diff options
author | David Decotigny <decot@google.com> | 2011-04-27 18:32:43 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2011-04-29 21:03:03 (GMT) |
commit | 14ad2513ed5b709e566a853f4b515d91c5d83311 (patch) | |
tree | 19ce2e6deefaa0725533612df85c51b99d2513cb | |
parent | fbef7139a8b89a7f49ba1410593ed894b4c8b017 (diff) | |
download | linux-14ad2513ed5b709e566a853f4b515d91c5d83311.tar.xz |
net/igb/e1000/e1000e: more robust ethtool duplex/speed configuration
This makes sure that one cannot request a 99Mbps full-duplex and get a
100Mbps half-duplex configuration in return due to the way the
speed/duplex parameters are handled internally.
Tested: e1000 works
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/e1000/e1000.h | 2 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 2 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 42 | ||||
-rw-r--r-- | drivers/net/e1000e/ethtool.c | 24 | ||||
-rw-r--r-- | drivers/net/igb/igb.h | 2 | ||||
-rw-r--r-- | drivers/net/igb/igb_ethtool.c | 2 | ||||
-rw-r--r-- | drivers/net/igb/igb_main.c | 23 |
7 files changed, 59 insertions, 38 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index a881dd0..b1b23dd 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -349,7 +349,7 @@ extern int e1000_up(struct e1000_adapter *adapter); extern void e1000_down(struct e1000_adapter *adapter); extern void e1000_reinit_locked(struct e1000_adapter *adapter); extern void e1000_reset(struct e1000_adapter *adapter); -extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx); +extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx); extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter); diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 127fef4..4fa727c 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -199,7 +199,7 @@ static int e1000_set_settings(struct net_device *netdev, ecmd->advertising = hw->autoneg_advertised; } else { u32 speed = ethtool_cmd_speed(ecmd); - if (e1000_set_spd_dplx(adapter, speed + ecmd->duplex)) { + if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { clear_bit(__E1000_RESETTING, &adapter->flags); return -EINVAL; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 477e066..c18cb8e 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -96,7 +96,6 @@ int e1000_up(struct e1000_adapter *adapter); void e1000_down(struct e1000_adapter *adapter); void e1000_reinit_locked(struct e1000_adapter *adapter); void e1000_reset(struct e1000_adapter *adapter); -int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx); int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); void e1000_free_all_tx_resources(struct e1000_adapter *adapter); @@ -4385,7 +4384,6 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, struct mii_ioctl_data *data = if_mii(ifr); int retval; u16 mii_reg; - u16 spddplx; unsigned long flags; if (hw->media_type != e1000_media_type_copper) @@ -4424,17 +4422,18 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, hw->autoneg = 1; hw->autoneg_advertised = 0x2F; } else { + u32 speed; if (mii_reg & 0x40) - spddplx = SPEED_1000; + speed = SPEED_1000; else if (mii_reg & 0x2000) - spddplx = SPEED_100; + speed = SPEED_100; else - spddplx = SPEED_10; - spddplx += (mii_reg & 0x100) - ? DUPLEX_FULL : - DUPLEX_HALF; - retval = e1000_set_spd_dplx(adapter, - spddplx); + speed = SPEED_10; + retval = e1000_set_spd_dplx( + adapter, speed, + ((mii_reg & 0x100) + ? DUPLEX_FULL : + DUPLEX_HALF)); if (retval) return retval; } @@ -4596,20 +4595,24 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter) } } -int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) +int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) { struct e1000_hw *hw = &adapter->hw; hw->autoneg = 0; + /* Make sure dplx is at most 1 bit and lsb of speed is not set + * for the switch() below to work */ + if ((spd & 1) || (dplx & ~1)) + goto err_inval; + /* Fiber NICs only allow 1000 gbps Full duplex */ if ((hw->media_type == e1000_media_type_fiber) && - spddplx != (SPEED_1000 + DUPLEX_FULL)) { - e_err(probe, "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - } + spd != SPEED_1000 && + dplx != DUPLEX_FULL) + goto err_inval; - switch (spddplx) { + switch (spd + dplx) { case SPEED_10 + DUPLEX_HALF: hw->forced_speed_duplex = e1000_10_half; break; @@ -4628,10 +4631,13 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - e_err(probe, "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; + goto err_inval; } return 0; + +err_inval: + e_err(probe, "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; } static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 12f1ee2..859d0d3 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -200,20 +200,25 @@ static int e1000_get_settings(struct net_device *netdev, return 0; } -static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) +static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) { struct e1000_mac_info *mac = &adapter->hw.mac; mac->autoneg = 0; + /* Make sure dplx is at most 1 bit and lsb of speed is not set + * for the switch() below to work */ + if ((spd & 1) || (dplx & ~1)) + goto err_inval; + /* Fiber NICs only allow 1000 gbps Full duplex */ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && - spddplx != (SPEED_1000 + DUPLEX_FULL)) { - e_err("Unsupported Speed/Duplex configuration\n"); - return -EINVAL; + spd != SPEED_1000 && + dplx != DUPLEX_FULL) { + goto err_inval; } - switch (spddplx) { + switch (spd + dplx) { case SPEED_10 + DUPLEX_HALF: mac->forced_speed_duplex = ADVERTISE_10_HALF; break; @@ -232,10 +237,13 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - e_err("Unsupported Speed/Duplex configuration\n"); - return -EINVAL; + goto err_inval; } return 0; + +err_inval: + e_err("Unsupported Speed/Duplex configuration\n"); + return -EINVAL; } static int e1000_set_settings(struct net_device *netdev, @@ -272,7 +280,7 @@ static int e1000_set_settings(struct net_device *netdev, hw->fc.requested_mode = e1000_fc_default; } else { u32 speed = ethtool_cmd_speed(ecmd); - if (e1000_set_spd_dplx(adapter, speed + ecmd->duplex)) { + if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { clear_bit(__E1000_RESETTING, &adapter->state); return -EINVAL; } diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 1c687e2..f4fa4b1 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -360,7 +360,7 @@ extern int igb_up(struct igb_adapter *); extern void igb_down(struct igb_adapter *); extern void igb_reinit_locked(struct igb_adapter *); extern void igb_reset(struct igb_adapter *); -extern int igb_set_spd_dplx(struct igb_adapter *, u16); +extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8); extern int igb_setup_tx_resources(struct igb_ring *); extern int igb_setup_rx_resources(struct igb_ring *); extern void igb_free_tx_resources(struct igb_ring *); diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 023aa9b..6e29634 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -224,7 +224,7 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) hw->fc.requested_mode = e1000_fc_default; } else { u32 speed = ethtool_cmd_speed(ecmd); - if (igb_set_spd_dplx(adapter, speed + ecmd->duplex)) { + if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) { clear_bit(__IGB_RESETTING, &adapter->state); return -EINVAL; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index cdfd572..ce7838e 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -6349,21 +6349,25 @@ static void igb_restore_vlan(struct igb_adapter *adapter) } } -int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) +int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx) { struct pci_dev *pdev = adapter->pdev; struct e1000_mac_info *mac = &adapter->hw.mac; mac->autoneg = 0; + /* Make sure dplx is at most 1 bit and lsb of speed is not set + * for the switch() below to work */ + if ((spd & 1) || (dplx & ~1)) + goto err_inval; + /* Fiber NIC's only allow 1000 Gbps Full duplex */ if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) && - spddplx != (SPEED_1000 + DUPLEX_FULL)) { - dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - } + spd != SPEED_1000 && + dplx != DUPLEX_FULL) + goto err_inval; - switch (spddplx) { + switch (spd + dplx) { case SPEED_10 + DUPLEX_HALF: mac->forced_speed_duplex = ADVERTISE_10_HALF; break; @@ -6382,10 +6386,13 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; + goto err_inval; } return 0; + +err_inval: + dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; } static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake) |