function.  Writing a PDA is
-* generally implemented by a calling component via calls to
-* cmd_download and writing to the flash download buffer via the
-* aux regs.
-*
-* Arguments:
-*	hw		device structure
-*	buf		buffer to store PDA in
-*	len		buffer length
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*	-ETIMEOUT	timout waiting for the cmd regs to become
-*			available, or waiting for the control reg
-*			to indicate the Aux port is enabled.
-*	-ENODATA	the buffer does NOT contain a valid PDA.
-*			Either the card PDA is bad, or the auxdata
-*			reads are giving us garbage.
-
-*
-* Side effects:
-*
-* Call context:
-*	process thread or non-card interrupt.
-----------------------------------------------------------------*/
-int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, UINT len)
-{
-	int		result = 0;
-	UINT16		*pda = buf;
-	int		pdaok = 0;
-	int		morepdrs = 1;
-	int		currpdr = 0;	/* word offset of the current pdr */
-	int		i;
-	UINT16		pdrlen;		/* pdr length in bytes, host order */
-	UINT16		pdrcode;	/* pdr code, host order */
-	UINT16		crc;
-	UINT16		pdacrc;
-	struct pdaloc {
-		UINT32	cardaddr;
-		UINT16	auxctl;
-	} pdaloc[] =
-	{
-		{ HFA3842_PDA_BASE,		HFA384x_AUX_CTL_NV},
-		{ HFA3842_PDA_BASE,		HFA384x_AUX_CTL_EXTDS},
-		{ HFA3841_PDA_BASE,		HFA384x_AUX_CTL_NV},
-		{ HFA3841_PDA_BASE,		HFA384x_AUX_CTL_EXTDS},
-		{ HFA3841_PDA_BOGUS_BASE,	HFA384x_AUX_CTL_NV}
-	};
-
-	DBFENTER;
-	/* Check for aux available */
-	result = hfa384x_cmd_aux_enable(hw, 0);
-	if ( result ) {
-		WLAN_LOG_DEBUG(1,"aux_enable() failed. result=%d\n", result);
-		goto failed;
-	}
-
-	/* Read the pda from each known address.  */
-	for ( i = 0; i < (sizeof(pdaloc)/sizeof(pdaloc[0])); i++) {
-		WLAN_LOG_DEBUG( 3, "Checking PDA@(0x%08x,%s)\n",
-			pdaloc[i].cardaddr,
-			pdaloc[i].auxctl == HFA384x_AUX_CTL_NV ?
-			"CTL_NV" : "CTL_EXTDS");
-
-		/* Copy bufsize bytes from our current pdaloc */
-		hfa384x_copy_from_aux(hw,
-			pdaloc[i].cardaddr,
-			pdaloc[i].auxctl,
-			buf,
-			len);
-
-		/* Test for garbage */
-		/* Traverse the PDR list Looking for PDA-END */
-		pdaok = 1;	/* intially assume good */
-		morepdrs = 1;
-		currpdr = 0;
-		while ( pdaok && morepdrs ) {
-			pdrlen = hfa384x2host_16(pda[currpdr]) * 2;
-			pdrcode = hfa384x2host_16(pda[currpdr+1]);
-
-			/* Test for completion at END record */
-			if ( pdrcode == HFA384x_PDR_END_OF_PDA ) {
-				if ( pdrlen == 4 ) {
-					morepdrs = 0;
-					/* Calculate CRC-16 and compare to PDA
-					 * value.  Note the addition of 2 words
-					 * for ENDREC.len and ENDREC.code
-					 * fields.
-					 */
-					crc = hfa384x_mkcrc16( (UINT8*)pda,
-						(currpdr + 2) * sizeof(UINT16));
-					pdacrc =hfa384x2host_16(pda[currpdr+2]);
-					if ( crc != pdacrc ) {
-						WLAN_LOG_DEBUG(3,
-						"PDA crc failed:"
-						"calc_crc=0x%04x,"
-						"pdr_crc=0x%04x.\n",
-						crc, pdacrc);
-						pdaok = 0;
-					}
-				} else {
-					WLAN_LOG_DEBUG(3,
-					"END record detected w/ "
-					"len(%d) != 2, assuming bad PDA\n",
-					pdrlen);
-					pdaok = 0;
-
-				}
-				break;
-			}
-
-			/* Test the record length */
-			if ( pdrlen > HFA384x_PDR_LEN_MAX || pdrlen == 0) {
-				WLAN_LOG_DEBUG(3,
-					"pdrlen for address #%d "
-					"at %#x:%#x:%d\n",
-					i, pdaloc[i].cardaddr,
-					pdaloc[i].auxctl, pdrlen);
-				WLAN_LOG_DEBUG(3,"pdrlen invalid=%d\n",
-					pdrlen);
-				pdaok = 0;
-				break;
-			}
-
-			/* Move to the next pdr */
-			if ( morepdrs ) {
-				/* note the access to pda[], we need words */
-				currpdr += hfa384x2host_16(pda[currpdr]) + 1;
-				if (currpdr*sizeof(UINT16) > len) {
-					WLAN_LOG_DEBUG(3,
-					"Didn't find PDA_END in buffer, "
-					"trying next location.\n");
-					pdaok = 0;
-					break;
-				}
-			}
-		}
-		if ( pdaok ) {
-			WLAN_LOG_INFO(
-				"PDA Read from 0x%08x in %s space.\n",
-				pdaloc[i].cardaddr,
-				pdaloc[i].auxctl == 0 ? "EXTDS" :
-				pdaloc[i].auxctl == 1 ? "NV" :
-				pdaloc[i].auxctl == 2 ? "PHY" :
-				pdaloc[i].auxctl == 3 ? "ICSRAM" :
-				"<bogus auxctl>");
-			break;
-		}
-	}
-	result = pdaok ? 0 : -ENODATA;
-
-	if ( result ) {
-		WLAN_LOG_DEBUG(3,"Failure: pda is not okay\n");
-	}
-
-	hfa384x_cmd_aux_disable(hw);
-failed:
-	DBFEXIT;
-	return result;
-}
-
-
-
-/*----------------------------------------------------------------
-* mkpda_crc
-*
-* Calculates the CRC16 for the given PDA and inserts the value
-* into the end record.
-*
-* Arguments:
-*	pda	ptr to the PDA data structure.
-*
-* Returns:
-*	0	- success
-*	~0	- failure (probably an errno)
-----------------------------------------------------------------*/
-static UINT16
-hfa384x_mkcrc16(UINT8 *p, int len)
-{
-	UINT16	crc = 0;
-	UINT8	*lim = p + len;
-
-	while (p < lim) {
-		crc = (crc >> 8 ) ^ crc16tab[(crc & 0xff) ^ *p++];
-	}
-
-	return crc;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_ramdl_enable
-*
-* Begins the ram download state.  Checks to see that we're not
-* already in a download state and that a port isn't enabled.
-* Sets the download state and calls cmd_download with the
-* ENABLE_VOLATILE subcommand and the exeaddr argument.
-*
-* Arguments:
-*	hw		device structure
-*	exeaddr		the card execution address that will be
-*                       jumped to when ramdl_disable() is called
-*			(host order).
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_ramdl_enable(hfa384x_t *hw, UINT32 exeaddr)
-{
-	int		result = 0;
-	UINT16		lowaddr;
-	UINT16		hiaddr;
-	int		i;
-	DBFENTER;
-	/* Check that a port isn't active */
-	for ( i = 0; i < HFA384x_PORTID_MAX; i++) {
-		if ( hw->port_enabled[i] ) {
-			WLAN_LOG_DEBUG(1,"Can't download with a port enabled.\n");
-			result = -EINVAL;
-			goto done;
-		}
-	}
-
-	/* Check that we're not already in a download state */
-	if ( hw->dlstate != HFA384x_DLSTATE_DISABLED ) {
-		WLAN_LOG_DEBUG(1,"Download state not disabled.\n");
-		result = -EINVAL;
-		goto done;
-	}
-
-	/* Are we supposed to go into genesis mode? */
-	if (exeaddr == 0x3f0000) {
-		UINT16 initseq[2] = { 0xe100, 0xffa1 };
-		UINT16 readbuf[2];
-		UINT8 hcr = 0x0f; /* Default to x16 SRAM */
-		hw->isram16 = 1;
-
-		WLAN_LOG_DEBUG(1, "Dropping into Genesis mode\n");
-
-		/* Issue card reset and enable aux port */
-		hfa384x_corereset(hw, prism2_reset_holdtime,
-				  prism2_reset_settletime, 0);
-		hfa384x_cmd_aux_enable(hw, 1);
-
-		/* Genesis set */
-		hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
-				    initseq, sizeof(initseq));
-
-		hfa384x_corereset(hw, prism2_reset_holdtime,
-				  prism2_reset_settletime, hcr);
-
-		/* Validate memory config */
-		hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
-				    initseq, sizeof(initseq));
-		hfa384x_copy_from_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
-				    readbuf, sizeof(initseq));
-		WLAN_HEX_DUMP(3, "readback", readbuf, sizeof(readbuf));
-
-		if (memcmp(initseq, readbuf, sizeof(readbuf))) {
-			hcr = 0x1f; /* x8 SRAM */
-			hw->isram16 = 0;
-
-			hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
-					    initseq, sizeof(initseq));
-			hfa384x_corereset(hw, prism2_reset_holdtime,
-					  prism2_reset_settletime, hcr);
-
-			hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
-					    initseq, sizeof(initseq));
-			hfa384x_copy_from_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
-					    readbuf, sizeof(initseq));
-			WLAN_HEX_DUMP(2, "readback", readbuf, sizeof(readbuf));
-
-			if (memcmp(initseq, readbuf, sizeof(readbuf))) {
-				WLAN_LOG_ERROR("Genesis mode failed\n");
-				result = -1;
-				goto done;
-			}
-		}
-
-		/* Now we're in genesis mode */
-		hw->dlstate = HFA384x_DLSTATE_GENESIS;
-		goto done;
-	}
-
-	/* Retrieve the buffer loc&size and timeout */
-	if ( (result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DOWNLOADBUFFER,
-				&(hw->bufinfo), sizeof(hw->bufinfo))) ) {
-		goto done;
-	}
-	hw->bufinfo.page = hfa384x2host_16(hw->bufinfo.page);
-	hw->bufinfo.offset = hfa384x2host_16(hw->bufinfo.offset);
-	hw->bufinfo.len = hfa384x2host_16(hw->bufinfo.len);
-	if ( (result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_MAXLOADTIME,
-				&(hw->dltimeout))) ) {
-		goto done;
-	}
-	hw->dltimeout = hfa384x2host_16(hw->dltimeout);
-
-	/* Enable the aux port */
-	if ( (result = hfa384x_cmd_aux_enable(hw, 0)) ) {
-		WLAN_LOG_DEBUG(1,"Aux enable failed, result=%d.\n", result);
-		goto done;
-	}
-
-	/* Call the download(1,addr) function */
-	lowaddr = HFA384x_ADDR_CMD_MKOFF(exeaddr);
-	hiaddr =  HFA384x_ADDR_CMD_MKPAGE(exeaddr);
-
-	result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_RAM,
-			lowaddr, hiaddr, 0);
-	if ( result == 0) {
-		/* Set the download state */
-		hw->dlstate = HFA384x_DLSTATE_RAMENABLED;
-	} else {
-		WLAN_LOG_DEBUG(1,"cmd_download(0x%04x, 0x%04x) failed, result=%d.\n",
-				lowaddr,hiaddr, result);
-		/* Disable  the aux port */
-		hfa384x_cmd_aux_disable(hw);
-	}
-
- done:
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_ramdl_disable
-*
-* Ends the ram download state.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_ramdl_disable(hfa384x_t *hw)
-{
-	DBFENTER;
-	/* Check that we're already in the download state */
-	if ( ( hw->dlstate != HFA384x_DLSTATE_RAMENABLED ) &&
-	     ( hw->dlstate != HFA384x_DLSTATE_GENESIS ) ) {
-		return -EINVAL;
-	}
-
-	if (hw->dlstate == HFA384x_DLSTATE_GENESIS) {
-		hfa384x_corereset(hw, prism2_reset_holdtime,
-				  prism2_reset_settletime,
-				  hw->isram16 ? 0x07: 0x17);
-		goto done;
-	}
-
-	/* Disable the aux port */
-	hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0 , 0);
-
- done:
-	hw->dlstate = HFA384x_DLSTATE_DISABLED;
-	hfa384x_cmd_aux_disable(hw);
-
-	DBFEXIT;
-	return 0;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_ramdl_write
-*
-* Performs a RAM download of a chunk of data. First checks to see
-* that we're in the RAM download state, then uses the aux functions
-* to 1) copy the data, 2) readback and compare.  The download
-* state is unaffected.  When all data has been written using
-* this function, call drvr_ramdl_disable() to end the download state
-* and restart the MAC.
-*
-* Arguments:
-*	hw		device structure
-*	daddr		Card address to write to. (host order)
-*	buf		Ptr to data to write.
-*	len		Length of data (host order).
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_ramdl_write(hfa384x_t *hw, UINT32 daddr, void* buf, UINT32 len)
-{
-	int		result = 0;
-	UINT8		*verbuf;
-	DBFENTER;
-	/* Check that we're in the ram download state */
-	if ( ( hw->dlstate != HFA384x_DLSTATE_RAMENABLED ) &&
-	     ( hw->dlstate != HFA384x_DLSTATE_GENESIS ) ) {
-		return -EINVAL;
-	}
-
-	WLAN_LOG_INFO("Writing %d bytes to ram @0x%06x\n", len, daddr);
-#if 0
-WLAN_HEX_DUMP(1, "dldata", buf, len);
-#endif
-	/* Copy the data via the aux port */
-	hfa384x_copy_to_aux(hw, daddr, HFA384x_AUX_CTL_EXTDS, buf, len);
-
-	/* Create a buffer for the verify */
-	verbuf = kmalloc(len, GFP_KERNEL);
-	if (verbuf == NULL ) return 1;
-
-	/* Read back and compare */
-	hfa384x_copy_from_aux(hw, daddr, HFA384x_AUX_CTL_EXTDS, verbuf, len);
-
-	if ( memcmp(buf, verbuf, len) ) {
-		WLAN_LOG_DEBUG(1,"ramdl verify failed!\n");
-		result = -EINVAL;
-	}
-
-	kfree_s(verbuf, len);
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_flashdl_enable
-*
-* Begins the flash download state.  Checks to see that we're not
-* already in a download state and that a port isn't enabled.
-* Sets the download state and retrieves the flash download
-* buffer location, buffer size, and timeout length.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_flashdl_enable(hfa384x_t *hw)
-{
-	int		result = 0;
-	int		i;
-
-	DBFENTER;
-	/* Check that a port isn't active */
-	for ( i = 0; i < HFA384x_PORTID_MAX; i++) {
-		if ( hw->port_enabled[i] ) {
-			WLAN_LOG_DEBUG(1,"called when port enabled.\n");
-			return -EINVAL;
-		}
-	}
-
-	/* Check that we're not already in a download state */
-	if ( hw->dlstate != HFA384x_DLSTATE_DISABLED ) {
-		return -EINVAL;
-	}
-
-	/* Retrieve the buffer loc&size and timeout */
-	if ( (result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DOWNLOADBUFFER,
-				&(hw->bufinfo), sizeof(hw->bufinfo))) ) {
-		return result;
-	}
-	hw->bufinfo.page = hfa384x2host_16(hw->bufinfo.page);
-	hw->bufinfo.offset = hfa384x2host_16(hw->bufinfo.offset);
-	hw->bufinfo.len = hfa384x2host_16(hw->bufinfo.len);
-	if ( (result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_MAXLOADTIME,
-				&(hw->dltimeout))) ) {
-		return result;
-	}
-	hw->dltimeout = hfa384x2host_16(hw->dltimeout);
-
-	/* Enable the aux port */
-	if ( (result = hfa384x_cmd_aux_enable(hw, 0)) ) {
-		return result;
-	}
-
-	hw->dlstate = HFA384x_DLSTATE_FLASHENABLED;
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_flashdl_disable
-*
-* Ends the flash download state.  Note that this will cause the MAC
-* firmware to restart.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_flashdl_disable(hfa384x_t *hw)
-{
-	DBFENTER;
-	/* Check that we're already in the download state */
-	if ( hw->dlstate != HFA384x_DLSTATE_FLASHENABLED ) {
-		return -EINVAL;
-	}
-
-	/* There isn't much we can do at this point, so I don't */
-	/*  bother  w/ the return value */
-	hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0 , 0);
-	hw->dlstate = HFA384x_DLSTATE_DISABLED;
-
-	/* Disable the aux port */
-	hfa384x_cmd_aux_disable(hw);
-
-	DBFEXIT;
-	return 0;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_flashdl_write
-*
-* Performs a FLASH download of a chunk of data. First checks to see
-* that we're in the FLASH download state, then sets the download
-* mode, uses the aux functions to 1) copy the data to the flash
-* buffer, 2) sets the download 'write flash' mode, 3) readback and
-* compare.  Lather rinse, repeat as many times an necessary to get
-* all the given data into flash.
-* When all data has been written using this function (possibly
-* repeatedly), call drvr_flashdl_disable() to end the download state
-* and restart the MAC.
-*
-* Arguments:
-*	hw		device structure
-*	daddr		Card address to write to. (host order)
-*	buf		Ptr to data to write.
-*	len		Length of data (host order).
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_flashdl_write(hfa384x_t *hw, UINT32 daddr, void* buf, UINT32 len)
-{
-	int		result = 0;
-	UINT8		*verbuf;
-	UINT32		dlbufaddr;
-	UINT32		currlen;
-	UINT32		currdaddr;
-	UINT16		destlo;
-	UINT16		desthi;
-	int		nwrites;
-	int		i;
-
-	DBFENTER;
-	/* Check that we're in the flash download state */
-	if ( hw->dlstate != HFA384x_DLSTATE_FLASHENABLED ) {
-		return -EINVAL;
-	}
-
-	WLAN_LOG_INFO("Download %d bytes to flash @0x%06x\n", len, daddr);
-
-	/* Need a flat address for arithmetic */
-	dlbufaddr = HFA384x_ADDR_AUX_MKFLAT(
-			hw->bufinfo.page,
-			hw->bufinfo.offset);
-	verbuf = kmalloc(hw->bufinfo.len, GFP_KERNEL);
-
-#if 0
-WLAN_LOG_WARNING("dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr, hw->bufinfo.len, hw->dltimeout);
-#endif
-	/* Figure out how many times to to the flash prog */
-	nwrites = len / hw->bufinfo.len;
-	nwrites += (len % hw->bufinfo.len) ? 1 : 0;
-
-	if ( verbuf == NULL ) {
-		WLAN_LOG_ERROR("Failed to allocate flash verify buffer\n");
-		return 1;
-	}
-	/* For each */
-	for ( i = 0; i < nwrites; i++) {
-		/* Get the dest address and len */
-		currlen = (len - (hw->bufinfo.len * i)) > hw->bufinfo.len ?
-				hw->bufinfo.len :
-				(len - (hw->bufinfo.len * i));
-		currdaddr = daddr + (hw->bufinfo.len * i);
-		destlo = HFA384x_ADDR_CMD_MKOFF(currdaddr);
-		desthi = HFA384x_ADDR_CMD_MKPAGE(currdaddr);
-		WLAN_LOG_INFO("Writing %d bytes to flash @0x%06x\n", currlen, currdaddr);
-#if 0
-WLAN_HEX_DUMP(1, "dldata", buf+(hw->bufinfo.len*i), currlen);
-#endif
-		/* Set the download mode */
-		result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NV,
-				destlo, desthi, currlen);
-		if ( result ) {
-			WLAN_LOG_ERROR("download(NV,lo=%x,hi=%x,len=%x) "
-				"cmd failed, result=%d. Aborting d/l\n",
-				destlo, desthi, currlen, result);
-			goto exit_proc;
-		}
-		/* copy the data to the flash buffer */
-		hfa384x_copy_to_aux(hw, dlbufaddr, HFA384x_AUX_CTL_EXTDS,
-					buf+(hw->bufinfo.len*i), currlen);
-		/* set the download 'write flash' mode */
-		result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NVWRITE, 0,0,0);
-		if ( result ) {
-			WLAN_LOG_ERROR(
-				"download(NVWRITE,lo=%x,hi=%x,len=%x) "
-				"cmd failed, result=%d. Aborting d/l\n",
-				destlo, desthi, currlen, result);
-			goto exit_proc;
-		}
-		/* readback and compare, if fail...bail */
-		hfa384x_copy_from_aux(hw,
-				currdaddr, HFA384x_AUX_CTL_NV,
-				verbuf, currlen);
-
-		if ( memcmp(buf+(hw->bufinfo.len*i), verbuf, currlen) ) {
-			return -EINVAL;
-		}
-	}
-
-exit_proc:
-         /* DOH! This kfree's for you Mark :-) My forehead hurts... */
-         kfree(verbuf);
-
-	/* Leave the firmware in the 'post-prog' mode.  flashdl_disable will */
-	/*  actually disable programming mode.  Remember, that will cause the */
-	/*  the firmware to effectively reset itself. */
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_initialize
-*
-* Issues the initialize command and sets the hw->state based
-* on the result.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_initialize(hfa384x_t *hw)
-{
-	int result = 0;
-	int i;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	/* we don't want to be interrupted during the reset */
-	hfa384x_setreg(hw, 0, HFA384x_INTEN);
-	hfa384x_setreg(hw, 0xffff, HFA384x_EVACK);
-
-	cmd.cmd = HFA384x_CMDCODE_INIT;
-	cmd.parm0 = 0;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	if ( result == 0 ) {
-		for ( i = 0; i < HFA384x_NUMPORTS_MAX; i++) {
-			hw->port_enabled[i] = 0;
-		}
-	}
-
-        hw->link_status = HFA384x_LINK_NOTCONNECTED;
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_commtallies
-*
-* Send a commtallies inquiry to the MAC.  Note that this is an async
-* call that will result in an info frame arriving sometime later.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	zero		success.
