summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHenry Ptasinski <henryp@broadcom.com>2011-06-29 23:46:51 (GMT)
committerGreg Kroah-Hartman <gregkh@suse.de>2011-07-05 16:57:13 (GMT)
commit8a76f1eee1cb8933fb22d1211fdb4358513c3239 (patch)
tree6aa7557c74ede84935b61938330cb029c1250c18
parentafe6867f969009c5a4cad520179801c782ca63aa (diff)
downloadlinux-8a76f1eee1cb8933fb22d1211fdb4358513c3239.tar.xz
staging: brcm80211: run scripts/cleanfile to remove whitespace errors
Used scripts/cleanfile to remove assorted whitespace errors. Signed-off-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.h2
-rw-r--r--drivers/staging/brcm80211/brcmfmac/dhd.h12
-rw-r--r--drivers/staging/brcm80211/brcmfmac/sdio_host.h2
-rw-r--r--drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c4
-rw-r--r--drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h6
-rw-r--r--drivers/staging/brcm80211/brcmfmac/wl_iw.h4
-rw-r--r--drivers/staging/brcm80211/brcmsmac/d11.h30
-rw-r--r--drivers/staging/brcm80211/brcmsmac/main.c6
-rw-r--r--drivers/staging/brcm80211/brcmsmac/nicpci.c10
-rw-r--r--drivers/staging/brcm80211/brcmsmac/otp.c4
-rw-r--r--drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h6
-rw-r--r--drivers/staging/brcm80211/brcmsmac/phy/phy_int.h4
-rw-r--r--drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c18
-rw-r--r--drivers/staging/brcm80211/brcmsmac/phy/phyreg_n.h14
-rw-r--r--drivers/staging/brcm80211/brcmsmac/rate.h6
-rw-r--r--drivers/staging/brcm80211/brcmsmac/scb.h2
-rw-r--r--drivers/staging/brcm80211/brcmsmac/types.h2
-rw-r--r--drivers/staging/brcm80211/brcmutil/utils.c2
-rw-r--r--drivers/staging/brcm80211/brcmutil/wifi.c1
-rw-r--r--drivers/staging/brcm80211/include/brcmu_utils.h2
-rw-r--r--drivers/staging/brcm80211/include/soc.h2
21 files changed, 69 insertions, 70 deletions
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.h b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.h
index 42c71a8..ff5e09d 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.h
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.h
@@ -72,7 +72,7 @@ extern void sdioh_sdmmc_osfree(sdioh_info_t *sd);
/* private bus modes */
#define SDIOH_MODE_SD4 2
-#define CLIENT_INTR 0x100 /* Get rid of this! */
+#define CLIENT_INTR 0x100 /* Get rid of this! */
struct sdioh_info {
struct osl_info *osh; /* osh handler */
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd.h b/drivers/staging/brcm80211/brcmfmac/dhd.h
index a4dcaf8..4bedf41 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd.h
+++ b/drivers/staging/brcm80211/brcmfmac/dhd.h
@@ -129,9 +129,9 @@ struct dhd_info;
#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */
#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */
#define CCA_FLAGS_PREFER_1_6_11 0x10
-#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */
+#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */
-#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */
+#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */
#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */
#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */
#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */
@@ -273,8 +273,8 @@ typedef struct bcm_event {
#define WLC_E_DFS_AP_RESUME 66
#define WLC_E_RESERVED1 67
#define WLC_E_RESERVED2 68
-#define WLC_E_ESCAN_RESULT 69
-#define WLC_E_ACTION_FRAME_OFF_CHAN_COMPLETE 70
+#define WLC_E_ESCAN_RESULT 69
+#define WLC_E_ACTION_FRAME_OFF_CHAN_COMPLETE 70
#define WLC_E_DCS_REQUEST 73
#define WLC_E_FIFO_CREDIT_MAP 74
@@ -518,7 +518,7 @@ typedef struct wl_assoc_params {
*/
chanspec_t chanspec_list[1]; /* list of chanspecs */
} wl_assoc_params_t;
-#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
+#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
/* used for reassociation/roam to a specific BSSID and channel */
typedef wl_assoc_params_t wl_reassoc_params_t;
@@ -531,7 +531,7 @@ typedef struct wl_join_params {
* of the wl_assoc_params_t struct when it does present.
