Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 33 insertions, 14 deletions

diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
index 0574a77..e1d01df 100644
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
@@ -3,29 +3,48 @@ STMicroelectronics STi SATA controller
 This binding describes a SATA device.
 
 Required properties:
- - compatible	   : Must be "st,sti-ahci"
+ - compatible	   : Must be "st,ahci"
  - reg		   : Physical base addresses and length of register sets
  - interrupts	   : Interrupt associated with the SATA device
  - interrupt-names :   Associated name must be; "hostc"
- - resets	   : The power-down and soft-reset lines of SATA IP
- - reset-names	   :   Associated names must be; "pwr-dwn" and "sw-rst"
  - clocks	   : The phandle for the clock
  - clock-names	   :   Associated name must be; "ahci_clk"
- - phys		   : The phandle for the PHY device
+ - phys		   : The phandle for the PHY port
  - phy-names	   :   Associated name must be; "ahci_phy"
 
+Optional properties:
+ - resets	   : The power-down, soft-reset and power-reset lines of SATA IP
+ - reset-names	   :   Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst"
+
 Example:
 
+	/* Example for stih416 */
 	sata0: sata@fe380000 {
-		compatible      = "st,sti-ahci";
-		reg             = <0xfe380000 0x1000>;
-		interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
-		interrupt-names = "hostc";
-		phys	        = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
-		phy-names       = "ahci_phy";
-		resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
+		compatible	= "st,ahci";
+		reg		= <0xfe380000 0x1000>;
+		interrupts	= <GIC_SPI 157 IRQ_TYPE_NONE>;
+		interrupt-names	= "hostc";
+		phys		= <&phy_port0 PHY_TYPE_SATA>;
+		phy-names	= "ahci_phy";
+		resets		= <&powerdown STIH416_SATA0_POWERDOWN>,
 				  <&softreset STIH416_SATA0_SOFTRESET>;
-		reset-names     = "pwr-dwn", "sw-rst";
-		clocks	        = <&clk_s_a0_ls CLK_ICN_REG>;
-		clock-names     = "ahci_clk";
+		reset-names	= "pwr-dwn", "sw-rst";
+		clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
+		clock-names	= "ahci_clk";
+	};
+
+	/* Example for stih407 family silicon */
+	sata0: sata@9b20000 {
+		compatible	= "st,ahci";
+		reg		= <0x9b20000 0x1000>;
+		interrupts	= <GIC_SPI 159 IRQ_TYPE_NONE>;
+		interrupt-names	= "hostc";
+		phys		= <&phy_port0 PHY_TYPE_SATA>;
+		phy-names	= "ahci_phy";
+		resets		= <&powerdown STIH407_SATA0_POWERDOWN>,
+				  <&softreset STIH407_SATA0_SOFTRESET>,
+				  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+		reset-names	= "pwr-dwn", "sw-rst", "pwr-rst";
+		clocks		= <&clk_s_c0_flexgen CLK_ICN_REG>;
+		clock-names	= "ahci_clk";
 	};