Merge branch 'orion/cleanup' into orion/dt

Merge in the cleanups that should have been used as the base of the DT
branch instead of letting the conflicts be exposed all the way up to
the toplevel merges.

All of these are caused by cleanups being done both in the cleanup branch
and the dt branch, resulting in remove/remove conflicts of header files.

By Andrew Lunn (3) and others
via Jason Cooper
* orion/cleanup:
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes

Remove/remove conflicts in:
	arch/arm/mach-kirkwood/board-dockstar.c
	arch/arm/mach-kirkwood/board-goflexnet.c
	arch/arm/mach-kirkwood/board-lsxl.c

Signed-off-by: Olof Johansson <olof@lixom.net>

23 files changed, 39 insertions, 120 deletions

diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
index 726cfc4..d7196db 100644
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -16,20 +16,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data dockstar_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 3e2d95d..08248e2 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -13,23 +13,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/gpio.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 70eb01d..375f7d88 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -26,7 +26,7 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
 	{ }
 };
 
-struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
 	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
 		       NULL),
@@ -119,7 +119,7 @@ static void __init kirkwood_dt_init(void)
 			     kirkwood_auxdata_lookup, NULL);
 }
 
-static const char *kirkwood_dt_board_compat[] = {
+static const char * const kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
 	"dlink,dns-320",
 	"dlink,dns-325",
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 3b96618..9db979a 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -18,20 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index b6e5db9..9f6f496 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -13,14 +13,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 7d3c54c..c8ebde4 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -10,16 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data iconnect_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index 22b8649..f655b26 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -10,10 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index d60cdab..4ec8b7a 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -14,10 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/mv643xx_eth.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index 329ff68..acb0187 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -19,9 +19,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 906c22e..5303be6 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -18,10 +18,10 @@
 #include <linux/clk-provider.h>
 #include <linux/spinlock.h>
 #include <linux/mv643xx_i2c.h>
+#include <linux/timex.h>
+#include <linux/kexec.h>
 #include <net/dsa.h>
 #include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/kexec.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
@@ -426,7 +426,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 /*****************************************************************************
  * SPI
  ****************************************************************************/
-void __init kirkwood_spi_init()
+void __init kirkwood_spi_init(void)
 {
 	orion_spi_init(SPI_PHYS_BASE);
 }
@@ -647,8 +647,7 @@ void __init kirkwood_l2_init(void)
 
 void __init kirkwood_init(void)
 {
-	printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
-		kirkwood_id(), kirkwood_tclk);
+	pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
 
 	/*
 	 * Disable propagation of mbus errors to the CPU local bus,
@@ -672,7 +671,7 @@ void __init kirkwood_init(void)
 	kirkwood_xor1_init();
 	kirkwood_crypto_init();
 
-#ifdef CONFIG_KEXEC 
+#ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
 #endif
 }
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 3e079d1..5ffa57f 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -47,7 +47,8 @@ void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+			    int (*dev_ready)(struct mtd_info *));
 void kirkwood_audio_init(void);
 void kirkwood_restart(char, const char *);
 void kirkwood_clk_init(void);
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
index 0f17109..f730467 100644
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void)
 
 	cpuidle_register_driver(&kirkwood_idle_driver);
 	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+		pr_err("kirkwood_init_cpuidle: Failed registering\n");
 		return -EIO;
 	}
 	return 0;
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 23dcb19..791a98f 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -93,7 +93,7 @@ static void __init dockstar_init(void)
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&dockstar_ge00_data);
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 8847035..2a97a2e 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -14,6 +14,7 @@
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
+#include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
 	IRQ_KIRKWOOD_GPIO_LOW_0_7,
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
index 285edab..4894959 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -19,6 +19,7 @@
 #include <mach/irqs.h>
 #include <plat/time.h>
 #include "common.h"
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 0c6ad63..827cde4 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void)
 	if (dev == MV88F6180_DEV_ID)
 		return MPP_F6180_MASK;
 
-	printk(KERN_ERR "MPP setup: unknown kirkwood variant "
-			"(dev %#x rev %#x)\n", dev, rev);
+	pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
+	       dev, rev);
 	return 0;
 }
 
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 88b0788b..728e86d 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.dev		= {
-		.platform_data 	= &netspace_v2_button_data,
+		.platform_data	= &netspace_v2_button_data,
 	},
 };
 
