diff options
author | Hans Verkuil <hans.verkuil@cisco.com> | 2015-03-21 12:39:09 (GMT) |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@osg.samsung.com> | 2015-05-01 11:52:34 (GMT) |
commit | 6e80c4738aa12701a5714cb3e4a685f95c1ffe5f (patch) | |
tree | 51afb520ab85c708d1b2dbfb2093d76dffea5e43 | |
parent | 717fd5b4907ada90ceb069d484068aaa01c58bb0 (diff) | |
download | linux-6e80c4738aa12701a5714cb3e4a685f95c1ffe5f.tar.xz |
[media] v4l2: replace s_mbus_fmt by set_fmt
The s_mbus_fmt video op is a duplicate of the pad op. Replace all uses
in sub-devices by the set_fmt() pad op.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-rw-r--r-- | drivers/media/i2c/adv7170.c | 16 | ||||
-rw-r--r-- | drivers/media/i2c/adv7175.c | 16 | ||||
-rw-r--r-- | drivers/media/i2c/cx25840/cx25840-core.c | 15 | ||||
-rw-r--r-- | drivers/media/i2c/saa7115.c | 16 | ||||
-rw-r--r-- | drivers/media/i2c/saa717x.c | 16 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-av-core.c | 16 | ||||
-rw-r--r-- | drivers/media/usb/go7007/s2250-board.c | 18 |
7 files changed, 88 insertions, 25 deletions
diff --git a/drivers/media/i2c/adv7170.c b/drivers/media/i2c/adv7170.c index 58d0a3c..f0d3f5a 100644 --- a/drivers/media/i2c/adv7170.c +++ b/drivers/media/i2c/adv7170.c @@ -296,11 +296,16 @@ static int adv7170_get_fmt(struct v4l2_subdev *sd, return 0; } -static int adv7170_s_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int adv7170_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; u8 val = adv7170_read(sd, 0x7); - int ret; + int ret = 0; + + if (format->pad) + return -EINVAL; switch (mf->code) { case MEDIA_BUS_FMT_UYVY8_2X8: @@ -317,7 +322,8 @@ static int adv7170_s_fmt(struct v4l2_subdev *sd, return -EINVAL; } - ret = adv7170_write(sd, 0x7, val); + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ret = adv7170_write(sd, 0x7, val); return ret; } @@ -327,12 +333,12 @@ static int adv7170_s_fmt(struct v4l2_subdev *sd, static const struct v4l2_subdev_video_ops adv7170_video_ops = { .s_std_output = adv7170_s_std_output, .s_routing = adv7170_s_routing, - .s_mbus_fmt = adv7170_s_fmt, }; static const struct v4l2_subdev_pad_ops adv7170_pad_ops = { .enum_mbus_code = adv7170_enum_mbus_code, .get_fmt = adv7170_get_fmt, + .set_fmt = adv7170_set_fmt, }; static const struct v4l2_subdev_ops adv7170_ops = { diff --git a/drivers/media/i2c/adv7175.c b/drivers/media/i2c/adv7175.c index f744345..321834b 100644 --- a/drivers/media/i2c/adv7175.c +++ b/drivers/media/i2c/adv7175.c @@ -334,11 +334,16 @@ static int adv7175_get_fmt(struct v4l2_subdev *sd, return 0; } -static int adv7175_s_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int adv7175_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; u8 val = adv7175_read(sd, 0x7); - int ret; + int ret = 0; + + if (format->pad) + return -EINVAL; switch (mf->code) { case MEDIA_BUS_FMT_UYVY8_2X8: @@ -355,7 +360,8 @@ static int adv7175_s_fmt(struct v4l2_subdev *sd, return -EINVAL; } - ret = adv7175_write(sd, 0x7, val); + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ret = adv7175_write(sd, 0x7, val); return ret; } @@ -380,12 +386,12 @@ static const struct v4l2_subdev_core_ops adv7175_core_ops = { static const struct v4l2_subdev_video_ops adv7175_video_ops = { .s_std_output = adv7175_s_std_output, .s_routing = adv7175_s_routing, - .s_mbus_fmt = adv7175_s_fmt, }; static const struct v4l2_subdev_pad_ops adv7175_pad_ops = { .enum_mbus_code = adv7175_enum_mbus_code, .get_fmt = adv7175_get_fmt, + .set_fmt = adv7175_set_fmt, }; static const struct v4l2_subdev_ops adv7175_ops = { diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index 18e3615..e15a789 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -1366,14 +1366,17 @@ static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl) /* ----------------------------------------------------------------------- */ -static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +static int cx25840_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *fmt = &format->format; struct cx25840_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); int HSC, VSC, Vsrc, Hsrc, filter, Vlines; int is_50Hz = !