diff options
author | Geert Uytterhoeven <geert@linux-m68k.org> | 2010-04-04 09:00:35 (GMT) |
---|---|---|
committer | James Bottomley <James.Bottomley@suse.de> | 2010-05-02 19:55:17 (GMT) |
commit | 21351013402ab4556d1ef62aed6cbe8dfb809f77 (patch) | |
tree | 1fc91dfe92457cb656c19ea451cac04c72781a22 | |
parent | be4540db062975ce557daf0119153fb17ecd6693 (diff) | |
download | linux-21351013402ab4556d1ef62aed6cbe8dfb809f77.tar.xz |
[SCSI] a3000: Reindentation
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-rw-r--r-- | drivers/scsi/a3000.c | 280 | ||||
-rw-r--r-- | drivers/scsi/a3000.h | 46 |
2 files changed, 163 insertions, 163 deletions
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index 2915684..31434f7 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -19,26 +19,26 @@ #include "wd33c93.h" #include "a3000.h" -#include<linux/stat.h> +#include <linux/stat.h> -#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base)) -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) + +#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base)) +#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) static struct Scsi_Host *a3000_host = NULL; static int a3000_release(struct Scsi_Host *instance); -static irqreturn_t a3000_intr (int irq, void *dummy) +static irqreturn_t a3000_intr(int irq, void *dummy) { unsigned long flags; unsigned int status = DMA(a3000_host)->ISTR; if (!(status & ISTR_INT_P)) return IRQ_NONE; - if (status & ISTR_INTS) - { + if (status & ISTR_INTS) { spin_lock_irqsave(a3000_host->host_lock, flags); - wd33c93_intr (a3000_host); + wd33c93_intr(a3000_host); spin_unlock_irqrestore(a3000_host->host_lock, flags); return IRQ_HANDLED; } @@ -48,161 +48,161 @@ static irqreturn_t a3000_intr (int irq, void *dummy) static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { - unsigned short cntr = CNTR_PDMD | CNTR_INTEN; - unsigned long addr = virt_to_bus(cmd->SCp.ptr); - - /* - * if the physical address has the wrong alignment, or if - * physical address is bad, or if it is a write and at the - * end of a physical memory chunk, then allocate a bounce - * buffer - */ - if (addr & A3000_XFER_MASK) - { - HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511) - & ~0x1ff; - HDATA(a3000_host)->dma_bounce_buffer = - kmalloc (HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL); - - /* can't allocate memory; use PIO */ - if (!HDATA(a3000_host)->dma_bounce_buffer) { - HDATA(a3000_host)->dma_bounce_len = 0; - return 1; - } - - if (!dir_in) { - /* copy to bounce buffer for a write */ - memcpy (HDATA(a3000_host)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); + unsigned short cntr = CNTR_PDMD | CNTR_INTEN; + unsigned long addr = virt_to_bus(cmd->SCp.ptr); + + /* + * if the physical address has the wrong alignment, or if + * physical address is bad, or if it is a write and at the + * end of a physical memory chunk, then allocate a bounce + * buffer + */ + if (addr & A3000_XFER_MASK) { + HDATA(a3000_host)->dma_bounce_len = + (cmd->SCp.this_residual + 511) & ~0x1ff; + HDATA(a3000_host)->dma_bounce_buffer = + kmalloc(HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL); + + /* can't allocate memory; use PIO */ + if (!HDATA(a3000_host)->dma_bounce_buffer) { + HDATA(a3000_host)->dma_bounce_len = 0; + return 1; + } + + if (!dir_in) { + /* copy to bounce buffer for a write */ + memcpy(HDATA(a3000_host)->dma_bounce_buffer, + cmd->SCp.ptr, cmd->SCp.this_residual); + } + + addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); } - addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); - } - - /* setup dma direction */ - if (!dir_in) - cntr |= CNTR_DDIR; + /* setup dma direction */ + if (!dir_in) + cntr |= CNTR_DDIR; - /* remember direction */ - HDATA(a3000_host)->dma_dir = dir_in; + /* remember direction */ + HDATA(a3000_host)->dma_dir = dir_in; - DMA(a3000_host)->CNTR = cntr; + DMA(a3000_host)->CNTR = cntr; - /* setup DMA *physical* address */ - DMA(a3000_host)->ACR = addr; + /* setup DMA *physical* address */ + DMA(a3000_host)->ACR = addr; - if (dir_in) - /* invalidate any cache */ - cache_clear (addr, cmd->SCp.this_residual); - else - /* push any dirty cache */ - cache_push (addr, cmd->SCp.this_residual); + if (dir_in) { + /* invalidate any cache */ + cache_clear(addr, cmd->SCp.this_residual); + } else { + /* push any dirty cache */ + cache_push(addr, cmd->SCp.this_residual); + } - /* start DMA */ - mb(); /* make sure setup is completed */ - DMA(a3000_host)->ST_DMA = 1; - mb(); /* make sure DMA has started before next IO */ + /* start DMA */ + mb(); /* make sure setup is completed */ + DMA(a3000_host)->ST_DMA = 1; + mb(); /* make sure DMA has started before next IO */ - /* return success */ - return 0; + /* return success */ + return 0; } static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { - /* disable SCSI interrupts */ - unsigned short cntr = CNTR_PDMD; - - if (!HDATA(instance)->dma_dir) - cntr |= CNTR_DDIR; - - DMA(instance)->CNTR = cntr; - mb(); /* make sure CNTR is updated before next IO */ - - /* flush if we were reading */ - if (HDATA(instance)->dma_dir) { - DMA(instance)->FLUSH = 1; - mb(); /* don't allow prefetch */ - while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) - barrier(); - mb(); /* no IO until FLUSH is done */ - } - - /* clear a possible interrupt */ - /* I think that this CINT is only necessary if you are - * using the terminal count features. HM 7 Mar 1994 - */ - DMA(instance)->CINT = 1; - - /* stop DMA */ - DMA(instance)->SP_DMA = 1; - mb(); /* make sure DMA is stopped before next IO */ - - /* restore the CONTROL bits (minus the direction flag) */ - DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; - mb(); /* make sure CNTR is updated before next IO */ - - /* copy from a bounce buffer, if necessary */ - if (status && HDATA(instance)->dma_bounce_buffer) { - if (SCpnt) { - if (HDATA(instance)->dma_dir && SCpnt) - memcpy (SCpnt->SCp.ptr, - HDATA(instance)->dma_bounce_buffer, - SCpnt->SCp.this_residual); - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; - } else { - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; + /* disable SCSI interrupts */ + unsigned short cntr = CNTR_PDMD; + + if (!HDATA(instance)->dma_dir) + cntr |= CNTR_DDIR; + + DMA(instance)->CNTR = cntr; + mb(); /* make sure CNTR is updated before next IO */ + + /* flush if we were reading */ + if (HDATA(instance)->dma_dir) { + DMA(instance)->FLUSH = 1; + mb(); /* don't allow prefetch */ + while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) + barrier(); + mb(); /* no IO until FLUSH is done */ + } + + /* clear a possible interrupt */ + /* I think that this CINT is only necessary if you are + * using the terminal count features. HM 7 Mar 1994 + */ + DMA(instance)->CINT = 1; + + /* stop DMA */ + DMA(instance)->SP_DMA = 1; + mb(); /* make sure DMA is stopped before next IO */ + + /* restore the CONTROL bits (minus the direction flag) */ + DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; + mb(); /* make sure CNTR is updated before next IO */ + + /* copy from a bounce buffer, if necessary */ + if (status && HDATA(instance)->dma_bounce_buffer) { + if (SCpnt) { + if (HDATA(instance)->dma_dir && SCpnt) + memcpy(SCpnt->SCp.ptr, + HDATA(instance)->dma_bounce_buffer, + SCpnt->SCp.this_residual); + kfree(HDATA(instance)->dma_bounce_buffer); + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; + } else { + kfree(HDATA(instance)->dma_bounce_buffer); + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; + } } - } } static int __init a3000_detect(struct scsi_host_template *tpnt) { - wd33c93_regs regs; - - if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI)) - return 0; - if (!request_mem_region(0xDD0000, 256, "wd33c93")) - return 0; - - tpnt->proc_name = "A3000"; - tpnt->proc_info = &wd33c93_proc_info; - - a3000_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata)); - if (a3000_host == NULL) - goto fail_register; - - a3000_host->base = ZTWO_VADDR(0xDD0000); - a3000_host->irq = IRQ_AMIGA_PORTS; - DMA(a3000_host)->DAWR = DAWR_A3000; - regs.SASR = &(DMA(a3000_host)->SASR); - regs.SCMD = &(DMA(a3000_host)->SCMD); - HDATA(a3000_host)->no_sync = 0xff; - HDATA(a3000_host)->fast = 0; - HDATA(a3000_host)->dma_mode = CTRL_DMA; - wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); - if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", - a3000_intr)) - goto fail_irq; - DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN; - - return 1; + wd33c93_regs regs; + + if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI)) + return 0; + if (!request_mem_region(0xDD0000, 256, "wd33c93")) + return 0; + + tpnt->proc_name = "A3000"; + tpnt->proc_info = &wd33c93_proc_info; + + a3000_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); + if (a3000_host == NULL) + goto fail_register; + + a3000_host->base = ZTWO_VADDR(0xDD0000); + a3000_host->irq = IRQ_AMIGA_PORTS; + DMA(a3000_host)->DAWR = DAWR_A3000; + regs.SASR = &(DMA(a3000_host)->SASR); + regs.SCMD = &(DMA(a3000_host)->SCMD); + HDATA(a3000_host)->no_sync = 0xff; + HDATA(a3000_host)->fast = 0; + HDATA(a3000_host)->dma_mode = CTRL_DMA; + wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); + if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", + a3000_intr)) + goto fail_irq; + DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN; + + return 1; fail_irq: - scsi_unregister(a3000_host); + scsi_unregister(a3000_host); fail_register: - release_mem_region(0xDD0000, 256); - return 0; + release_mem_region(0xDD0000, 256); + return 0; } static int a3000_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ - + /* FIXME 2: kill this entire function, which should cause mid-layer to call wd33c93_host_reset anyway? */ @@ -236,10 +236,10 @@ static struct scsi_host_template driver_template = { static int a3000_release(struct Scsi_Host *instance) { - DMA(instance)->CNTR = 0; - release_mem_region(0xDD0000, 256); - free_irq(IRQ_AMIGA_PORTS, a3000_intr); - return 1; + DMA(instance)->CNTR = 0; + release_mem_region(0xDD0000, 256); + free_irq(IRQ_AMIGA_PORTS, a3000_intr); + return 1; } MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/a3000.h b/drivers/scsi/a3000.h index c7afe16..684813e 100644 --- a/drivers/scsi/a3000.h +++ b/drivers/scsi/a3000.h @@ -12,40 +12,40 @@ #include <linux/types.h> #ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 +#define CMD_PER_LUN 2 #endif #ifndef CAN_QUEUE -#define CAN_QUEUE 16 +#define CAN_QUEUE 16 #endif /* * if the transfer address ANDed with this results in a non-zero * result, then we can't use DMA. */ -#define A3000_XFER_MASK (0x00000003) +#define A3000_XFER_MASK (0x00000003) typedef struct { - unsigned char pad1[2]; - volatile unsigned short DAWR; - volatile unsigned int WTC; - unsigned char pad2[2]; - volatile unsigned short CNTR; - volatile unsigned long ACR; - unsigned char pad3[2]; - volatile unsigned short ST_DMA; - unsigned char pad4[2]; - volatile unsigned short FLUSH; - unsigned char pad5[2]; - volatile unsigned short CINT; - unsigned char pad6[2]; - volatile unsigned short ISTR; - unsigned char pad7[30]; - volatile unsigned short SP_DMA; - unsigned char pad8; - volatile unsigned char SASR; - unsigned char pad9; - volatile unsigned char SCMD; + unsigned char pad1[2]; + volatile unsigned short DAWR; + volatile unsigned int WTC; + unsigned char pad2[2]; + volatile unsigned short CNTR; + volatile unsigned long ACR; + unsigned char pad3[2]; + volatile unsigned short ST_DMA; + unsigned char pad4[2]; + volatile unsigned short FLUSH; + unsigned char pad5[2]; + volatile unsigned short CINT; + unsigned char pad6[2]; + volatile unsigned short ISTR; + unsigned char pad7[30]; + volatile unsigned short SP_DMA; + unsigned char pad8; + volatile unsigned char SASR; + unsigned char pad9; + volatile unsigned char SCMD; } a3000_scsiregs; #define DAWR_A3000 (3) |