m68k/atari - atari_scsi: change abort/reset return codes

[Resend of earlier patch - added equivalent changes to sun3 NCR5380 code]

The abort/reset lowlevel return codes had changed with the new
error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this.

Change reset handling for Atari to clear queues only, do not attempt
to call done() on each command aborted by the reset. The EH code
should do that for us. Queues _must_ be cleared, otherwise
atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking
further error recovery.

Update the Sun3 NCR5380 driver as well - the Sun3 driver was
derived from the Atari one. Kudos to Finn Thain for the Sun3 part
and cleaning up the header files. After the header cleanup, the
initio.h include (!) can be dropped from sun3_scsi.h now.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James E.J. Bottomley <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>

5 files changed, 42 insertions, 53 deletions

diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 0f3cdbc..e4aaf9a 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -2683,11 +2683,11 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 			local_irq_restore(flags);
 			cmd->scsi_done(cmd);
 			falcon_release_lock_if_possible(hostdata);
-			return SCSI_ABORT_SUCCESS;
+			return SUCCESS;
 		} else {
 /*			local_irq_restore(flags); */
 			printk("scsi%d: abort of connected command failed!\n", HOSTNO);
-			return SCSI_ABORT_ERROR;
+			return FAILED;
 		}
 	}
 #endif
@@ -2711,7 +2711,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 			 * yet... */
 			tmp->scsi_done(tmp);
 			falcon_release_lock_if_possible(hostdata);
-			return SCSI_ABORT_SUCCESS;
+			return SUCCESS;
 		}
 	}
 
@@ -2729,7 +2729,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 	if (hostdata->connected) {
 		local_irq_restore(flags);
 		ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
-		return SCSI_ABORT_SNOOZE;
+		return FAILED;
 	}
 
 	/*
@@ -2764,7 +2764,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 			ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
 
 			if (NCR5380_select(instance, cmd, (int)cmd->tag))
-				return SCSI_ABORT_BUSY;
+				return FAILED;
 
 			ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
 
@@ -2791,7 +2791,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 					local_irq_restore(flags);
 					tmp->scsi_done(tmp);
 					falcon_release_lock_if_possible(hostdata);
-					return SCSI_ABORT_SUCCESS;
+					return SUCCESS;
 				}
 			}
 		}
@@ -2816,7 +2816,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 	 */
 	falcon_release_lock_if_possible(hostdata);
 
-	return SCSI_ABORT_NOT_RUNNING;
+	return FAILED;
 }
 
 
@@ -2825,7 +2825,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
  *
  * Purpose : reset the SCSI bus.
  *
- * Returns : SCSI_RESET_WAKEUP
+ * Returns : SUCCESS or FAILURE
  *
  */
 
@@ -2834,7 +2834,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
 	SETUP_HOSTDATA(cmd->device->host);
 	int i;
 	unsigned long flags;
-#if 1
+#if defined(RESET_RUN_DONE)
 	Scsi_Cmnd *connected, *disconnected_queue;
 #endif
 
@@ -2859,7 +2859,14 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
 	 * through anymore ... */
 	(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
 
-#if 1	/* XXX Should now be done by midlevel code, but it's broken XXX */
+	/* MSch 20140115 - looking at the generic NCR5380 driver, all of this
+	 * should go.
+	 * Catch-22: if we don't clear all queues, the SCSI driver lock will
+	 * not be reset by atari_scsi_reset()!
+	 */
+
+#if defined(RESET_RUN_DONE)
+	/* XXX Should now be done by midlevel code, but it's broken XXX */
 	/* XXX see below                                            XXX */
 
 	/* MSch: old-style reset: actually abort all command processing here */
@@ -2915,7 +2922,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
 	 * the midlevel code that the reset was SUCCESSFUL, and there is no
 	 * need to 'wake up' the commands by a request_sense
 	 */
-	return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET;
+	return SUCCESS;
 #else /* 1 */
 
 	/* MSch: new-style reset handling: let the mid-level do what it can */
@@ -2963,6 +2970,6 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
 	local_irq_restore(flags);
 
 	/* we did no complete reset of all commands, so a wakeup is required */
-	return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET;
+	return SUCCESS;
 #endif /* 1 */
 }
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 296c936..4ae0c1a 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -827,7 +827,7 @@ static int atari_scsi_bus_reset(Scsi_Cmnd *cmd)
 	} else {
 		atari_turnon_irq(IRQ_MFP_FSCSI);
 	}
-	if ((rv & SCSI_RESET_ACTION) == SCSI_RESET_SUCCESS)
+	if (rv == SUCCESS)
 		falcon_release_lock_if_possible(hostdata);
 
 	return rv;
diff --git a/drivers/scsi/atari_scsi.h b/drivers/scsi/atari_scsi.h
index 11c624b..ae559f4 100644
--- a/drivers/scsi/atari_scsi.h
+++ b/drivers/scsi/atari_scsi.h
@@ -54,32 +54,6 @@
 #define	NCR5380_dma_xfer_len(i,cmd,phase) \
 	atari_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
 