-*
-* Side effects:
-*
-* Call context:
-*	process
-----------------------------------------------------------------*/
-int hfa384x_drvr_commtallies( hfa384x_t *hw )
-{
-	hfa384x_metacmd_t cmd;
-	int result;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMDCODE_INQ;
-	cmd.parm0 = HFA384x_IT_COMMTALLIES;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_enable
-*
-* Issues the enable command to enable communications on one of
-* the MACs 'ports'.  Only macport 0 is valid  for stations.
-* APs may also enable macports 1-6.  Only ports that are currently
-* disabled may be enabled.
-*
-* Arguments:
-*	hw		device structure
-*	macport		MAC port number
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_enable(hfa384x_t *hw, UINT16 macport)
-{
-	int	result = 0;
-
-	DBFENTER;
-	if ((!hw->isap && macport != 0) ||
-	    (hw->isap && !(macport <= HFA384x_PORTID_MAX)) ||
-	    (hw->port_enabled[macport]) ){
-		result = -EINVAL;
-	} else {
-		result = hfa384x_cmd_enable(hw, macport);
-		if ( result == 0 ) {
-			hw->port_enabled[macport] = 1;
-		}
-	}
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_enable
-*
-* Issues the the enable command to enable communications on one of the
-* MACs 'ports'.
-*
-* Arguments:
-*	hw		device structure
-*	macport		MAC port number
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_enable(hfa384x_t *hw, UINT16 macport)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
-		  HFA384x_CMD_MACPORT_SET(macport);
-	cmd.parm0 = 0;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_disable
-*
-* Issues the disable command to stop communications on one of
-* the MACs 'ports'.  Only macport 0 is valid  for stations.
-* APs may also disable macports 1-6.  Only ports that have been
-* previously enabled may be disabled.
-*
-* Arguments:
-*	hw		device structure
-*	macport		MAC port number (host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_disable(hfa384x_t *hw, UINT16 macport)
-{
-	int	result = 0;
-
-	DBFENTER;
-	if ((!hw->isap && macport != 0) ||
-	    (hw->isap && !(macport <= HFA384x_PORTID_MAX)) ||
-	    !(hw->port_enabled[macport]) ){
-		result = -EINVAL;
-	} else {
-		result = hfa384x_cmd_disable(hw, macport);
-		if ( result == 0 ) {
-			hw->port_enabled[macport] = 0;
-		}
-	}
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_disable
-*
-* Issues the command to disable a port.
-*
-* Arguments:
-*	hw		device structure
-*	macport		MAC port number (host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_disable(hfa384x_t *hw, UINT16 macport)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
-		  HFA384x_CMD_MACPORT_SET(macport);
-	cmd.parm0 = 0;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_diagnose
-*
-* Issues the diagnose command to test the: register interface,
-* MAC controller (including loopback), External RAM, Non-volatile
-* memory integrity, and synthesizers.  Following execution of this
-* command, MAC/firmware are in the 'initial state'.  Therefore,
-* the Initialize command should be issued after successful
-* completion of this command.  This function may only be called
-* when the MAC is in the 'communication disabled' state.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-#define DIAG_PATTERNA ((UINT16)0xaaaa)
-#define DIAG_PATTERNB ((UINT16)0x5555)
-
-int hfa384x_cmd_diagnose(hfa384x_t *hw)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DIAG);
-	cmd.parm0 = DIAG_PATTERNA;
-	cmd.parm1 = DIAG_PATTERNB;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_allocate
-*
-* Issues the allocate command instructing the firmware to allocate
-* a 'frame structure buffer' in MAC controller RAM.  This command
-* does not provide the result, it only initiates one of the f/w's
-* asynchronous processes to construct the buffer.  When the
-* allocation is complete, it will be indicated via the Alloc
-* bit in the EvStat register and the FID identifying the allocated
-* space will be available from the AllocFID register.  Some care
-* should be taken when waiting for the Alloc event.  If a Tx or
-* Notify command w/ Reclaim has been previously executed, it's
-* possible the first Alloc event after execution of this command
-* will be for the reclaimed buffer and not the one you asked for.
-* This case must be handled in the Alloc event handler.
-*
-* Arguments:
-*	hw		device structure
-*	len		allocation length, must be an even value
-*			in the range [4-2400]. (host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_allocate(hfa384x_t *hw, UINT16 len)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	if ( (len % 2) ||
-	     len < HFA384x_CMD_ALLOC_LEN_MIN ||
-	     len > HFA384x_CMD_ALLOC_LEN_MAX ) {
-		result = -EINVAL;
-	} else {
-		cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ALLOC);
-		cmd.parm0 = len;
-		cmd.parm1 = 0;
-		cmd.parm2 = 0;
-
-		spin_lock_bh(&hw->cmdlock);
-		result = hfa384x_docmd_wait(hw, &cmd);
-		spin_unlock_bh(&hw->cmdlock);
-	}
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_transmit
-*
-* Instructs the firmware to transmit a frame previously copied
-* to a given buffer.  This function returns immediately, the Tx
-* results are available via the Tx or TxExc events (if the frame
-* control bits are set).  The reclaim argument specifies if the
-* FID passed will be used by the f/w tx process or returned for
-* use w/ another transmit command.  If reclaim is set, expect an
-* Alloc event signalling the availibility of the FID for reuse.
-*
-* NOTE: hw->cmdlock MUST BE HELD before calling this function!
-*
-* Arguments:
-*	hw		device structure
-*	reclaim		[0|1] indicates whether the given FID will
-*			be handed back (via Alloc event) for reuse.
-*			(host order)
-*	qos		[0-3] Value to put in the QoS field of the
-*			tx command, identifies a queue to place the
-*			outgoing frame in.
-*			(host order)
-*	fid		FID of buffer containing the frame that was
-*			previously copied to MAC memory via the bap.
-*			(host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*	hw->resp0 will contain the FID being used by async tx
-*	process.  If reclaim==0, resp0 will be the same as the fid
-*	argument.  If reclaim==1, resp0 will be the different and
-*	is the value to watch for in the Tx|TxExc to indicate completion
-*	of the frame passed in fid.
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_transmit(hfa384x_t *hw, UINT16 reclaim, UINT16 qos, UINT16 fid)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_TX) |
-		HFA384x_CMD_RECL_SET(reclaim) |
-		HFA384x_CMD_QOS_SET(qos);
-	cmd.parm0 = fid;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_clearpersist
-*
-* Instructs the firmware to clear the persistence bit in a given
-* FID.  This has the effect of telling the firmware to drop the
-* persistent frame.  The FID must be one that was previously used
-* to transmit a PRST frame.
-*
-* Arguments:
-*	hw		device structure
-*	fid		FID of the persistent frame (host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_clearpersist(hfa384x_t *hw, UINT16 fid)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_CLRPRST);
-	cmd.parm0 = fid;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_notify
-*
-* Sends an info frame to the firmware to alter the behavior
-* of the f/w asynch processes.  Can only be called when the MAC
-* is in the enabled state.
-*
-* Arguments:
-*	hw		device structure
-*	reclaim		[0|1] indicates whether the given FID will
-*			be handed back (via Alloc event) for reuse.
-*			(host order)
-*	fid		FID of buffer containing the frame that was
-*			previously copied to MAC memory via the bap.
-*			(host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*	hw->resp0 will contain the FID being used by async notify
-*	process.  If reclaim==0, resp0 will be the same as the fid
-*	argument.  If reclaim==1, resp0 will be the different.
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_notify(hfa384x_t *hw, UINT16 reclaim, UINT16 fid,
-		       void *buf, UINT16 len)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_NOTIFY) |
-		HFA384x_CMD_RECL_SET(reclaim);
-	cmd.parm0 = fid;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-
-        /* Copy the record to FID */
-        result = hfa384x_copy_to_bap(hw, HFA384x_BAP_PROC, hw->infofid, 0, buf, len);
-        if ( result ) {
-                WLAN_LOG_DEBUG(1,
-			"copy_to_bap(%04x, 0, %d) failed, result=0x%x\n",
-                        hw->infofid, len, result);
-		result = -EIO;
-                goto failed;
-        }
-
-	result = hfa384x_docmd_wait(hw, &cmd);
-
- failed:
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-#if 0
-/*----------------------------------------------------------------
-* hfa384x_cmd_inquiry
-*
-* Requests an info frame from the firmware.  The info frame will
-* be delivered asynchronously via the Info event.
-*
-* Arguments:
-*	hw		device structure
-*	fid		FID of the info frame requested. (host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-static int hfa384x_cmd_inquiry(hfa384x_t *hw, UINT16 fid)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_INQ);
-	cmd.parm0 = fid;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-#endif
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_access
-*
-* Requests that a given record be copied to/from the record
-* buffer.  If we're writing from the record buffer, the contents
-* must previously have been written to the record buffer via the
-* bap.  If we're reading into the record buffer, the record can
-* be read out of the record buffer after this call.
-*
-* Arguments:
-*	hw		device structure
-*	write		[0|1] copy the record buffer to the given
-*			configuration record. (host order)
-*	rid		RID of the record to read/write. (host order)
-*	buf		host side record buffer.  Upon return it will
-*			contain the body portion of the record (minus the
-*			RID and len).
-*	len		buffer length (in bytes, should match record length)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_access(hfa384x_t *hw, UINT16 write, UINT16 rid,
-		       void* buf, UINT16 len)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-	hfa384x_rec_t	rec;
-
-	DBFENTER;
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))
-	/* This should NOT be called in interrupt context! */
-	if (in_irq()) {
-		WLAN_LOG_ERROR("Krap, in Interrupt context!");
-#ifdef WLAN_INCLUDE_DEBUG
-		BUG();
-#endif
-	}
-#endif
-	spin_lock_bh(&hw->cmdlock);
-
-	if (write) {
-		rec.rid = host2hfa384x_16(rid);
-		rec.reclen = host2hfa384x_16((len/2) + 1); /* note conversion to words, +1 for rid field */
-		/* write the record */
-		result = hfa384x_copy_to_bap4( hw, HFA384x_BAP_PROC, rid, 0,
-					       &rec, sizeof(rec),
-					       buf, len,
-					       NULL, 0, NULL, 0);
-		if ( result ) {
-			WLAN_LOG_DEBUG(3,"Failure writing record header+data\n");
-			goto fail;
-		}
-
-	}
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ACCESS) |
-		HFA384x_CMD_WRITE_SET(write);
-	cmd.parm0 = rid;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	result = hfa384x_docmd_wait(hw, &cmd);
-	if ( result ) {
-		WLAN_LOG_ERROR("Call to hfa384x_docmd_wait failed (%d %d)\n",
-				result, cmd.result.resp0);
-		goto fail;
-	}
-
-	if (!write) {
-		result = hfa384x_copy_from_bap( hw, HFA384x_BAP_PROC, rid, 0, &rec, sizeof(rec));
-		if ( result ) {
-			WLAN_LOG_DEBUG(3,"Call to hfa384x_copy_from_bap failed\n");
-			goto fail;
-		}
-
-		/* Validate the record length */
-		if ( ((hfa384x2host_16(rec.reclen)-1)*2) != len ) {  /* note body len calculation in bytes */
-			WLAN_LOG_DEBUG(1, "RID len mismatch, rid=0x%04x hlen=%d fwlen=%d\n",
-					rid, len, (hfa384x2host_16(rec.reclen)-1)*2);
-			result = -ENODATA;
-			goto fail;
-		}
-
-		result = hfa384x_copy_from_bap( hw, HFA384x_BAP_PROC, rid, sizeof(rec), buf, len);
-
-	}
-
- fail:
-	spin_unlock_bh(&hw->cmdlock);
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_monitor
-*
-* Enables the 'monitor mode' of the MAC.  Here's the description of
-* monitor mode that I've received thus far:
-*
-*  "The "monitor mode" of operation is that the MAC passes all
-*  frames for which the PLCP checks are correct. All received
-*  MPDUs are passed to the host with MAC Port = 7, with a
-*  receive status of good, FCS error, or undecryptable. Passing
-*  certain MPDUs is a violation of the 802.11 standard, but useful
-*  for a debugging tool."  Normal communication is not possible
-*  while monitor mode is enabled.
-*
-* Arguments:
-*	hw		device structure
-*	enable		a code (0x0b|0x0f) that enables/disables
-*			monitor mode. (host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_monitor(hfa384x_t *hw, UINT16 enable)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
-		HFA384x_CMD_AINFO_SET(enable);
-	cmd.parm0 = 0;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_download
-*
-* Sets the controls for the MAC controller code/data download
-* process.  The arguments set the mode and address associated
-* with a download.  Note that the aux registers should be enabled
-* prior to setting one of the download enable modes.
-*
-* Arguments:
-*	hw		device structure
-*	mode		0 - Disable programming and begin code exec
-*			1 - Enable volatile mem programming
-*			2 - Enable non-volatile mem programming
-*			3 - Program non-volatile section from NV download
-*			    buffer.
-*			(host order)
-*	lowaddr
-*	highaddr	For mode 1, sets the high & low order bits of
-*			the "destination address".  This address will be
-*			the execution start address when download is
-*			subsequently disabled.
-*			For mode 2, sets the high & low order bits of
-*			the destination in NV ram.
-*			For modes 0 & 3, should be zero. (host order)
-*			NOTE: these address args are in CMD format
-*	codelen		Length of the data to write in mode 2,
-*			zero otherwise. (host order)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_download(hfa384x_t *hw, UINT16 mode, UINT16 lowaddr,
-				UINT16 highaddr, UINT16 codelen)
-{
-	int	result = 0;
-	hfa384x_metacmd_t cmd;
-
-	DBFENTER;
-
-	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DOWNLD) |
-		HFA384x_CMD_PROGMODE_SET(mode);
-	cmd.parm0 = lowaddr;
-	cmd.parm1 = highaddr;
-	cmd.parm2 = codelen;
-
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_dl_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_aux_enable
-*
-* Goes through the process of enabling the auxilary port.  This
-* is necessary prior to raw reads/writes to card data space.
-* Direct access to the card data space is only used for downloading
-* code and debugging.
-* Note that a call to this function is required before attempting
-* a download.
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_aux_enable(hfa384x_t *hw, int force)
-{
-	int		result = -ETIMEDOUT;
-	unsigned long	flags;
-	UINT32		retries_remaining;
-	UINT16		reg;
-	UINT		auxen_mirror = hw->auxen;
-
-	DBFENTER;
-
-	/* Check for existing enable */
-	if ( hw->auxen ) {
-		hw->auxen++;
-		return 0;
-	}
-
-	/* acquire the lock */
-	spin_lock_irqsave( &(hw->cmdlock), flags);
-	/* wait for cmd register busy bit to clear */
-	retries_remaining = 100000;
-	do {
-		reg = hfa384x_getreg(hw, HFA384x_CMD);
-		udelay(10);
-	}
-	while (HFA384x_CMD_ISBUSY(reg) && --retries_remaining);
-	if (retries_remaining != 0) {
-		/* busy bit clear, it's OK to write to ParamX regs */
-		hfa384x_setreg(hw, HFA384x_AUXPW0,
-			HFA384x_PARAM0);
-		hfa384x_setreg(hw, HFA384x_AUXPW1,
-			HFA384x_PARAM1);
-		hfa384x_setreg(hw, HFA384x_AUXPW2,
-			HFA384x_PARAM2);
-
-		/* Set the aux enable in the Control register */
-		hfa384x_setreg(hw, HFA384x_CONTROL_AUX_DOENABLE,
-			HFA384x_CONTROL);
-
-		/* Now wait for completion */
-		retries_remaining = 100000;
-		do {
-			reg = hfa384x_getreg(hw, HFA384x_CONTROL);
-			udelay(10);
-		}
-		while ( ((reg & (BIT14|BIT15)) != HFA384x_CONTROL_AUX_ISENABLED) &&
-			--retries_remaining );
-		if (retries_remaining != 0) {
-			result = 0;
-			hw->auxen++;
-		}
-	}
-
-	/* Force it enabled even if the command failed, if told.. */
-	if ((hw->auxen == auxen_mirror) && force)
-		hw->auxen++;
-
-	spin_unlock_irqrestore( &(hw->cmdlock), flags);
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_aux_disable
-*
-* Goes through the process of disabling the auxilary port
-* enabled with aux_enable().
-*
-* Arguments:
-*	hw		device structure
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - f/w status code
-*	<0		driver reported error (timeout)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_cmd_aux_disable(hfa384x_t *hw)
-{
-	int		result = -ETIMEDOUT;
-	unsigned long   timeout;
-	UINT16		reg = 0;
-
-	DBFENTER;
-
-	/* See if there's more than one enable */
-	if (hw->auxen) hw->auxen--;
-	if (hw->auxen) return 0;
-
-	/* Clear the aux enable in the Control register */
-	hfa384x_setreg(hw, 0, HFA384x_PARAM0);
-	hfa384x_setreg(hw, 0, HFA384x_PARAM1);
-	hfa384x_setreg(hw, 0, HFA384x_PARAM2);
-	hfa384x_setreg(hw, HFA384x_CONTROL_AUX_DODISABLE,
-		HFA384x_CONTROL);
-
-	/* Now wait for completion */
-	timeout = jiffies + 1*HZ;
-	reg = hfa384x_getreg(hw, HFA384x_CONTROL);
-	while ( ((reg & (BIT14|BIT15)) != HFA384x_CONTROL_AUX_ISDISABLED) &&
-		time_before(jiffies,timeout) ){
-		udelay(10);
-		reg = hfa384x_getreg(hw, HFA384x_CONTROL);
-	}
-	if ((reg & (BIT14|BIT15)) == HFA384x_CONTROL_AUX_ISDISABLED ) {
-		result = 0;
-	}
-	DBFEXIT;
-	return result;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_low_level
-*
-* Write test commands to the card.  Some test commands don't make
-* sense without prior set-up.  For example, continous TX isn't very
-* useful until you set the channel.  That functionality should be
-*
-* Side effects:
-*
-* Call context:
-*      process thread
-* -----------------------------------------------------------------*/
-int hfa384x_drvr_low_level(hfa384x_t *hw, hfa384x_metacmd_t *cmd)
-{
-	int             result = 0;
-	DBFENTER;
-
-	/* Do i need a host2hfa... conversion ? */
-#if 0
-	printk(KERN_INFO "%#x %#x %#x %#x\n", cmd->cmd, cmd->parm0, cmd->parm1, cmd->parm2);
-#endif
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-
-/* TODO: determine if these will ever be needed */
-#if 0
-int hfa384x_cmd_readmif(hfa384x_t *hw)
-{
-	DBFENTER;
-	DBFEXIT;
-	return 0;
-}
-
-
-int hfa384x_cmd_writemif(hfa384x_t *hw)
-{
-	DBFENTER;
-	DBFEXIT;
-	return 0;
-}
-#endif
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_mmi_read
-*
-* Read mmi registers.  mmi is intersil-speak for the baseband
-* processor registers.
-*
-* Arguments:
-*       hw              device structure
-*       register        The test register to be accessed (must be even #).
-*
-* Returns:
-*       0               success
-*       >0              f/w reported error - f/w status code
-*       <0              driver reported error
-*
-* Side effects:
-*
-* Call context:
-*       process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_mmi_read(hfa384x_t *hw, UINT32 addr, UINT32 *resp)
-{
-        int             result = 0;
-	hfa384x_metacmd_t cmd;
-
-        DBFENTER;
-	cmd.cmd = (UINT16) 0x30;
-	cmd.parm0 = (UINT16) addr;
-	cmd.parm1 = 0;
-	cmd.parm2 = 0;
-
-        /* Do i need a host2hfa... conversion ? */
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-	*resp = (UINT32) cmd.result.resp0;
-
-        DBFEXIT;
-        return result;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_mmi_write
-*
-* Read mmi registers.  mmi is intersil-speak for the baseband
-* processor registers.
-*
-* Arguments:
-*       hw              device structure
-*       addr            The test register to be accessed (must be even #).
-*       data            The data value to write to the register.
-*
-* Returns:
-*       0               success
-*       >0              f/w reported error - f/w status code
-*       <0              driver reported error
-*
-* Side effects:
-*
-* Call context:
-*       process thread
-----------------------------------------------------------------*/
-
-int
-hfa384x_drvr_mmi_write(hfa384x_t *hw, UINT32 addr, UINT32 data)
-{
-        int             result = 0;
-	hfa384x_metacmd_t cmd;
-
-        DBFENTER;
-	cmd.cmd = (UINT16) 0x31;
-	cmd.parm0 = (UINT16) addr;
-	cmd.parm1 = (UINT16) data;
-	cmd.parm2 = 0;
-
-        WLAN_LOG_DEBUG(1,"mmi write : addr = 0x%08x\n", addr);
-        WLAN_LOG_DEBUG(1,"mmi write : data = 0x%08x\n", data);
-
-        /* Do i need a host2hfa... conversion ? */
-	spin_lock_bh(&hw->cmdlock);
-	result = hfa384x_docmd_wait(hw, &cmd);
-	spin_unlock_bh(&hw->cmdlock);
-
-        DBFEXIT;
-        return result;
-}
-
-
-/* TODO: determine if these will ever be needed */
-#if 0
-int hfa384x_cmd_readmif(hfa384x_t *hw)
-{
-        DBFENTER;
-        DBFEXIT;
-        return 0;
-}
-
-
-int hfa384x_cmd_writemif(hfa384x_t *hw)
-{
-        DBFENTER;
-        DBFEXIT;
-        return 0;
-}
-#endif
-
-
-
-/*----------------------------------------------------------------
-* hfa384x_copy_from_bap
-*
-* Copies a collection of bytes from the MAC controller memory via
-* one set of BAP registers.
-*
-* Arguments:
-*	hw		device structure
-*	bap		[0|1] which BAP to use
-*	id		FID or RID, destined for the select register (host order)
-*	offset		An _even_ offset into the buffer for the given
-*			FID/RID.  We haven't the means to validate this,
-*			so be careful. (host order)
-*	buf		ptr to array of bytes
-*	len		length of data to transfer in bytes
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - value of offset reg.