*/
} wl_join_params_t;
-#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t))
+#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t))
/* size of wl_scan_results not including variable length array */
#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t))
diff --git a/drivers/staging/brcm80211/brcmfmac/sdio_host.h b/drivers/staging/brcm80211/brcmfmac/sdio_host.h
index db19533..96a43cb 100644
--- a/drivers/staging/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/staging/brcm80211/brcmfmac/sdio_host.h
@@ -42,7 +42,7 @@ extern const uint bcmsdh_msglevel;
#define SDIO_FUNC_1 1
#define SDIO_FUNC_2 2
-#define SDIOD_FBR_SIZE 0x100
+#define SDIOD_FBR_SIZE 0x100
/* io_en */
#define SDIO_FUNC_ENABLE_1 0x02
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
index 52c1782..3bccc22 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
@@ -322,13 +322,13 @@ static void wl_set_mpc(struct net_device *ndev, int mpc);
static int wl_debugfs_add_netdev_params(struct wl_priv *wl);
static void wl_debugfs_remove_netdev(struct wl_priv *wl);
-#define WL_PRIV_GET() \
+#define WL_PRIV_GET() \
({ \
struct wl_iface *ci = wl_get_drvdata(wl_cfg80211_dev); \
if (unlikely(!ci)) { \
WL_ERR("wl_cfg80211_dev is unavailable\n"); \
BUG(); \
- } \
+ } \
ci_to_wl(ci); \
})
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
index 2469b90..80940bd 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
@@ -97,8 +97,8 @@ do { \
* for 2.6.33 kernel
* or later
*/
-#define WL_SCAN_BUF_MAX (1024 * 8)
-#define WL_TLV_INFO_MAX 1024
+#define WL_SCAN_BUF_MAX (1024 * 8)
+#define WL_TLV_INFO_MAX 1024
#define WL_BSS_INFO_MAX 2048
#define WL_ASSOC_INFO_MAX 512 /*
* needs to grab assoc info from dongle to
@@ -112,7 +112,7 @@ do { \
* to reduce iteration
*/
#define WL_ISCAN_TIMER_INTERVAL_MS 3000
-#define WL_SCAN_ERSULTS_LAST (WL_SCAN_RESULTS_NO_MEM+1)
+#define WL_SCAN_ERSULTS_LAST (WL_SCAN_RESULTS_NO_MEM+1)
#define WL_AP_MAX 256 /* virtually unlimitted as long
* as kernel memory allows
*/
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_iw.h b/drivers/staging/brcm80211/brcmfmac/wl_iw.h
index aa8902c..bfd8172 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_iw.h
+++ b/drivers/staging/brcm80211/brcmfmac/wl_iw.h
@@ -20,8 +20,8 @@
#define WL_SCAN_PARAMS_SSID_MAX 10
#define GET_SSID "SSID="
#define GET_CHANNEL "CH="
-#define GET_NPROBE "NPROBE="
-#define GET_ACTIVE_ASSOC_DWELL "ACTIVE="
+#define GET_NPROBE "NPROBE="
+#define GET_ACTIVE_ASSOC_DWELL "ACTIVE="
#define GET_PASSIVE_ASSOC_DWELL "PASSIVE="
#define GET_HOME_DWELL "HOME="
#define GET_SCAN_TYPE "TYPE="
diff --git a/drivers/staging/brcm80211/brcmsmac/d11.h b/drivers/staging/brcm80211/brcmsmac/d11.h
index 44f4bc0..bb8bb38 100644
--- a/drivers/staging/brcm80211/brcmsmac/d11.h
+++ b/drivers/staging/brcm80211/brcmsmac/d11.h
@@ -1148,25 +1148,25 @@ struct tx_status {
#define M_TX_IDLE_BUSY_RATIO_X_16_OFDM (0x5A * 2)
/* CW RSSI for LCNPHY */
-#define M_LCN_RSSI_0 0x1332
-#define M_LCN_RSSI_1 0x1338
-#define M_LCN_RSSI_2 0x133e
-#define M_LCN_RSSI_3 0x1344
+#define M_LCN_RSSI_0 0x1332
