staging: dgap: Merge digi.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 350 insertions, 378 deletions

diff --git a/drivers/staging/dgap/dgap_driver.h b/drivers/staging/dgap/dgap_driver.h
index dd7c717..ce6a9e8 100644
--- a/drivers/staging/dgap/dgap_driver.h
+++ b/drivers/staging/dgap/dgap_driver.h
@@ -31,8 +31,6 @@
 #include <linux/tty.h>          /* To pick up the various tty structs/defines */
 #include <linux/interrupt.h>    /* For irqreturn_t type */
 
-#include "digi.h"               /* Digi specific ioctl header */
-
 #ifndef TRUE
 # define TRUE 1
 #endif
@@ -860,6 +858,355 @@ struct un_t {
 
 
 /************************************************************************
+ ***	Definitions for Digi ditty(1) command.
+ ************************************************************************/
+
+
+/*
+ * Copyright (c) 1988-96 Digi International Inc., All Rights Reserved.
+ */
+
+/************************************************************************
+ * This module provides application access to special Digi
+ * serial line enhancements which are not standard UNIX(tm) features.
+ ************************************************************************/
+
+#if !defined(TIOCMODG)
+
+#define	TIOCMODG	('d'<<8) | 250		/* get modem ctrl state	*/
+#define	TIOCMODS	('d'<<8) | 251		/* set modem ctrl state	*/
+
+#ifndef TIOCM_LE
+#define		TIOCM_LE	0x01		/* line enable		*/
+#define		TIOCM_DTR	0x02		/* data terminal ready	*/
+#define		TIOCM_RTS	0x04		/* request to send	*/
+#define		TIOCM_ST	0x08		/* secondary transmit	*/
+#define		TIOCM_SR	0x10		/* secondary receive	*/
+#define		TIOCM_CTS	0x20		/* clear to send	*/
+#define		TIOCM_CAR	0x40		/* carrier detect	*/
+#define		TIOCM_RNG	0x80		/* ring	indicator	*/
+#define		TIOCM_DSR	0x100		/* data set ready	*/
+#define		TIOCM_RI	TIOCM_RNG	/* ring (alternate)	*/
+#define		TIOCM_CD	TIOCM_CAR	/* carrier detect (alt)	*/
+#endif
+
+#endif
+
+#if !defined(TIOCMSET)
+#define	TIOCMSET	('d'<<8) | 252		/* set modem ctrl state	*/
+#define	TIOCMGET	('d'<<8) | 253		/* set modem ctrl state	*/
+#endif
+
+#if !defined(TIOCMBIC)
+#define	TIOCMBIC	('d'<<8) | 254		/* set modem ctrl state */
+#define	TIOCMBIS	('d'<<8) | 255		/* set modem ctrl state */
+#endif
+
+
+#if !defined(TIOCSDTR)
+#define	TIOCSDTR	('e'<<8) | 0		/* set DTR		*/
+#define	TIOCCDTR	('e'<<8) | 1		/* clear DTR		*/
+#endif
+
+/************************************************************************
+ * Ioctl command arguments for DIGI parameters.