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-*	interrupt
-----------------------------------------------------------------*/
-int hfa384x_copy_from_bap(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
-				void *buf, UINT len)
-{
-	int		result = 0;
-	unsigned long	flags = 0;
-	UINT8		*d = (UINT8*)buf;
-	UINT		selectreg;
-	UINT		offsetreg;
-	UINT		datareg;
-	UINT		i;
-	UINT16		reg = 0;
-
-	DBFENTER;
-
-	/* Validate bap, offset, buf, and len */
-	if ( (bap > 1) ||
-	     (offset > HFA384x_BAP_OFFSET_MAX) ||
-	     (offset % 2) ||
-	     (buf == NULL) ||
-	     (len > HFA384x_BAP_DATALEN_MAX) ){
-	     	result = -EINVAL;
-	} else {
-		selectreg = (bap == 1) ?  HFA384x_SELECT1 : HFA384x_SELECT0 ;
-		offsetreg = (bap == 1) ?  HFA384x_OFFSET1 : HFA384x_OFFSET0 ;
-		datareg =   (bap == 1) ?  HFA384x_DATA1 : HFA384x_DATA0 ;
-
-		/* Obtain lock */
-		spin_lock_irqsave( &(hw->baplock), flags);
-
-		/* Write id to select reg */
-		hfa384x_setreg(hw, id, selectreg);
-		/* Write offset to offset reg */
-		hfa384x_setreg(hw, offset, offsetreg);
-		/* Wait for offset[busy] to clear (see BAP_TIMEOUT) */
-		i = 0;
-		do {
-			reg = hfa384x_getreg(hw, offsetreg);
-			if ( i > 0 ) udelay(10);
-			i++;
-		} while ( i < prism2_bap_timeout && HFA384x_OFFSET_ISBUSY(reg));
-#if (WLAN_HOSTIF != WLAN_PCI)
-		/* Release lock */
-		spin_unlock_irqrestore( &(hw->baplock), flags);
-#endif
-
-		if ( HFA384x_OFFSET_ISBUSY(reg) ){
-			/* If timeout, return -ETIMEDOUT */
-			result = reg;
-		} else if ( HFA384x_OFFSET_ISERR(reg) ){
-			/* If offset[err] == 1, return -EINVAL */
-			result = reg;
-		} else {
-			/* Read even(len) buf contents from data reg */
-			for ( i = 0; i < (len & 0xfffe); i+=2 ) {
-				*(UINT16*)(&(d[i])) =
-					hfa384x_getreg_noswap(hw, datareg);
-			}
-			/* If len odd, handle last byte */
-			if ( len % 2 ){
-				reg = hfa384x_getreg_noswap(hw, datareg);
-				d[len-1] = ((UINT8*)(&reg))[0];
-			}
-		}
-
-		/* According to Intersil errata dated 9/16/02:
-
-		"In PRISM PCI MAC host interface, if both BAPs are concurrently
-		 requesing memory access, both will accept the Ack.   There is no
-		 firmware workaround possible.  To prevent BAP access failures or
-		 hang conditions the host MUST NOT access both BAPs in sucession
-		 unless at least 5us elapses between accesses.  The safest choice
-		 is to USE ONLY ONE BAP for all data movement operations."
-
-		 What this means:
-
-		 We have to serialize ALL BAP accesses, and furthermore, add a 5us
-		 delay after access if we're using a PCI platform.
-
-		 Unfortunately, this means we have to lock out interrupts througout
-		 the entire BAP copy.
-
-		 It remains to be seen if "BAP access" means "BAP setup" or the more
-		 literal definition of "copying data back and forth"  I'm erring for
-		 the latter, safer definition.  -- SLP.
-
-		*/
-
-#if (WLAN_HOSTIF == WLAN_PCI)
-		udelay(5);
-		/* Release lock */
-		spin_unlock_irqrestore( &(hw->baplock), flags);
-#endif
-
-	}
-
-	if (result) {
-	  WLAN_LOG_DEBUG(1,
-			  "copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
-			  reg, len, result);
-	}
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_copy_to_bap
-*
-* Copies a collection of bytes to the MAC controller memory via
-* one set of BAP registers.
-*
-* Arguments:
-*	hw		device structure
-*	bap		[0|1] which BAP to use
-*	id		FID or RID, destined for the select register (host order)
-*	offset		An _even_ offset into the buffer for the given
-*			FID/RID.  We haven't the means to validate this,
-*			so be careful. (host order)
-*	buf		ptr to array of bytes
-*	len		length of data to transfer (in bytes)
-*
-* Returns:
-*	0		success
-*	>0		f/w reported failure - value of offset reg.
-*	<0		driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-*	interrupt
-----------------------------------------------------------------*/
-int hfa384x_copy_to_bap(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
-				void *buf, UINT len)
-{
-	return hfa384x_copy_to_bap4(hw, bap, id, offset, buf, len, NULL, 0, NULL, 0, NULL, 0);
-}
-
-int hfa384x_copy_to_bap4(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
-			 void *buf, UINT len1, void* buf2, UINT len2,
-			 void *buf3, UINT len3, void *buf4, UINT len4)
-{
-	int		result = 0;
-	unsigned long	flags = 0;
-	UINT8		*d;
-	UINT		selectreg;
-	UINT		offsetreg;
-	UINT		datareg;
-	UINT		i;
-	UINT16		reg;
-
-	DBFENTER;
-
-//	printk(KERN_DEBUG "ctb1 %d id %04x o %d %d %d %d %d\n", bap, id, offset, len1, len2, len3, len4);
-
-	/* Validate bap, offset, buf, and len */
-	if ( (bap > 1) ||
-	     (offset > HFA384x_BAP_OFFSET_MAX) ||
-	     (offset % 2) ||
-	     (buf == NULL) ||
-	     (len1+len2+len3+len4 > HFA384x_BAP_DATALEN_MAX) ){
-	     	result = -EINVAL;
-	} else {
-		selectreg = (bap == 1) ? HFA384x_SELECT1 : HFA384x_SELECT0;
-		offsetreg = (bap == 1) ? HFA384x_OFFSET1 : HFA384x_OFFSET0;
-		datareg =   (bap == 1) ? HFA384x_DATA1   : HFA384x_DATA0;
-		/* Obtain lock */
-		spin_lock_irqsave( &(hw->baplock), flags);
-
-		/* Write id to select reg */
-		hfa384x_setreg(hw, id, selectreg);
-		udelay(10);
-		/* Write offset to offset reg */
-		hfa384x_setreg(hw, offset, offsetreg);
-		/* Wait for offset[busy] to clear (see BAP_TIMEOUT) */
-		i = 0;
-		do {
-			reg = hfa384x_getreg(hw, offsetreg);
-			if ( i > 0 ) udelay(10);
-			i++;
-		} while ( i < prism2_bap_timeout && HFA384x_OFFSET_ISBUSY(reg));
-
-#if (WLAN_HOSTIF != WLAN_PCI)
-		/* Release lock */
-		spin_unlock_irqrestore( &(hw->baplock), flags);
-#endif
-
-		if ( HFA384x_OFFSET_ISBUSY(reg) ){
-			/* If timeout, return reg */
-			result = reg;
-		} else if ( HFA384x_OFFSET_ISERR(reg) ){
-			/* If offset[err] == 1, return reg */
-			result = reg;
-		} else {
-			d = (UINT8*)buf;
-			/* Write even(len1) buf contents to data reg */
-			for ( i = 0; i < (len1 & 0xfffe); i+=2 ) {
-				hfa384x_setreg_noswap(hw,
-					*(UINT16*)(&(d[i])), datareg);
-			}
-			if (len1 & 1) {
-				UINT16 data;
-				UINT8 *b = (UINT8 *) &data;
-				b[0] = d[len1-1];
-				if (buf2 != NULL) {
-					d = (UINT8*)buf2;
-					b[1] = d[0];
-					len2--;
-					buf2++;
-				}
-				hfa384x_setreg_noswap(hw, data, datareg);
-			}
-			if ((buf2 != NULL) && (len2 > 0)) {
-				/* Write even(len2) buf contents to data reg */
-				d = (UINT8*)buf2;
-				for ( i = 0; i < (len2 & 0xfffe); i+=2 ) {
-					hfa384x_setreg_noswap(hw, *(UINT16*)(&(d[i])), datareg);
-				}
-				if (len2 & 1) {
-					UINT16 data;
-					UINT8 *b = (UINT8 *) &data;
-					b[0] = d[len2-1];
-					if (buf3 != NULL) {
-						d = (UINT8*)buf3;
-						b[1] = d[0];
-						len3--;
-						buf3++;
-					}
-					hfa384x_setreg_noswap(hw, data, datareg);
-				}
-			}
-
-			if ((buf3 != NULL) && (len3 > 0)) {
-				/* Write even(len3) buf contents to data reg */
-				d = (UINT8*)buf3;
-				for ( i = 0; i < (len3 & 0xfffe); i+=2 ) {
-					hfa384x_setreg_noswap(hw, *(UINT16*)(&(d[i])), datareg);
-				}
-				if (len3 & 1) {
-					UINT16 data;
-					UINT8 *b = (UINT8 *) &data;
-					b[0] = d[len3-1];
-					if (buf4 != NULL) {
-						d = (UINT8*)buf4;
-						b[1] = d[0];
-						len4--;
-						buf4++;
-					}
-					hfa384x_setreg_noswap(hw, data, datareg);
-				}
-			}
-			if ((buf4 != NULL) && (len4 > 0)) {
-				/* Write even(len4) buf contents to data reg */
-				d = (UINT8*)buf4;
-				for ( i = 0; i < (len4 & 0xfffe); i+=2 ) {
-					hfa384x_setreg_noswap(hw, *(UINT16*)(&(d[i])), datareg);
-				}
-				if (len4 & 1) {
-					UINT16 data;
-					UINT8 *b = (UINT8 *) &data;
-					b[0] = d[len4-1];
-					b[1] = 0;
-
-					hfa384x_setreg_noswap(hw, data, datareg);
-				}
-			}
-//			printk(KERN_DEBUG "ctb2 %d id %04x o %d %d %d %d %d\n", bap, id, offset, len1, len2, len3, len4);
-
-		}
-
-#if (WLAN_HOSTIF == WLAN_PCI)
-		udelay(5);
-		/* Release lock */
-		spin_unlock_irqrestore( &(hw->baplock), flags);
-#endif
-
-	}
-
-	if (result)
-		WLAN_LOG_ERROR("copy_to_bap() failed.\n");
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_copy_from_aux
-*
-* Copies a collection of bytes from the controller memory.  The
-* Auxiliary port MUST be enabled prior to calling this function.
-* We _might_ be in a download state.
-*
-* Arguments:
-*	hw		device structure
-*	cardaddr	address in hfa384x data space to read
-*	auxctl		address space select
-*	buf		ptr to destination host buffer
-*	len		length of data to transfer (in bytes)
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*	buf contains the data copied
-*
-* Call context:
-*	process thread
-*	interrupt
-----------------------------------------------------------------*/
-void
-hfa384x_copy_from_aux(
-	hfa384x_t *hw, UINT32 cardaddr, UINT32 auxctl, void *buf, UINT len)
-{
-	UINT16		currpage;
-	UINT16		curroffset;
-	UINT		i = 0;
-
-	DBFENTER;
-
-	if ( !(hw->auxen) ) {
-		WLAN_LOG_DEBUG(1,
-			"Attempt to read 0x%04x when aux not enabled\n",
-			cardaddr);
-		return;
-
-	}
-	/* Build appropriate aux page and offset */
-	currpage = HFA384x_AUX_MKPAGE(cardaddr);
-	curroffset = HFA384x_AUX_MKOFF(cardaddr, auxctl);
-	hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
-	hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
-	udelay(5);	/* beat */
-
-	/* read the data */
-	while ( i < len) {
-		*((UINT16*)(buf+i)) = hfa384x_getreg_noswap(hw, HFA384x_AUXDATA);
-		i+=2;
-		curroffset+=2;
-		if ( (curroffset&HFA384x_ADDR_AUX_OFF_MASK) >
-			HFA384x_ADDR_AUX_OFF_MAX ) {
-			currpage++;
-			curroffset = 0;
-			curroffset = HFA384x_AUX_MKOFF(curroffset, auxctl);
-			hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
-			hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
-			udelay(5);	/* beat */
-		}
-	}
-	/* Make sure the auxctl bits are clear */
-	hfa384x_setreg(hw, 0, HFA384x_AUXOFFSET);
-	DBFEXIT;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_copy_to_aux
-*
-* Copies a collection of bytes to the controller memory.  The
-* Auxiliary port MUST be enabled prior to calling this function.
-* We _might_ be in a download state.
-*
-* Arguments:
-*	hw		device structure
-*	cardaddr	address in hfa384x data space to read
-*	auxctl		address space select
-*	buf		ptr to destination host buffer
-*	len		length of data to transfer (in bytes)
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*	Controller memory now contains a copy of buf
-*
-* Call context:
-*	process thread
-*	interrupt
-----------------------------------------------------------------*/
-void
-hfa384x_copy_to_aux(
-	hfa384x_t *hw, UINT32 cardaddr, UINT32 auxctl, void *buf, UINT len)
-{
-	UINT16		currpage;
-	UINT16		curroffset;
-	UINT		i = 0;
-
-	DBFENTER;
-
-	if ( !(hw->auxen) ) {
-		WLAN_LOG_DEBUG(1,
-			"Attempt to read 0x%04x when aux not enabled\n",
-			cardaddr);
-		return;
-
-	}
-	/* Build appropriate aux page and offset */
-	currpage = HFA384x_AUX_MKPAGE(cardaddr);
-	curroffset = HFA384x_AUX_MKOFF(cardaddr, auxctl);
-	hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
-	hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
-	udelay(5);	/* beat */
-
-	/* write the data */
-	while ( i < len) {
-		hfa384x_setreg_noswap(hw,
-			*((UINT16*)(buf+i)), HFA384x_AUXDATA);
-		i+=2;
-		curroffset+=2;
-		if ( curroffset > HFA384x_ADDR_AUX_OFF_MAX ) {
-			currpage++;
-			curroffset = 0;
-			hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
-			hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
-			udelay(5);	/* beat */
-		}
-	}
-	DBFEXIT;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_cmd_wait
-*
-* Waits for availability of the Command register, then
-* issues the given command.  Then polls the Evstat register
-* waiting for command completion.  Timeouts shouldn't be
-* possible since we're preventing overlapping commands and all
-* commands should be cleared and acknowledged.
-*
-* Arguments:
-*	wlandev		device structure
-*       cmd             cmd structure.  Includes all arguments and result
-*                       data points.  All in host order.
-*
-* Returns:
-*	0		success
-*	-ETIMEDOUT	timed out waiting for register ready or
-*			command completion
-*	>0		command indicated error, Status and Resp0-2 are
-*			in hw structure.
-*
-* Side effects:
-*
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-static int hfa384x_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd)
-{
-	int		result = -ETIMEDOUT;
-	UINT16		reg = 0;
-	UINT16          counter;
-
-	DBFENTER;
-
-	hw->cmdflag = 0;
-	hw->cmddata = cmd;
-
-	/* wait for the busy bit to clear */
-	counter = 0;
-	reg = hfa384x_getreg(hw, HFA384x_CMD);
-	while ( HFA384x_CMD_ISBUSY(reg) &&
-		(counter < 10)) {
-		reg = hfa384x_getreg(hw, HFA384x_CMD);
-		counter++;
-		udelay(10);
-	}
-
-	if (HFA384x_CMD_ISBUSY(reg)) {
-		WLAN_LOG_ERROR("hfa384x_cmd timeout(1), reg=0x%0hx.\n", reg);
-		goto failed;
-	}
-	if (!HFA384x_CMD_ISBUSY(reg)) {
-		/* busy bit clear, write command */
-		hfa384x_setreg(hw, cmd->parm0, HFA384x_PARAM0);
-		hfa384x_setreg(hw, cmd->parm1, HFA384x_PARAM1);
-		hfa384x_setreg(hw, cmd->parm2, HFA384x_PARAM2);
-		hfa384x_setreg(hw, cmd->cmd, HFA384x_CMD);
-
-#ifdef CMD_IRQ
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,0))
-		while (! hw->cmdflag)
-			interruptible_sleep_on(&hw->cmdq);
-#else
-		wait_event_interruptible(hw->cmdq, hw->cmdflag);
-#endif
-		result = HFA384x_STATUS_RESULT_GET(cmd->status);
-#else // CMD_IRQ
-		/* Now wait for completion */
-		counter = 0;
-		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-		/* Initialization is the problem.  It takes about
-                   100ms. "normal" commands are typically is about
-                   200-400 us (I've never seen less than 200).  Longer
-                   is better so that we're not hammering the bus. */
-		while ( !HFA384x_EVSTAT_ISCMD(reg) &&
-			(counter < 5000)) {
-			reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-			counter++;
-			udelay(200);
-		}
-
-		if ( HFA384x_EVSTAT_ISCMD(reg) ) {
-			result = 0;
-			cmd->result.status = hfa384x_getreg(hw, HFA384x_STATUS);
-			cmd->result.resp0 = hfa384x_getreg(hw, HFA384x_RESP0);
-			cmd->result.resp1 = hfa384x_getreg(hw, HFA384x_RESP1);
-			cmd->result.resp2 = hfa384x_getreg(hw, HFA384x_RESP2);
-			hfa384x_setreg(hw, HFA384x_EVACK_CMD,
-				HFA384x_EVACK);
-			result = HFA384x_STATUS_RESULT_GET(cmd->result.status);
-		} else {
-			WLAN_LOG_ERROR("hfa384x_cmd timeout(2), reg=0x%0hx.\n", reg);
-		}
-#endif  /* CMD_IRQ */
-	}
-
- failed:
-	hw->cmdflag = 0;
-	hw->cmddata = NULL;
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_dl_docmd_wait
-*
-* Waits for availability of the Command register, then
-* issues the given command.  Then polls the Evstat register
-* waiting for command completion.  Timeouts shouldn't be
-* possible since we're preventing overlapping commands and all
-* commands should be cleared and acknowledged.
-*
-* This routine is only used for downloads.  Since it doesn't lock out
-* interrupts the system response is much better.
-*
-* Arguments:
-*	wlandev		device structure
-*       cmd             cmd structure.  Includes all arguments and result
-*                       data points.  All in host order.
-*
-* Returns:
-*	0		success
-*	-ETIMEDOUT	timed out waiting for register ready or
-*			command completion
-*	>0		command indicated error, Status and Resp0-2 are
-*			in hw structure.
-*
-* Side effects:
-*
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-static int hfa384x_dl_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd)
-{
-	int		result = -ETIMEDOUT;
-	unsigned long	timeout;
-	UINT16		reg = 0;
-
-	DBFENTER;
-	/* wait for the busy bit to clear */
-	timeout = jiffies + 1*HZ;
-	reg = hfa384x_getreg(hw, HFA384x_CMD);
-	while ( HFA384x_CMD_ISBUSY(reg) && time_before( jiffies, timeout) ) {
-		reg = hfa384x_getreg(hw, HFA384x_CMD);
-		udelay(10);
-	}
-	if (HFA384x_CMD_ISBUSY(reg)) {
-		WLAN_LOG_WARNING("Timed out waiting for cmd register.\n");
-		goto failed;
-	}
-
-	if (!HFA384x_CMD_ISBUSY(reg)) {
-		/* busy bit clear, write command */
-		hfa384x_setreg(hw, cmd->parm0, HFA384x_PARAM0);
-		hfa384x_setreg(hw, cmd->parm1, HFA384x_PARAM1);
-		hfa384x_setreg(hw, cmd->parm2, HFA384x_PARAM2);
-		hfa384x_setreg(hw, cmd->cmd, HFA384x_CMD);
-
-		/* Now wait for completion */
-		if ( (HFA384x_CMD_CMDCODE_GET(cmd->cmd) == HFA384x_CMDCODE_DOWNLD) ) {
-			/* dltimeout is in ms */
-			timeout = (((UINT32)hw->dltimeout) / 1000UL) * HZ;
-			if ( timeout > 0 ) {
-				timeout += jiffies;
-			} else {
-				timeout = jiffies + 1*HZ;
-			}
-		} else {
-			timeout = jiffies + 1*HZ;
-		}
-		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-		while ( !HFA384x_EVSTAT_ISCMD(reg) && time_before(jiffies,timeout) ) {
-			udelay(100);
-			reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-		}
-		if ( HFA384x_EVSTAT_ISCMD(reg) ) {
-			result = 0;
-			cmd->result.status = hfa384x_getreg(hw, HFA384x_STATUS);
-			cmd->result.resp0 = hfa384x_getreg(hw, HFA384x_RESP0);
-			cmd->result.resp1 = hfa384x_getreg(hw, HFA384x_RESP1);
-			cmd->result.resp2 = hfa384x_getreg(hw, HFA384x_RESP2);
-			hfa384x_setreg(hw, HFA384x_EVACK_CMD, HFA384x_EVACK);
-			result = HFA384x_STATUS_RESULT_GET(cmd->result.status);
-		}
-	}
-
-failed:
-	DBFEXIT;
-	return result;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_start
-*
-* Issues the MAC initialize command, sets up some data structures,
-* and enables the interrupts.  After this function completes, the
-* low-level stuff should be ready for any/all commands.
