diff options
author | Finn Thain <fthain@telegraphics.com.au> | 2016-03-23 10:10:12 (GMT) |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2016-04-11 20:57:09 (GMT) |
commit | e4dec6806aceca768b74c1c6402e6d31ecf3c960 (patch) | |
tree | 97e7286f3af77f0ddef34974163964c5db64bd6c | |
parent | 7e9ec8d9cc18a85e8a4c28aef9136867b46aba42 (diff) | |
download | linux-e4dec6806aceca768b74c1c6402e6d31ecf3c960.tar.xz |
ncr5380: Remove REAL_DMA and REAL_DMA_POLL macros
For the NCR5380.c core driver, these macros are never used.
If REAL_DMA were to be defined, compilation would fail.
For the atari_NCR5380.c core driver, REAL_DMA is always defined.
Hence these macros are pointless.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-rw-r--r-- | drivers/scsi/NCR5380.c | 218 | ||||
-rw-r--r-- | drivers/scsi/NCR5380.h | 112 | ||||
-rw-r--r-- | drivers/scsi/atari_NCR5380.c | 62 | ||||
-rw-r--r-- | drivers/scsi/atari_scsi.c | 32 | ||||
-rw-r--r-- | drivers/scsi/sun3_scsi.c | 13 |
5 files changed, 22 insertions, 415 deletions
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 98840be..826b63d1 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -35,18 +35,10 @@ * code so that everything does the same thing that's done at the * end of a pseudo-DMA read operation. * - * 2. Fix REAL_DMA (interrupt driven, polled works fine) - - * basically, transfer size needs to be reduced by one - * and the last byte read as is done with PSEUDO_DMA. - * * 4. Test SCSI-II tagged queueing (I have no devices which support * tagged queueing) */ -#ifndef notyet -#undef REAL_DMA -#endif - #ifdef BOARD_REQUIRES_NO_DELAY #define io_recovery_delay(x) #else @@ -131,12 +123,6 @@ * * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases. * - * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. - * - * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't - * rely on phase mismatch and EOP interrupts to determine end - * of phase. - * * These macros MUST be defined : * * NCR5380_read(register) - read from the specified register @@ -147,15 +133,9 @@ * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented - * REAL functions : - * NCR5380_REAL_DMA should be defined if real DMA is to be used. * Note that the DMA setup functions should return the number of bytes * that they were able to program the controller for. * - * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. - * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize * NCR5380_dma_residual(instance); - residual count @@ -486,12 +466,6 @@ static void prepare_info(struct Scsi_Host *instance) #ifdef DIFFERENTIAL "DIFFERENTIAL " #endif -#ifdef REAL_DMA - "REAL_DMA " -#endif -#ifdef REAL_DMA_POLL - "REAL_DMA_POLL " -#endif #ifdef PARITY "PARITY " #endif @@ -551,9 +525,8 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags) hostdata->id_higher_mask |= i; for (i = 0; i < 8; ++i) hostdata->busy[i] = 0; -#ifdef REAL_DMA - hostdata->dmalen = 0; -#endif + hostdata->dma_len = 0; + spin_lock_init(&hostdata->lock); hostdata->connected = NULL; hostdata->sensing = NULL; @@ -850,11 +823,7 @@ static void NCR5380_main(struct work_struct *work) requeue_cmd(instance, cmd); } } - if (hostdata->connected -#ifdef REAL_DMA - && !hostdata->dmalen -#endif - ) { + if (hostdata->connected && !hostdata->dma_len) { dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n"); NCR5380_information_transfer(instance); done = 0; @@ -919,34 +888,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id) dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n", irq, basr, sr, mr); -#if defined(REAL_DMA) - if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) { - /* Probably End of DMA, Phase Mismatch or Loss of BSY. - * We ack IRQ after clearing Mode Register. Workarounds - * for End of DMA errata need to happen in DMA Mode. - */ - - dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n"); - - int transferred; - - if (!hostdata->connected) - panic("scsi%d : DMA interrupt with no connected cmd\n", - instance->hostno); - - transferred = hostdata->dmalen - NCR5380_dma_residual(instance); - hostdata->connected->SCp.this_residual -= transferred; - hostdata->connected->SCp.ptr += transferred; - hostdata->dmalen = 0; - - /* FIXME: we need to poll briefly then defer a workqueue task ! */ - NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2 * HZ); - - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - NCR5380_write(MODE_REG, MR_BASE); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else -#endif /* REAL_DMA */ if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) && (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) { /* Probably