+ ************************************************************************/
+#define DIGI_GETA	('e'<<8) | 94		/* Read params		*/
+
+#define DIGI_SETA	('e'<<8) | 95		/* Set params		*/
+#define DIGI_SETAW	('e'<<8) | 96		/* Drain & set params	*/
+#define DIGI_SETAF	('e'<<8) | 97		/* Drain, flush & set params */
+
+#define DIGI_KME	('e'<<8) | 98		/* Read/Write Host	*/
+						/* Adapter Memory	*/
+
+#define	DIGI_GETFLOW	('e'<<8) | 99		/* Get startc/stopc flow */
+						/* control characters 	 */
+#define	DIGI_SETFLOW	('e'<<8) | 100		/* Set startc/stopc flow */
+						/* control characters	 */
+#define	DIGI_GETAFLOW	('e'<<8) | 101		/* Get Aux. startc/stopc */
+						/* flow control chars 	 */
+#define	DIGI_SETAFLOW	('e'<<8) | 102		/* Set Aux. startc/stopc */
+						/* flow control chars	 */
+
+#define DIGI_GEDELAY	('d'<<8) | 246		/* Get edelay */
+#define DIGI_SEDELAY	('d'<<8) | 247		/* Set edelay */
+
+struct	digiflow_t {
+	unsigned char	startc;				/* flow cntl start char	*/
+	unsigned char	stopc;				/* flow cntl stop char	*/
+};
+
+
+#ifdef	FLOW_2200
+#define	F2200_GETA	('e'<<8) | 104		/* Get 2x36 flow cntl flags */
+#define	F2200_SETAW	('e'<<8) | 105		/* Set 2x36 flow cntl flags */
+#define		F2200_MASK	0x03		/* 2200 flow cntl bit mask  */
+#define		FCNTL_2200	0x01		/* 2x36 terminal flow cntl  */
+#define		PCNTL_2200	0x02		/* 2x36 printer flow cntl   */
+#define	F2200_XON	0xf8
+#define	P2200_XON	0xf9
+#define	F2200_XOFF	0xfa
+#define	P2200_XOFF	0xfb
+
+#define	FXOFF_MASK	0x03			/* 2200 flow status mask    */
+#define	RCVD_FXOFF	0x01			/* 2x36 Terminal XOFF rcvd  */
+#define	RCVD_PXOFF	0x02			/* 2x36 Printer XOFF rcvd   */
+#endif
+
+/************************************************************************
+ * Values for digi_flags
+ ************************************************************************/
+#define DIGI_IXON	0x0001		/* Handle IXON in the FEP	*/
+#define DIGI_FAST	0x0002		/* Fast baud rates		*/
+#define RTSPACE		0x0004		/* RTS input flow control	*/
+#define CTSPACE		0x0008		/* CTS output flow control	*/
+#define DSRPACE		0x0010		/* DSR output flow control	*/
+#define DCDPACE		0x0020		/* DCD output flow control	*/
+#define DTRPACE		0x0040		/* DTR input flow control	*/
+#define DIGI_COOK	0x0080		/* Cooked processing done in FEP */
+#define DIGI_FORCEDCD	0x0100		/* Force carrier		*/
+#define	DIGI_ALTPIN	0x0200		/* Alternate RJ-45 pin config	*/
+#define	DIGI_AIXON	0x0400		/* Aux flow control in fep	*/
+#define	DIGI_PRINTER	0x0800		/* Hold port open for flow cntrl*/
+#define DIGI_PP_INPUT	0x1000		/* Change parallel port to input*/
+#define DIGI_DTR_TOGGLE 0x2000		/* Support DTR Toggle		*/
+#define	DIGI_422	0x4000		/* for 422/232 selectable panel */
+#define DIGI_RTS_TOGGLE	0x8000		/* Support RTS Toggle		*/
+
+/************************************************************************
+ * These options are not supported on the comxi.
+ ************************************************************************/
+#define	DIGI_COMXI	(DIGI_FAST|DIGI_COOK|DSRPACE|DCDPACE|DTRPACE)
+
+#define DIGI_PLEN	28		/* String length		*/
+#define	DIGI_TSIZ	10		/* Terminal string len		*/
+
+/************************************************************************
+ * Structure used with ioctl commands for DIGI parameters.
+ ************************************************************************/
+struct digi_t {
+	unsigned short	digi_flags;		/* Flags (see above)	*/
+	unsigned short	digi_maxcps;		/* Max printer CPS	*/
+	unsigned short	digi_maxchar;		/* Max chars in print queue */
+	unsigned short	digi_bufsize;		/* Buffer size		*/
+	unsigned char	digi_onlen;		/* Length of ON string	*/
+	unsigned char	digi_offlen;		/* Length of OFF string	*/
+	char		digi_onstr[DIGI_PLEN];	/* Printer on string	*/
+	char		digi_offstr[DIGI_PLEN];	/* Printer off string	*/
+	char		digi_term[DIGI_TSIZ];	/* terminal string	*/
+};
+
+/************************************************************************
+ * KME definitions and structures.
+ ************************************************************************/
+#define	RW_IDLE		0	/* Operation complete			*/
+#define	RW_READ		1	/* Read Concentrator Memory		*/
+#define	RW_WRITE	2	/* Write Concentrator Memory		*/
+
+struct rw_t {
+	unsigned char	rw_req;		/* Request type			*/
+	unsigned char	rw_board;	/* Host Adapter board number	*/
+	unsigned char	rw_conc;	/* Concentrator number		*/
+	unsigned char	rw_reserved;	/* Reserved for expansion	*/
+	unsigned long	rw_addr;	/* Address in concentrator	*/
+	unsigned short	rw_size;	/* Read/write request length	*/
+	unsigned char	rw_data[128];	/* Data to read/write		*/
+};
+
+/***********************************************************************
+ * Shrink Buffer and Board Information definitions and structures.