-*
-* Arguments:
-*	hw		device structure
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_start(hfa384x_t *hw)
-{
-	int	result = 0;
-	UINT16			reg;
-	int			i;
-	int			j;
-	DBFENTER;
-
-	/* call initialize */
-	result = hfa384x_cmd_initialize(hw);
-	if (result != 0) {
-		WLAN_LOG_ERROR("Initialize command failed.\n");
-		goto failed;
-	}
-
-	/* make sure interrupts are disabled and any layabout events cleared */
-	hfa384x_setreg(hw, 0, HFA384x_INTEN);
-	hfa384x_setreg(hw, 0xffff, HFA384x_EVACK);
-
-        hw->txfid_head = 0;
-        hw->txfid_tail = 0;
-        hw->txfid_N = HFA384x_DRVR_FIDSTACKLEN_MAX;
-        memset(hw->txfid_queue, 0, sizeof(hw->txfid_queue));
-
-	/* Allocate tx and notify FIDs */
-	/* First, tx */
-	for ( i = 0; i < HFA384x_DRVR_FIDSTACKLEN_MAX-1; i++) {
-		result = hfa384x_cmd_allocate(hw, HFA384x_DRVR_TXBUF_MAX);
-		if (result != 0) {
-			WLAN_LOG_ERROR("Allocate(tx) command failed.\n");
-			goto failed;
-		}
-		j = 0;
-		do {
-			reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-			udelay(10);
-			j++;
-		} while ( !HFA384x_EVSTAT_ISALLOC(reg) && j < 50); /* 50 is timeout */
-		if ( j >= 50 ) {
-			WLAN_LOG_ERROR("Timed out waiting for evalloc(tx).\n");
-			result = -ETIMEDOUT;
-			goto failed;
-		}
-		reg = hfa384x_getreg(hw, HFA384x_ALLOCFID);
-
-		txfid_queue_add(hw, reg);
-
-		WLAN_LOG_DEBUG(4,"hw->txfid_queue[%d]=0x%04x\n",i,reg);
-
-		reg = HFA384x_EVACK_ALLOC_SET(1);
-		hfa384x_setreg(hw, reg, HFA384x_EVACK);
-
-	}
-
-	/* Now, the info frame fid */
-	result = hfa384x_cmd_allocate(hw, HFA384x_INFOFRM_MAXLEN);
-	if (result != 0) {
-		WLAN_LOG_ERROR("Allocate(tx) command failed.\n");
-		goto failed;
-	}
-	i = 0;
-	do {
-		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-		udelay(10);
-		i++;
-	} while ( !HFA384x_EVSTAT_ISALLOC(reg) && i < 50); /* 50 is timeout */
-	if ( i >= 50 ) {
-		WLAN_LOG_ERROR("Timed out waiting for evalloc(info).\n");
-		result = -ETIMEDOUT;
-		goto failed;
-	}
-	hw->infofid = hfa384x_getreg(hw, HFA384x_ALLOCFID);
-	reg = HFA384x_EVACK_ALLOC_SET(1);
-	hfa384x_setreg(hw, reg, HFA384x_EVACK);
-	WLAN_LOG_DEBUG(4,"hw->infofid=0x%04x\n", hw->infofid);
-
-	/* Set swsupport regs to magic # for card presence detection */
-	hfa384x_setreg(hw, HFA384x_DRVR_MAGIC, HFA384x_SWSUPPORT0);
-
-	/* Now enable the interrupts and set the running state */
-	hfa384x_setreg(hw, 0xffff, HFA384x_EVSTAT);
-	hfa384x_events_all(hw);
-
-	hw->state = HFA384x_STATE_RUNNING;
-
-	goto done;
-failed:
-	WLAN_LOG_ERROR("Failed, result=%d\n", result);
-done:
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_stop
-*
-* Issues the initialize command to leave us in the 'reset' state.
-*
-* Arguments:
-*	hw		device structure
-* Returns:
-*	0		success
-*	>0		f/w reported error - f/w status code
-*	<0		driver reported error
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_stop(hfa384x_t *hw)
-{
-	int	result = 0;
-	int i;
-	DBFENTER;
-
-	del_timer_sync(&hw->commsqual_timer);
-
-	if ( hw->wlandev->hwremoved ) {
-		/* only flush when we're shutting down for good */
-		flush_scheduled_work();
-	}
-
-	if (hw->state == HFA384x_STATE_RUNNING) {
-		/*
-		 * Send the MAC initialize cmd.
-		 */
-		hfa384x_cmd_initialize(hw);
-
-		/*
-		 * Make absolutely sure interrupts are disabled and any
-		 * layabout events cleared
-		 */
-		hfa384x_setreg(hw, 0, HFA384x_INTEN);
-		hfa384x_setreg(hw, 0xffff, HFA384x_EVACK);
-	}
-
-	tasklet_kill(&hw->bap_tasklet);
-
-	hw->link_status = HFA384x_LINK_NOTCONNECTED;
-	hw->state = HFA384x_STATE_INIT;
-
-	/* Clear all the port status */
-	for ( i = 0; i < HFA384x_NUMPORTS_MAX; i++) {
-		hw->port_enabled[i] = 0;
-	}
-
-	DBFEXIT;
-	return result;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_txframe
-*
-* Takes a frame from prism2sta and queues it for transmission.
-*
-* Arguments:
-*	hw		device structure
-*	skb		packet buffer struct.  Contains an 802.11
-*			data frame.
-*       p80211_hdr      points to the 802.11 header for the packet.
-* Returns:
-*	0		Success and more buffs available
-*	1		Success but no more buffs
-*	2		Allocation failure
-*	3		MAC Tx command failed
-*	4		Buffer full or queue busy
-*
-* Side effects:
-*
-* Call context:
-*	process thread
-----------------------------------------------------------------*/
-int hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb, p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep)
-{
-	hfa384x_tx_frame_t	txdesc;
-	UINT16			macq = 0;
-	UINT16			fid;
-	int			result;
-
-	DBFENTER;
-
-	/* Build Tx frame structure */
-	/* Set up the control field */
-	memset(&txdesc, 0, sizeof(txdesc));
-
-/* Tx complete and Tx exception disable per dleach.  Might be causing
- * buf depletion
- */
-#define DOBOTH 1
-#if DOBOTH
-	txdesc.tx_control =
-		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
-		HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(1);
-#elif DOEXC
-	txdesc.tx_control =
-		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
-		HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(0);
-#else
-	txdesc.tx_control =
-		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
-		HFA384x_TX_TXEX_SET(0) | HFA384x_TX_TXOK_SET(0);
-#endif
-
-	/* if we're using host WEP, increase size by IV+ICV */
-	if (p80211_wep->data) {
-		txdesc.data_len = host2hfa384x_16(skb->len+8);
-		//		txdesc.tx_control |= HFA384x_TX_NOENCRYPT_SET(1);
-	} else {
-		txdesc.data_len =  host2hfa384x_16(skb->len);
-	}
-
-	txdesc.tx_control = host2hfa384x_16(txdesc.tx_control);
-	/* copy the header over to the txdesc */
-	memcpy(&(txdesc.frame_control), p80211_hdr, sizeof(p80211_hdr_t));
-
-	/* Since tbusy is set whenever the stack is empty, there should
-	 * always be something on the stack if we get to this point.
-	 * [MSM]: NOT TRUE!!!!! so I added the test of fid below.
-	 */
-
-	/* Allocate FID */
-
-	fid = txfid_queue_remove(hw);
-
-	if ( fid == 0 ) { /* stack or queue was empty */
-		return 4;
-	}
-
-	/* now let's get the cmdlock */
-	spin_lock(&hw->cmdlock);
-
-	/* Copy descriptor+payload to FID */
-        if (p80211_wep->data) {
-		result = hfa384x_copy_to_bap4(hw, HFA384x_BAP_PROC, fid, 0,
-					      &txdesc, sizeof(txdesc),
-					      p80211_wep->iv, sizeof(p80211_wep->iv),
-					      p80211_wep->data, skb->len,
-					      p80211_wep->icv, sizeof(p80211_wep->icv));
-	} else {
-		result = hfa384x_copy_to_bap4(hw, HFA384x_BAP_PROC, fid, 0,
-					      &txdesc, sizeof(txdesc),
-					      skb->data, skb->len,
-					      NULL, 0, NULL, 0);
-	}
-
-	if ( result ) {
-		WLAN_LOG_DEBUG(1,
-			"copy_to_bap(%04x, %d, %d) failed, result=0x%x\n",
-			fid,
-		 	sizeof(txdesc),
-	 		skb->len,
-			result);
-
-		/* put the fid back in the queue */
-		txfid_queue_add(hw, fid);
-
-		result = 3;
-		goto failed;
-	}
-
-	/* Issue Tx command */
-	result = hfa384x_cmd_transmit(hw, HFA384x_TXCMD_RECL, macq, fid);
-
-	if ( result != 0 ) {
-		txfid_queue_add(hw, fid);
-
-		WLAN_LOG_DEBUG(1,"cmd_tx(%04x) failed, result=%d\n",
-			fid, result);
-		result = 3;
-		goto failed;
-	}
-
-	/* indicate we haven't any buffers, int_alloc will clear */
-	result = txfid_queue_empty(hw);
-failed:
-
-	spin_unlock(&hw->cmdlock);
-
-	DBFEXIT;
-	return result;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_interrupt
-*
-* Driver interrupt handler.
-*
-* Arguments:
-*	irq		irq number
-*	dev_id		pointer to the device
-*	regs		registers
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*	May result in a frame being passed up the stack or an info
-*	frame being handled.
-*
-* Call context:
-*	Ummm, could it be interrupt?
-----------------------------------------------------------------*/
-irqreturn_t hfa384x_interrupt(int irq, void *dev_id PT_REGS)
-{
-	int			reg;
-	wlandevice_t		*wlandev = (wlandevice_t*)dev_id;
-	hfa384x_t		*hw = wlandev->priv;
-	int			ev_read = 0;
-	DBFENTER;
-
-	if (!wlandev || wlandev->hwremoved)
-		return IRQ_NONE;  /* Not much we can do w/o hardware */
-#if (WLAN_HOSTIF == WLAN_PCMCIA)
-	if (hw->iobase == 0)  /* XXX FIXME Properly */
-		return IRQ_NONE;
-#endif
-
-	for (;;ev_read++) {
-		if (ev_read >= prism2_irq_evread_max)
-			break;
-
-		/* Check swsupport reg magic # for card presence */
-		reg = hfa384x_getreg(hw, HFA384x_SWSUPPORT0);
-		if ( reg != HFA384x_DRVR_MAGIC) {
-			WLAN_LOG_DEBUG(2, "irq=%d, no magic.  Card removed?.\n", irq);
-			break;
-		}
-
-		/* read the EvStat register for interrupt enabled events */
-		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-
-		/* AND with the enabled interrupts */
-		reg &= hfa384x_getreg(hw, HFA384x_INTEN);
-
-		/* Handle the events */
-		if ( HFA384x_EVSTAT_ISWTERR(reg) ){
-			WLAN_LOG_ERROR(
-			"Error: WTERR interrupt received (unhandled).\n");
-			hfa384x_setreg(hw, HFA384x_EVACK_WTERR_SET(1),
-				HFA384x_EVACK);
-		}
-
-		if ( HFA384x_EVSTAT_ISINFDROP(reg) ){
-			hfa384x_int_infdrop(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_INFDROP_SET(1),
-				HFA384x_EVACK);
-		}
-
-		if (HFA384x_EVSTAT_ISBAP_OP(reg)) {
-			/* Disable the BAP interrupts */
-			hfa384x_events_nobap(hw);
-			tasklet_schedule(&hw->bap_tasklet);
-		}
-
-		if ( HFA384x_EVSTAT_ISALLOC(reg) ){
-			hfa384x_int_alloc(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_ALLOC_SET(1),
-				HFA384x_EVACK);
-		}
-
-		if ( HFA384x_EVSTAT_ISDTIM(reg) ){
-			hfa384x_int_dtim(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_DTIM_SET(1),
-				HFA384x_EVACK);
-		}
-#ifdef CMD_IRQ
-		if ( HFA384x_EVSTAT_ISCMD(reg) ){
-			hfa384x_int_cmd(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_CMD_SET(1),
-				       HFA384x_EVACK);
-		}
-#endif
-
-		/* allow the evstat to be updated after the evack */
-		udelay(20);
-	}
-
-	DBFEXIT;
-	return IRQ_HANDLED;
-}
-
-#ifdef CMD_IRQ
-/*----------------------------------------------------------------
-* hfa384x_int_cmd
-*
-* Handles command completion event.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	interrupt
-----------------------------------------------------------------*/
-void hfa384x_int_cmd(wlandevice_t *wlandev)
-{
-	hfa384x_t		*hw = wlandev->priv;
-	DBFENTER;
-
-	// check to make sure it's the right command?
-	if (hw->cmddata) {
-		hw->cmddata->status = hfa384x_getreg(hw, HFA384x_STATUS);
-		hw->cmddata->resp0 = hfa384x_getreg(hw, HFA384x_RESP0);
-		hw->cmddata->resp1 = hfa384x_getreg(hw, HFA384x_RESP1);
-		hw->cmddata->resp2 = hfa384x_getreg(hw, HFA384x_RESP2);
-	}
-	hw->cmdflag = 1;
-
-	printk(KERN_INFO "um. int_cmd\n");
-
-	wake_up_interruptible(&hw->cmdq);
-
-	// XXXX perform a bap copy too?
-
-	DBFEXIT;
-	return;
-}
-#endif
-
-/*----------------------------------------------------------------
-* hfa384x_int_dtim
-*
-* Handles the DTIM early warning event.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	interrupt
-----------------------------------------------------------------*/
-static void hfa384x_int_dtim(wlandevice_t *wlandev)
-{
-#if 0
-	hfa384x_t		*hw = wlandev->priv;
-#endif
-	DBFENTER;
-	prism2sta_ev_dtim(wlandev);
-	DBFEXIT;
-	return;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_int_infdrop
-*
-* Handles the InfDrop event.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	interrupt
-----------------------------------------------------------------*/
-static void hfa384x_int_infdrop(wlandevice_t *wlandev)
-{
-#if 0
-	hfa384x_t		*hw = wlandev->priv;
-#endif
-	DBFENTER;
-	prism2sta_ev_infdrop(wlandev);
-	DBFEXIT;
-	return;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_int_info
-*
-* Handles the Info event.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	tasklet
-----------------------------------------------------------------*/
-static void hfa384x_int_info(wlandevice_t *wlandev)
-{
-	hfa384x_t		*hw = wlandev->priv;
-	UINT16			reg;
-	hfa384x_InfFrame_t	inf;
-	int			result;
-	DBFENTER;
-	/* Retrieve the FID */
-	reg = hfa384x_getreg(hw, HFA384x_INFOFID);
-
-	/* Retrieve the length */
-	result = hfa384x_copy_from_bap( hw,
-		HFA384x_BAP_INT, reg, 0, &inf.framelen, sizeof(UINT16));
-	if ( result ) {
-		WLAN_LOG_DEBUG(1,
-			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
-			reg, sizeof(inf), result);
-		goto failed;
-	}
-	inf.framelen = hfa384x2host_16(inf.framelen);
-
-	/* Retrieve the rest */
-	result = hfa384x_copy_from_bap( hw,
-		HFA384x_BAP_INT, reg, sizeof(UINT16),
-		&(inf.infotype), inf.framelen * sizeof(UINT16));
-	if ( result ) {
-		WLAN_LOG_DEBUG(1,
-			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
-			reg, sizeof(inf), result);
-		goto failed;
-	}
-
-	prism2sta_ev_info(wlandev, &inf);
-failed:
-	DBFEXIT;
-	return;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_int_txexc
-*
-* Handles the TxExc event.  A Transmit Exception event indicates
-* that the MAC's TX process was unsuccessful - so the packet did
-* not get transmitted.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	tasklet
-----------------------------------------------------------------*/
-static void hfa384x_int_txexc(wlandevice_t *wlandev)
-{
-	hfa384x_t		*hw = wlandev->priv;
-	UINT16			status;
-	UINT16			fid;
-	int			result = 0;
-	DBFENTER;
-	/* Collect the status and display */
-	fid = hfa384x_getreg(hw, HFA384x_TXCOMPLFID);
-	result = hfa384x_copy_from_bap(hw, HFA384x_BAP_INT, fid, 0, &status, sizeof(status));
-	if ( result ) {
-		WLAN_LOG_DEBUG(1,
-			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
-			fid, sizeof(status), result);
-		goto failed;
-	}
-	status = hfa384x2host_16(status);
-	prism2sta_ev_txexc(wlandev, status);
-failed:
-	DBFEXIT;
-	return;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_int_tx
-*
-* Handles the Tx event.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	tasklet
-----------------------------------------------------------------*/
-static void hfa384x_int_tx(wlandevice_t *wlandev)
-{
-	hfa384x_t		*hw = wlandev->priv;
-	UINT16			fid;
-	UINT16			status;
-	int			result = 0;
-	DBFENTER;
-	fid = hfa384x_getreg(hw, HFA384x_TXCOMPLFID);
-	result = hfa384x_copy_from_bap(hw, HFA384x_BAP_INT, fid, 0, &status, sizeof(status));
-	if ( result ) {
-		WLAN_LOG_DEBUG(1,
-			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
-			fid, sizeof(status), result);
-		goto failed;
-	}
-	status = hfa384x2host_16(status);
-	prism2sta_ev_tx(wlandev, status);
-failed:
-	DBFEXIT;
-	return;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_int_rx
-*
-* Handles the Rx event.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	tasklet
-----------------------------------------------------------------*/
-static void hfa384x_int_rx(wlandevice_t *wlandev)
-{
-	hfa384x_t		*hw = wlandev->priv;
-	UINT16			rxfid;
-	hfa384x_rx_frame_t	rxdesc;
-	int			result;
-	int                     hdrlen;
-	UINT16                  fc;
-	p80211_rxmeta_t	*rxmeta;
-	struct sk_buff          *skb = NULL;
-	UINT8 *datap;
-
-	DBFENTER;
-
-	/* Get the FID */
-	rxfid = hfa384x_getreg(hw, HFA384x_RXFID);
-	/* Get the descriptor (including headers) */
-	result = hfa384x_copy_from_bap(hw,
-			HFA384x_BAP_INT,
-			rxfid,
-			0,
-			&rxdesc,
-			sizeof(rxdesc));
-	if ( result ) {
-		WLAN_LOG_DEBUG(1,
-			"copy_from_bap(0x%04x, %d, %d) failed, result=0x%x\n",
-			rxfid,
-			0,
-			sizeof(rxdesc),
-			result);
-		goto done;
-	}
-
-	/* Byte order convert once up front. */
-	rxdesc.status =	hfa384x2host_16(rxdesc.status);
-	rxdesc.time =	hfa384x2host_32(rxdesc.time);
-
-	/* drop errors and whatnot in promisc mode */
-	if (( wlandev->netdev->flags & IFF_PROMISC ) &&
-	    (HFA384x_RXSTATUS_ISFCSERR(rxdesc.status) ||
-	     HFA384x_RXSTATUS_ISUNDECR(rxdesc.status)))
-	  goto done;
-
-	/* Now handle frame based on port# */
-	switch( HFA384x_RXSTATUS_MACPORT_GET(rxdesc.status) )
-	{
-	case 0:
-
-		fc = ieee2host16(rxdesc.frame_control);
-
-		/* If exclude and we receive an unencrypted, drop it */
-		if ( (wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED) &&
-		     !WLAN_GET_FC_ISWEP(fc)) {
-			goto done;
-		}
-
-		hdrlen = p80211_headerlen(fc);
-
-		/* Allocate the buffer, note CRC (aka FCS). pballoc */
-		/* assumes there needs to be space for one */
-		skb = dev_alloc_skb(hfa384x2host_16(rxdesc.data_len) + hdrlen + WLAN_CRC_LEN + 2); /* a little extra */
-
-		if ( ! skb ) {
-			WLAN_LOG_ERROR("alloc_skb failed.\n");
-			goto done;
-                }
-
-		skb->dev = wlandev->netdev;
-
-		/* theoretically align the IP header on a 32-bit word. */
-		if ( hdrlen == WLAN_HDR_A4_LEN )
-			skb_reserve(skb, 2);
-
-		/* Copy the 802.11 hdr to the buffer */
-		datap = skb_put(skb, WLAN_HDR_A3_LEN);
-		memcpy(datap, &rxdesc.frame_control, WLAN_HDR_A3_LEN);
-
-		/* Snag the A4 address if present */
-		if (hdrlen == WLAN_HDR_A4_LEN) {
-			datap = skb_put(skb, WLAN_ADDR_LEN);
-			memcpy(datap, &rxdesc.address4, WLAN_HDR_A3_LEN);
-		}
-
-		/* we can convert the data_len as we passed the original on */
-		rxdesc.data_len = hfa384x2host_16(rxdesc.data_len);
-
-		/* Copy the payload data to the buffer */
-		if ( rxdesc.data_len > 0 ) {
-			datap = skb_put(skb, rxdesc.data_len);
-			result = hfa384x_copy_from_bap(hw,
-				HFA384x_BAP_INT, rxfid, HFA384x_RX_DATA_OFF,
-				datap, rxdesc.data_len);
-			if ( result ) {
-				WLAN_LOG_DEBUG(1,
-					"copy_from_bap(0x%04x, %d, %d) failed, result=0x%x\n",
-					rxfid,
-					HFA384x_RX_DATA_OFF,
-					rxdesc.data_len,
-					result);
-				goto failed;
-			}
-		}
-		/* the prism2 cards don't return the FCS */
-		datap = skb_put(skb, WLAN_CRC_LEN);
-		memset (datap, 0xff, WLAN_CRC_LEN);
-		skb_reset_mac_header(skb);
-
-		/* Attach the rxmeta, set some stuff */
-		p80211skb_rxmeta_attach(wlandev, skb);
-		rxmeta = P80211SKB_RXMETA(skb);
-		rxmeta->mactime = rxdesc.time;
-		rxmeta->rxrate = rxdesc.rate;
-		rxmeta->signal = rxdesc.signal - hw->dbmadjust;
-		rxmeta->noise = rxdesc.silence - hw->dbmadjust;
-
-		prism2sta_ev_rx(wlandev, skb);
-		goto done;
-	case 7:
-
-        	if ( ! HFA384x_RXSTATUS_ISFCSERR(rxdesc.status) ) {
-                        hfa384x_int_rxmonitor( wlandev, rxfid, &rxdesc);
-                } else {
-                        WLAN_LOG_DEBUG(3,"Received monitor frame: FCSerr set\n");
-                }
-		goto done;
-
-	default:
-
-		WLAN_LOG_WARNING("Received frame on unsupported port=%d\n",
-			HFA384x_RXSTATUS_MACPORT_GET(rxdesc.status) );
-		goto done;
-	}
-
- failed:
-	dev_kfree_skb(skb);
-
- done:
-	DBFEXIT;
-	return;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_int_rxmonitor
-*
-* Helper function for int_rx.  Handles monitor frames.