reselected */ @@ -1495,7 +1436,7 @@ timeout: return -1; } -#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL) +#if defined(PSEUDO_DMA) /* * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, * unsigned char *phase, int *count, unsigned char **data) @@ -1525,34 +1466,14 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, register unsigned char *d = *data; unsigned char tmp; int foo; -#if defined(REAL_DMA_POLL) - int cnt, toPIO; - unsigned char saved_data = 0, overrun = 0, residue; -#endif if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) { *phase = tmp; return -1; } -#if defined(REAL_DMA) || defined(REAL_DMA_POLL) - if (p & SR_IO) { - if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) - c -= 2; - } - hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c); - - dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n", - (p & SR_IO) ? "receive" : "send", c, *data); -#endif NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); -#ifdef REAL_DMA - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY | - MR_ENABLE_EOP_INTR); -#elif defined(REAL_DMA_POLL) - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY); -#else /* * Note : on my sample board, watch-dog timeouts occurred when interrupts * were not disabled for the duration of a single DMA transfer, from @@ -1564,7 +1485,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, MR_ENABLE_EOP_INTR); else NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY); -#endif /* def REAL_DMA */ dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG)); @@ -1584,14 +1504,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, io_recovery_delay(1); } -#if defined(REAL_DMA_POLL) - do { - tmp = NCR5380_read(BUS_AND_STATUS_REG); - } while ((tmp & BASR_PHASE_MATCH) && !(tmp & (BASR_BUSY_ERROR | BASR_END_DMA_TRANSFER))); - /* - * At this point, either we've completed DMA, or we have a phase mismatch, - * or we've unexpectedly lost BUSY (which is a real error). + * A note regarding the DMA errata workarounds for early NMOS silicon. * * For DMA sends, we want to wait until the last byte has been * transferred out over the bus before we turn off DMA mode. Alas, there @@ -1618,79 +1532,18 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, * properly, or the target switches to MESSAGE IN phase to signal a * disconnection (either operation bringing the DMA to a clean halt). * However, in order to handle scatter-receive, we must work around the - * problem. The chosen fix is to DMA N-2 bytes, then check for the + * problem. The chosen fix is to DMA fewer bytes, then check for the * condition before taking the NCR5380 out of DMA mode. One or two extra * bytes are transferred via PIO as necessary to fill out the original * request. */ if (p & SR_IO) { - if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) { - udelay(10); - if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) == - (BASR_PHASE_MATCH | BASR_ACK)) { - saved_data = NCR5380_read(INPUT_DATA_REGISTER); - overrun = 1; - } - } - } else { - int limit = 100; - while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) { - if (!(tmp & BASR_PHASE_MATCH)) - break; - if (--limit < 0) - break; - } - } - - dsprintk(NDEBUG_DMA, "polled DMA transfer complete, basr 0x%02x, sr 0x%02x\n", - tmp, NCR5380_read(STATUS_REG)); - - NCR5380_write(MODE_REG, MR_BASE); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - - residue = NCR5380_dma_residual(instance); - c -= residue; - *count -= c; - *data += c; - *phase = NCR5380_read(STATUS_REG) & PHASE_MASK; - - if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS) && - *phase == p && (p & SR_IO) && residue == 0) { - if (overrun) { - dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n"); - **data = saved_data; - *data += 1; - *count -= 1; - cnt = toPIO = 1; - } else { - printk("No overrun??\n"); - cnt = toPIO = 2; - } - dprintk(NDEBUG_DMA, "Doing %d-byte PIO to 0x%X\n", cnt, *data); - NCR5380_transfer_pio(instance, phase, &cnt, data); - *count -= toPIO - cnt; - } - - dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count)); - return 0; - -#elif defined(REAL_DMA) - return 0; -#else /* defined(REAL_DMA_POLL) */ - if (p & SR_IO) { foo = NCR5380_pread(instance, d, hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1); if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) { /* - * We can't disable DMA mode after successfully transferring - * what we plan to be the last byte, since that would open up - * a race condition where if the target asserted REQ before - * we got the DMA mode reset, the NCR5380 would have latched - * an additional byte into the