(state->std & V4L2_STD_525_60); - if (fmt->code != MEDIA_BUS_FMT_FIXED) + if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED) return -EINVAL; fmt->field = V4L2_FIELD_INTERLACED; @@ -1403,6 +1406,8 @@ static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt fmt->width, fmt->height); return -ERANGE; } + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20); VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); @@ -5068,7 +5073,6 @@ static const struct v4l2_subdev_video_ops cx25840_video_ops = { .s_std = cx25840_s_std, .g_std = cx25840_g_std, .s_routing = cx25840_s_video_routing, - .s_mbus_fmt = cx25840_s_mbus_fmt, .s_stream = cx25840_s_stream, .g_input_status = cx25840_g_input_status, }; @@ -5080,12 +5084,17 @@ static const struct v4l2_subdev_vbi_ops cx25840_vbi_ops = { .g_sliced_fmt = cx25840_g_sliced_fmt, }; +static const struct v4l2_subdev_pad_ops cx25840_pad_ops = { + .set_fmt = cx25840_set_fmt, +}; + static const struct v4l2_subdev_ops cx25840_ops = { .core = &cx25840_core_ops, .tuner = &cx25840_tuner_ops, .audio = &cx25840_audio_ops, .video = &cx25840_video_ops, .vbi = &cx25840_vbi_ops, + .pad = &cx25840_pad_ops, .ir = &cx25840_ir_ops, }; diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c index 7147c8b..0eae5f4 100644 --- a/drivers/media/i2c/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -1170,12 +1170,18 @@ static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f return 0; } -static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +static int saa711x_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { - if (fmt->code != MEDIA_BUS_FMT_FIXED) + struct v4l2_mbus_framefmt *fmt = &format->format; + + if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED) return -EINVAL; fmt->field = V4L2_FIELD_INTERLACED; fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; return saa711x_set_size(sd, fmt->width, fmt->height); } @@ -1603,7 +1609,6 @@ static const struct v4l2_subdev_video_ops saa711x_video_ops = { .s_std = saa711x_s_std, .s_routing = saa711x_s_routing, .s_crystal_freq = saa711x_s_crystal_freq, - .s_mbus_fmt = saa711x_s_mbus_fmt, .s_stream = saa711x_s_stream, .querystd = saa711x_querystd, .g_input_status = saa711x_g_input_status, @@ -1617,12 +1622,17 @@ static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = { .s_raw_fmt = saa711x_s_raw_fmt, }; +static const struct v4l2_subdev_pad_ops saa711x_pad_ops = { + .set_fmt = saa711x_set_fmt, +}; + static const struct v4l2_subdev_ops saa711x_ops = { .core = &saa711x_core_ops, .tuner = &saa711x_tuner_ops, .audio = &saa711x_audio_ops, .video = &saa711x_video_ops, .vbi = &saa711x_vbi_ops, + .pad = &saa711x_pad_ops, }; #define CHIP_VER_SIZE 16 diff --git a/drivers/media/i2c/saa717x.c b/drivers/media/i2c/saa717x.c index 17557b2..7d51736 100644 --- a/drivers/media/i2c/saa717x.c +++ b/drivers/media/i2c/saa717x.c @@ -992,13 +992,16 @@ static int saa717x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regi } #endif -static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +static int saa717x_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *fmt = &format->format; int prescale, h_scale, v_scale; v4l2_dbg(1, debug, sd, "decoder set size\n"); - if (fmt->code != MEDIA_BUS_FMT_FIXED) + if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED) return -EINVAL; /* FIXME need better bounds checking here */ @@ -1010,6 +1013,9 @@ static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt fmt->field = V4L2_FIELD_INTERLACED; fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; + /* scaling setting */ /* NTSC and interlace only */ prescale = SAA717X_NTSC_WIDTH / fmt->width; @@ -1217,7 +1223,6 @@ static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = { static const struct v4l2_subdev_video_ops saa717x_video_ops = { .s_std = saa717x_s_std, .s_routing = saa717x_s_video_routing, - .s_mbus_fmt = saa717x_s_mbus_fmt, .s_stream = saa717x_s_stream, }; @@ -1225,11 +1230,16 @@ static const struct v4l2_subdev_audio_ops saa717x_audio_ops = { .s_routing = saa717x_s_audio_routing, }; +static const struct v4l2_subdev_pad_ops saa717x_pad_ops = { + .set_fmt = saa717x_set_fmt, +}; + static const struct v4l2_subdev_ops saa717x_ops = { .core = &saa717x_core_ops, .tuner = &saa717x_tuner_ops, .audio = &saa717x_audio_ops, .video = &saa717x_video_ops, + .pad = &saa717x_pad_ops, }; /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c index 5a55630..30bbe8d 100644 --- a/drivers/media/pci/cx18/cx18-av-core.c +++ b/drivers/media/pci/cx18/cx18-av-core.c @@ -945,14 +945,17 @@ static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl) return 0; } -static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +static int cx18_av_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *fmt = &format->format; struct cx18_av_state *state = to_cx18_av_state(sd); struct cx18 *cx = v4l2_get_subdevdata(sd); int HSC, VSC, Vsrc, Hsrc, filter, Vlines; int is_50Hz = !(state->std & V4L2_STD_525_60); - if (fmt->code != MEDIA_BUS_FMT_FIXED) + if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED) return -EINVAL; fmt->field = V4L2_FIELD_INTERLACED; @@ -987,6 +990,9 @@ static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt return -ERANGE; } + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; + HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20); VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); VSC &= 0x1fff; @@ -1285,7 +1291,6 @@ static const struct v4l2_subdev_video_ops cx18_av_video_ops = { .s_std = cx18_av_s_std, .s_routing = cx18_av_s_video_routing, .s_stream = cx18_av_s_stream, - .s_mbus_fmt = cx18_av_s_mbus_fmt, }; static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = { @@ -1295,12 +1300,17 @@ static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = { .s_raw_fmt = cx18_av_s_raw_fmt, }; +static const struct v4l2_subdev_pad_ops cx18_av_pad_ops = { + .set_fmt = cx18_av_set_fmt, +}; + static const struct v4l2_subdev_ops cx18_av_ops = { .core = &cx18_av_general_ops, .tuner = &cx18_av_tuner_ops, .audio = &cx18_av_audio_ops, .video = &cx18_av_video_ops, .vbi = &cx18_av_vbi_ops, + .pad = &cx18_av_pad_ops, }; int cx18_av_probe(struct cx18 *cx) diff --git a/drivers/media/usb/go7007/s2250-board.c b/drivers/media/usb/go7007/s2250-board.c index bb84668..5c2a495 100644 --- a/drivers/media/usb/go7007/s2250-board.c +++ b/drivers/media/usb/go7007/s2250-board.c @@ -405,12 +405,20 @@ static int s2250_s_ctrl(struct v4l2_ctrl *ctrl) return 0; } -static int s2250_s_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt) +static int s2250_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *fmt = &format->format; struct s2250 *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); + if (format->pad) + return -EINVAL; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; + if (fmt->height < 640) { write_reg_fp(client, 0x12b, state->reg12b_val | 0x400); write_reg_fp(client, 0x140, 0x060); @@ -479,13 +487,17 @@ static const struct v4l2_subdev_audio_ops s2250_audio_ops = { static const struct v4l2_subdev_video_ops s2250_video_ops = { .s_std = s2250_s_std, .s_routing = s2250_s_video_routing, - .s_mbus_fmt = s2250_s_mbus_fmt, +}; + +static const struct v4l2_subdev_pad_ops s2250_pad_ops = { + .set_fmt = s2250_set_fmt, }; static const struct v4l2_subdev_ops s2250_ops = { .core = &s2250_core_ops, .audio = &s2250_audio_ops, .video = &s2250_video_ops, + .pad = &s2250_pad_ops, }; /* --------------------------------------------------------------------------*/ |