@@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
 	MPP29_GPIO,		/* Blue led (slow register) */
 	MPP30_GPIO,		/* Blue led (command register) */
 	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
+	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
 	MPP33_GPO,		/* Fan speed (bit 2) */
 	0
 };
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 134ef50..7e81e9b 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void)
 	kirkwood_mpp_conf(openrd_uart1_mpp_config);
 
 	if (gpio_request(34, "SD_UART1_SEL")) {
-		printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
-				", gpio: 34\n");
+		pr_err("GPIO request 34 failed for SD/UART1 selection\n");
 		return -EIO;
 	}
 
 	if (gpio_request(28, "RS232_RS485_SEL")) {
-		printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
-				", gpio# 28\n");
+		pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
 		gpio_free(34);
 		return -EIO;
 	}
@@ -185,15 +183,13 @@ static void __init openrd_init(void)
 
 	if (uart1 <= 0) {
 		if (uart1 < 0)
-			printk(KERN_ERR "Invalid kernel parameter to select "
-				"UART1. Defaulting to SD. ERROR CODE: %d\n",
-				uart1);
+			pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
+			       uart1);
 
 		/* Select SD
 		 * Pin # 34: 0 => UART1, 1 => SD */
 		if (gpio_request(34, "SD_UART1_SEL")) {
-			printk(KERN_ERR "GPIO request failed for SD/UART1 "
-					"selection, gpio: 34\n");
+			pr_err("GPIO request 34 failed for SD/UART1 selection\n");
 		} else {
 
 			gpio_direction_output(34, 1);
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ec54491..1e9f90e 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port)
 
 	clk = clk_get_sys("pcie", port);
 	if (IS_ERR(clk)) {
-		printk(KERN_ERR "PCIE clock %s missing\n", port);
+		pr_err("PCIE clock %s missing\n", port);
 		return;
 	}
 	clk_prepare_enable(clk);
@@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 		return 0;
 
 	index = pcie_port_map[nr];
-	printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+	pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
 
 	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
 	if (!pp)
@@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	case 1:
 		kirkwood_enable_pcie_clk("1");
 		pcie1_ioresources_init(pp);
-		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
+		pci_ioremap_io(SZ_64K * sys->busnr,
+			       KIRKWOOD_PCIE1_IO_PHYS_BASE);
 		break;
 	default:
 		panic("PCIe setup: invalid controller %d", index);
@@ -224,22 +225,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
-static struct pci_bus __init *
-kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_bus *bus;
-
-	if (nr < num_pcie_ports) {
-		bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-					&sys->resources);
-	} else {
-		bus = NULL;
-		BUG();
-	}
-
-	return bus;
-}
-
 static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
@@ -251,19 +236,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 
 static struct hw_pci kirkwood_pci __initdata = {
 	.setup		= kirkwood_pcie_setup,
-	.scan		= kirkwood_pcie_scan_bus,
 	.map_irq	= kirkwood_pcie_map_irq,
+	.ops            = &pcie_ops,
 };
 
 static void __init add_pcie_port(int index, void __iomem *base)
 {
-	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+	pr_info("Kirkwood PCIe port %d: ", index);
 
 	if (orion_pcie_link_up(base)) {
-		printk(KERN_INFO "link up\n");
+		pr_info("link up\n");
 		pcie_port_map[num_pcie_ports++] = index;
 	} else
-		printk(KERN_INFO "link down, ignoring\n");
+		pr_info("link down, ignoring\n");
 }
 
 void __init kirkwood_pcie_init(unsigned int portmask)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 28d0aba..8a17594 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -117,7 +117,7 @@ static void __init sheevaplug_init(void)
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index bad738e..f2daf71 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -29,7 +29,7 @@
 #include "common.h"
 #include "mpp.h"
 
-struct mtd_partition hp_t5325_partitions[] = {
+static struct mtd_partition hp_t5325_partitions[] = {
 	{
 		.name		= "u-boot env",
 		.size		= SZ_64K,
@@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = {
 	},
 };
 
-const struct flash_platform_data hp_t5325_flash = {
+static const struct flash_platform_data hp_t5325_flash = {
 	.type		= "mx25l8005",
 	.name		= "spi_flash",
 	.parts		= hp_t5325_partitions,
 	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
 };
 
-struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &hp_t5325_flash,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 367a940..e4c6127 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void)
 		else
 			kirkwood_pcie_init(KW_PCIE0);
 	}
-
-   return 0;
+	return 0;
 }
 subsys_initcall(ts41x_pci_init);
 
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 8943ede..cec87ce 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -7,6 +7,7 @@
 #include <linux/serial_reg.h>
 #include <mach/kirkwood.h>
 #include "common.h"
+#include "tsx1x-common.h"
 
 /*
  * QNAP TS-x1x Boards flash
@@ -29,7 +30,7 @@
  *
  ***************************************************************************/
 
-struct mtd_partition qnap_tsx1x_partitions[] = {
+static struct mtd_partition qnap_tsx1x_partitions[] = {
 	{
 		.name		= "U-Boot",
 		.size		= 0x00080000,
@@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = {
 	},
 };
 
-const struct flash_platform_data qnap_tsx1x_flash = {
+static const struct flash_platform_data qnap_tsx1x_flash = {
 	.type		= "m25p128",
 	.name		= "spi_flash",
 	.parts		= qnap_tsx1x_partitions,
 	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
 };
 
-struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &qnap_tsx1x_flash,