-/* former generic SCSI error handling stuff */
-
-#define SCSI_ABORT_SNOOZE 0
-#define SCSI_ABORT_SUCCESS 1
-#define SCSI_ABORT_PENDING 2
-#define SCSI_ABORT_BUSY 3
-#define SCSI_ABORT_NOT_RUNNING 4
-#define SCSI_ABORT_ERROR 5
-
-#define SCSI_RESET_SNOOZE 0
-#define SCSI_RESET_PUNT 1
-#define SCSI_RESET_SUCCESS 2
-#define SCSI_RESET_PENDING 3
-#define SCSI_RESET_WAKEUP 4
-#define SCSI_RESET_NOT_RUNNING 5
-#define SCSI_RESET_ERROR 6
-
-#define SCSI_RESET_SYNCHRONOUS		0x01
-#define SCSI_RESET_ASYNCHRONOUS		0x02
-#define SCSI_RESET_SUGGEST_BUS_RESET	0x04
-#define SCSI_RESET_SUGGEST_HOST_RESET	0x08
-
-#define SCSI_RESET_BUS_RESET 0x100
-#define SCSI_RESET_HOST_RESET 0x200
-#define SCSI_RESET_ACTION   0xff
-
 /* Debugging printk definitions:
  *
  *  ARB  -> arbitration
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 636bbe0..72550bd 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -2664,11 +2664,11 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 #endif
 	  local_irq_restore(flags);
 	  cmd->scsi_done(cmd);
-	  return SCSI_ABORT_SUCCESS;
+	  return SUCCESS;
 	} else {
 /*	  local_irq_restore(flags); */
 	  printk("scsi%d: abort of connected command failed!\n", HOSTNO);
-	  return SCSI_ABORT_ERROR;
+	  return FAILED;
 	} 
    }
 #endif
@@ -2691,7 +2691,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 	    /* Tagged queuing note: no tag to free here, hasn't been assigned
 	     * yet... */
 	    tmp->scsi_done(tmp);
-	    return SCSI_ABORT_SUCCESS;
+	    return SUCCESS;
 	}
 
 /* 
@@ -2708,7 +2708,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
     if (hostdata->connected) {
 	local_irq_restore(flags);
 	ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
-        return SCSI_ABORT_SNOOZE;
+        return FAILED;
     }
 
 /*
@@ -2743,7 +2743,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 	    ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
   
             if (NCR5380_select (instance, cmd, (int) cmd->tag)) 
-		return SCSI_ABORT_BUSY;
+		return FAILED;
 
 	    ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
 
@@ -2769,7 +2769,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 #endif
 		    local_irq_restore(flags);
 		    tmp->scsi_done(tmp);
-		    return SCSI_ABORT_SUCCESS;
+		    return SUCCESS;
 		}
 	}
 
@@ -2786,7 +2786,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
     local_irq_restore(flags);
     printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); 
 
-    return SCSI_ABORT_NOT_RUNNING;
+    return FAILED;
 }
 
 
@@ -2795,7 +2795,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
  * 
  * Purpose : reset the SCSI bus.
  *
- * Returns : SCSI_RESET_WAKEUP
+ * Returns : SUCCESS or FAILURE
  *
  */ 
 
@@ -2804,7 +2804,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
     SETUP_HOSTDATA(cmd->device->host);
     int           i;
     unsigned long flags;
-#if 1
+#if defined(RESET_RUN_DONE)
     struct scsi_cmnd *connected, *disconnected_queue;
 #endif
 
@@ -2826,8 +2826,15 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
      * through anymore ... */
     (void)NCR5380_read( RESET_PARITY_INTERRUPT_REG );
 
-#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX */
-      /* XXX see below                                            XXX */
+	/* MSch 20140115 - looking at the generic NCR5380 driver, all of this
+	 * should go.
+	 * Catch-22: if we don't clear all queues, the SCSI driver lock will
+	 * not be released by atari_scsi_reset()!
+	 */
+
+#if defined(RESET_RUN_DONE)
+	/* XXX Should now be done by midlevel code, but it's broken XXX */
+	/* XXX see below                                            XXX */
 
     /* MSch: old-style reset: actually abort all command processing here */
 
@@ -2876,7 +2883,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
      * the midlevel code that the reset was SUCCESSFUL, and there is no 
      * need to 'wake up' the commands by a request_sense
      */
-    return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET;
+    return SUCCESS;
 #else /* 1 */
 
     /* MSch: new-style reset handling: let the mid-level do what it can */
@@ -2924,7 +2931,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
     local_irq_restore(flags);
 
     /* we did no complete reset of all commands, so a wakeup is required */
-    return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET;
+    return SUCCESS;
 #endif /* 1 */
 }
 
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index e2c009b..243c228 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -79,7 +79,6 @@
 #define REAL_DMA
 
 #include "scsi.h"
-#include "initio.h"
 #include <scsi/scsi_host.h>
 #include "sun3_scsi.h"
 
@@ -123,6 +122,8 @@ module_param(setup_hostid, int, 0);
 
 static struct scsi_cmnd *sun3_dma_setup_done = NULL;
 
+#define	RESET_RUN_DONE
+
 #define	AFTER_RESET_DELAY	(HZ/2)
 
 /* ms to wait after hitting dma regs */