Merge tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Assorted bunch of 32bit Rockchip devicetree changes. More clocks,
nodes and fixes like the increased drive-strength on the firefly.
Most interesting is maybe the enablement of the pl330 option
for handling the broken flushp operation that is present on the
current Rockchip SoCs. Together with the driver-side enablement
this should give us working dma finally.

* tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (30 commits)
  ARM: dts: cros-ec-keyboard: Add LOCK key to keyboard matrix
  ARM: dts: rockchip: replace gpio-key,wakeup with wakeup-source property
  ARM: dts: rockchip: add arm,pl330-broken-no-flushp quirk for rk3036 SoCs
  ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3xxx platform
  ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3288 platform
  dt-bindings: rockchip-dw-mshc: add RK3036 dw-mshc description
  ARM: dts: rockchip: increase the mclk_fs to 512 for kylin board
  ARM: dts: rockchip: support the spi for rk3036
  ARM: dts: rockchip: add mclk for rt5616 on rk3036 kylin board
  ARM: dts: rockchip: add the leds control for rk3036-kylin board
  ARM: dts: rockchip: add tsadc node
  clk: rockchip: Add new id for rk3066 tsadc clock
  ARM: dts: rockchip: add clock-cells for usb phy nodes
  ARM: dts: rockchip: Assign RK3288 EDP_24M input centrally
  ARM: dts: rockchip: add soc-specific compatibles for rk3036 SoCs
  ARM: dts: rockchip: Bump sd card pin drive strength up on firefly boards
  dt-bindings: rockchip-dw-mshc: add RK3368 dw-mshc description
  ARM: dts: rockchip: Add the SDIO wifi on Radxa Rock2 square
  ARM: dts: rockchip: Add the iodomains for the Rock2 SOM
  ARM: dts: rockchip: add rk3288 mipi_dsi nodes
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

21 files changed, 389 insertions, 35 deletions

diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index 3dc13b6..ea5614b 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -13,6 +13,8 @@ Required Properties:
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
+	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
+	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 
 Optional Properties:
 * clocks: from common clock binding: if ciu_drive and ciu_sample are
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 4e42f30c..c045105 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -55,6 +55,7 @@
 			MATRIX_KEY(0x03, 0x04, KEY_F5)
 			MATRIX_KEY(0x03, 0x06, KEY_6)
 			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+			MATRIX_KEY(0x03, 0x09, KEY_F13)
 			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
 			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
 
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 992f9ca..d5913fe 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -46,6 +46,58 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		work {
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			label = "kylin:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - SDIO_RESET_L_WL_RST
+		 * - SDIO_RESET_L_BT_EN
+		 */
+		reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+			      <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
+			      <&gpio2 9  GPIO_ACTIVE_LOW>; /* BT_EN */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,rt5616-codec";
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC1", "Microphone Jack",
+			"MIC2", "Microphone Jack",
+			"Microphone Jack", "micbias1",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5616>;
+		};
+	};
+
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -257,6 +309,19 @@
 
 &i2c2 {
 	status = "okay";
+
+	rt5616: rt5616@1b {
+		compatible = "rt5616";
+		reg = <0x1b>;
+		clocks = <&cru SCLK_I2S_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
 };
 
 &sdio {
@@ -264,13 +329,34 @@
 
 	broken-cd;
 	bus-width = <4>;
+	cap-sd-highspeed;
 	cap-sdio-irq;
 	default-sample-phase = <90>;
 	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+};
+
+&uart0 {
+	status = "okay";
 };
 
 &uart2 {
@@ -286,12 +372,30 @@
 };
 
 &pinctrl {
+	leds {
+		led_ctl: led-ctl {
+			rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
 		};
 	};
 
+	sdio {
+		bt_wake_h: bt-wake-h {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sleep {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..3864fa1 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -60,6 +60,7 @@
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
+		spi = &spi;
 	};
 
 	memory {
@@ -105,6 +106,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC2>;
 			clock-names = "apb_pclk";
 		};
@@ -161,7 +163,7 @@
 	};
 
 	usb_otg: usb@10180000 {
-		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
 				"snps,dwc2";
 		reg = <0x10180000 0x40000>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -176,7 +178,7 @@
 	};
 
 	usb_host: usb@101c0000 {
-		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
 				"snps,dwc2";
 		reg = <0x101c0000 0x40000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -211,7 +213,7 @@
 	};
 
 	emmc: dwmmc@1021c000 {
-		compatible = "rockchip,rk3288-dw-mshc";
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x1021c000 0x4000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		broken-cd;
@@ -241,8 +243,8 @@
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
 		dmas = <&pdma 0>, <&pdma 1>;
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
@@ -327,7 +329,7 @@
 	};
 
 	i2c1: i2c@20056000 {
-		compatible = "rockchip,rk3288-i2c";
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
 		reg = <0x20056000 0x1000>;
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -340,7 +342,7 @@
 	};
 
 	i2c2: i2c@2005a000 {
-		compatible = "rockchip,rk3288-i2c";
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
 		reg = <0x2005a000 0x1000>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -395,7 +397,7 @@
 	};
 
 	i2c0: i2c@20072000 {
-		compatible = "rockchip,rk3288-i2c";
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
 		reg = <0x20072000 0x1000>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -407,6 +409,21 @@
 		status = "disabled";
 	};
 
+	spi: spi@20074000 {
+		compatible = "rockchip,rockchip-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
+		clock-names = "apb-pclk","spi_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3036-pinctrl";
 		rockchip,grf = <&grf>;
@@ -579,12 +596,12 @@
 
 		i2s {
 			i2s_bus: i2s-bus {
-				rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
-						<1 1 RK_FUNC_1 &pcfg_pull_none>,
-						<1 2 RK_FUNC_1 &pcfg_pull_none>,
-						<1 3 RK_FUNC_1 &pcfg_pull_none>,
-						<1 4 RK_FUNC_1 &pcfg_pull_none>,
-						<1 5 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
+						<1 1 RK_FUNC_1 &pcfg_pull_default>,
+						<1 2 RK_FUNC_1 &pcfg_pull_default>,
+						<1 3 RK_FUNC_1 &pcfg_pull_default>,
+						<1 4 RK_FUNC_1 &pcfg_pull_default>,
+						<1 5 RK_FUNC_1 &pcfg_pull_default>;
 			};
 		};
 
@@ -618,5 +635,29 @@
 			};
 			/* no rts / cts for uart2 */
 		};
+
+		spi {
+			spi_txd:spi-txd {
+				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
+			};
+
+			spi_rxd:spi-rxd {
+				rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
+			};
+
+			spi_clk:spi-clk {
+				rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			spi_cs0:spi-cs0 {
+				rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
+
+			};
+
+			spi_cs1:spi-cs1 {
+				rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
+
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 38c91a8..6d2a5b3 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -53,6 +53,18 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vcc_sd0: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
@@ -74,7 +86,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 		button@1 {
@@ -82,7 +94,6 @@
 			linux,code = <104>;
 			label = "GPIO Key Vol-";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <0>;
 			debounce-interval = <100>;
 		};
 		/* VOL+ comes somehow thru the ADC */
@@ -203,6 +214,10 @@
 	disable-wp;
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 7cdc308..a2b763e 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -52,6 +52,18 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vcc_sd0: sdmmc-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
@@ -194,6 +206,10 @@
 	};
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 341c1f8..0553300 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -65,7 +65,7 @@
 		#size-cells = <0>;
 
 		button@0 {
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <116>;
@@ -74,6 +74,18 @@
 		};
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vsys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
@@ -431,6 +443,10 @@
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_25>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 58bac50..cb0a552 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -61,11 +61,13 @@
 			reg = <0x0>;
 			operating-points = <
 				/* kHz    uV */
-				1008000 1075000
-				 816000 1025000
-				 600000 1025000
-				 504000 1000000
-				 312000  975000
+				1416000 1300000
+				1200000 1175000
+				1008000 1125000
+				816000  1125000
+				600000  1100000
+				504000  1100000
+				312000  1075000
 			>;
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
@@ -188,6 +190,16 @@
 		clock-names = "timer", "pclk";
 	};
 
+	tsadc: tsadc@20060000 {
+		compatible = "rockchip,rk3066-tsadc";
+		reg = <0x20060000 0x100>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "saradc", "apb_pclk";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
 	usbphy: phy {
 		compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
 		rockchip,grf = <&grf>;
@@ -200,6 +212,7 @@
 			reg = <0x17c>;
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy1: usb-phy1 {
@@ -207,6 +220,7 @@
 			reg = <0x188>;
 			clocks = <&cru SCLK_OTGPHY1>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 66fa87d..0b6924c 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -63,7 +63,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 348d46b..9271833 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -171,6 +171,7 @@
 			reg = <0x10c>;
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy1: usb-phy1 {
@@ -178,6 +179,7 @@
 			reg = <0x11c>;
 			clocks = <&cru SCLK_OTGPHY1>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 4faabdb..78d47f7 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -110,7 +110,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 4e3fd9a..98c586a4 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -91,7 +91,7 @@
 		#size-cells = <0>;
 
 		button@0 {
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <116>;
@@ -408,6 +408,11 @@
 		output-low;
 	};
 
