diff options
| author | Douglas Gilbert <dgilbert@interlog.com> | 2015-11-16 18:22:08 (GMT) |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2015-11-17 17:35:49 (GMT) |
| commit | d134c48d889ddceadf4c990e6f3df16b816ed5d4 (patch) | |
| tree | 13fa3441bafe3bd18753bb4bacd9823943ec6146 | |
| parent | 51676c8d6daac6dd11f768cb26db8d5b572f65b4 (diff) | |
| download | linux-d134c48d889ddceadf4c990e6f3df16b816ed5d4.tar.xz | |
usb: gadget: atmel_usba_udc: Expose correct device speed
Following changes that appeared in lk 4.0.0, the gadget udc driver for
some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families)
incorrectly deduced full-speed USB link speed even when the hardware
had negotiated a high-speed link. The fix is to make sure that the
UDPHS Interrupt Enable Register value does not mask the SPEED bit
in the Interrupt Status Register.
For a mass storage gadget this problem lead to failures when the host
had a USB 3 port with the xhci_hcd driver. If the host was a USB 2
port using the ehci_hcd driver then the mass storage gadget worked
(but probably at a lower speed than it should have).
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> #4.0+
Fixes: 9870d895ad87 ("usb: atmel_usba_udc: Mask status with enabled irqs")
Signed-off-by: Felipe Balbi <balbi@ti.com>
| -rw-r--r-- | drivers/usb/gadget/udc/atmel_usba_udc.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index f0f2b06..f92f5af 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1633,7 +1633,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); int_enb = usba_int_enb_get(udc); - status = usba_readl(udc, INT_STA) & int_enb; + status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { |