Merge branch 'renesas-soc-core' into renesas-sh73a0

* renesas-soc-core:
  ARM: shmobile: add common DMAEngine definitions
  ARM: shmobile: add common extra gpio functions

2 files changed, 116 insertions, 0 deletions

diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/include/mach/dma-register.h
new file mode 100644
index 0000000..97c40bd
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/dma-register.h
@@ -0,0 +1,84 @@
+/*
+ * SH-ARM CPU-specific DMA definitions, used by both DMA drivers
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp
+ *
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DMA_REGISTER_H
+#define DMA_REGISTER_H
+
+/*
+ *		Direct Memory Access Controller
+ */
+
+/* Transmit sizes and respective CHCR register values */
+enum {
+	XMIT_SZ_8BIT		= 0,
+	XMIT_SZ_16BIT		= 1,
+	XMIT_SZ_32BIT		= 2,
+	XMIT_SZ_64BIT		= 7,
+	XMIT_SZ_128BIT		= 3,
+	XMIT_SZ_256BIT		= 4,
+	XMIT_SZ_512BIT		= 5,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+static const unsigned int dma_ts_shift[] = {
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_64BIT]		= 3,
+	[XMIT_SZ_128BIT]	= 4,
+	[XMIT_SZ_256BIT]	= 5,
+	[XMIT_SZ_512BIT]	= 6,
+};
+
+#define TS_LOW_BIT	0x3 /* --xx */
+#define TS_HI_BIT	0xc /* xx-- */
+
+#define TS_LOW_SHIFT	(3)
+#define TS_HI_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
+
+#define TS_INDEX2VAL(i) \
+	((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
+	 (((i) & TS_HI_BIT)  << TS_HI_SHIFT))
+
+#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
+
+
+/*
+ *		USB High-Speed DMAC
+ */
+/* Transmit sizes and respective CHCR register values */
+enum {
+	USBTS_XMIT_SZ_8BYTE		= 0,
+	USBTS_XMIT_SZ_16BYTE		= 1,
+	USBTS_XMIT_SZ_32BYTE		= 2,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+static const unsigned int dma_usbts_shift[] = {
+	[USBTS_XMIT_SZ_8BYTE]	= 3,
+	[USBTS_XMIT_SZ_16BYTE]	= 4,
+	[USBTS_XMIT_SZ_32BYTE]	= 5,
+};
+
+#define USBTS_LOW_BIT	0x3 /* --xx */
+#define USBTS_HI_BIT	0x0 /* ---- */
+
+#define USBTS_LOW_SHIFT	6
+#define USBTS_HI_SHIFT	0
+
+#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
+
+#endif /* DMA_REGISTER_H */
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index de795b4..844507d 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/sh_pfc.h>
+#include <linux/io.h>
 
 #ifdef CONFIG_GPIOLIB
 
@@ -27,4 +28,35 @@ static inline int irq_to_gpio(unsigned int irq)
 
 #endif /* CONFIG_GPIOLIB */
 
+/*
+ * FIXME !!
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static inline void __init gpio_direction_none(u32 addr)
+{
+	__raw_writeb(0x00, addr);
+}
+
+static inline void __init gpio_request_pullup(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xC0;
+	__raw_writeb(data, addr);
+}
+
+static inline void __init gpio_request_pulldown(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xA0;
+
+	__raw_writeb(data, addr);
+}
+
 #endif /* __ASM_ARCH_GPIO_H */