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
 	act8846 {
 		pwr_hold: pwr-hold {
 			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
@@ -457,6 +462,25 @@
 	};
 
 	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
 		sdmmc_pwr: sdmmc-pwr {
 			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 65c4756..2ff9689 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -74,7 +74,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 17f13c7..510a1d0 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -73,7 +73,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 1ece66f..e1ee9f9 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -61,6 +61,31 @@
 		clock-output-names = "ext_gmac";
 	};
 
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcc_io>;
+		bb-supply = <&vcc_io>;
+		dvp-supply = <&vcc_18>;
+		flash0-supply = <&vcc_flash>;
+		flash1-supply = <&vccio_pmu>;
+		gpio30-supply = <&vccio_pmu>;
+		gpio1830 = <&vcc_io>;
+		lcdc-supply = <&vcc_io>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vcc_18>;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <150>;
+		vin-supply = <&vcc_io>;
+	};
+
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -85,6 +110,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index c5453a0..dd3ad2e 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -49,6 +49,22 @@
 		stdout-path = "serial2:115200n8";
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			label = "rock2:green:state1";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			label = "rock2:blue:state2";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
 	ir: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
@@ -70,6 +86,15 @@
 		#sound-dai-cells = <0>;
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
 	vcc_usb_host: vcc-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -95,6 +120,21 @@
 	};
 };
 
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	status = "okay";
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -119,7 +159,7 @@
 };
 
 &i2c0 {
-	hym8563@51 {
+	hym8563: hym8563@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
@@ -161,6 +201,12 @@
 			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &spdif {
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 136d650..610769d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -108,7 +108,7 @@
 	lid {
 		label = "Lid";
 		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 		linux,code = <0>; /* SW_LID */
 		linux,input-type = <5>; /* EV_SW */
 		debounce-interval = <1>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 9fce91f..0350f79 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -64,7 +64,7 @@
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -340,11 +340,6 @@
 	i2c-scl-rising-time-ns = <1000>;
 };
 
-&power {
-	assigned-clocks = <&cru SCLK_EDP_24M>;
-	assigned-clock-parents = <&xin24m>;
-};
-
 &pwm1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 8ac49f3..0934b6a 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -145,6 +145,7 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC2>;
 			clock-names = "apb_pclk";
 		};
@@ -155,6 +156,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -166,6 +168,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 		};
@@ -630,6 +633,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			assigned-clocks = <&cru SCLK_EDP_24M>;
+			assigned-clock-parents = <&xin24m>;
+
 			/*
 			 * Note: Although SCLK_* are the working clocks
 			 * of device without including on the NOC, needed for
@@ -815,6 +821,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+			vopb_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
 		};
 	};
 
@@ -848,6 +858,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+			vopl_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
 		};
 	};
 
@@ -861,6 +875,37 @@
 		status = "disabled";
 	};
 
+	mipi_dsi: mipi@ff960000 {
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
 	hdmi: hdmi@ff980000 {
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0xff980000 0x20000>;
@@ -926,6 +971,7 @@
 			reg = <0x320>;
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy1: usb-phy1 {
@@ -933,6 +979,7 @@
 			reg = <0x334>;
 			clocks = <&cru SCLK_OTGPHY1>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy2: usb-phy2 {
@@ -940,6 +987,7 @@
 			reg = <0x348>;
 			clocks = <&cru SCLK_OTGPHY2>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 99eeea7..f1581f9 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -78,6 +78,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 		};
@@ -88,6 +89,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -99,6 +101,7 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA2>;
 			clock-names = "apb_pclk";
 		};
diff --git a/include/dt-bindings/clock/rk3188-cru-common.h b/include/dt-bindings/clock/rk3188-cru-common.h
index 8df77a7..4f53e70 100644
--- a/include/dt-bindings/clock/rk3188-cru-common.h
+++ b/include/dt-bindings/clock/rk3188-cru-common.h
@@ -55,6 +55,7 @@
 #define SCLK_TIMER6		90
 #define SCLK_JTAG		91
 #define SCLK_SMC		92
+#define SCLK_TSADC		93
 
 #define DCLK_LCDC0		190
 #define DCLK_LCDC1		191