+#define M_LCN_RSSI_1 0x1338
+#define M_LCN_RSSI_2 0x133e
+#define M_LCN_RSSI_3 0x1344
/* SNR for LCNPHY */
-#define M_LCN_SNR_A_0 0x1334
-#define M_LCN_SNR_B_0 0x1336
+#define M_LCN_SNR_A_0 0x1334
+#define M_LCN_SNR_B_0 0x1336
-#define M_LCN_SNR_A_1 0x133a
-#define M_LCN_SNR_B_1 0x133c
+#define M_LCN_SNR_A_1 0x133a
+#define M_LCN_SNR_B_1 0x133c
-#define M_LCN_SNR_A_2 0x1340
-#define M_LCN_SNR_B_2 0x1342
+#define M_LCN_SNR_A_2 0x1340
+#define M_LCN_SNR_B_2 0x1342
-#define M_LCN_SNR_A_3 0x1346
-#define M_LCN_SNR_B_3 0x1348
+#define M_LCN_SNR_A_3 0x1346
+#define M_LCN_SNR_B_3 0x1348
-#define M_LCN_LAST_RESET (81*2)
+#define M_LCN_LAST_RESET (81*2)
#define M_LCN_LAST_LOC (63*2)
#define M_LCNPHY_RESET_STATUS (4902)
#define M_LCNPHY_DSC_TIME (0x98d*2)
@@ -1279,7 +1279,7 @@ struct shm_acparams {
/* Flags in M_HOST_FLAGS4 */
#define MHF4_BPHY_TXCORE0 0x0080 /* force bphy Tx on core 0 (board level WAR) */
-#define MHF4_EXTPA_ENABLE 0x4000 /* for 4313A0 FEM boards */
+#define MHF4_EXTPA_ENABLE 0x4000 /* for 4313A0 FEM boards */
/* Flags in M_HOST_FLAGS5 */
#define MHF5_4313_GPIOCTRL 0x0001
@@ -1673,7 +1673,7 @@ struct macstat {
#define BPHY_PEAK_ENERGY_HI 0x34
#define BPHY_SYNC_CTL 0x35
#define BPHY_TX_PWR_CTRL 0x36
-#define BPHY_TX_EST_PWR 0x37
+#define BPHY_TX_EST_PWR 0x37
#define BPHY_STEP 0x38
#define BPHY_WARMUP 0x39
#define BPHY_LMS_CFF_READ 0x3a
diff --git a/drivers/staging/brcm80211/brcmsmac/main.c b/drivers/staging/brcm80211/brcmsmac/main.c
index 0eba6da..7c91b0b 100644
--- a/drivers/staging/brcm80211/brcmsmac/main.c
+++ b/drivers/staging/brcm80211/brcmsmac/main.c
@@ -224,7 +224,7 @@ const u8 prio2fifo[NUMPRIO] = {
#define _WLC_PREC_NC 14 /* NC - Network Control */
#define MAXMACLIST 64 /* max # source MAC matches */
-#define BCN_TEMPLATE_COUNT 2
+#define BCN_TEMPLATE_COUNT 2
#define WLC_BSSCFG_HW_BCN 0x20 /* The BSS is generating beacons in HW */
@@ -856,7 +856,7 @@ ratespec_t brcms_c_lowest_basic_rspec(struct brcms_c_info *wlc,
/* This function changes the phytxctl for beacon based on current beacon ratespec AND txant
* setting as per this table:
* ratespec CCK ant = wlc->stf->txant
- * OFDM ant = 3
+ * OFDM ant = 3
*/
void brcms_c_beacon_phytxctl_txant_upd(struct brcms_c_info *wlc,
ratespec_t bcn_rspec)
@@ -1356,7 +1356,7 @@ struct wlc_pub *brcms_c_pub(void *wlc)
return ((struct brcms_c_info *) wlc)->pub;
}
-#define CHIP_SUPPORTS_11N(wlc) 1
+#define CHIP_SUPPORTS_11N(wlc) 1
/*
* The common driver entry routine. Error codes should be unique
diff --git a/drivers/staging/brcm80211/brcmsmac/nicpci.c b/drivers/staging/brcm80211/brcmsmac/nicpci.c
index 70d4173..a5eebf3 100644
--- a/drivers/staging/brcm80211/brcmsmac/nicpci.c
+++ b/drivers/staging/brcm80211/brcmsmac/nicpci.c
@@ -65,9 +65,9 @@
#define MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */
/* serdes regs (rev < 10) */
-#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
-#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
-#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
+#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