+
+ ************************************************************************/
+			/* Board type return codes */
+#define	PCXI_TYPE 1     /* Board type at the designated port is a PC/Xi */
+#define PCXM_TYPE 2     /* Board type at the designated port is a PC/Xm */
+#define	PCXE_TYPE 3     /* Board type at the designated port is a PC/Xe */
+#define	MCXI_TYPE 4     /* Board type at the designated port is a MC/Xi */
+#define COMXI_TYPE 5     /* Board type at the designated port is a COM/Xi */
+
+			 /* Non-Zero Result codes. */
+#define RESULT_NOBDFND 1 /* A Digi product at that port is not config installed */
+#define RESULT_NODESCT 2 /* A memory descriptor was not obtainable */
+#define RESULT_NOOSSIG 3 /* FEP/OS signature was not detected on the board */
+#define RESULT_TOOSML  4 /* Too small an area to shrink.  */
+#define RESULT_NOCHAN  5 /* Channel structure for the board was not found */
+
+struct shrink_buf_struct {
+	unsigned long	shrink_buf_vaddr;	/* Virtual address of board */
+	unsigned long	shrink_buf_phys;	/* Physical address of board */
+	unsigned long	shrink_buf_bseg;	/* Amount of board memory */
+	unsigned long	shrink_buf_hseg;	/* '186 Beginning of Dual-Port */
+
+	unsigned long	shrink_buf_lseg;	/* '186 Beginning of freed memory						*/
+	unsigned long	shrink_buf_mseg;	/* Linear address from start of
+						   dual-port were freed memory
+						   begins, host viewpoint. */
+
+	unsigned long	shrink_buf_bdparam;	/* Parameter for xxmemon and
+						   xxmemoff */
+
+	unsigned long	shrink_buf_reserva;	/* Reserved */
+	unsigned long	shrink_buf_reservb;	/* Reserved */
+	unsigned long	shrink_buf_reservc;	/* Reserved */
+	unsigned long	shrink_buf_reservd;	/* Reserved */
+
+	unsigned char	shrink_buf_result;	/* Reason for call failing
+						   Zero is Good return */
+	unsigned char	shrink_buf_init;	/* Non-Zero if it caused an
+						   xxinit call. */
+
+	unsigned char	shrink_buf_anports;	/* Number of async ports  */
+	unsigned char	shrink_buf_snports; 	/* Number of sync  ports */
+	unsigned char	shrink_buf_type;	/* Board type 1 = PC/Xi,
+							      2 = PC/Xm,
+							      3 = PC/Xe
+							      4 = MC/Xi
+							      5 = COMX/i */
+	unsigned char	shrink_buf_card;	/* Card number */
+
+};
+
+/************************************************************************
+ * Structure to get driver status information
+ ************************************************************************/
+struct digi_dinfo {
+	unsigned long	dinfo_nboards;		/* # boards configured	*/
+	char		dinfo_reserved[12];	/* for future expansion */
+	char		dinfo_version[16];	/* driver version       */
+};
+
+#define	DIGI_GETDD	('d'<<8) | 248		/* get driver info      */
+
+/************************************************************************
+ * Structure used with ioctl commands for per-board information
+ *
+ * physsize and memsize differ when board has "windowed" memory
+ ************************************************************************/
+struct digi_info {
+	unsigned long	info_bdnum;		/* Board number (0 based)  */
+	unsigned long	info_ioport;		/* io port address         */
+	unsigned long	info_physaddr;		/* memory address          */
+	unsigned long	info_physsize;		/* Size of host mem window */
+	unsigned long	info_memsize;		/* Amount of dual-port mem */
+						/* on board                */
+	unsigned short	info_bdtype;		/* Board type              */
+	unsigned short	info_nports;		/* number of ports         */
+	char		info_bdstate;		/* board state             */
+	char		info_reserved[7];	/* for future expansion    */
+};
+