-* Note that this function allocates space for the FCS and sets it
-* to 0xffffffff.  The hfa384x doesn't give us the FCS value but the
-* higher layers expect it.  0xffffffff is used as a flag to indicate
-* the FCS is bogus.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*	rxfid		received FID
-*	rxdesc		rx descriptor read from card in int_rx
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*	Allocates an skb and passes it up via the PF_PACKET interface.
-* Call context:
-*	interrupt
-----------------------------------------------------------------*/
-static void hfa384x_int_rxmonitor( wlandevice_t *wlandev, UINT16 rxfid,
-				   hfa384x_rx_frame_t *rxdesc)
-{
-	hfa384x_t			*hw = wlandev->priv;
-	UINT				hdrlen = 0;
-	UINT				datalen = 0;
-	UINT				skblen = 0;
-	UINT				truncated = 0;
-	UINT8				*datap;
-	UINT16				fc;
-	struct sk_buff			*skb;
-
-	DBFENTER;
-	/* Don't forget the status, time, and data_len fields are in host order */
-	/* Figure out how big the frame is */
-	fc = ieee2host16(rxdesc->frame_control);
-	hdrlen = p80211_headerlen(fc);
-	datalen = hfa384x2host_16(rxdesc->data_len);
-
-	/* Allocate an ind message+framesize skb */
-	skblen = sizeof(p80211msg_lnxind_wlansniffrm_t) +
-		hdrlen + datalen + WLAN_CRC_LEN;
-
-	/* sanity check the length */
-	if ( skblen >
-		(sizeof(p80211msg_lnxind_wlansniffrm_t) +
-		WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN) ) {
-		WLAN_LOG_DEBUG(1, "overlen frm: len=%d\n",
-			skblen - sizeof(p80211msg_lnxind_wlansniffrm_t));
-	}
-
-	if ( (skb = dev_alloc_skb(skblen)) == NULL ) {
-		WLAN_LOG_ERROR("alloc_skb failed trying to allocate %d bytes\n", skblen);
-		return;
-	}
-
-	/* only prepend the prism header if in the right mode */
-	if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
-	    (hw->sniffhdr == 0)) {
-		p80211msg_lnxind_wlansniffrm_t	*msg;
-		datap = skb_put(skb, sizeof(p80211msg_lnxind_wlansniffrm_t));
-		msg = (p80211msg_lnxind_wlansniffrm_t*) datap;
-
-		/* Initialize the message members */
-		msg->msgcode = DIDmsg_lnxind_wlansniffrm;
-		msg->msglen = sizeof(p80211msg_lnxind_wlansniffrm_t);
-		strcpy(msg->devname, wlandev->name);
-
-		msg->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
-		msg->hosttime.status = 0;
-		msg->hosttime.len = 4;
-		msg->hosttime.data = jiffies;
-
-		msg->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
-		msg->mactime.status = 0;
-		msg->mactime.len = 4;
-		msg->mactime.data = rxdesc->time * 1000;
-
-		msg->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
-		msg->channel.status = 0;
-		msg->channel.len = 4;
-		msg->channel.data = hw->sniff_channel;
-
-		msg->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
-		msg->rssi.status = P80211ENUM_msgitem_status_no_value;
-		msg->rssi.len = 4;
-		msg->rssi.data = 0;
-
-		msg->sq.did = DIDmsg_lnxind_wlansniffrm_sq;
-		msg->sq.status = P80211ENUM_msgitem_status_no_value;
-		msg->sq.len = 4;
-		msg->sq.data = 0;
-
-		msg->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
-		msg->signal.status = 0;
-		msg->signal.len = 4;
-		msg->signal.data = rxdesc->signal;
-
-		msg->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
-		msg->noise.status = 0;
-		msg->noise.len = 4;
-		msg->noise.data = rxdesc->silence;
-
-		msg->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
-		msg->rate.status = 0;
-		msg->rate.len = 4;
-		msg->rate.data = rxdesc->rate / 5; /* set to 802.11 units */
-
-		msg->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
-		msg->istx.status = 0;
-		msg->istx.len = 4;
-		msg->istx.data = P80211ENUM_truth_false;
-
-		msg->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
-		msg->frmlen.status = 0;
-		msg->frmlen.len = 4;
-		msg->frmlen.data = hdrlen + datalen + WLAN_CRC_LEN;
-	} else if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
-		   (hw->sniffhdr != 0)) {
-		p80211_caphdr_t		*caphdr;
-		/* The NEW header format! */
-		datap = skb_put(skb, sizeof(p80211_caphdr_t));
-		caphdr = (p80211_caphdr_t*) datap;
-
-		caphdr->version =	htonl(P80211CAPTURE_VERSION);
-		caphdr->length =	htonl(sizeof(p80211_caphdr_t));
-		caphdr->mactime =	__cpu_to_be64(rxdesc->time);
-		caphdr->hosttime =	__cpu_to_be64(jiffies);
-		caphdr->phytype =	htonl(4); /* dss_dot11_b */
-		caphdr->channel =	htonl(hw->sniff_channel);
-		caphdr->datarate =	htonl(rxdesc->rate);
-		caphdr->antenna =	htonl(0); /* unknown */
-		caphdr->priority =	htonl(0); /* unknown */
-		caphdr->ssi_type =	htonl(3); /* rssi_raw */
-		caphdr->ssi_signal =	htonl(rxdesc->signal);
-		caphdr->ssi_noise =	htonl(rxdesc->silence);
-		caphdr->preamble =	htonl(0); /* unknown */
-		caphdr->encoding =	htonl(1); /* cck */
-	}
-	/* Copy the 802.11 header to the skb (ctl frames may be less than a full header) */
-	datap = skb_put(skb, hdrlen);
-	memcpy( datap, &(rxdesc->frame_control), hdrlen);
-
-	/* If any, copy the data from the card to the skb */
-	if ( datalen > 0 )
-	{
-		/* Truncate the packet if the user wants us to */
-		UINT	dataread = datalen;
-		if(hw->sniff_truncate > 0 && dataread > hw->sniff_truncate) {
-			dataread = hw->sniff_truncate;
-			truncated = 1;
-		}
-
-		datap = skb_put(skb, dataread);
-		hfa384x_copy_from_bap(hw,
-			HFA384x_BAP_INT, rxfid, HFA384x_RX_DATA_OFF,
-			datap, dataread);
-
-		/* check for unencrypted stuff if WEP bit set. */
-		if (*(datap - hdrlen + 1) & 0x40) // wep set
-		  if ((*(datap) == 0xaa) && (*(datap+1) == 0xaa))
-		    *(datap - hdrlen + 1) &= 0xbf; // clear wep; it's the 802.2 header!
-	}
-
-	if (!truncated && hw->sniff_fcs) {
-		/* Set the FCS */
-		datap = skb_put(skb, WLAN_CRC_LEN);
-		memset( datap, 0xff, WLAN_CRC_LEN);
-	}
-
-	/* pass it back up */
-	prism2sta_ev_rx(wlandev, skb);
-
-	DBFEXIT;
-	return;
-}
-
-/*----------------------------------------------------------------
-* hfa384x_int_alloc
-*
-* Handles the Alloc event.
-*
-* Arguments:
-*	wlandev		wlan device structure
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*
-* Call context:
-*	interrupt
-----------------------------------------------------------------*/
-static void hfa384x_int_alloc(wlandevice_t *wlandev)
-{
-	hfa384x_t		*hw = wlandev->priv;
-	UINT16			fid;
-	INT16			result;
-
-	DBFENTER;
-
-	/* Handle the reclaimed FID */
-	/*   collect the FID and push it onto the stack */
-	fid = hfa384x_getreg(hw, HFA384x_ALLOCFID);
-
-	if ( fid != hw->infofid ) { /* It's a transmit fid */
-		WLAN_LOG_DEBUG(5, "int_alloc(%#x)\n", fid);
-		result = txfid_queue_add(hw, fid);
-		if (result != -1) {
-			prism2sta_ev_alloc(wlandev);
-			WLAN_LOG_DEBUG(5, "q_add.\n");
-		} else {
-			WLAN_LOG_DEBUG(5, "q_full.\n");
-		}
-	} else {
-		/* unlock the info fid */
-		up(&hw->infofid_sem);
-	}
-
-	DBFEXIT;
-	return;
-}
-
-
-/*----------------------------------------------------------------
-* hfa384x_drvr_handover
-*
-* Sends a handover notification to the MAC.
-*
-* Arguments:
-*	hw		device structure
-*	addr		address of station that's left
-*
-* Returns:
-*	zero		success.
-*	-ERESTARTSYS	received signal while waiting for semaphore.
-*	-EIO		failed to write to bap, or failed in cmd.
-*
-* Side effects:
-*
-* Call context:
-*	process thread, NOTE: this call may block on a semaphore!
-----------------------------------------------------------------*/
-int hfa384x_drvr_handover( hfa384x_t *hw, UINT8 *addr)
-{
-	int			result = 0;
-        hfa384x_HandoverAddr_t  rec;
-        UINT                    len;
-        DBFENTER;
-
-	/* Acquire the infofid */
-	if ( down_interruptible(&hw->infofid_sem) ) {
-		result = -ERESTARTSYS;
-		goto failed;
-	}
-
-        /* Set up the record */
-        len = sizeof(hfa384x_HandoverAddr_t);
-        rec.framelen = host2hfa384x_16(len/2 - 1);
-        rec.infotype = host2hfa384x_16(HFA384x_IT_HANDOVERADDR);
-        memcpy(rec.handover_addr, addr, sizeof(rec.handover_addr));
-
-        /* Issue the command */
-        result = hfa384x_cmd_notify(hw, 1, hw->infofid, &rec, len);
-
-        if ( result != 0 ) {
-                WLAN_LOG_DEBUG(1,"cmd_notify(%04x) failed, result=%d",
-                        hw->infofid, result);
-		result = -EIO;
-                goto failed;
-        }
-
-failed:
-	DBFEXIT;
-	return result;
-}
-
-void hfa384x_tx_timeout(wlandevice_t *wlandev)
-{
-	DBFENTER;
-
-	WLAN_LOG_WARNING("Implement me.\n");
-
-	DBFEXIT;
-}
-
-/* Handles all "rx" BAP operations */
-static void     hfa384x_bap_tasklet(unsigned long data)
-{
-	hfa384x_t *hw = (hfa384x_t *) data;
-	wlandevice_t *wlandev = hw->wlandev;
-	int counter = prism2_irq_evread_max;
-	int			reg;
-
-	DBFENTER;
-
-	while (counter-- > 0) {
-		/* Get interrupt register */
-		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
-
-		if ((reg == 0xffff) ||
-		    !(reg & HFA384x_INT_BAP_OP)) {
-			break;
-		}
-
-		if ( HFA384x_EVSTAT_ISINFO(reg) ){
-			hfa384x_int_info(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_INFO_SET(1),
-				HFA384x_EVACK);
-		}
-		if ( HFA384x_EVSTAT_ISTXEXC(reg) ){
-			hfa384x_int_txexc(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_TXEXC_SET(1),
-				HFA384x_EVACK);
-		}
-		if ( HFA384x_EVSTAT_ISTX(reg) ){
-			hfa384x_int_tx(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_TX_SET(1),
-				HFA384x_EVACK);
-		}
-		if ( HFA384x_EVSTAT_ISRX(reg) ){
-			hfa384x_int_rx(wlandev);
-			hfa384x_setreg(hw, HFA384x_EVACK_RX_SET(1),
-				HFA384x_EVACK);
-		}
-	}
-
-	/* re-enable interrupts */
-	hfa384x_events_all(hw);
-
-	DBFEXIT;
-}
diff --git a/drivers/staging/wlan-ng/prism2_cs.c b/drivers/staging/wlan-ng/prism2_cs.c
deleted file mode 100644
index 63ce565..0000000
--- a/drivers/staging/wlan-ng/prism2_cs.c
+++ /dev/null
@@ -1,1487 +0,0 @@
-#define WLAN_HOSTIF WLAN_PCMCIA
-#include "hfa384x.c"
-#include "prism2mgmt.c"
-#include "prism2mib.c"
-#include "prism2sta.c"
-
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,21) )
-#if (WLAN_CPU_FAMILY == WLAN_Ix86)
-#ifndef CONFIG_ISA
-#warning "You may need to enable ISA support in your kernel."
-#endif
-#endif
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
-static u_int	irq_mask = 0xdeb8;		/* Interrupt mask */
-static int	irq_list[4] = { -1 };		/* Interrupt list */
-#endif
-static u_int	prism2_ignorevcc=1;		/* Boolean, if set, we
-						 * ignore what the Vcc
-						 * is set to and what the CIS
-						 * says.
-						 */
-module_param( prism2_ignorevcc, int, 0644);
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,9))
-static int numlist = 4;
-module_param_array(irq_list, int, numlist, 0444);
-#else
-module_param_array(irq_list, int, NULL, 0444);
-#endif
-module_param( irq_mask, int, 0644);
-#endif
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15)
-static int prism2_cs_suspend(struct pcmcia_device *pdev);
-static int prism2_cs_resume(struct pcmcia_device *pdev);
-static void prism2_cs_remove(struct pcmcia_device *pdev);
-static int prism2_cs_probe(struct pcmcia_device *pdev);
-#else
-dev_link_t	*prism2sta_attach(void);
-static void	prism2sta_detach(dev_link_t *link);
-static void	prism2sta_config(dev_link_t *link);
-static void	prism2sta_release(u_long arg);
-static int 	prism2sta_event (event_t event, int priority, event_callback_args_t *args);
-
-static dev_link_t	*dev_list = NULL;	/* head of instance list */
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
-/*----------------------------------------------------------------
-* cs_error
-*
-* Utility function to print card services error messages.
-*
-* Arguments:
-*	handle	client handle identifying this CS client
-*	func	CS function number that generated the error
-*	ret	CS function return code
-*
-* Returns:
-*	nothing
-* Side effects:
-*
-* Call context:
-*	process thread
-*	interrupt
-----------------------------------------------------------------*/
-static void cs_error(client_handle_t handle, int func, int ret)
-{
-#if (defined(CS_RELEASE_CODE) && (CS_RELEASE_CODE < 0x2911))
-	CardServices(ReportError, dev_info, (void *)func, (void *)ret);
-#else
-	error_info_t err = { func, ret };
-	pcmcia_report_error(handle, &err);
-#endif
-}
-#else // kernel_version
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)
-static struct pcmcia_device_id prism2_cs_ids[] = {
-	PCMCIA_DEVICE_PROD_ID12("INTERSIL",  "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), // Intersil PRISM2 Reference Design 11Mb/s 802.11b WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), // Compaq WL100/200 11Mb/s 802.11b WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), // Compaq iPaq HNW-100 11Mb/s 802.11b WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), // Samsung SWL2000-N 11Mb/s 802.11b WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), // Z-Com XI300 11Mb/s 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High",  "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), // ZoomAir 4100 11Mb/s 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ",  " Network PC CARD",  "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), // Linksys WPC11 11Mbps 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID123("Addtron",  "AWP-100 Wireless PCMCIA",  "Version 01.02", 0xe6ec52ce, 0x8649af2, 0x4b74baa0), // Addtron AWP-100 11Mbps 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID123("D",  "Link DWL-650 11Mbps WLAN Card",  "Version 01.02", 0x71b18589, 0xb6f1b0ab, 0x4b74baa0), // D-Link DWL-650 11Mbps 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID123("SMC",  "SMC2632W",  "Version 01.02", 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0), // SMC 2632W 11Mbps 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID1234("Intersil",  "PRISM 2_5 PCMCIA ADAPTER",  "ISL37300P",  "Eval-RevA", 0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e), // BroMax Freeport 11Mbps 802.11b WLAN Card (Prism 2.5)
-	PCMCIA_DEVICE_PROD_ID123("U.S. Robotics",  "IEEE 802.11b PC-CARD",  "Version 01.02", 0xc7b8df9d, 0x1700d087, 0x4b74baa0), // U.S. Robotics IEEE 802.11b PC-CARD
-	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications",  "WPC-0100", 0xfdd73470, 0xe0b6f146), // Level-One WPC-0100
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), // Bromax OEM 11Mbps 802.11b WLAN Card (Prism 2.5)
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), // Bromax OEM 11Mbps 802.11b WLAN Card (Prism 3)
-	PCMCIA_DEVICE_PROD_ID12("corega K.K.",  "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), // corega K.K. Wireless LAN PCC-11
-	PCMCIA_DEVICE_PROD_ID12("corega K.K.",  "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), // corega K.K. Wireless LAN PCCA-11
-	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), // CONTEC FLEXSCAN/FX-DDS110-PCC
-	PCMCIA_DEVICE_PROD_ID12("PLANEX",  "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), // PLANEX GeoWave/GW-NS110
-	PCMCIA_DEVICE_PROD_ID123("OEM",  "PRISM2 IEEE 802.11 PC-Card",  "Version 01.02", 0xfea54c90, 0x48f2bdd6, 0x4b74baa0), // Ambicom WL1100 11Mbps 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID123("LeArtery",  "SYNCBYAIR 11Mbps Wireless LAN PC Card",  "Version 01.02", 0x7e3b326a, 0x49893e92, 0x4b74baa0), // LeArtery SYNCBYAIR 11Mbps 802.11b WLAN Card
-PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), // Intermec MobileLAN 11Mbps 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID123("NETGEAR MA401 Wireless PC",  "Card",  "Version 01.00", 0xa37434e9, 0x9762e8f1, 0xa57adb8c), // NETGEAR MA401 11Mbps 802.11 WLAN Card
-	PCMCIA_DEVICE_PROD_ID1234("Intersil",  "PRISM Freedom PCMCIA Adapter",  "ISL37100P",  "Eval-RevA", 0x4b801a17, 0xf222ec2d, 0x630d52b2, 0xc23adc0e), // Intersil PRISM Freedom 11mbps 802.11 WLAN Card
-	PCMCIA_DEVICE_PROD_ID123("OTC",  "Wireless AirEZY 2411-PCC WLAN Card",  "Version 01.02", 0x4ac44287, 0x235a6bed, 0x4b74baa0), // OTC Wireless AirEZY 2411-PCC 11Mbps 802.11 WLAN Card
-	PCMCIA_DEVICE_PROD_ID1234("802.11",  "11Mbps Wireless LAN Card",  "v08C1",  ""   , 0xb67a610e, 0x655aa7b7, 0x264b451a, 0x0), // Dynalink L11HDT 11Mbps 802.11 WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), // Dynalink L11HDT 11Mbps 802.11 WLAN Card
-	PCMCIA_DEVICE_PROD_ID12("PROXIM",  "RangeLAN-DS/LAN PC CARD", 0xc6536a5e, 0x3f35797d), // PROXIM RangeLAN-DS/LAN PC CARD
-	PCMCIA_DEVICE_PROD_ID1234("ACTIONTEC",  "PRISM Wireless LAN PC Card",  "0381",  "RevA", 0x393089da, 0xa71e69d5, 0x90471fa9, 0x57a66194), // ACTIONTEC PRISM Wireless LAN PC Card
-	PCMCIA_DEVICE_MANF_CARD(0x1668, 0x0101), // ACTIONTEC PRISM Wireless LAN PC Card
-	PCMCIA_DEVICE_PROD_ID12("3Com",  "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), // 3Com AirConnect 3CRWE737A
-	PCMCIA_DEVICE_PROD_ID12("3Com",  "3CRWE777A AirConnect Wireless LAN PCI Card"  , 0x41240e5b, 0xafc7c33e), // 3Com AirConnect 3CRWE777A
-	PCMCIA_DEVICE_PROD_ID12("ASUS",  "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), // ASUS WL-100 802.11b WLAN  PC Card
-	PCMCIA_DEVICE_PROD_ID12("ASUS",  "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), // ASUS WL-110 802.11b WLAN CF Card
-	PCMCIA_DEVICE_PROD_ID12("BUFFALO",  "WLI-CF-S11G", 0x2decece3, 0x82067c18), // BUFFALO WLI-CF-S11G 802.11b WLAN Card
-	PCMCIA_DEVICE_PROD_ID1234("The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", "RevA", 0xa5f472c2, 0x9c05598d, 0xc9049a39, 0x57a66194), // Linksys WCF11 11Mbps 802.11b WLAN Card (Prism 2.5)
-	PCMCIA_DEVICE_PROD_ID1234("Linksys",  "Wireless CompactFlash Card",  "",  "", 0x733cc81, 0xc52f395, 0x0, 0x0), // Linksys WCF12 11Mbps 802.11b WLAN Card (Prism 3)
-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), // Linksys WCF12 11Mbps 802.11b WLAN Card (Prism 3)
-	PCMCIA_DEVICE_PROD_ID1234("NETGEAR MA401RA Wireless PC",  "Card",  "ISL37300P",  "Eval-RevA", 0x306467f, 0x9762e8f1, 0xc9049a39, 0xc23adc0e), // NETGEAR MA401RA 11Mbps 802.11 WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), // D-Link DCF-660W  11Mbps 802.11b WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001), // Microsoft Wireless Notebook Adapter MN-520
-	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), // AnyPoint(TM) Wireless II PC Card
-	PCMCIA_DEVICE_PROD_ID1234("D",  "Link DRC-650 11Mbps WLAN Card",  "Version 01.02",  "" , 0x71b18589, 0xf144e3ac, 0x4b74baa0, 0x0), // D-Link DRC-650 802.11b WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), // Adaptec AWN-8030
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7110), // D-Link DWL-650 rev P 802.11b WLAN card
-	// PCMCIA_DEVICE_PROD_ID1234("D-Link",  "DWL-650 Wireless PC Card RevP",  "ISL37101P-10",  "A3", 0x1a424a1c, 0x6ea57632, 0xdd97a26b, 0x56b21f52), // D-Link DWL-650 rev P 802.11b WLAN card
-	PCMCIA_DEVICE_PROD_ID123("INTERSIL",   "I-GATE 11M PC Card / PC Card plus",  "Version 01.02", 0x74c5e40d, 0x8304ff77, 0x4b74baa0), // I-Gate 11M PC Card
-	PCMCIA_DEVICE_PROD_ID1234("BENQ",  "AWL100 PCMCIA ADAPTER",  "ISL37300P",  "Eval-RevA", 0x35dadc74, 0x1f7fedb, 0xc9049a39, 0xc23adc0e), // benQ AWL100 802.11b WLAN Card
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), // benQ AWL100 802.11b WLAN Card
-	// PCMCIA_DEVICE_PROD_ID1("INTERSIL", 0x74c5e40d), // Intersil Prism 2 card
-	// PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), // Intersil Prism 2 card
-
-	PCMCIA_DEVICE_NULL
-};
-
-MODULE_DEVICE_TABLE(pcmcia, prism2_cs_ids);
-#endif
-
-static struct pcmcia_driver prism2_cs_driver = {
-	.drv = {
-		.name = "prism2_cs",
-	},
-	.owner = THIS_MODULE,
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15)
-	.suspend = prism2_cs_suspend,
-	.resume = prism2_cs_resume,
-	.remove = prism2_cs_remove,
-	.probe = prism2_cs_probe,
-	.id_table = prism2_cs_ids,
-#else
-	.attach = prism2sta_attach,
-	.detach = prism2sta_detach,
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)
-	.id_table = prism2_cs_ids,
-	.event =  prism2sta_event,
-#endif // > 2.6.12
-#endif // <= 2.6.15
-};
-#endif /* kernel_version */
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15)
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-#define CFG_CHECK(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
-        WLAN_LOG_DEBUG(1, "CardServices(" #fn ") returned %d\n", ret); \
-        cs_error(pdev, fn, ret); \
-        goto next_entry; \
-} \
-} while (0)
-
-static void prism2_cs_remove(struct pcmcia_device *pdev)
-{
-	struct wlandevice  *wlandev;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
-        dev_link_t *link = dev_to_instance(pdev);
-#endif
-
-	DBFENTER;
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	wlandev = pdev->priv;
-#else
-	wlandev = link->priv;
-#endif
-
-	if (wlandev) {
-		p80211netdev_hwremoved(wlandev);
-		unregister_wlandev(wlandev);
-		wlan_unsetup(wlandev);
-		if (wlandev->priv) {
-			hfa384x_t *hw = wlandev->priv;
-			wlandev->priv = NULL;
-			if (hw) {
-				hfa384x_destroy(hw);
-				kfree(hw);
-			}
-		}
-		kfree(wlandev);
-	}
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	pdev->priv = NULL;
-        pcmcia_disable_device(pdev);
-#else
-        if (link->state & DEV_CONFIG) {
-	        if (link->win)
-			pcmcia_release_window(link->win);
-		pcmcia_release_configuration(link->handle);
-		if (link->io.NumPorts1)
-			pcmcia_release_io(link->handle, &link->io);
-		if (link->irq.AssignedIRQ)
-			pcmcia_release_irq(link->handle, &link->irq);
-
-		link->state &= ~DEV_CONFIG;
-	}
-
-	link->priv = NULL;
-	kfree(link);
-#endif
-
-	DBFEXIT;
-	return;
-}
-
-static int prism2_cs_suspend(struct pcmcia_device *pdev)
-{
-	struct wlandevice  *wlandev;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
-        dev_link_t *link = dev_to_instance(pdev);
-#endif
-
-	DBFENTER;
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	wlandev = pdev->priv;
-	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
-#else
-	wlandev = link->priv;
-
-        link->state |= DEV_SUSPEND;
-        if (link->state & DEV_CONFIG) {
-		prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
-		pcmcia_release_configuration(link->handle);
-	}
-#endif
-
-	DBFEXIT;
-
-	return 0;
-}
-
-static int prism2_cs_resume(struct pcmcia_device *pdev)
-{
-	struct wlandevice  *wlandev;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
-        dev_link_t *link = dev_to_instance(pdev);
-#endif
-
-	DBFENTER;
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	wlandev = pdev->priv;
-	// XXX do something here?