INPUT DATA register and we'd - * have dropped it. - * - * The workaround was to transfer one fewer bytes than we + * The workaround was to transfer fewer bytes than we * intended to with the pseudo-DMA read function, wait for * the chip to latch the last byte, read it, and then disable * pseudo-DMA mode. @@ -1738,9 +1591,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, *count = 0; *phase = NCR5380_read(STATUS_REG) & PHASE_MASK; return foo; -#endif /* def REAL_DMA */ } -#endif /* defined(REAL_DMA) | defined(PSEUDO_DMA) */ +#endif /* PSEUDO_DMA */ /* * Function : NCR5380_information_transfer (struct Scsi_Host *instance) @@ -1831,7 +1683,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) * in an unconditional loop. */ -#if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) +#if defined(PSEUDO_DMA) transfersize = 0; if (!cmd->device->borken) transfersize = NCR5380_dma_xfer_len(instance, cmd, phase); @@ -1855,7 +1707,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) } else cmd->SCp.this_residual -= transfersize - len; } else -#endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */ +#endif /* PSEUDO_DMA */ { /* Break up transfer into 3 ms chunks, * presuming 6 accesses per handshake. @@ -2202,52 +2054,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance) scmd_id(tmp), tmp->device->lun, tmp->tag); } -/* - * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) - * - * Purpose : called by interrupt handler when DMA finishes or a phase - * mismatch occurs (which would finish the DMA transfer). - * - * Inputs : instance - this instance of the NCR5380. - * - * Returns : pointer to the scsi_cmnd structure for which the I_T_L - * nexus has been reestablished, on failure NULL is returned. - */ - -#ifdef REAL_DMA -static void NCR5380_dma_complete(NCR5380_instance * instance) { - struct NCR5380_hostdata *hostdata = shost_priv(instance); - int transferred; - - /* - * XXX this might not be right. - * - * Wait for final byte to transfer, ie wait for ACK to go false. - * - * We should use the Last Byte Sent bit, unfortunately this is - * not available on the 5380/5381 (only the various CMOS chips) - * - * FIXME: timeout, and need to handle long timeout/irq case - */ - - NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ); - - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - - /* - * The only places we should see a phase mismatch and have to send - * data from the same set of pointers will be the data transfer - * phases. So, residual, requested length are only important here. - */ - - if (!(hostdata->connected->SCp.phase & SR_CD)) { - transferred = instance->dmalen - NCR5380_dma_residual(); - hostdata->connected->SCp.this_residual -= transferred; - hostdata->connected->SCp.ptr += transferred; - } -} -#endif /* def REAL_DMA */ - /** * list_find_cmd - test for presence of a command in a linked list * @haystack: list of commands @@ -2359,9 +2165,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) if (hostdata->connected == cmd) { dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd); hostdata->connected = NULL; -#ifdef REAL_DMA hostdata->dma_len = 0; -#endif if (do_abort(instance)) { set_host_byte(cmd, DID_ERROR); complete_cmd(instance, cmd); @@ -2464,9 +2268,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) for (i = 0; i < 8; ++i) hostdata->busy[i] = 0; -#ifdef REAL_DMA hostdata->dma_len = 0; -#endif queue_work(hostdata->work_q, &hostdata->main_task); spin_unlock_irqrestore(&hostdata->lock, flags); diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h index a792886..0b03ba2 100644 --- a/drivers/scsi/NCR5380.h +++ b/drivers/scsi/NCR5380.h @@ -239,9 +239,7 @@ struct NCR5380_hostdata { struct Scsi_Host *host; /* Host backpointer */ unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */ unsigned char busy[8]; /* index = target, bit = lun */ -#if defined(REAL_DMA) || defined(REAL_DMA_POLL) int dma_len; /* requested length of DMA */ -#endif unsigned char last_message; /* last message OUT */ struct scsi_cmnd *connected; /* currently connected cmnd */ struct scsi_cmnd *selecting; /* cmnd to be connected */ @@ -319,118 +317,8 @@ static void NCR5380_main(struct work_struct *work); static const char *NCR5380_info(struct Scsi_Host *instance); static void NCR5380_reselect(struct Scsi_Host *instance); static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *); -#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL) static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); -#endif static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); -#if (defined(REAL_DMA) || defined(REAL_DMA_POLL)) - -#if