+#define	DIGI_GETBD	('d'<<8) | 249		/* get board info          */
+
+struct digi_stat {
+	unsigned int	info_chan;		/* Channel number (0 based)  */
+	unsigned int	info_brd;		/* Board number (0 based)  */
+	unsigned long	info_cflag;		/* cflag for channel       */
+	unsigned long	info_iflag;		/* iflag for channel       */
+	unsigned long	info_oflag;		/* oflag for channel       */
+	unsigned long	info_mstat;		/* mstat for channel       */
+	unsigned long	info_tx_data;		/* tx_data for channel       */
+	unsigned long	info_rx_data;		/* rx_data for channel       */
+	unsigned long	info_hflow;		/* hflow for channel       */
+	unsigned long	info_reserved[8];	/* for future expansion    */
+};
+
+#define	DIGI_GETSTAT	('d'<<8) | 244		/* get board info          */
+/************************************************************************
+ *
+ * Structure used with ioctl commands for per-channel information
+ *
+ ************************************************************************/
+struct digi_ch {
+	unsigned long	info_bdnum;		/* Board number (0 based)  */
+	unsigned long	info_channel;		/* Channel index number    */
+	unsigned long	info_ch_cflag;		/* Channel cflag   	   */
+	unsigned long	info_ch_iflag;		/* Channel iflag   	   */
+	unsigned long	info_ch_oflag;		/* Channel oflag   	   */
+	unsigned long	info_chsize;		/* Channel structure size  */
+	unsigned long	info_sleep_stat;	/* sleep status		   */
+	dev_t		info_dev;		/* device number	   */
+	unsigned char	info_initstate;		/* Channel init state	   */
+	unsigned char	info_running;		/* Channel running state   */
+	long		reserved[8];		/* reserved for future use */
+};
+
+/*
+* This structure is used with the DIGI_FEPCMD ioctl to
+* tell the driver which port to send the command for.
+*/
+struct digi_cmd {
+	int	cmd;
+	int	word;
+	int	ncmds;
+	int	chan; /* channel index (zero based) */
+	int	bdid; /* board index (zero based) */
+};
+
+/*
+*  info_sleep_stat defines
+*/
+#define INFO_RUNWAIT	0x0001
+#define INFO_WOPEN	0x0002
+#define INFO_TTIOW	0x0004
+#define INFO_CH_RWAIT	0x0008
+#define INFO_CH_WEMPTY	0x0010
+#define INFO_CH_WLOW	0x0020
+#define INFO_XXBUF_BUSY 0x0040
+
+#define	DIGI_GETCH	('d'<<8) | 245		/* get board info          */
+
+/* Board type definitions */
+
+#define	SUBTYPE		0007
+#define	T_PCXI		0000
+#define T_PCXM		0001
+#define T_PCXE		0002
+#define T_PCXR		0003
+#define T_SP		0004
+#define T_SP_PLUS	0005
+#	define T_HERC	0000
+#	define T_HOU	0001
+#	define T_LON	0002
+#	define T_CHA	0003
+#define FAMILY		0070
+#define T_COMXI		0000
+#define T_PCXX		0010
+#define T_CX		0020
+#define T_EPC		0030
+#define	T_PCLITE	0040
+#define	T_SPXX		0050
+#define	T_AVXX		0060
+#define T_DXB		0070
+#define T_A2K_4_8	0070
+#define BUSTYPE		0700
+#define T_ISABUS	0000
+#define T_MCBUS		0100
+#define	T_EISABUS	0200
+#define	T_PCIBUS	0400
+
+/* Board State Definitions */
+
+#define	BD_RUNNING	0x0
+#define	BD_REASON	0x7f
+#define	BD_NOTFOUND	0x1
+#define	BD_NOIOPORT	0x2
+#define	BD_NOMEM	0x3
+#define	BD_NOBIOS	0x4
+#define	BD_NOFEP	0x5
+#define	BD_FAILED	0x6
+#define BD_ALLOCATED	0x7
+#define BD_TRIBOOT	0x8
+#define	BD_BADKME	0x80
+
+#define DIGI_LOOPBACK	      ('d'<<8) | 252		/* Enable/disable UART internal loopback */
+#define DIGI_SPOLL            ('d'<<8) | 254		/* change poller rate   */
+
+#define DIGI_SETCUSTOMBAUD	_IOW('e', 106, int)	/* Set integer baud rate */
+#define DIGI_GETCUSTOMBAUD	_IOR('e', 107, int)	/* Get integer baud rate */
+#define DIGI_RESET_PORT		('e'<<8) | 93		/* Reset port		*/
+
+/************************************************************************
  * Channel information structure.
  ************************************************************************/
 struct channel_t {
@@ -1202,4 +1549,4 @@ extern void	dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf, unsigned
 extern uint	dgap_get_custom_baud(struct channel_t *ch);
 extern void	dgap_firmware_reset_port(struct channel_t *ch);
 
-#endif
+#endif
\ No newline at end of file
diff --git a/drivers/staging/dgap/digi.h b/drivers/staging/dgap/digi.h
deleted file mode 100644
index 4f490a4..0000000
--- a/drivers/staging/dgap/digi.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Copyright 2003 Digi International (www.digi.com)
- *	Scott H Kilau <Scott_Kilau at digi dot com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- *	NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
- */
-
-#ifndef __DIGI_H
-#define __DIGI_H
-
-/************************************************************************
- ***	Definitions for Digi ditty(1) command.
- ************************************************************************/
-
-
-/*
- * Copyright (c) 1988-96 Digi International Inc., All Rights Reserved.
- */
-
-/************************************************************************
- * This module provides application access to special Digi
- * serial line enhancements which are not standard UNIX(tm) features.
- ************************************************************************/
-
-#if !defined(TIOCMODG)
-
-#define	TIOCMODG	('d'<<8) | 250		/* get modem ctrl state	*/
-#define	TIOCMODS	('d'<<8) | 251		/* set modem ctrl state	*/
-
-#ifndef TIOCM_LE
-#define		TIOCM_LE	0x01		/* line enable		*/
-#define		TIOCM_DTR	0x02		/* data terminal ready	*/
-#define		TIOCM_RTS	0x04		/* request to send	*/
-#define		TIOCM_ST	0x08		/* secondary transmit	*/
-#define		TIOCM_SR	0x10		/* secondary receive	*/
-#define		TIOCM_CTS	0x20		/* clear to send	*/
-#define		TIOCM_CAR	0x40		/* carrier detect	*/
-#define		TIOCM_RNG	0x80		/* ring	indicator	*/
-#define		TIOCM_DSR	0x100		/* data set ready	*/
-#define		TIOCM_RI	TIOCM_RNG	/* ring (alternate)	*/
-#define		TIOCM_CD	TIOCM_CAR	/* carrier detect (alt)	*/
-#endif
-
-#endif
-
-#if !defined(TIOCMSET)
-#define	TIOCMSET	('d'<<8) | 252		/* set modem ctrl state	*/
-#define	TIOCMGET	('d'<<8) | 253		/* set modem ctrl state	*/
-#endif
-
-#if !defined(TIOCMBIC)
-#define	TIOCMBIC	('d'<<8) | 254		/* set modem ctrl state */
-#define	TIOCMBIS	('d'<<8) | 255		/* set modem ctrl state */
-#endif
-
-
-#if !defined(TIOCSDTR)
-#define	TIOCSDTR	('e'<<8) | 0		/* set DTR		*/
-#define	TIOCCDTR	('e'<<8) | 1		/* clear DTR		*/
-#endif
-
-/************************************************************************
- * Ioctl command arguments for DIGI parameters.
- ************************************************************************/
-#define DIGI_GETA	('e'<<8) | 94		/* Read params		*/
-
-#define DIGI_SETA	('e'<<8) | 95		/* Set params		*/
-#define DIGI_SETAW	('e'<<8) | 96		/* Drain & set params	*/
-#define DIGI_SETAF	('e'<<8) | 97		/* Drain, flush & set params */
-
-#define DIGI_KME	('e'<<8) | 98		/* Read/Write Host	*/
-						/* Adapter Memory	*/
-
-#define	DIGI_GETFLOW	('e'<<8) | 99		/* Get startc/stopc flow */
-						/* control characters 	 */
-#define	DIGI_SETFLOW	('e'<<8) | 100		/* Set startc/stopc flow */
-						/* control characters	 */
-#define	DIGI_GETAFLOW	('e'<<8) | 101		/* Get Aux. startc/stopc */
-						/* flow control chars 	 */
-#define	DIGI_SETAFLOW	('e'<<8) | 102		/* Set Aux. startc/stopc */
-						/* flow control chars	 */
-
-#define DIGI_GEDELAY	('d'<<8) | 246		/* Get edelay */
-#define DIGI_SEDELAY	('d'<<8) | 247		/* Set edelay */
-
-struct	digiflow_t {
-	unsigned char	startc;				/* flow cntl start char	*/
-	unsigned char	stopc;				/* flow cntl stop char	*/
-};
-
-
-#ifdef	FLOW_2200
-#define	F2200_GETA	('e'<<8) | 104		/* Get 2x36 flow cntl flags */
-#define	F2200_SETAW	('e'<<8) | 105		/* Set 2x36 flow cntl flags */
-#define		F2200_MASK	0x03		/* 2200 flow cntl bit mask  */
-#define		FCNTL_2200	0x01		/* 2x36 terminal flow cntl  */
-#define		PCNTL_2200	0x02		/* 2x36 printer flow cntl   */
-#define	F2200_XON	0xf8
-#define	P2200_XON	0xf9
-#define	F2200_XOFF	0xfa
-#define	P2200_XOFF	0xfb
-
-#define	FXOFF_MASK	0x03			/* 2200 flow status mask    */
-#define	RCVD_FXOFF	0x01			/* 2x36 Terminal XOFF rcvd  */
-#define	RCVD_PXOFF	0x02			/* 2x36 Printer XOFF rcvd   */
-#endif
-
-/************************************************************************
- * Values for digi_flags
- ************************************************************************/
-#define DIGI_IXON	0x0001		/* Handle IXON in the FEP	*/
-#define DIGI_FAST	0x0002		/* Fast baud rates		*/
-#define RTSPACE		0x0004		/* RTS input flow control	*/
-#define CTSPACE		0x0008		/* CTS output flow control	*/
-#define DSRPACE		0x0010		/* DSR output flow control	*/
-#define DCDPACE		0x0020		/* DCD output flow control	*/
-#define DTRPACE		0x0040		/* DTR input flow control	*/
-#define DIGI_COOK	0x0080		/* Cooked processing done in FEP */
-#define DIGI_FORCEDCD	0x0100		/* Force carrier		*/
-#define	DIGI_ALTPIN	0x0200		/* Alternate RJ-45 pin config	*/
-#define	DIGI_AIXON	0x0400		/* Aux flow control in fep	*/
-#define	DIGI_PRINTER	0x0800		/* Hold port open for flow cntrl*/
-#define DIGI_PP_INPUT	0x1000		/* Change parallel port to input*/
-#define DIGI_DTR_TOGGLE 0x2000		/* Support DTR Toggle		*/
-#define	DIGI_422	0x4000		/* for 422/232 selectable panel */
-#define DIGI_RTS_TOGGLE	0x8000		/* Support RTS Toggle		*/
-
-/************************************************************************
- * These options are not supported on the comxi.
- ************************************************************************/
-#define	DIGI_COMXI	(DIGI_FAST|DIGI_COOK|DSRPACE|DCDPACE|DTRPACE)
-
-#define DIGI_PLEN	28		/* String length		*/
-#define	DIGI_TSIZ	10		/* Terminal string len		*/
-
-/************************************************************************
- * Structure used with ioctl commands for DIGI parameters.
- ************************************************************************/
-struct digi_t {
-	unsigned short	digi_flags;		/* Flags (see above)	*/
-	unsigned short	digi_maxcps;		/* Max printer CPS	*/
-	unsigned short	digi_maxchar;		/* Max chars in print queue */
-	unsigned short	digi_bufsize;		/* Buffer size		*/
-	unsigned char	digi_onlen;		/* Length of ON string	*/
-	unsigned char	digi_offlen;		/* Length of OFF string	*/
-	char		digi_onstr[DIGI_PLEN];	/* Printer on string	*/
-	char		digi_offstr[DIGI_PLEN];	/* Printer off string	*/
-	char		digi_term[DIGI_TSIZ];	/* terminal string	*/
-};
-
-/************************************************************************
- * KME definitions and structures.
- ************************************************************************/
-#define	RW_IDLE		0	/* Operation complete			*/
-#define	RW_READ		1	/* Read Concentrator Memory		*/
-#define	RW_WRITE	2	/* Write Concentrator Memory		*/
-
-struct rw_t {
-	unsigned char	rw_req;		/* Request type			*/
-	unsigned char	rw_board;	/* Host Adapter board number	*/
-	unsigned char	rw_conc;	/* Concentrator number		*/
-	unsigned char	rw_reserved;	/* Reserved for expansion	*/
-	unsigned long	rw_addr;	/* Address in concentrator	*/
-	unsigned short	rw_size;	/* Read/write request length	*/
-	unsigned char	rw_data[128];	/* Data to read/write		*/
-};
-
-/***********************************************************************
- * Shrink Buffer and Board Information definitions and structures.
-
- ************************************************************************/
-			/* Board type return codes */
-#define	PCXI_TYPE 1     /* Board type at the designated port is a PC/Xi */
-#define PCXM_TYPE 2     /* Board type at the designated port is a PC/Xm */
-#define	PCXE_TYPE 3     /* Board type at the designated port is a PC/Xe */
-#define	MCXI_TYPE 4     /* Board type at the designated port is a MC/Xi */
-#define COMXI_TYPE 5     /* Board type at the designated port is a COM/Xi */
-
-			 /* Non-Zero Result codes. */
-#define RESULT_NOBDFND 1 /* A Digi product at that port is not config installed */
-#define RESULT_NODESCT 2 /* A memory descriptor was not obtainable */
-#define RESULT_NOOSSIG 3 /* FEP/OS signature was not detected on the board */
-#define RESULT_TOOSML  4 /* Too small an area to shrink.  */
-#define RESULT_NOCHAN  5 /* Channel structure for the board was not found */
-
-struct shrink_buf_struct {
-	unsigned long	shrink_buf_vaddr;	/* Virtual address of board */
-	unsigned long	shrink_buf_phys;	/* Physical address of board */
-	unsigned long	shrink_buf_bseg;	/* Amount of board memory */
-	unsigned long	shrink_buf_hseg;	/* '186 Beginning of Dual-Port */
-
-	unsigned long	shrink_buf_lseg;	/* '186 Beginning of freed memory						*/
-	unsigned long	shrink_buf_mseg;	/* Linear address from start of
-						   dual-port were freed memory
-						   begins, host viewpoint. */
-
-	unsigned long	shrink_buf_bdparam;	/* Parameter for xxmemon and
-						   xxmemoff */
-
-	unsigned long	shrink_buf_reserva;	/* Reserved */
-	unsigned long	shrink_buf_reservb;	/* Reserved */
-	unsigned long	shrink_buf_reservc;	/* Reserved */
-	unsigned long	shrink_buf_reservd;	/* Reserved */
-
-	unsigned char	shrink_buf_result;	/* Reason for call failing
-						   Zero is Good return */
-	unsigned char	shrink_buf_init;	/* Non-Zero if it caused an
-						   xxinit call. */
-
-	unsigned char	shrink_buf_anports;	/* Number of async ports  */
-	unsigned char	shrink_buf_snports; 	/* Number of sync  ports */
-	unsigned char	shrink_buf_type;	/* Board type 1 = PC/Xi,
-							      2 = PC/Xm,
-							      3 = PC/Xe
-							      4 = MC/Xi
-							      5 = COMX/i */
-	unsigned char	shrink_buf_card;	/* Card number */
-
-};
-
-/************************************************************************
- * Structure to get driver status information
- ************************************************************************/
-struct digi_dinfo {
-	unsigned long	dinfo_nboards;		/* # boards configured	*/
-	char		dinfo_reserved[12];	/* for future expansion */
-	char		dinfo_version[16];	/* driver version       */
-};
-
-#define	DIGI_GETDD	('d'<<8) | 248		/* get driver info      */
-
-/************************************************************************
- * Structure used with ioctl commands for per-board information
- *
- * physsize and memsize differ when board has "windowed" memory
- ************************************************************************/
-struct digi_info {
-	unsigned long	info_bdnum;		/* Board number (0 based)  */
-	unsigned long	info_ioport;		/* io port address         */
-	unsigned long	info_physaddr;		/* memory address          */
-	unsigned long	info_physsize;		/* Size of host mem window */
-	unsigned long	info_memsize;		/* Amount of dual-port mem */
-						/* on board                */
-	unsigned short	info_bdtype;		/* Board type              */
-	unsigned short	info_nports;		/* number of ports         */
-	char		info_bdstate;		/* board state             */
-	char		info_reserved[7];	/* for future expansion    */