-#else
-	wlandev = link->priv;
-        link->state &= ~DEV_SUSPEND;
-        if (link->state & DEV_CONFIG) {
-                pcmcia_request_configuration(link->handle, &link->conf);
-		// XXX do something here?
-	}
-#endif
-
-
-	DBFEXIT;
-
-	return 0;
-}
-
-static int prism2_cs_probe(struct pcmcia_device *pdev)
-{
-	int rval = 0;
-	struct wlandevice *wlandev = NULL;
-	hfa384x_t *hw = NULL;
-
-        config_info_t socketconf;
-        cisparse_t *parse = NULL;
-	tuple_t tuple;
-	uint8_t	buf[64];
-        int last_fn, last_ret;
-        cistpl_cftable_entry_t dflt = { 0 };
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
-	dev_link_t *link;
-#endif
-
-	DBFENTER;
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	/* Set up interrupt type */
-        pdev->conf.IntType = INT_MEMORY_AND_IO;
-#else
-        link = kmalloc(sizeof(dev_link_t), GFP_KERNEL);
-        if (link == NULL)
-                return -ENOMEM;
-        memset(link, 0, sizeof(dev_link_t));
-
-        link->conf.Vcc = 33;
-        link->conf.IntType = INT_MEMORY_AND_IO;
-
-        link->handle = pdev;
-        pdev->instance = link;
-        link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
-
-#endif
-
-	// VCC crap?
-        parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
-
-	wlandev = create_wlan();
-	if (!wlandev || !parse) {
-		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
-		rval = -EIO;
-		goto failed;
-	}
-	hw = wlandev->priv;
-
-	if ( wlan_setup(wlandev) != 0 ) {
-		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
-		rval = -EIO;
-		goto failed;
-	}
-
-	/* Initialize the hw struct for now */
-	hfa384x_create(hw, 0, 0, NULL);
-	hw->wlandev = wlandev;
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	hw->pdev = pdev;
-	pdev->priv = wlandev;
-#else
-	hw->link = link;
-	link->priv = wlandev;
-#endif
-
-        tuple.DesiredTuple = CISTPL_CONFIG;
-        tuple.Attributes = 0;
-        tuple.TupleData = buf;
-        tuple.TupleDataMax = sizeof(buf);
-        tuple.TupleOffset = 0;
-        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
-        CS_CHECK(GetTupleData, pcmcia_get_tuple_data(pdev, &tuple));
-        CS_CHECK(ParseTuple, pcmcia_parse_tuple(pdev, &tuple, parse));
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-        pdev->conf.ConfigBase = parse->config.base;
-        pdev->conf.Present = parse->config.rmask[0];
-#else
-        link->conf.ConfigBase = parse->config.base;
-        link->conf.Present = parse->config.rmask[0];
-
-	link->conf.Vcc = socketconf.Vcc;
-#endif
-        CS_CHECK(GetConfigurationInfo,
-                 pcmcia_get_configuration_info(pdev, &socketconf));
-
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
-        for (;;) {
-		cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
-                CFG_CHECK(GetTupleData,
-                           pcmcia_get_tuple_data(pdev, &tuple));
-                CFG_CHECK(ParseTuple,
-                           pcmcia_parse_tuple(pdev, &tuple, parse));
-
-                if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-                        dflt = *cfg;
-                if (cfg->index == 0)
-                        goto next_entry;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-                pdev->conf.ConfigIndex = cfg->index;
-#else
-                link->conf.ConfigIndex = cfg->index;
-#endif
-
-                /* Does this card need audio output? */
-                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-                        pdev->conf.Attributes |= CONF_ENABLE_SPKR;
-                        pdev->conf.Status = CCSR_AUDIO_ENA;
-#else
-                        link->conf.Attributes |= CONF_ENABLE_SPKR;
-                        link->conf.Status = CCSR_AUDIO_ENA;
-#endif
-                }
-
-                /* Use power settings for Vcc and Vpp if present */
-                /*  Note that the CIS values need to be rescaled */
-                if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (socketconf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
-                            10000 && !prism2_ignorevcc) {
-                                WLAN_LOG_DEBUG(1, "  Vcc mismatch - skipping"
-                                       " this entry\n");
-                                goto next_entry;
-                        }
-                } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (socketconf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
-                            10000 && !prism2_ignorevcc) {
-                                WLAN_LOG_DEBUG(1, "  Vcc (default) mismatch "
-                                       "- skipping this entry\n");
-                                goto next_entry;
-                        }
-                }
-
-                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-                        pdev->conf.Vpp =
-                                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-#else
-                        link->conf.Vpp1 = link->conf.Vpp2 =
-                                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-#endif
-                } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-                        pdev->conf.Vpp =
-                                dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-#else
-                        link->conf.Vpp1 = link->conf.Vpp2 =
-                                dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-#endif
-		}
-
-		/* Do we need to allocate an interrupt? */
-		/* HACK: due to a bad CIS....we ALWAYS need an interrupt */
-		/* if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-		pdev->conf.Attributes |= CONF_ENABLE_IRQ;
-#else
-		link->conf.Attributes |= CONF_ENABLE_IRQ;
-#endif
-
-		/* IO window settings */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-		pdev->io.NumPorts1 = pdev->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			pdev->io.BasePort1 = io->win[0].base;
-			if  ( pdev->io.BasePort1 != 0 ) {
-				WLAN_LOG_WARNING(
-				"Brain damaged CIS: hard coded iobase="
-				"0x%x, try letting pcmcia_cs decide...\n",
-				pdev->io.BasePort1 );
-				pdev->io.BasePort1 = 0;
-			}
-			pdev->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				pdev->io.Attributes2 = pdev->io.Attributes1;
-				pdev->io.BasePort2 = io->win[1].base;
-				pdev->io.NumPorts2 = io->win[1].len;
-			}
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		CFG_CHECK(RequestIO, pcmcia_request_io(pdev, &pdev->io));
-#else
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.BasePort1 = io->win[0].base;
-			if  ( link->io.BasePort1 != 0 ) {
-				WLAN_LOG_WARNING(
-				"Brain damaged CIS: hard coded iobase="
-				"0x%x, try letting pcmcia_cs decide...\n",
-				link->io.BasePort1 );
-				link->io.BasePort1 = 0;
-			}
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		CFG_CHECK(RequestIO, pcmcia_request_io(pdev, &link->io));
-#endif
-		/* If we got this far, we're cool! */
-		break;
-
-	next_entry:
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple));
-
-	}
-
-	/* Let pcmcia know the device name */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	pdev->dev_node = &hw->node;
-#else
-	link->dev = &hw->node;
-#endif
-
-	/* Register the network device and get assigned a name */
-	SET_MODULE_OWNER(wlandev->netdev);
-	SET_NETDEV_DEV(wlandev->netdev,  &handle_to_dev(pdev));
-	if (register_wlandev(wlandev) != 0) {
-		WLAN_LOG_NOTICE("prism2sta_cs: register_wlandev() failed.\n");
-		goto failed;
-	}
-
-	strcpy(hw->node.dev_name, wlandev->name);
-
-	/* Allocate an interrupt line.  Note that this does not assign a */
-	/* handler to the interrupt, unless the 'Handler' member of the */
-	/* irq structure is initialized. */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	if (pdev->conf.Attributes & CONF_ENABLE_IRQ) {
-		pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-		pdev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-		pdev->irq.Handler = hfa384x_interrupt;
-		pdev->irq.Instance = wlandev;
-		CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
-	}
-#else
-	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-		link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-		link->irq.Handler = hfa384x_interrupt;
-		link->irq.Instance = wlandev;
-		CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &link->irq));
-	}
-#endif
-
-	/* This actually configures the PCMCIA socket -- setting up */
-	/* the I/O windows and the interrupt mapping, and putting the */
-	/* card and host interface into "Memory and IO" mode. */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
-#else
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &link->conf));
-#endif
-
-	/* Fill the netdevice with this info */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	wlandev->netdev->irq = pdev->irq.AssignedIRQ;
-	wlandev->netdev->base_addr = pdev->io.BasePort1;
-#else
-	wlandev->netdev->irq = link->irq.AssignedIRQ;
-	wlandev->netdev->base_addr = link->io.BasePort1;
-#endif
-
-	/* And the rest of the hw structure */
-	hw->irq = wlandev->netdev->irq;
-	hw->iobase = wlandev->netdev->base_addr;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
-	link->state |= DEV_CONFIG;
-	link->state &= ~DEV_CONFIG_PENDING;
-#endif
-
-	/* And now we're done! */
-	wlandev->msdstate = WLAN_MSD_HWPRESENT;
-
-	goto done;
-
- cs_failed:
-        cs_error(pdev, last_fn, last_ret);
-
-failed:
-	// wlandev, hw, etc etc..
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	pdev->priv = NULL;
-#else
-	pdev->instance = NULL;
-	if (link) {
-		link->priv = NULL;
-		kfree(link);
-	}
-#endif
-	if (wlandev) {
-		wlan_unsetup(wlandev);
-		if (wlandev->priv) {
-			hw = wlandev->priv;
-			wlandev->priv = NULL;
-			if (hw) {
-				hfa384x_destroy(hw);
-				kfree(hw);
-			}
-		}
-		kfree(wlandev);
-	}
-
-done:
-	if (parse) kfree(parse);
-
-	DBFEXIT;
-	return rval;
-}
-#else  // <= 2.6.15
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-#define CFG_CHECK(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
-        WLAN_LOG_DEBUG(1, "CardServices(" #fn ") returned %d\n", ret); \
-        cs_error(link->handle, fn, ret); \
-        goto next_entry; \
-} \
-} while (0)
-
-/*----------------------------------------------------------------
-* prism2sta_attach
-*
-* Half of the attach/detach pair.  Creates and registers a device
-* instance with Card Services.  In this case, it also creates the
-* wlandev structure and device private structure.  These are
-* linked to the device instance via its priv member.
-*
-* Arguments:
-*	none
-*
-* Returns:
-*	A valid ptr to dev_link_t on success, NULL otherwise
-*
-* Side effects:
-*
-*
-* Call context:
-*	process thread (insmod/init_module/register_pccard_driver)
-----------------------------------------------------------------*/
-dev_link_t *prism2sta_attach(void)
-{
-	client_reg_t		client_reg;
-	int			result;
-	dev_link_t		*link = NULL;
-	wlandevice_t		*wlandev = NULL;
-	hfa384x_t		*hw = NULL;
-
-	DBFENTER;
-
-	/* Alloc our structures */
-	link =		kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
-
-	if (!link || ((wlandev = create_wlan()) == NULL)) {
-		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
-		result = -EIO;
-		goto failed;
-	}
-	hw = wlandev->priv;
-
-	/* Clear all the structs */
-	memset(link, 0, sizeof(struct dev_link_t));
-
-	if ( wlan_setup(wlandev) != 0 ) {
-		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
-		result = -EIO;
-		goto failed;
-	}
-
-	/* Initialize the hw struct for now */
-	hfa384x_create(hw, 0, 0, NULL);
-	hw->wlandev = wlandev;
-
-	/* Initialize the PC card device object. */
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-	init_timer(&link->release);
-	link->release.function = &prism2sta_release;
-	link->release.data = (u_long)link;
-#endif
-	link->conf.IntType = INT_MEMORY_AND_IO;
-	link->priv = wlandev;
-#if (defined(CS_RELEASE_CODE) && (CS_RELEASE_CODE < 0x2911))
-	link->irq.Instance = wlandev;
-#endif
-
-	/* Link in to the list of devices managed by this driver */
-	link->next = dev_list;
-	dev_list = link;
-
-	/* Register with Card Services */
-	client_reg.dev_info = &dev_info;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
-	client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) )
-	client_reg.EventMask =
-		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
-		CS_EVENT_RESET_REQUEST |
-		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
-		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
-	client_reg.event_handler = &prism2sta_event;
-#endif
-
-	client_reg.Version = 0x0210;
-	client_reg.event_callback_args.client_data = link;
-
-	result = pcmcia_register_client(&link->handle, &client_reg);
-	if (result != 0) {
-		cs_error(link->handle, RegisterClient, result);
-		prism2sta_detach(link);
-		return NULL;
-	}
-
-	goto done;
-
- failed:
-	if (link)	kfree(link);
-	if (wlandev)	kfree(wlandev);
-	if (hw)		kfree(hw);
-	link = NULL;
-
- done:
-	DBFEXIT;
-	return link;
-}
-
-
-/*----------------------------------------------------------------
-* prism2sta_detach
-*
-* Remove one of the device instances managed by this driver.
-*   Search the list for the given instance,
-*   check our flags for a waiting timer'd release call
-*   call release
-*   Deregister the instance with Card Services
-*   (netdevice) unregister the network device.
-*   unlink the instance from the list
-*   free the link, priv, and priv->priv memory
-* Note: the dev_list variable is a driver scoped static used to
-*	maintain a list of device instances managed by this
-*	driver.
-*
-* Arguments:
-*	link	ptr to the instance to detach
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*	the link structure is gone, the netdevice is gone
-*
-* Call context:
-*	Might be interrupt, don't block.
-----------------------------------------------------------------*/
-void prism2sta_detach(dev_link_t *link)
-{
-	dev_link_t		**linkp;
-	wlandevice_t		*wlandev;
-	hfa384x_t		*hw;
-
-	DBFENTER;
-
-	/* Locate prev device structure */
-	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) {
-		if (*linkp == link) break;
-	}
-
-	if (*linkp != NULL) {
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
-		unsigned long	flags;
-		/* Get rid of any timer'd release call */
-		save_flags(flags);
-		cli();
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-		if (link->state & DEV_RELEASE_PENDING) {
-			del_timer_sync(&link->release);
-			link->state &= ~DEV_RELEASE_PENDING;
-		}
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
-		restore_flags(flags);
-#endif
-
-		/* If link says we're still config'd, call release */
-		if (link->state & DEV_CONFIG) {
-			prism2sta_release((u_long)link);
-			if (link->state & DEV_STALE_CONFIG) {
-				link->state |= DEV_STALE_LINK;
-				return;
-			}
-		}
-
-		/* Tell Card Services we're not around any more */
-		if (link->handle) {
-			pcmcia_deregister_client(link->handle);
-		}
-
-		/* Unlink device structure, free bits */
-		*linkp = link->next;
-		if ( link->priv != NULL ) {
-			wlandev = (wlandevice_t*)link->priv;
-			p80211netdev_hwremoved(wlandev);
-			if (link->dev != NULL) {
-				unregister_wlandev(wlandev);
-			}
-			wlan_unsetup(wlandev);
-			if (wlandev->priv) {
-				hw = wlandev->priv;
-				wlandev->priv = NULL;
-				if (hw) {
-					hfa384x_destroy(hw);
-					kfree(hw);
-				}
-			}
-			link->priv = NULL;
-			kfree(wlandev);
-		}
-		kfree(link);
-	}
-
-	DBFEXIT;
-	return;
-}
-
-/*----------------------------------------------------------------
-* prism2sta_config
-*
-* Half of the config/release pair.  Usually called in response to
-* a card insertion event.  At this point, we _know_ there's some
-* physical device present.  That means we can start poking around
-* at the CIS and at any device specific config data we want.
-*
-* Note the gotos and the macros.  I recoded this once without
-* them, and it got incredibly ugly.  It's actually simpler with
-* them.
-*
-* Arguments:
-*	link	the dev_link_t structure created in attach that
-*		represents this device instance.
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*	Resources (irq, io, mem) are allocated
-*	The pcmcia dev_link->node->name is set
-*	(For netcards) The device structure is finished and,
-*	  most importantly, registered.  This means that there
-*	  is now a _named_ device that can be configured from
-*	  userland.
-*
-* Call context:
-*	May be called from a timer.  Don't block!
-----------------------------------------------------------------*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-#define CFG_CHECK(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
-        WLAN_LOG_DEBUG(1, "CardServices(" #fn ") returned %d\n", ret); \
-        cs_error(link->handle, fn, ret); \
-        goto next_entry; \
-} \
-} while (0)
-
-void prism2sta_config(dev_link_t *link)
-{
-	client_handle_t		handle;
-	wlandevice_t		*wlandev;
-	hfa384x_t               *hw;
-	int			last_fn;
-	int			last_ret;
-	tuple_t			tuple;
-	cisparse_t		parse;
-	config_info_t		socketconf;
-	UINT8			buf[64];
-	int			minVcc = 0;
-	int			maxVcc = 0;
-	cistpl_cftable_entry_t	dflt = { 0 };
-
-	DBFENTER;
-
-	handle = link->handle;
-	wlandev = (wlandevice_t*)link->priv;
-	hw = wlandev->priv;
-
-	/* Collect the config register info */
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
-	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
-	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
-
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-	/* Configure card */
-	link->state |= DEV_CONFIG;
-
-	/* Acquire the current socket config (need Vcc setting) */
-	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &socketconf));
-
-	/* Loop through the config table entries until we find one that works */
-	/* Assumes a complete and valid CIS */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		CFG_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
-		CFG_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
-
-		if (cfg->index == 0) goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Lets print out the Vcc that the controller+pcmcia-cs set
-		 * for us, cause that's what we're going to use.