+#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
+#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
/* SERDES RX registers */
#define SERDES_RX_CTRL 1 /* Rx cntrl */
@@ -100,8 +100,8 @@
#define PCIE_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */
/* different register spaces to access thr'u pcie indirect access */
-#define PCIE_CONFIGREGS 1 /* Access to config space */
-#define PCIE_PCIEREGS 2 /* Access to pcie registers */
+#define PCIE_CONFIGREGS 1 /* Access to config space */
+#define PCIE_PCIEREGS 2 /* Access to pcie registers */
/* PCIE protocol PHY diagnostic registers */
#define PCIE_PLP_STATUSREG 0x204 /* Status */
diff --git a/drivers/staging/brcm80211/brcmsmac/otp.c b/drivers/staging/brcm80211/brcmsmac/otp.c
index 4e19b35..7edc435 100644
--- a/drivers/staging/brcm80211/brcmsmac/otp.c
+++ b/drivers/staging/brcm80211/brcmsmac/otp.c
@@ -460,8 +460,8 @@ static otp_fn_t ipxotp_fn = {
* otp_size()
* otp_read_bit()
* otp_init()
- * otp_read_region()
- * otp_nvread()
+ * otp_read_region()
+ * otp_nvread()
*/
int otp_status(void *oh)
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h b/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h
index 756ad71..3c125c3 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h
+++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h
@@ -80,9 +80,9 @@
#define PHY_MUTE_FOR_PREISM 1
#define PHY_MUTE_ALL 0xffffffff
-#define PHY_NOISE_FIXED_VAL (-95)
-#define PHY_NOISE_FIXED_VAL_NPHY (-92)
-#define PHY_NOISE_FIXED_VAL_LCNPHY (-92)
+#define PHY_NOISE_FIXED_VAL (-95)
+#define PHY_NOISE_FIXED_VAL_NPHY (-92)
+#define PHY_NOISE_FIXED_VAL_LCNPHY (-92)
#define PHY_MODE_CAL 0x0002
#define PHY_MODE_NOISEM 0x0004
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h b/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h
index 9506da5..68938fe 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h
+++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h
@@ -63,7 +63,7 @@ typedef void (*detachfn_t) (phy_info_t *);
#undef ISNPHY
#undef ISLCNPHY
#define ISNPHY(pi) PHYTYPE_IS((pi)->pubpi.phy_type, PHY_TYPE_N)
-#define ISLCNPHY(pi) PHYTYPE_IS((pi)->pubpi.phy_type, PHY_TYPE_LCN)
+#define ISLCNPHY(pi) PHYTYPE_IS((pi)->pubpi.phy_type, PHY_TYPE_LCN)
#define ISPHY_11N_CAP(pi) (ISNPHY(pi) || ISLCNPHY(pi))
@@ -1092,7 +1092,7 @@ extern void wlc_phy_txpower_recalc_target(phy_info_t *pi);
#define LCNPHY_TBL_ID_PAPDCOMPDELTATBL 0x18
#define LCNPHY_TX_POWER_TABLE_SIZE 128
#define LCNPHY_MAX_TX_POWER_INDEX (LCNPHY_TX_POWER_TABLE_SIZE - 1)
-#define LCNPHY_TBL_ID_TXPWRCTL 0x07
+#define LCNPHY_TBL_ID_TXPWRCTL 0x07
#define LCNPHY_TX_PWR_CTRL_OFF 0
#define LCNPHY_TX_PWR_CTRL_SW (0x1 << 15)
#define LCNPHY_TX_PWR_CTRL_HW ((0x1 << 15) | \
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c
index efa985c..4d35e5d 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -26,8 +26,8 @@
#include "phy_lcn.h"
#define PLL_2064_NDIV 90
-#define PLL_2064_LOW_END_VCO 3000
-#define PLL_2064_LOW_END_KVCO 27
+#define PLL_2064_LOW_END_VCO 3000
+#define PLL_2064_LOW_END_KVCO 27
#define PLL_2064_HIGH_END_VCO 4200