-};
-
-#define	DIGI_GETBD	('d'<<8) | 249		/* get board info          */
-
-struct digi_stat {
-	unsigned int	info_chan;		/* Channel number (0 based)  */
-	unsigned int	info_brd;		/* Board number (0 based)  */
-	unsigned long	info_cflag;		/* cflag for channel       */
-	unsigned long	info_iflag;		/* iflag for channel       */
-	unsigned long	info_oflag;		/* oflag for channel       */
-	unsigned long	info_mstat;		/* mstat for channel       */
-	unsigned long	info_tx_data;		/* tx_data for channel       */
-	unsigned long	info_rx_data;		/* rx_data for channel       */
-	unsigned long	info_hflow;		/* hflow for channel       */
-	unsigned long	info_reserved[8];	/* for future expansion    */
-};
-
-#define	DIGI_GETSTAT	('d'<<8) | 244		/* get board info          */
-/************************************************************************
- *
- * Structure used with ioctl commands for per-channel information
- *
- ************************************************************************/
-struct digi_ch {
-	unsigned long	info_bdnum;		/* Board number (0 based)  */
-	unsigned long	info_channel;		/* Channel index number    */
-	unsigned long	info_ch_cflag;		/* Channel cflag   	   */
-	unsigned long	info_ch_iflag;		/* Channel iflag   	   */
-	unsigned long	info_ch_oflag;		/* Channel oflag   	   */
-	unsigned long	info_chsize;		/* Channel structure size  */
-	unsigned long	info_sleep_stat;	/* sleep status		   */
-	dev_t		info_dev;		/* device number	   */
-	unsigned char	info_initstate;		/* Channel init state	   */
-	unsigned char	info_running;		/* Channel running state   */
-	long		reserved[8];		/* reserved for future use */
-};
-
-/*
-* This structure is used with the DIGI_FEPCMD ioctl to
-* tell the driver which port to send the command for.
-*/
-struct digi_cmd {
-	int	cmd;
-	int	word;
-	int	ncmds;
-	int	chan; /* channel index (zero based) */
-	int	bdid; /* board index (zero based) */
-};
-
-/*
-*  info_sleep_stat defines
-*/
-#define INFO_RUNWAIT	0x0001
-#define INFO_WOPEN	0x0002
-#define INFO_TTIOW	0x0004
-#define INFO_CH_RWAIT	0x0008
-#define INFO_CH_WEMPTY	0x0010
-#define INFO_CH_WLOW	0x0020
-#define INFO_XXBUF_BUSY 0x0040
-
-#define	DIGI_GETCH	('d'<<8) | 245		/* get board info          */
-
-/* Board type definitions */
-
-#define	SUBTYPE		0007
-#define	T_PCXI		0000
-#define T_PCXM		0001
-#define T_PCXE		0002
-#define T_PCXR		0003
-#define T_SP		0004
-#define T_SP_PLUS	0005
-#	define T_HERC	0000
-#	define T_HOU	0001
-#	define T_LON	0002
-#	define T_CHA	0003
-#define FAMILY		0070
-#define T_COMXI		0000
-#define T_PCXX		0010
-#define T_CX		0020
-#define T_EPC		0030
-#define	T_PCLITE	0040
-#define	T_SPXX		0050
-#define	T_AVXX		0060
-#define T_DXB		0070
-#define T_A2K_4_8	0070
-#define BUSTYPE		0700
-#define T_ISABUS	0000
-#define T_MCBUS		0100
-#define	T_EISABUS	0200
-#define	T_PCIBUS	0400
-
-/* Board State Definitions */
-
-#define	BD_RUNNING	0x0
-#define	BD_REASON	0x7f
-#define	BD_NOTFOUND	0x1
-#define	BD_NOIOPORT	0x2
-#define	BD_NOMEM	0x3
-#define	BD_NOBIOS	0x4
-#define	BD_NOFEP	0x5
-#define	BD_FAILED	0x6
-#define BD_ALLOCATED	0x7
-#define BD_TRIBOOT	0x8
-#define	BD_BADKME	0x80
-
-#define DIGI_LOOPBACK	      ('d'<<8) | 252		/* Enable/disable UART internal loopback */
-#define DIGI_SPOLL            ('d'<<8) | 254		/* change poller rate   */
-
-#define DIGI_SETCUSTOMBAUD	_IOW('e', 106, int)	/* Set integer baud rate */
-#define DIGI_GETCUSTOMBAUD	_IOR('e', 107, int)	/* Get integer baud rate */
-#define DIGI_RESET_PORT		('e'<<8) | 93		/* Reset port		*/
-
-#endif /* DIGI_H */