defined(i386) || defined(__alpha__) - -/** - * NCR5380_pc_dma_setup - setup ISA DMA - * @instance: adapter to set up - * @ptr: block to transfer (virtual address) - * @count: number of bytes to transfer - * @mode: DMA controller mode to use - * - * Program the DMA controller ready to perform an ISA DMA transfer - * on this chip. - * - * Locks: takes and releases the ISA DMA lock. - */ - -static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode) -{ - unsigned limit; - unsigned long bus_addr = virt_to_bus(ptr); - unsigned long flags; - - if (instance->dma_channel <= 3) { - if (count > 65536) - count = 65536; - limit = 65536 - (bus_addr & 0xFFFF); - } else { - if (count > 65536 * 2) - count = 65536 * 2; - limit = 65536 * 2 - (bus_addr & 0x1FFFF); - } - - if (count > limit) - count = limit; - - if ((count & 1) || (bus_addr & 1)) - panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no); - - flags=claim_dma_lock(); - disable_dma(instance->dma_channel); - clear_dma_ff(instance->dma_channel); - set_dma_addr(instance->dma_channel, bus_addr); - set_dma_count(instance->dma_channel, count); - set_dma_mode(instance->dma_channel, mode); - enable_dma(instance->dma_channel); - release_dma_lock(flags); - - return count; -} - -/** - * NCR5380_pc_dma_write_setup - setup ISA DMA write - * @instance: adapter to set up - * @ptr: block to transfer (virtual address) - * @count: number of bytes to transfer - * - * Program the DMA controller ready to perform an ISA DMA write to the - * SCSI controller. - * - * Locks: called routines take and release the ISA DMA lock. - */ - -static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count) -{ - return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE); -} - -/** - * NCR5380_pc_dma_read_setup - setup ISA DMA read - * @instance: adapter to set up - * @ptr: block to transfer (virtual address) - * @count: number of bytes to transfer - * - * Program the DMA controller ready to perform an ISA DMA read from the - * SCSI controller. - * - * Locks: called routines take and release the ISA DMA lock. - */ - -static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count) -{ - return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ); -} - -/** - * NCR5380_pc_dma_residual - return bytes left - * @instance: adapter - * - * Reports the number of bytes left over after the DMA was terminated. - * - * Locks: takes and releases the ISA DMA lock. - */ - -static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance) -{ - unsigned long flags; - int tmp; - - flags = claim_dma_lock(); - clear_dma_ff(instance->dma_channel); - tmp = get_dma_residue(instance->dma_channel); - release_dma_lock(flags); - - return tmp; -} -#endif /* defined(i386) || defined(__alpha__) */ -#endif /* defined(REAL_DMA) */ #endif /* __KERNEL__ */ #endif /* NCR5380_H */ diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 389825b..c669098 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -112,15 +112,9 @@ * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented - * REAL functions : - * NCR5380_REAL_DMA should be defined if real DMA is to be used. * Note that the DMA setup functions should return the number of bytes * that they were able to program the controller for. * - * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. - * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize * NCR5380_dma_residual(instance); - residual count @@ -586,9 +580,6 @@ static void prepare_info(struct Scsi_Host *instance) #ifdef DIFFERENTIAL "DIFFERENTIAL " #endif -#ifdef REAL_DMA - "REAL_DMA " -#endif #ifdef PARITY "PARITY " #endif @@ -629,9 +620,8 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags) #ifdef SUPPORT_TAGS init_tags(hostdata); #endif -#if defined (REAL_DMA) hostdata->dma_len = 0; -#endif + spin_lock_init(&hostdata->lock); hostdata->connected = NULL; hostdata->sensing = NULL; @@ -974,11 +964,7 @@ static void NCR5380_main(struct work_struct *work) #endif } } - if (hostdata->connected -#ifdef REAL_DMA - && !hostdata->dma_len -#endif - ) { + if (hostdata->connected && !hostdata->dma_len) { dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n"); NCR5380_information_transfer(instance); done = 0; @@ -990,7 +976,6 @@ static void NCR5380_main(struct work_struct *work) } -#ifdef REAL_DMA /* * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) * @@ -1071,7 +1056,6 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance) } } } -#endif /* REAL_DMA */ /** @@ -1126,7 +1110,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id) dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n", irq, basr, sr, mr); -#if