#define PLL_2064_HIGH_END_KVCO 68
#define PLL_2064_LOOP_BW_DOUBLER 200
@@ -38,7 +38,7 @@
#define PLL_2064_MHZ 1000000
#define PLL_2064_OPEN_LOOP_DELAY 5
-#define TEMPSENSE 1
+#define TEMPSENSE 1
#define VBATSENSE 2
#define NOISE_IF_UPD_CHK_INTERVAL 1
@@ -50,10 +50,10 @@
#define NOISE_IF_CHK 1
#define NOISE_IF_ON 2
-#define PAPD_BLANKING_PROFILE 3
+#define PAPD_BLANKING_PROFILE 3
#define PAPD2LUT 0
-#define PAPD_CORR_NORM 0
-#define PAPD_BLANKING_THRESHOLD 0
+#define PAPD_CORR_NORM 0
+#define PAPD_BLANKING_THRESHOLD 0
#define PAPD_STOP_AFTER_LAST_UPDATE 0
#define LCN_TARGET_PWR 60
@@ -108,9 +108,9 @@
#define LCNPHY_TBL_ID_SAMPLEPLAY 0x15
#define LCNPHY_TBL_ID_SAMPLEPLAY1 0x16
-#define LCNPHY_TX_PWR_CTRL_RATE_OFFSET 832
-#define LCNPHY_TX_PWR_CTRL_MAC_OFFSET 128
-#define LCNPHY_TX_PWR_CTRL_GAIN_OFFSET 192
+#define LCNPHY_TX_PWR_CTRL_RATE_OFFSET 832
+#define LCNPHY_TX_PWR_CTRL_MAC_OFFSET 128
+#define LCNPHY_TX_PWR_CTRL_GAIN_OFFSET 192
#define LCNPHY_TX_PWR_CTRL_IQ_OFFSET 320
#define LCNPHY_TX_PWR_CTRL_LO_OFFSET 448
#define LCNPHY_TX_PWR_CTRL_PWR_OFFSET 576
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phyreg_n.h b/drivers/staging/brcm80211/brcmsmac/phy/phyreg_n.h
index 211bc3a..a97c3a7 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/phyreg_n.h
+++ b/drivers/staging/brcm80211/brcmsmac/phy/phyreg_n.h
@@ -123,13 +123,13 @@
#define NPHY_REV3_RFSEQ_CMD_CLR_RXRX_BIAS 0xf
#define NPHY_REV3_RFSEQ_CMD_END 0x1f
-#define NPHY_RSSI_SEL_W1 0x0
-#define NPHY_RSSI_SEL_W2 0x1
-#define NPHY_RSSI_SEL_NB 0x2
-#define NPHY_RSSI_SEL_IQ 0x3
-#define NPHY_RSSI_SEL_TSSI_2G 0x4
-#define NPHY_RSSI_SEL_TSSI_5G 0x5
-#define NPHY_RSSI_SEL_TBD 0x6
+#define NPHY_RSSI_SEL_W1 0x0
+#define NPHY_RSSI_SEL_W2 0x1
+#define NPHY_RSSI_SEL_NB 0x2
+#define NPHY_RSSI_SEL_IQ 0x3
+#define NPHY_RSSI_SEL_TSSI_2G 0x4
+#define NPHY_RSSI_SEL_TSSI_5G 0x5
+#define NPHY_RSSI_SEL_TBD 0x6
#define NPHY_RAIL_I 0x0
#define NPHY_RAIL_Q 0x1
diff --git a/drivers/staging/brcm80211/brcmsmac/rate.h b/drivers/staging/brcm80211/brcmsmac/rate.h
index 8b4de8b..268125f 100644
--- a/drivers/staging/brcm80211/brcmsmac/rate.h
+++ b/drivers/staging/brcm80211/brcmsmac/rate.h
@@ -84,7 +84,7 @@ extern const mcs_info_t mcs_table[];
#define WLC_HTPHY 127 /* HT PHY Membership */
#define RSPEC_ACTIVE(rspec) (rspec & (RSPEC_RATE_MASK | RSPEC_MIMORATE))
-#define RSPEC2RATE(rspec) ((rspec & RSPEC_MIMORATE) ? \
+#define RSPEC2RATE(rspec) ((rspec & RSPEC_MIMORATE) ? \
MCS_RATE((rspec & RSPEC_RATE_MASK), RSPEC_IS40MHZ(rspec), RSPEC_ISSGI(rspec)) : \
(rspec & RSPEC_RATE_MASK))
/* return rate in unit of 500Kbps -- for internal use in wlc_rate_sel.c */
@@ -111,8 +111,8 @@ extern const mcs_info_t mcs_table[];
#define PLCP3_STC_SHIFT 4
/* Rate info table; takes a legacy rate or ratespec_t */
-#define IS_MCS(r) (r & RSPEC_MIMORATE)
-#define IS_OFDM(r) (!IS_MCS(r) && (rate_info[(r) & RSPEC_RATE_MASK] & WLC_RATE_FLAG))
+#define IS_MCS(r) (r & RSPEC_MIMORATE)
+#define IS_OFDM(r) (!IS_MCS(r) && (rate_info[(r) & RSPEC_RATE_MASK] & WLC_RATE_FLAG))
#define IS_CCK(r) (!IS_MCS(r) && ( \