-		 */
-		WLAN_LOG_DEBUG(1,"Initial Vcc=%d/10v\n", socketconf.Vcc);
-		if (prism2_ignorevcc) {
-			link->conf.Vcc = socketconf.Vcc;
-			goto skipvcc;
-		}
-
-		/* Use power settings for Vcc and Vpp if present */
-		/* Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-			WLAN_LOG_DEBUG(1, "Vcc obtained from curtupl.VNOM\n");
-			minVcc = maxVcc =
-				cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
-		} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
-			WLAN_LOG_DEBUG(1, "Vcc set from dflt.VNOM\n");
-			minVcc = maxVcc =
-				dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-		} else if ((cfg->vcc.present & (1<<CISTPL_POWER_VMAX)) &&
-			   (cfg->vcc.present & (1<<CISTPL_POWER_VMIN)) ) {
-			WLAN_LOG_DEBUG(1, "Vcc set from curtupl(VMIN,VMAX)\n");			minVcc = cfg->vcc.param[CISTPL_POWER_VMIN]/10000;
-			maxVcc = cfg->vcc.param[CISTPL_POWER_VMAX]/10000;
-		} else if ((dflt.vcc.present & (1<<CISTPL_POWER_VMAX)) &&
-			   (dflt.vcc.present & (1<<CISTPL_POWER_VMIN)) ) {
-			WLAN_LOG_DEBUG(1, "Vcc set from dflt(VMIN,VMAX)\n");
-			minVcc = dflt.vcc.param[CISTPL_POWER_VMIN]/10000;
-			maxVcc = dflt.vcc.param[CISTPL_POWER_VMAX]/10000;
-		}
-
-		if ( socketconf.Vcc >= minVcc && socketconf.Vcc <= maxVcc) {
-			link->conf.Vcc = socketconf.Vcc;
-		} else {
-			/* [MSM]: Note that I've given up trying to change
-			 * the Vcc if a change is indicated.  It seems the
-			 * system&socketcontroller&card vendors can't seem
-			 * to get it right, so I'm tired of trying to hack
-			 * my way around it.  pcmcia-cs does its best using
-			 * the voltage sense pins but sometimes the controller
-			 * lies.  Then, even if we have a good read on the VS
-			 * pins, some system designs will silently ignore our
-			 * requests to set the voltage.  Additionally, some
-			 * vendors have 3.3v indicated on their sense pins,
-			 * but 5v specified in the CIS or vice-versa.  I've
-			 * had it.  My only recommendation is "let the buyer
-			 * beware".  Your system might supply 5v to a 3v card
-			 * (possibly causing damage) or a 3v capable system
-			 * might supply 5v to a 3v capable card (wasting
-			 * precious battery life).
-			 * My only recommendation (if you care) is to get
-			 * yourself an extender card (I don't know where, I
-			 * have only one myself) and a meter and test it for
-			 * yourself.
-			 */
-			goto next_entry;
-		}
-skipvcc:
-		WLAN_LOG_DEBUG(1, "link->conf.Vcc=%d\n", link->conf.Vcc);
-
-		/* Do we need to allocate an interrupt? */
-		/* HACK: due to a bad CIS....we ALWAYS need an interrupt */
-		/* if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) */
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.BasePort1 = io->win[0].base;
-			if  ( link->io.BasePort1 != 0 ) {
-				WLAN_LOG_WARNING(
-				"Brain damaged CIS: hard coded iobase="
-				"0x%x, try letting pcmcia_cs decide...\n",
-				link->io.BasePort1 );
-				link->io.BasePort1 = 0;
-			}
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		CFG_CHECK(RequestIO, pcmcia_request_io(link->handle, &link->io));
-
-		/* If we got this far, we're cool! */
-		break;
-
-next_entry:
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		CS_CHECK(GetNextTuple,
-                         pcmcia_get_next_tuple(handle, &tuple));
-	}
-
-	/* Allocate an interrupt line.  Note that this does not assign a */
-	/* handler to the interrupt, unless the 'Handler' member of the */
-	/* irq structure is initialized. */
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	{
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
-		int			i;
-		link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-		if (irq_list[0] == -1)
-			link->irq.IRQInfo2 = irq_mask;
-		else
-			for (i=0; i<4; i++)
-				link->irq.IRQInfo2 |= 1 << irq_list[i];
-#else
-		link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-#endif
-		link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-		link->irq.Handler = hfa384x_interrupt;
-		link->irq.Instance = wlandev;
-		CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
-	}
-
-	/* This actually configures the PCMCIA socket -- setting up */
-	/* the I/O windows and the interrupt mapping, and putting the */
-	/* card and host interface into "Memory and IO" mode. */
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
-
-	/* Fill the netdevice with this info */
-	wlandev->netdev->irq = link->irq.AssignedIRQ;
-	wlandev->netdev->base_addr = link->io.BasePort1;
-
-	/* Report what we've done */
-	WLAN_LOG_INFO("%s: index 0x%02x: Vcc %d.%d",
-		dev_info, link->conf.ConfigIndex,
-		link->conf.Vcc/10, link->conf.Vcc%10);
-	if (link->conf.Vpp1)
-		printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq.AssignedIRQ);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1);
-	printk("\n");
-
-	link->state &= ~DEV_CONFIG_PENDING;
-
-	/* Let pcmcia know the device name */
-	link->dev = &hw->node;
-
-	/* Register the network device and get assigned a name */
-	SET_MODULE_OWNER(wlandev->netdev);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,11) )
-	SET_NETDEV_DEV(wlandev->netdev,  &handle_to_dev(link->handle));
-#endif
-	if (register_wlandev(wlandev) != 0) {
-		WLAN_LOG_NOTICE("prism2sta_cs: register_wlandev() failed.\n");
-		goto failed;
-	}
-
-	strcpy(hw->node.dev_name, wlandev->name);
-
-	/* Any device custom config/query stuff should be done here */
-	/* For a netdevice, we should at least grab the mac address */
-
-	return;
-cs_failed:
-	cs_error(link->handle, last_fn, last_ret);
-	WLAN_LOG_ERROR("NextTuple failure? It's probably a Vcc mismatch.\n");
-
-failed:
-	prism2sta_release((u_long)link);
-	return;
-}
-
-/*----------------------------------------------------------------
-* prism2sta_release
-*
-* Half of the config/release pair.  Usually called in response to
-* a card ejection event.  Checks to make sure no higher layers
-* are still (or think they are) using the card via the link->open
-* field.
-*
-* NOTE: Don't forget to increment the link->open variable in the
-*  device_open method, and decrement it in the device_close
-*  method.
-*
-* Arguments:
-*	arg	a generic 32 bit variable.  It's the value that
-*		we assigned to link->release.data in sta_attach().
-*
-* Returns:
-*	nothing
-*
-* Side effects:
-*	All resources should be released after this function
-*	executes and finds the device !open.
-*
-* Call context:
-*	Possibly in a timer context.  Don't do anything that'll
-*	block.
-----------------------------------------------------------------*/
-void prism2sta_release(u_long arg)
-{
-        dev_link_t	*link = (dev_link_t *)arg;
-
-	DBFENTER;
-
-	/* First thing we should do is get the MSD back to the
-	 * HWPRESENT state.  I.e. everything quiescent.
-	 */
-	prism2sta_ifstate(link->priv, P80211ENUM_ifstate_disable);
-
-        if (link->open) {
-		/* TODO: I don't think we're even using this bit of code
-		 * and I don't think it's hurting us at the moment.
-		 */
-                WLAN_LOG_DEBUG(1,
-			"prism2sta_cs: release postponed, '%s' still open\n",
-			link->dev->dev_name);
-                link->state |= DEV_STALE_CONFIG;
-                return;
-        }
-
-        pcmcia_release_configuration(link->handle);
-        pcmcia_release_io(link->handle, &link->io);
-        pcmcia_release_irq(link->handle, &link->irq);
-
-        link->state &= ~(DEV_CONFIG | DEV_RELEASE_PENDING);
-
-	DBFEXIT;
-}
-
-/*----------------------------------------------------------------
-* prism2sta_event
-*
-* Handler for card services events.
-*
-* Arguments:
-*	event		The event code
-*	priority	hi/low - REMOVAL is the only hi
-*	args		ptr to card services struct containing info about
-*			pcmcia status
-*
-* Returns:
-*	Zero on success, non-zero otherwise
-*
-* Side effects:
-*
-*
-* Call context:
-*	Both interrupt and process thread, depends on the event.
-----------------------------------------------------------------*/
-static int
-prism2sta_event (
-	event_t event,
-	int priority,
-	event_callback_args_t *args)
-{
-	int			result = 0;
-	dev_link_t		*link = (dev_link_t *) args->client_data;
-	wlandevice_t		*wlandev = (wlandevice_t*)link->priv;
-	hfa384x_t		*hw = NULL;
-
-	DBFENTER;
-
-	if (wlandev) hw = wlandev->priv;
-
-	switch (event)
-	{
-	case CS_EVENT_CARD_INSERTION:
-		WLAN_LOG_DEBUG(5,"event is INSERTION\n");
-		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
-		prism2sta_config(link);
-		if (!(link->state & DEV_CONFIG)) {
-			wlandev->netdev->irq = 0;
-			WLAN_LOG_ERROR(
-				"%s: Initialization failed!\n", dev_info);
-			wlandev->msdstate = WLAN_MSD_HWFAIL;
-			break;
-		}
-
-		/* Fill in the rest of the hw struct */
-		hw->irq = wlandev->netdev->irq;
-		hw->iobase = wlandev->netdev->base_addr;
-		hw->link = link;
-
-		if (prism2_doreset) {
-			result = hfa384x_corereset(hw,
-					prism2_reset_holdtime,
-					prism2_reset_settletime, 0);
-			if ( result ) {
-				WLAN_LOG_ERROR(
-					"corereset() failed, result=%d.\n",
-					result);
-				wlandev->msdstate = WLAN_MSD_HWFAIL;
-				break;
-			}
-		}
-
-#if 0
-		/*
-		 * TODO: test_hostif() not implemented yet.
-		 */
-		result = hfa384x_test_hostif(hw);
-		if (result) {
-			WLAN_LOG_ERROR(
-			"test_hostif() failed, result=%d.\n", result);
-			wlandev->msdstate = WLAN_MSD_HWFAIL;
-			break;
-		}
-#endif
-		wlandev->msdstate = WLAN_MSD_HWPRESENT;
-		break;
-
-	case CS_EVENT_CARD_REMOVAL:
-		WLAN_LOG_DEBUG(5,"event is REMOVAL\n");
-		link->state &= ~DEV_PRESENT;
-
-		if (wlandev) {
-			p80211netdev_hwremoved(wlandev);
-		}
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-		if (link->state & DEV_CONFIG)
-		{
-			link->release.expires = jiffies + (HZ/20);
-			add_timer(&link->release);
-		}
-#endif
-		break;
-	case CS_EVENT_RESET_REQUEST:
-		WLAN_LOG_DEBUG(5,"event is RESET_REQUEST\n");
-		WLAN_LOG_NOTICE(
-			"prism2 card reset not supported "
-			"due to post-reset user mode configuration "
-			"requirements.\n");
-		WLAN_LOG_NOTICE(
-			"  From user mode, use "
-			"'cardctl suspend;cardctl resume' "
-			"instead.\n");
-		break;
-	case CS_EVENT_RESET_PHYSICAL:
-	case CS_EVENT_CARD_RESET:
-		WLAN_LOG_WARNING("Rx'd CS_EVENT_RESET_xxx, should not "
-			"be possible since RESET_REQUEST was denied.\n");
-		break;
-
-	case CS_EVENT_PM_SUSPEND:
-		WLAN_LOG_DEBUG(5,"event is SUSPEND\n");
-		link->state |= DEV_SUSPEND;
-		if (link->state & DEV_CONFIG)
-		{
-			prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
-			pcmcia_release_configuration(link->handle);
-		}
-		break;
-
-	case CS_EVENT_PM_RESUME:
-		WLAN_LOG_DEBUG(5,"event is RESUME\n");
-		link->state &= ~DEV_SUSPEND;
-		if (link->state & DEV_CONFIG) {
-			pcmcia_request_configuration(link->handle, &link->conf);
-		}
-		break;
-	}
-
-	DBFEXIT;
-	return 0;  /* noone else does anthing with the return value */
-}
-#endif // <= 2.6.15
-
-
-
-int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
-{
-	int		result = 0;
-	conf_reg_t	reg;
-	UINT8		corsave;
-	DBFENTER;
-
-	WLAN_LOG_DEBUG(3, "Doing reset via CardServices().\n");
-
-	/* Collect COR */
-	reg.Function = 0;
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_COR;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	result = pcmcia_access_configuration_register(hw->pdev, &reg);
-#else
-	result = pcmcia_access_configuration_register(
-			hw->link->handle,
-			&reg);
-#endif
-	if (result != CS_SUCCESS ) {
-		WLAN_LOG_ERROR(
-			":0: AccessConfigurationRegister(CS_READ) failed,"
-			"result=%d.\n", result);
-		result = -EIO;
-	}
-	corsave = reg.Value;
-
-	/* Write reset bit (BIT7) */
-	reg.Value |= BIT7;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	result = pcmcia_access_configuration_register(hw->pdev, &reg);
-#else
-	result = pcmcia_access_configuration_register(
-			hw->link->handle,
-			&reg);
-#endif
-	if (result != CS_SUCCESS ) {
-		WLAN_LOG_ERROR(
-			":1: AccessConfigurationRegister(CS_WRITE) failed,"
-			"result=%d.\n", result);
-		result = -EIO;
-	}
-
-	/* Hold for holdtime */
-	mdelay(holdtime);
-
-	if (genesis) {
-		reg.Value = genesis;
-		reg.Action = CS_WRITE;
-		reg.Offset = CISREG_CCSR;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-		result = pcmcia_access_configuration_register(hw->pdev, &reg);
-#else
-		result = pcmcia_access_configuration_register(
-				      hw->link->handle,
-				      &reg);
-#endif
-		if (result != CS_SUCCESS ) {
-			WLAN_LOG_ERROR(
-				":1: AccessConfigurationRegister(CS_WRITE) failed,"
-				"result=%d.\n", result);
-			result = -EIO;
-		}
-	}
-
-	/* Hold for holdtime */
-	mdelay(holdtime);
-
-	/* Clear reset bit */
-	reg.Value &= ~BIT7;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	result = pcmcia_access_configuration_register(hw->pdev, &reg);
-#else
-	result = pcmcia_access_configuration_register(
-				      hw->link->handle,
-				      &reg);
-#endif
-	if (result != CS_SUCCESS ) {
-		WLAN_LOG_ERROR(
-			":2: AccessConfigurationRegister(CS_WRITE) failed,"
-			"result=%d.\n", result);
-		result = -EIO;
-		goto done;
-	}
-
-	/* Wait for settletime */
-	mdelay(settletime);
-
-	/* Set non-reset bits back what they were */
-	reg.Value = corsave;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
-	result = pcmcia_access_configuration_register(hw->pdev, &reg);
-#else
-	result = pcmcia_access_configuration_register(
-				      hw->link->handle,
-				      &reg);
-#endif
-	if (result != CS_SUCCESS ) {
-		WLAN_LOG_ERROR(
-			":2: AccessConfigurationRegister(CS_WRITE) failed,"
-			"result=%d.\n", result);
-		result = -EIO;
-		goto done;
-	}
-
-done:
-	DBFEXIT;
-	return result;
-}
-
-#ifdef MODULE
-
-static int __init prism2cs_init(void)
-{
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
-	servinfo_t	serv;
-#endif
-
-	DBFENTER;
-
-        WLAN_LOG_NOTICE("%s Loaded\n", version);
-        WLAN_LOG_NOTICE("dev_info is: %s\n", dev_info);
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
-	pcmcia_get_card_services_info(&serv);
-	if ( serv.Revision != CS_RELEASE_CODE )
-	{
-		printk(KERN_NOTICE"%s: CardServices release does not match!\n", dev_info);
-		return -1;
-	}
-
-	/* This call will result in a call to prism2sta_attach */
-	/*   and eventually prism2sta_detach */
-	register_pccard_driver( &dev_info, &prism2sta_attach, &prism2sta_detach);
-#else
-	pcmcia_register_driver(&prism2_cs_driver);
-#endif
-
-	DBFEXIT;
-	return 0;
-}
-
-static void __exit prism2cs_cleanup(void)
-{
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
-        dev_link_t *link = dev_list;
-        dev_link_t *nlink;
-        DBFENTER;
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
-	for (link=dev_list; link != NULL; link = nlink) {
-		nlink = link->next;
-		if ( link->state & DEV_CONFIG ) {
-			prism2sta_release((u_long)link);
-		}
-		prism2sta_detach(link); /* remember detach() frees link */
-	}
-#endif
-
-	unregister_pccard_driver( &dev_info);
-#else
-	pcmcia_unregister_driver(&prism2_cs_driver);
-#endif
-
-        printk(KERN_NOTICE "%s Unloaded\n", version);
-
-        DBFEXIT;
-        return;
-}
-
-module_init(prism2cs_init);
-module_exit(prism2cs_cleanup);
-
-#endif // MODULE
-
diff --git a/drivers/staging/wlan-ng/prism2_pci.c b/drivers/staging/wlan-ng/prism2_pci.c
deleted file mode 100644
index afe32df..0000000
--- a/drivers/staging/wlan-ng/prism2_pci.c
+++ /dev/null
@@ -1,332 +0,0 @@
-#define WLAN_HOSTIF WLAN_PCI
-#include "hfa384x.c"
-#include "prism2mgmt.c"
-#include "prism2mib.c"
-#include "prism2sta.c"
-
-#define PCI_SIZE		0x1000		/* Memory size - 4K bytes */
-
-/* ISL3874A 11Mb/s WLAN controller */
-#define PCIVENDOR_INTERSIL	0x1260UL
-#define PCIDEVICE_ISL3874	0x3873UL /* [MSM] yeah I know...the ID says
-					    3873. Trust me, it's a 3874. */
-
-/* Samsung SWL-2210P 11Mb/s WLAN controller (uses ISL3874A) */
-#define PCIVENDOR_SAMSUNG      0x167dUL
-#define PCIDEVICE_SWL_2210P    0xa000UL
-
-#define PCIVENDOR_NETGEAR      0x1385UL /* for MA311 */
-
-/* PCI Class & Sub-Class code, Network-'Other controller' */
-#define PCI_CLASS_NETWORK_OTHERS 0x280
-
-
-/*----------------------------------------------------------------
-* prism2sta_probe_pci
-*
-* Probe routine called when a PCI device w/ matching ID is found.
-* The ISL3874 implementation uses the following map:
-*   BAR0: Prism2.x registers memory mapped, size=4k
-* Here's the sequence:
-*   - Allocate the PCI resources.
-*   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-*   - Reset the MAC
-*   - Initialize the netdev and wlan data
-*   - Initialize the MAC
-*
-* Arguments:
-*	pdev		ptr to pci device structure containing info about
-*			pci configuration.
-*	id		ptr to the device id entry that matched this device.
-*
-* Returns:
-*	zero		- success
-*	negative	- failed
-*
-* Side effects:
-*
-*
-* Call context:
-*	process thread
-*
-----------------------------------------------------------------*/
-static int __devinit
-prism2sta_probe_pci(
-	struct pci_dev *pdev,
-	const struct pci_device_id *id)
-{
-	int		result;
-	phys_t		phymem = 0;
-	void		__iomem *mem = NULL;
-        wlandevice_t    *wlandev = NULL;
-	hfa384x_t	*hw = NULL;
-
-	DBFENTER;
-
-	/* Enable the pci device */
-	if (pci_enable_device(pdev)) {
-		WLAN_LOG_ERROR("%s: pci_enable_device() failed.\n", dev_info);
-		result = -EIO;
-		goto fail;
-	}
-
-	/* Figure out our resources */
-	phymem = pci_resource_start(pdev, 0);
-
-        if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) {
-		printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n");
-		result = -EIO;
-		goto fail;
-        }
-
-	mem = ioremap(phymem, PCI_SIZE);
-	if ( mem == 0 ) {
-		WLAN_LOG_ERROR("%s: ioremap() failed.\n", dev_info);
-		result = -EIO;
-		goto fail;
-	}
-
-	/* Log the device */
-        WLAN_LOG_INFO("A Prism2.5 PCI device found, "
-		"phymem:0x%llx, irq:%d, mem:0x%p\n",
-		(unsigned long long)phymem, pdev->irq, mem);
-
-	if ((wlandev = create_wlan()) == NULL) {
-		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
-		result = -EIO;
-		goto fail;
-	}
-	hw = wlandev->priv;
-
-	if ( wlan_setup(wlandev) != 0 ) {
-		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
-		result = -EIO;
-		goto fail;
-	}
-
-	/* Setup netdevice's ability to report resources
-	 * Note: the netdevice was allocated by wlan_setup()
-	 */
-        wlandev->netdev->irq = pdev->irq;
-        wlandev->netdev->mem_start = (unsigned long) mem;
-        wlandev->netdev->mem_end = wlandev->netdev->mem_start +
-		pci_resource_len(pdev, 0);
-
-	/* Initialize the hw data */
-        hfa384x_create(hw, wlandev->netdev->irq, 0, mem);
-	hw->wlandev = wlandev;
-
-	/* Register the wlandev, this gets us a name and registers the
-	 * linux netdevice.
-	 */
-	SET_MODULE_OWNER(wlandev->netdev);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-       SET_NETDEV_DEV(wlandev->netdev, &(pdev->dev));
-#endif
-        if ( register_wlandev(wlandev) != 0 ) {
-		WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
-		result = -EIO;
-		goto fail;
-        }
-
-#if 0
-	/* TODO: Move this and an irq test into an hfa384x_testif() routine.
-	 */
-	outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
-	reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
-	if ( reg != PRISM2STA_MAGIC ) {
-		WLAN_LOG_ERROR("MAC register access test failed!\n");
-		result = -EIO;
-		goto fail;
-	}
-#endif
-
-	/* Do a chip-level reset on the MAC */
-	if (prism2_doreset) {
-		result = hfa384x_corereset(hw,
-				prism2_reset_holdtime,
-				prism2_reset_settletime, 0);
-		if (result != 0) {
-			WLAN_LOG_ERROR(
-				"%s: hfa384x_corereset() failed.\n",
-				dev_info);
-			unregister_wlandev(wlandev);
-			hfa384x_destroy(hw);
-			result = -EIO;
-			goto fail;
-		}
-	}
-
-        pci_set_drvdata(pdev, wlandev);
-
-	/* Shouldn't actually hook up the IRQ until we
-	 * _know_ things are alright.  A test routine would help.