defined(REAL_DMA) if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) { /* Probably End of DMA, Phase Mismatch or Loss of BSY. * We ack IRQ after clearing Mode Register. Workarounds @@ -1142,9 +1125,7 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id) NCR5380_write(MODE_REG, MR_BASE); NCR5380_read(RESET_PARITY_INTERRUPT_REG); } - } else -#endif /* REAL_DMA */ - if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) && + } else if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) && (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) { /* Probably reselected */ NCR5380_write(SELECT_ENABLE_REG, 0); @@ -1710,7 +1691,7 @@ timeout: return -1; } -#if defined(REAL_DMA) + /* * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, * unsigned char *phase, int *count, unsigned char **data) @@ -1819,7 +1800,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, return 0; } -#endif /* defined(REAL_DMA) */ /* * Function : NCR5380_information_transfer (struct Scsi_Host *instance) @@ -1866,7 +1846,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) } #if defined(CONFIG_SUN3) if (phase == PHASE_CMDOUT) { -#if defined(REAL_DMA) void *d; unsigned long count; @@ -1885,7 +1864,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) sun3_dma_setup_done = cmd; } } -#endif #ifdef SUN3_SCSI_VME dregs->csr |= CSR_INTR; #endif @@ -1943,12 +1921,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) * in an unconditional loop. */ - /* ++roman: I suggest, this should be - * #if def(REAL_DMA) - * instead of leaving REAL_DMA out. - */ - -#if defined(REAL_DMA) #if !defined(CONFIG_SUN3) transfersize = 0; if (!cmd->device->borken) @@ -1972,21 +1944,9 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) do_abort(instance); cmd->result = DID_ERROR << 16; /* XXX - need to source or sink data here, as appropriate */ - } else { -#ifdef REAL_DMA - /* ++roman: When using real DMA, - * information_transfer() should return after - * starting DMA since it has nothing more to - * do. - */ + } else return; -#else - cmd->SCp.this_residual -= transfersize - len; -#endif - } - } else -#endif /* defined(REAL_DMA) */ - { + } else { /* Break up transfer into 3 ms chunks, * presuming 6 accesses per handshake. */ @@ -1997,7 +1957,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) (unsigned char **)&cmd->SCp.ptr); cmd->SCp.this_residual -= transfersize - len; } -#if defined(CONFIG_SUN3) && defined(REAL_DMA) +#if defined(CONFIG_SUN3) /* if we had intended to dma that command clear it */ if (sun3_dma_setup_done == cmd) sun3_dma_setup_done = NULL; @@ -2305,7 +2265,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) return; } -#if defined(CONFIG_SUN3) && defined(REAL_DMA) +#if defined(CONFIG_SUN3) /* acknowledge toggle to MSGIN */ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(PHASE_MSGIN)); @@ -2392,7 +2352,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) return; } -#if defined(CONFIG_SUN3) && defined(REAL_DMA) +#if defined(CONFIG_SUN3) /* engage dma setup for the command we just saw */ { void *d; @@ -2555,9 +2515,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) if (hostdata->connected == cmd) { dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd); hostdata->connected = NULL; -#ifdef REAL_DMA hostdata->dma_len = 0; -#endif if (do_abort(instance)) { set_host_byte(cmd, DID_ERROR); complete_cmd(instance, cmd); @@ -2664,9 +2622,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) #endif for (i = 0; i < 8; ++i) hostdata->busy[i] = 0; -#ifdef REAL_DMA hostdata->dma_len = 0; -#endif queue_work(hostdata->work_q, &hostdata->main_task); maybe_release_dma_irq(instance); diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index 78d1b29..c68e895 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -85,7 +85,6 @@ /* Definitions for the core NCR5380 driver. */ -#define REAL_DMA #define SUPPORT_TAGS #define MAX_TAGS 32 #define DMA_MIN_SIZE 32 @@ -159,14 +158,11 @@ static inline unsigned long SCSI_DMA_GETADR(void) return adr; } -#ifdef REAL_DMA static void atari_scsi_fetch_restbytes(void); -#endif static unsigned char (*atari_scsi_reg_read)(unsigned char reg); static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value); -#ifdef REAL_DMA static unsigned long atari_dma_residual, atari_dma_startaddr; static short atari_dma_active; /* pointer to the dribble buffer */ @@ -185,7 +181,6 @@ static char *atari_dma_orig_addr; /* mask for address bits that can't be used with the ST-DMA */ static unsigned long atari_dma_stram_mask; #define STRAM_ADDR(a) (((a) & atari_dma_stram_mask) == 0) -#endif static int setup_can_queue = -1; module_param(setup_can_queue, int, 