((r) & WLC_RATE_MASK) == WLC_RATE_1M || \
((r) & WLC_RATE_MASK) == WLC_RATE_2M || \
diff --git a/drivers/staging/brcm80211/brcmsmac/scb.h b/drivers/staging/brcm80211/brcmsmac/scb.h
index 62e005e..e814e5e1 100644
--- a/drivers/staging/brcm80211/brcmsmac/scb.h
+++ b/drivers/staging/brcm80211/brcmsmac/scb.h
@@ -50,7 +50,7 @@ struct scb_ampdu {
scb_ampdu_tid_ini_t ini[AMPDU_MAX_SCB_TID]; /* initiator info - per tid (NUMPRIO) */
};
-#define SCB_MAGIC 0xbeefcafe
+#define SCB_MAGIC 0xbeefcafe
/* station control block - one per remote MAC address */
struct scb {
diff --git a/drivers/staging/brcm80211/brcmsmac/types.h b/drivers/staging/brcm80211/brcmsmac/types.h
index af1514e..b1370be 100644
--- a/drivers/staging/brcm80211/brcmsmac/types.h
+++ b/drivers/staging/brcm80211/brcmsmac/types.h
@@ -96,7 +96,7 @@
* 2 4330a0
*/
-#define SSLPNCONF 0x0000000f /* Supported sslpnphy revs:
+#define SSLPNCONF 0x0000000f /* Supported sslpnphy revs:
* 0 4329a0/k0
* 1 4329b0/4329C0
* 2 4319a0
diff --git a/drivers/staging/brcm80211/brcmutil/utils.c b/drivers/staging/brcm80211/brcmutil/utils.c
index 2819c1d..e221a3b 100644
--- a/drivers/staging/brcm80211/brcmutil/utils.c
+++ b/drivers/staging/brcm80211/brcmutil/utils.c
@@ -672,7 +672,7 @@ EXPORT_SYMBOL(brcmu_mkiovar);
#define QDBM_TABLE_HIGH_BOUND 64938 /* High bound */
static const u16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = {
-/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */
+/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */
/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000,
/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849,
/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119,
diff --git a/drivers/staging/brcm80211/brcmutil/wifi.c b/drivers/staging/brcm80211/brcmutil/wifi.c
index af88dcb..b9ffe86 100644
--- a/drivers/staging/brcm80211/brcmutil/wifi.c
+++ b/drivers/staging/brcm80211/brcmutil/wifi.c
@@ -129,4 +129,3 @@ int brcmu_mhz2channel(uint freq, uint start_factor)
return ch;
}
EXPORT_SYMBOL(brcmu_mhz2channel);
-
diff --git a/drivers/staging/brcm80211/include/brcmu_utils.h b/drivers/staging/brcm80211/include/brcmu_utils.h
index 78c84e2..b0f36e3 100644
--- a/drivers/staging/brcm80211/include/brcmu_utils.h
+++ b/drivers/staging/brcm80211/include/brcmu_utils.h
@@ -195,7 +195,7 @@ extern int brcmu_iovar_lencheck(const struct brcmu_iovar *table, void *arg,
/* ** driver/apps-shared section ** */
-#define BCME_STRLEN 64 /* Max string length for BCM errors */
+#define BCME_STRLEN 64 /* Max string length for BCM errors */
#ifndef ABS
#define ABS(a) (((a) < 0) ? -(a) : (a))
diff --git a/drivers/staging/brcm80211/include/soc.h b/drivers/staging/brcm80211/include/soc.h
index 3e59377..6e5a705 100644
--- a/drivers/staging/brcm80211/include/soc.h
+++ b/drivers/staging/brcm80211/include/soc.h
@@ -20,7 +20,7 @@
#ifdef SI_ENUM_BASE_VARIABLE
#define SI_ENUM_BASE (sii->pub.si_enum_base)
#else
-#define SI_ENUM_BASE 0x18000000 /* Enumeration space base */
+#define SI_ENUM_BASE 0x18000000 /* Enumeration space base */
#endif /* SI_ENUM_BASE_VARIABLE */
/* core codes */