Merge tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Merge "ARM: imx: device tree updates for 3.17" from Shawn Guo:

The i.MX device tree updates for 3.17:
 - Add device tree sources and pin function header for i.MX6SX SoC
 - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio
   and GPIO key enabled
 - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos
   imx6dl boards, Rex Pro and Basic, Ka-Ro TX6
 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board
 - Split M28EVK and M53EVK into SoM and EVK parts
 - A few correction around SDMA, SSI and SATA device nodes
 - Add eSATA support for Cubox-i board
 - Updates on edmqmx6 to enable PCIe, I2C and CAN
 - Use DT macro for clock ID for imx27 and imx6qdl
 - Add FlexCAN support for VF610 SoC

* tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (125 commits)
  ARM: dts: vf610: add FlexCAN node
  ARM: dts: add initial Rex Basic board support
  ARM: dts: add initial Rex Pro board support
  ARM: dts: mx5: Split M53EVK into SoM and EVK parts
  ARM: dts: imx6: RIoTboard explicitly define pad settings
  ARM: dts: vf610: fix length of eshdc1 register property
  ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
  ARM: dts: imx53: correct clock-names of SATA node
  ARM: imx6: Align ssi nodes between mx6 variants
  ARM: i.MX27 clk: dts: Use clock defines in DTS files
  ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sx
  ARM: dts: imx6sx-sdb: Add audio support
  ARM: dts: imx6sx: Pass the fsl,fifo-depth property
  ARM: dts: imx6sx: Fix sdma node
  ARM: dts: imx6: edmqmx6: Add can bus
  ARM: dts: imx6: edmqmx6: Add two other i2c buses
  ARM: dts: imx6: edmqmx6: Add PCIe support
  ARM: dts: imx25-pdk: Add USB OTG support
  ARM: dts: i.MX53: add aipstz nodes
  ARM: dts: mxs: Split M28EVK into SoM and EVK parts
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 26 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
new file mode 100644
index 0000000..b7adf4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+	clks: ccm@0021b000 {
+		#clock-cells = <1>;
+		compatible = "fsl,imx1-ccm";
+		reg = <0x0021b000 0x1000>;
+	};
+
+	pwm: pwm@00208000 {
+		#pwm-cells = <2>;
+		compatible = "fsl,imx1-pwm";
+		reg = <0x00208000 0x1000>;
+		interrupts = <34>;
+		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+		clock-names = "ipg", "per";
+	};