0); @@ -201,8 +196,6 @@ static int setup_toshiba_delay = -1; module_param(setup_toshiba_delay, int, 0); -#if defined(REAL_DMA) - static int scsi_dma_is_ignored_buserr(unsigned char dma_stat) { int i; @@ -255,12 +248,9 @@ static void scsi_dma_buserr(int irq, void *dummy) } #endif -#endif - static irqreturn_t scsi_tt_intr(int irq, void *dev) { -#ifdef REAL_DMA struct Scsi_Host *instance = dev; struct NCR5380_hostdata *hostdata = shost_priv(instance); int dma_stat; @@ -342,8 +332,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev) tt_scsi_dma.dma_ctrl = 0; } -#endif /* REAL_DMA */ - NCR5380_intr(irq, dev); return IRQ_HANDLED; @@ -352,7 +340,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev) static irqreturn_t scsi_falcon_intr(int irq, void *dev) { -#ifdef REAL_DMA struct Scsi_Host *instance = dev; struct NCR5380_hostdata *hostdata = shost_priv(instance); int dma_stat; @@ -405,15 +392,12 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dev) atari_dma_orig_addr = NULL; } -#endif /* REAL_DMA */ - NCR5380_intr(irq, dev); return IRQ_HANDLED; } -#ifdef REAL_DMA static void atari_scsi_fetch_restbytes(void) { int nr; @@ -436,7 +420,6 @@ static void atari_scsi_fetch_restbytes(void) *dst++ = *src++; } } -#endif /* REAL_DMA */ /* This function releases the lock on the DMA chip if there is no @@ -508,8 +491,6 @@ __setup("atascsi=", atari_scsi_setup); #endif /* !MODULE */ -#if defined(REAL_DMA) - static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance, void *data, unsigned long count, int dir) @@ -703,9 +684,6 @@ static unsigned long atari_dma_xfer_len(unsigned long wanted_len, } -#endif /* REAL_DMA */ - - /* NCR5380 register access functions * * There are separate functions for TT and Falcon, because the access @@ -745,7 +723,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd) local_irq_save(flags); -#ifdef REAL_DMA /* Abort a maybe active DMA transfer */ if (IS_A_TT()) { tt_scsi_dma.dma_ctrl = 0; @@ -754,7 +731,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd) atari_dma_active = 0; atari_dma_orig_addr = NULL; } -#endif rv = NCR5380_bus_reset(cmd); @@ -850,8 +826,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev) } } - -#ifdef REAL_DMA /* If running on a Falcon and if there's TT-Ram (i.e., more than one * memory block, since there's always ST-Ram in a Falcon), then * allocate a STRAM_BUFFER_SIZE byte dribble buffer for transfers @@ -867,7 +841,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev) atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer); atari_dma_orig_addr = 0; } -#endif instance = scsi_host_alloc(&atari_scsi_template, sizeof(struct NCR5380_hostdata)); @@ -897,7 +870,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev) goto fail_irq; } tt_mfp.active_edge |= 0x80; /* SCSI int on L->H */ -#ifdef REAL_DMA + tt_scsi_dma.dma_ctrl = 0; atari_dma_residual = 0; @@ -919,17 +892,14 @@ static int __init atari_scsi_probe(struct platform_device *pdev) hostdata->read_overruns = 4; } -#endif } else { /* Nothing to do for the interrupt: the ST-DMA is initialized * already. */ -#ifdef REAL_DMA atari_dma_residual = 0; atari_dma_active = 0; atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000 : 0xff000000); -#endif } NCR5380_maybe_reset_bus(instance); diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index b9de487..5551b16 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -38,7 +38,6 @@ /* Definitions for the core NCR5380 driver. */ -#define REAL_DMA /* #define SUPPORT_TAGS */ /* minimum number of bytes to do dma on */ #define DMA_MIN_SIZE 129 @@ -527,15 +526,9 @@ static int __init sun3_scsi_probe(struct platform_device *pdev) error = request_irq(instance->irq, scsi_sun3_intr, 0, "NCR5380", instance); if (error) { -#ifdef REAL_DMA pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n", instance->host_no, instance->irq); goto fail_irq; -#else - pr_warn(PFX "scsi%d: IRQ %d not free, interrupts disabled\n", - instance->host_no, instance->irq); - instance->irq = NO_IRQ; -#endif } dregs->csr = 0; @@ -565,8 +558,7 @@ static int __init sun3_scsi_probe(struct platform_device *pdev) return 0; fail_host: - if (instance->irq != NO_IRQ) - free_irq(instance->irq, instance); + free_irq(instance->irq, instance); fail_irq: NCR5380_exit(instance); fail_init: @@ -583,8 +575,7 @@ static int __exit sun3_scsi_remove(struct platform_device *pdev) struct Scsi_Host *instance = platform_get_drvdata(pdev); scsi_remove_host(instance); - if (instance->irq != NO_IRQ) - free_irq(instance->irq, instance); + free_irq(instance->irq, instance); NCR5380_exit(instance); scsi_host_put(instance); if (udc_regs) |