-	 */
-       	request_irq(wlandev->netdev->irq, hfa384x_interrupt,
-		SA_SHIRQ, wlandev->name, wlandev);
-
-	wlandev->msdstate = WLAN_MSD_HWPRESENT;
-
-	result = 0;
-	goto done;
-
- fail:
-	pci_set_drvdata(pdev, NULL);
-	if (wlandev)	kfree(wlandev);
-	if (hw)		kfree(hw);
-        if (mem)        iounmap(mem);
-	pci_release_regions(pdev);
-        pci_disable_device(pdev);
-
- done:
-	DBFEXIT;
-	return result;
-}
-
-static void __devexit prism2sta_remove_pci(struct pci_dev *pdev)
-{
-       	wlandevice_t		*wlandev;
-	hfa384x_t	*hw;
-
-	wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
-	hw = wlandev->priv;
-
-	p80211netdev_hwremoved(wlandev);
-
-	/* reset hardware */
-	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
-
-        if (pdev->irq)
-		free_irq(pdev->irq, wlandev);
-
-	unregister_wlandev(wlandev);
-
-	/* free local stuff */
-	if (hw) {
-		hfa384x_destroy(hw);
-		kfree(hw);
-	}
-
-	iounmap((void __iomem *)wlandev->netdev->mem_start);
-	wlan_unsetup(wlandev);
-
-	pci_release_regions(pdev);
-        pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-
-	kfree(wlandev);
-}
-
-
-static struct pci_device_id pci_id_tbl[] = {
-	{
-		PCIVENDOR_INTERSIL, PCIDEVICE_ISL3874,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller"
-	},
-	{
-		PCIVENDOR_INTERSIL, 0x3872,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Intersil Prism2.5 ISL3872 11Mb/s WLAN Controller"
-	},
-        {
-               PCIVENDOR_SAMSUNG, PCIDEVICE_SWL_2210P,
-               PCI_ANY_ID, PCI_ANY_ID,
-               0, 0,
-               /* Driver data, we just put the name here */
-               (unsigned long)"Samsung MagicLAN SWL-2210P 11Mb/s WLAN Controller"
-	},
-	{ /* for NetGear MA311 */
-		PCIVENDOR_NETGEAR, 0x3872,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Netgear MA311 WLAN Controller"
-	},
-	{
-		0, 0, 0, 0, 0, 0, 0
-	}
-};
-
-MODULE_DEVICE_TABLE(pci, pci_id_tbl);
-
-/* Function declared here because of ptr reference below */
-static int  __devinit prism2sta_probe_pci(struct pci_dev *pdev,
-				const struct pci_device_id *id);
-static void  __devexit prism2sta_remove_pci(struct pci_dev *pdev);
-
-static struct pci_driver prism2_pci_drv_id = {
-        .name = "prism2_pci",
-        .id_table = pci_id_tbl,
-        .probe = prism2sta_probe_pci,
-        .remove = prism2sta_remove_pci,
-#ifdef CONFIG_PM
-        .suspend = prism2sta_suspend_pci,
-        .resume = prism2sta_resume_pci,
-#endif
-};
-
-#ifdef MODULE
-
-static int __init prism2pci_init(void)
-{
-        WLAN_LOG_NOTICE("%s Loaded\n", version);
-	return pci_module_init(&prism2_pci_drv_id);
-};
-
-static void __exit prism2pci_cleanup(void)
-{
-	pci_unregister_driver(&prism2_pci_drv_id);
-};
-
-module_init(prism2pci_init);
-module_exit(prism2pci_cleanup);
-
-#endif
-
-int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
-{
-	int		result = 0;
-	unsigned long	timeout;
-	UINT16	reg;
-	DBFENTER;
-
-	/* Assert reset and wait awhile
-	 * (note: these delays are _really_ long, but they appear to be
-	 *        necessary.)
-	 */
-	hfa384x_setreg(hw, 0xc5, HFA384x_PCICOR);
-	timeout = jiffies + HZ/4;
-	while(time_before(jiffies, timeout)) udelay(5);
-
-	if (genesis) {
-		hfa384x_setreg(hw, genesis, HFA384x_PCIHCR);
-		timeout = jiffies + HZ/4;
-		while(time_before(jiffies, timeout)) udelay(5);
-	}
-
-	/* Clear the reset and wait some more
-	 */
-	hfa384x_setreg(hw, 0x45, HFA384x_PCICOR);
-	timeout = jiffies + HZ/2;
-	while(time_before(jiffies, timeout)) udelay(5);
-
-	/* Wait for f/w to complete initialization (CMD:BUSY == 0)
-	 */
-	timeout = jiffies + 2*HZ;
-	reg = hfa384x_getreg(hw, HFA384x_CMD);
-	while ( HFA384x_CMD_ISBUSY(reg) && time_before( jiffies, timeout) ) {
-		reg = hfa384x_getreg(hw, HFA384x_CMD);
-		udelay(10);
-	}
-	if (HFA384x_CMD_ISBUSY(reg)) {
-		WLAN_LOG_WARNING("corereset: Timed out waiting for cmd register.\n");
-		result=1;
-	}
-	DBFEXIT;
-	return result;
-}
diff --git a/drivers/staging/wlan-ng/prism2_plx.c b/drivers/staging/wlan-ng/prism2_plx.c
deleted file mode 100644
index 320443f..0000000
--- a/drivers/staging/wlan-ng/prism2_plx.c
+++ /dev/null
@@ -1,472 +0,0 @@
-#define WLAN_HOSTIF WLAN_PLX
-#include "hfa384x.c"
-#include "prism2mgmt.c"
-#include "prism2mib.c"
-#include "prism2sta.c"
-
-#define PLX_ATTR_SIZE	0x1000	/* Attribute memory size - 4K bytes */
-#define COR_OFFSET	0x3e0	/* COR attribute offset of Prism2 PC card */
-#define COR_VALUE	0x41	/* Enable PC card with irq in level trigger */
-#define PLX_INTCSR	0x4c	/* Interrupt Control and Status Register */
-#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */
-#define PLX_MIN_ATTR_LEN 512    /* at least 2 x 256 is needed for CIS */
-
-/* 3Com 3CRW777A (PLX) board ID */
-#define PCIVENDOR_3COM       0x10B7
-#define PCIDEVICE_AIRCONNECT 0x7770
-
-/* Eumitcom PCI WL11000 PCI Adapter (PLX) board device+vendor ID */
-#define PCIVENDOR_EUMITCOM	0x1638UL
-#define PCIDEVICE_WL11000	0x1100UL
-
-/* Global Sun Tech GL24110P PCI Adapter (PLX) board device+vendor ID */
-#define PCIVENDOR_GLOBALSUN	0x16abUL
-#define PCIDEVICE_GL24110P	0x1101UL
-#define PCIDEVICE_GL24110P_ALT	0x1102UL
-
-/* Netgear MA301 PCI Adapter (PLX) board device+vendor ID */
-#define PCIVENDOR_NETGEAR	0x1385UL
-#define PCIDEVICE_MA301		0x4100UL
-
-/* US Robotics USR2410 PCI Adapter (PLX) board device+vendor ID */
-#define	PCIVENDOR_USROBOTICS    0x16ecUL
-#define PCIDEVICE_USR2410       0x3685UL
-
-/* Linksys WPC11 card with the WDT11 adapter (PLX) board device+vendor ID */
-#define	PCIVENDOR_Linksys       0x16abUL
-#define PCIDEVICE_Wpc11Wdt11    0x1102UL
-
-/* National Datacomm Corp SOHOware Netblaster II PCI */
-#define PCIVENDOR_NDC	        0x15e8UL
-#define PCIDEVICE_NCP130_PLX 	0x0130UL
-#define PCIDEVICE_NCP130_ASIC	0x0131UL
-
-/* NDC NCP130_PLX is also sold by Corega. Their name is CGWLPCIA11 */
-#define PCIVENDOR_COREGA       PCIVENDOR_NDC
-#define PCIDEVICE_CGWLPCIA11   PCIDEVICE_NCP130_PLX
-
-/* PCI Class & Sub-Class code, Network-'Other controller' */
-#define PCI_CLASS_NETWORK_OTHERS 0x280
-
-/*----------------------------------------------------------------
-* prism2sta_probe_plx
-*
-* Probe routine called when a PCI device w/ matching ID is found.
-* This PLX implementation uses the following map:
-*   BAR0: Unused
-*   BAR1: ????
-*   BAR2: PCMCIA attribute memory
-*   BAR3: PCMCIA i/o space
-* Here's the sequence:
-*   - Allocate the PCI resources.
-*   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-*   - Reset the MAC using the PCMCIA COR
-*   - Initialize the netdev and wlan data
-*   - Initialize the MAC
-*
-* Arguments:
-*	pdev		ptr to pci device structure containing info about
-*			pci configuration.
-*	id		ptr to the device id entry that matched this device.
-*
-* Returns:
-*	zero		- success
-*	negative	- failed
-*
-* Side effects:
-*
-*
-* Call context:
-*	process thread
-*
-----------------------------------------------------------------*/
-static int __devinit
-prism2sta_probe_plx(
-	struct pci_dev			*pdev,
-	const struct pci_device_id	*id)
-{
-	int		result;
-        phys_t	pccard_ioaddr;
-	phys_t  pccard_attr_mem;
-        unsigned int    pccard_attr_len;
-	void __iomem *attr_mem = NULL;
-	UINT32		plx_addr;
-        wlandevice_t    *wlandev = NULL;
-	hfa384x_t	*hw = NULL;
-	int		reg;
-        u32		regic;
-
-	if (pci_enable_device(pdev))
-		return -EIO;
-
-	/* TMC7160 boards are special */
-	if ((pdev->vendor == PCIVENDOR_NDC) &&
-	    (pdev->device == PCIDEVICE_NCP130_ASIC)) {
-		unsigned long delay;
-
-		pccard_attr_mem = 0;
-		pccard_ioaddr = pci_resource_start(pdev, 1);
-
-		outb(0x45, pccard_ioaddr);
-		delay = jiffies + 1*HZ;
-		while (time_before(jiffies, delay));
-
-		if (inb(pccard_ioaddr) != 0x45) {
-			WLAN_LOG_ERROR("Initialize the TMC7160 failed. (0x%x)\n", inb(pccard_ioaddr));
-			return -EIO;
-		}
-
-		pccard_ioaddr = pci_resource_start(pdev, 2);
-		prism2_doreset = 0;
-
-		WLAN_LOG_INFO("NDC NCP130 with TMC716(ASIC) PCI interface device found at io:0x%x, irq:%d\n", pccard_ioaddr, pdev->irq);
-		goto init;
-	}
-
-	/* Collect the resource requirements */
-	pccard_attr_mem = pci_resource_start(pdev, 2);
-	pccard_attr_len = pci_resource_len(pdev, 2);
-        if (pccard_attr_len < PLX_MIN_ATTR_LEN)
-		return -EIO;
-
-	pccard_ioaddr = pci_resource_start(pdev, 3);
-
-	/* bjoern: We need to tell the card to enable interrupts, in
-	 * case the serial eprom didn't do this already. See the
-	 * PLX9052 data book, p8-1 and 8-24 for reference.
-	 * [MSM]: This bit of code came from the orinoco_cs driver.
-	 */
-	plx_addr = pci_resource_start(pdev, 1);
-
-	regic = 0;
-	regic = inl(plx_addr+PLX_INTCSR);
-	if(regic & PLX_INTCSR_INTEN) {
-		WLAN_LOG_DEBUG(1,
-			"%s: Local Interrupt already enabled\n", dev_info);
-	} else {
-		regic |= PLX_INTCSR_INTEN;
-		outl(regic, plx_addr+PLX_INTCSR);
-		regic = inl(plx_addr+PLX_INTCSR);
-		if(!(regic & PLX_INTCSR_INTEN)) {
-			WLAN_LOG_ERROR(
-				"%s: Couldn't enable Local Interrupts\n",
-				dev_info);
-			return -EIO;
-		}
-	}
-
-	/* These assignments are here in case of future mappings for
-	 * io space and irq that might be similar to ioremap
-	 */
-        if (!request_mem_region(pccard_attr_mem, pci_resource_len(pdev, 2), "Prism2")) {
-		WLAN_LOG_ERROR("%s: Couldn't reserve PCI memory region\n", dev_info);
-		return -EIO;
-        }
-
-	attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
-
-	WLAN_LOG_INFO("A PLX PCI/PCMCIA interface device found, "
-		"phymem:0x%llx, phyio=0x%x, irq:%d, "
-		"mem: 0x%lx\n",
-		(unsigned long long)pccard_attr_mem, pccard_ioaddr, pdev->irq,
-		(unsigned long)attr_mem);
-
-	/* Verify whether PC card is present.
-	 * [MSM] This needs improvement, the right thing to do is
-	 * probably to walk the CIS looking for the vendor and product
-	 * IDs.  It would be nice if this could be tied in with the
-	 * etc/pcmcia/wlan-ng.conf file.  Any volunteers?  ;-)
-	 */
-	if (
-	readb(attr_mem + 0) != 0x01 || readb(attr_mem + 2) != 0x03 ||
-	readb(attr_mem + 4) != 0x00 || readb(attr_mem + 6) != 0x00 ||
-	readb(attr_mem + 8) != 0xFF || readb(attr_mem + 10) != 0x17 ||
-	readb(attr_mem + 12) != 0x04 || readb(attr_mem + 14) != 0x67) {
-		WLAN_LOG_ERROR("Prism2 PC card CIS is invalid.\n");
-		return -EIO;
-        }
-        WLAN_LOG_INFO("A PCMCIA WLAN adapter was found.\n");
-
-        /* Write COR to enable PC card */
-	writeb(COR_VALUE, attr_mem + COR_OFFSET);
-	reg = readb(attr_mem + COR_OFFSET);
-
- init:
-
-	/*
-	 * Now do everything the same as a PCI device
-	 * [MSM] TODO: We could probably factor this out of pcmcia/pci/plx
-	 * and perhaps usb.  Perhaps a task for another day.......
-	 */
-
-	if ((wlandev = create_wlan()) == NULL) {
-		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
-		result = -EIO;
-		goto failed;
-	}
-
-	hw = wlandev->priv;
-
-	if ( wlan_setup(wlandev) != 0 ) {
-		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
-		result = -EIO;
-		goto failed;
-	}
-
-	/* Setup netdevice's ability to report resources
-	 * Note: the netdevice was allocated by wlan_setup()
-	 */
-        wlandev->netdev->irq = pdev->irq;
-        wlandev->netdev->base_addr = pccard_ioaddr;
-        wlandev->netdev->mem_start = (unsigned long)attr_mem;
-        wlandev->netdev->mem_end = (unsigned long)attr_mem + pci_resource_len(pdev, 0);
-
-	/* Initialize the hw data */
-        hfa384x_create(hw, wlandev->netdev->irq, pccard_ioaddr, attr_mem);
-	hw->wlandev = wlandev;
-
-	/* Register the wlandev, this gets us a name and registers the
-	 * linux netdevice.
-	 */
-	SET_MODULE_OWNER(wlandev->netdev);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-       SET_NETDEV_DEV(wlandev->netdev, &(pdev->dev));
-#endif
-        if ( register_wlandev(wlandev) != 0 ) {
-		WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
-		result = -EIO;
-		goto failed;
-        }
-
-#if 0
-	/* TODO: Move this and an irq test into an hfa384x_testif() routine.
-	 */
-	outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
-	reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
-	if ( reg != PRISM2STA_MAGIC ) {
-		WLAN_LOG_ERROR("MAC register access test failed!\n");
- 		result = -EIO;
-		goto failed;
-	}
-#endif
-
-	/* Do a chip-level reset on the MAC */
-	if (prism2_doreset) {
-		result = hfa384x_corereset(hw,
-				prism2_reset_holdtime,
-				prism2_reset_settletime, 0);
-		if (result != 0) {
-			unregister_wlandev(wlandev);
-			hfa384x_destroy(hw);
-			WLAN_LOG_ERROR(
-				"%s: hfa384x_corereset() failed.\n",
-				dev_info);
-			result = -EIO;
-			goto failed;
-		}
-	}
-
-	pci_set_drvdata(pdev, wlandev);
-
-	/* Shouldn't actually hook up the IRQ until we
-	 * _know_ things are alright.  A test routine would help.
-	 */
-       	request_irq(wlandev->netdev->irq, hfa384x_interrupt,
-		SA_SHIRQ, wlandev->name, wlandev);
-
-	wlandev->msdstate = WLAN_MSD_HWPRESENT;
-
-	result = 0;
-
-	goto done;
-
- failed:
-
-	pci_set_drvdata(pdev, NULL);
-	if (wlandev)	kfree(wlandev);
-	if (hw)		kfree(hw);
-        if (attr_mem)        iounmap(attr_mem);
-	pci_release_regions(pdev);
-        pci_disable_device(pdev);
-
- done:
-	DBFEXIT;
-        return result;
-}
-
-static void __devexit prism2sta_remove_plx(struct pci_dev *pdev)
-{
-       	wlandevice_t		*wlandev;
-	hfa384x_t               *hw;
-
-	wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
-	hw = wlandev->priv;
-
-	p80211netdev_hwremoved(wlandev);
-
-	/* reset hardware */
-	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
-
-        if (pdev->irq)
-		free_irq(pdev->irq, wlandev);
-
-	unregister_wlandev(wlandev);
-
-	/* free local stuff */
-	if (hw) {
-		hfa384x_destroy(hw);
-		kfree(hw);
-	}
-
-	iounmap((void __iomem *)wlandev->netdev->mem_start);
-	wlan_unsetup(wlandev);
-
-	pci_release_regions(pdev);
-        pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-
-	kfree(wlandev);
-}
-
-static struct pci_device_id plx_id_tbl[] = {
-	{
-		PCIVENDOR_EUMITCOM, PCIDEVICE_WL11000,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Eumitcom WL11000 PCI(PLX) card"
-	},
-	{
-		PCIVENDOR_GLOBALSUN, PCIDEVICE_GL24110P,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
-	},
-	{
-		PCIVENDOR_GLOBALSUN, PCIDEVICE_GL24110P_ALT,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
-	},
-	{
-		PCIVENDOR_NETGEAR, PCIDEVICE_MA301,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
-	},
-	{
-		PCIVENDOR_USROBOTICS, PCIDEVICE_USR2410,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"US Robotics USR2410 PCI(PLX) card"
-	},
-	{
-		PCIVENDOR_Linksys, PCIDEVICE_Wpc11Wdt11,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"Linksys WPC11 with WDT11 PCI(PLX) adapter"
-	},
-	{
-	        PCIVENDOR_NDC, PCIDEVICE_NCP130_PLX,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"NDC Netblaster II PCI(PLX)"
-	},
-	{
-	        PCIVENDOR_NDC, PCIDEVICE_NCP130_ASIC,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"NDC Netblaster II PCI(TMC7160)"
-	},
-	{
-		PCIVENDOR_3COM, PCIDEVICE_AIRCONNECT,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		/* Driver data, we just put the name here */
-		(unsigned long)"3Com AirConnect PCI 802.11b 11Mb/s WLAN Controller"
-	},
-	{
-		0, 0, 0, 0, 0, 0, 0
-	}
-};
-
-MODULE_DEVICE_TABLE(pci, plx_id_tbl);
-
-/* Function declared here because of ptr reference below */
-static int __devinit prism2sta_probe_plx(struct pci_dev *pdev,
-					 const struct pci_device_id *);
-static void __devexit prism2sta_remove_plx(struct pci_dev *pdev);
-
-static struct pci_driver prism2_plx_drv_id = {
-        .name = "prism2_plx",
-        .id_table = plx_id_tbl,
-        .probe = prism2sta_probe_plx,
-        .remove = prism2sta_remove_plx,
-#ifdef CONFIG_PM
-        .suspend = prism2sta_suspend_pci,
-        .resume = prism2sta_resume_pci,
-#endif
-};
-
-#ifdef MODULE
-
-static int __init prism2plx_init(void)
-{
-        WLAN_LOG_NOTICE("%s Loaded\n", version);
-	return pci_module_init(&prism2_plx_drv_id);
-};
-
-static void __exit prism2plx_cleanup(void)
-{
-	pci_unregister_driver(&prism2_plx_drv_id);
-};
-
-module_init(prism2plx_init);
-module_exit(prism2plx_cleanup);
-
-#endif // MODULE
-
-
-int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
-{
-	int		result = 0;
-
-#define COR_OFFSET	0x3e0	/* COR attribute offset of Prism2 PC card */
-#define COR_VALUE	0x41	/* Enable PC card with irq in level trigger */
-
-#define HCR_OFFSET	0x3e2	/* HCR attribute offset of Prism2 PC card */
-
-	UINT8		corsave;
-	DBFENTER;
-
-	WLAN_LOG_DEBUG(3, "Doing reset via direct COR access.\n");
-
-	/* Collect COR */
-	corsave = readb(hw->membase + COR_OFFSET);
-	/* Write reset bit (BIT7) */
-	writeb(corsave | BIT7, hw->membase + COR_OFFSET);
-	/* Hold for holdtime */
-	mdelay(holdtime);
-
-	if (genesis) {
-		writeb(genesis, hw->membase + HCR_OFFSET);
-		/* Hold for holdtime */
-		mdelay(holdtime);
-	}
-
-	/* Clear reset bit */
-	writeb(corsave & ~BIT7, hw->membase + COR_OFFSET);
-	/* Wait for settletime */
-	mdelay(settletime);
-	/* Set non-reset bits back what they were */
-	writeb(corsave, hw->membase + COR_OFFSET);
-	DBFEXIT;
-	return result;
-}