Merge tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg KH:
 "Here's the "big" char/misc driver update for 4.3-rc1.

  Not much really interesting here, just a number of little changes all
  over the place, and some nice consolidation of the nvmem drivers to a
  common framework.  As usual, the mei drivers stand out as the largest
  "churn" to handle new devices and features in their hardware.

  All have been in linux-next for a while with no issues"

* tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  auxdisplay: ks0108: initialize local parport variable
  extcon: palmas: Fix build break due to devm_gpiod_get_optional API change
  extcon: palmas: Support GPIO based USB ID detection
  extcon: Fix signedness bugs about break error handling
  extcon: Drop owner assignment from i2c_driver
  extcon: arizona: Simplify pdata symantics for micd_dbtime
  extcon: arizona: Declare 3-pole jack if we detect open circuit on mic
  extcon: Add exception handling to prevent the NULL pointer access
  extcon: arizona: Ensure variables are set for headphone detection
  extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio
  extcon: arizona: Add basic microphone detection DT/ACPI bindings
  extcon: arizona: Update to use the new device properties API
  extcon: palmas: Remove the mutually_exclusive array
  extcon: Remove optional print_state() function pointer of struct extcon_dev
  extcon: Remove duplicate header file in extcon.h
  extcon: max77843: Clear IRQ bits state before request IRQ
  toshiba laptop: replace ioremap_cache with ioremap
  misc: eeprom: max6875: clean up max6875_read()
  misc: eeprom: clean up eeprom_read()
  misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write
  ...

6 files changed, 172 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 65a6db2..62938eb 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -17,6 +17,7 @@ its hardware characteristcs.
 		- "arm,coresight-tmc", "arm,primecell";
 		- "arm,coresight-funnel", "arm,primecell";
 		- "arm,coresight-etm3x", "arm,primecell";
+		- "arm,coresight-etm4x", "arm,primecell";
 		- "qcom,coresight-replicator1x", "arm,primecell";
 
 	* reg: physical base address and length of the register
diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
index 45414bb..f61d5af 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
@@ -10,8 +10,11 @@ Required Properties:
 
 Optional Properties:
  - ti,wakeup : To enable the wakeup comparator in probe
- - ti,enable-id-detection: Perform ID detection.
+ - ti,enable-id-detection: Perform ID detection. If id-gpio is specified
+		it performs id-detection using GPIO else using OTG core.
  - ti,enable-vbus-detection: Perform VBUS detection.
+ - id-gpio: gpio for GPIO ID detection. See gpio binding.
+ - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds.
 
 palmas-usb {
        compatible = "ti,twl6035-usb", "ti,palmas-usb";
diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index fabdf64..d543ed3 100644
--- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -4,6 +4,10 @@ Required properties:
 - compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
 - reg: Should contain registers location and length
 
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
 Example for sun4i:
 	sid@01c23800 {
 		compatible = "allwinner,sun4i-a10-sid";
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt
new file mode 100644
index 0000000..b52bc11
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt
@@ -0,0 +1,80 @@
+= NVMEM(Non Volatile Memory) Data Device Tree Bindings =
+
+This binding is intended to represent the location of hardware
+configuration data stored in NVMEMs like eeprom, efuses and so on.
+
+On a significant proportion of boards, the manufacturer has stored
+some data on NVMEM, for the OS to be able to retrieve these information
+and act upon it. Obviously, the OS has to know about where to retrieve
+these data from, and where they are stored on the storage device.
+
+This document is here to document this.
+
+= Data providers =
+Contains bindings specific to provider drivers and data cells as children
+of this node.
+
+Optional properties:
+ read-only: Mark the provider as read only.
+
+= Data cells =
+These are the child nodes of the provider which contain data cell
+information like offset and size in nvmem provider.
+
+Required properties:
+reg:	specifies the offset in byte within the storage device.
+
+Optional properties:
+
+bits:	Is pair of bit location and number of bits, which specifies offset
+	in bit and number of bits within the address range specified by reg property.
+	Offset takes values from 0-7.
+
+For example:
+
+	/* Provider */
+	qfprom: qfprom@00700000 {
+		...
+
+		/* Data cells */
+		tsens_calibration: calib@404 {
+			reg = <0x404 0x10>;
+		};
+
+		tsens_calibration_bckp: calib_bckp@504 {
+			reg = <0x504 0x11>;
+			bits = <6 128>
+		};
+
+		pvs_version: pvs-version@6 {
+			reg = <0x6 0x2>
+			bits = <7 2>
+		};
+
+		speed_bin: speed-bin@c{
+			reg = <0xc 0x1>;
+			bits = <2 3>;
+
+		};
+		...
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells/providers.
+
+Required-properties:
+nvmem-cells: list of phandle to the nvmem data cells.
+nvmem-cell-names: names for the each nvmem-cells specified. Required if
+	nvmem-cells is used.
+
+Optional-properties:
+nvmem	: list of phandles to nvmem providers.
+nvmem-names: names for the each nvmem provider. required if nvmem is used.
+
+For example:
+
+	tsens {
+		...
+		nvmem-cells = <&tsens_calibration>;
+		nvmem-cell-names = "calibration";
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt
new file mode 100644
index 0000000..4ad68b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt
@@ -0,0 +1,35 @@
+= Qualcomm QFPROM device tree bindings =
+
+This binding is intended to represent QFPROM which is found in most QCOM SOCs.
+
+Required properties:
+- compatible: should be "qcom,qfprom"
+- reg: Should contain registers location and length
+
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	qfprom: qfprom@00700000 {
+		compatible 	= "qcom,qfprom";
+		reg		= <0x00700000 0x8000>;
+		...
+		/* Data cells */
+		tsens_calibration: calib@404 {
+			reg = <0x4404 0x10>;
+		};
+	};
+
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+	tsens {
+		...
+		nvmem-cells = <&tsens_calibration>;
+		nvmem-cell-names = "calibration";
+	};
diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
new file mode 100644
index 0000000..0e6d875
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
@@ -0,0 +1,48 @@
+Qualcomm Coincell Charger:
+
+The hardware block controls charging for a coincell or capacitor that is
+used to provide power backup for certain features of the power management
+IC (PMIC)
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be: "qcom,pm8941-coincell"
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: base address of the coincell charger registers
+
+- qcom,rset-ohms:
+	Usage: required
+	Value type: <u32>
+	Definition: resistance (in ohms) for current-limiting resistor
+		must be one of: 800, 1200, 1700, 2100
+
+- qcom,vset-millivolts:
+	Usage: required
+	Value type: <u32>
+	Definition: voltage (in millivolts) to apply for charging
+		must be one of: 2500, 3000, 3100, 3200
+
+- qcom,charger-disable:
+	Usage: optional
+	Value type: <boolean>
+	Definition: definining this property disables charging
+
+This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
+as a child node in DTS of that node.  See ../mfd/qcom,spmi-pmic.txt and
+../mfd/qcom-pm8xxx.txt
+
+Example:
+
+	pm8941@0 {
+		coincell@2800 {
+			compatible = "qcom,pm8941-coincell";
+			reg = <0x2800>;
+
+			qcom,rset-ohms = <2100>;
+			qcom,vset-millivolts = <3000>;
+		};
+	};