Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "Drivers, drivers, drivers...  No interesting input core changes this
  time"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits)
  Input: elan_i2c - use iap_version to get firmware information
  Input: max8997_haptic - fix module alias
  Input: elan_i2c - fix typos for validpage_count
  Input: psmouse - add small delay for IBM trackpoint pass-through mode
  Input: synaptics - fix handling of disabling gesture mode
  Input: elan_i2c - enable ELAN0100 acpi panels
  Input: gpio-keys - report error when disabling unsupported key
  Input: sur40 - fix error return code
  Input: sentelic - silence some underflow warnings
  Input: zhenhua - switch to using bitrev8()
  Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency
  Input: cap11xx - add LED support
  Input: elants_i2c - fix for devm_gpiod_get API change
  Input: elan_i2c - enable asynchronous probing
  Input: elants_i2c - enable asynchronous probing
  Input: elants_i2c - wire up regulator support
  Input: do not emit unneeded EV_SYN when suspending
  Input: elants_i2c - disable idle mode before updating firmware
  MAINTAINERS: Add maintainer for atmel_mxt_ts
  Input: atmel_mxt_ts - remove warning on zero T44 count
  ...

13 files changed, 84 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index 5f7619c..df8b127 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -64,7 +64,7 @@ Optional properties:
 					pendown-gpio (u32).
 	pendown-gpio			GPIO handle describing the pin the !PENIRQ
 					line is connected to.
-	linux,wakeup			use any event on touchscreen as wakeup event.
+	wakeup-source			use any event on touchscreen as wakeup event.
 
 
 Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
index 7d0a300..8c67a0b 100644
--- a/Documentation/devicetree/bindings/input/cap11xx.txt
+++ b/Documentation/devicetree/bindings/input/cap11xx.txt
@@ -55,5 +55,24 @@ i2c_controller {
 				 <105>,		/* KEY_LEFT */
 				 <109>,		/* KEY_PAGEDOWN */
 				 <104>;		/* KEY_PAGEUP */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usr@0 {
+			label = "cap11xx:green:usr0";
+			reg = <0>;
+		};
+
+		usr@1 {
+			label = "cap11xx:green:usr1";
+			reg = <1>;
+		};
+
+		alive@2 {
+			label = "cap11xx:green:alive";
+			reg = <2>;
+			linux,default_trigger = "heartbeat";
+		};
 	};
 }
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
new file mode 100644
index 0000000..635a3b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -0,0 +1,44 @@
+Cypress I2C Touchpad
+
+Required properties:
+- compatible: must be "cypress,cyapa".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+	binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+	binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+	pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+	&i2c0 {
+		/* ... */
+
+		/* Cypress Gen3 touchpad */
+		touchpad@67 {
+			compatible = "cypress,cyapa";
+			reg = <0x24>;
+			interrupt-parent = <&gpio>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
+			wakeup-source;
+		};
+
+		/* Cypress Gen5 and later touchpad */
+		touchpad@24 {
+			compatible = "cypress,cyapa";
+			reg = <0x24>;
+			interrupt-parent = <&gpio>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
+			wakeup-source;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt
index a765232..8a71038 100644
--- a/Documentation/devicetree/bindings/input/elants_i2c.txt
+++ b/Documentation/devicetree/bindings/input/elants_i2c.txt
@@ -13,6 +13,9 @@ Optional properties:
 - pinctrl-names: should be "default" (see pinctrl binding [1]).
 - pinctrl-0: a phandle pointing to the pin settings for the device (see
   pinctrl binding [1]).
+- reset-gpios: reset gpio the chip is connected to.
+- vcc33-supply: a phandle for the regulator supplying 3.3V power.
+- vccio-supply: a phandle for the regulator supplying IO power.
 
 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 313abef..5b91f5a 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -20,7 +20,7 @@ Optional subnode-properties:
 	  If not specified defaults to <1> == EV_KEY.
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
-	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- wakeup-source: Boolean, button can wake-up the system.
 
 Example nodes:
 
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index 44b7057..072bf75 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -23,7 +23,7 @@ Optional subnode-properties:
 	  If not specified defaults to <1> == EV_KEY.
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
-	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- wakeup-source: Boolean, button can wake-up the system.
 	- linux,can-disable: Boolean, indicates that button is connected
 	  to dedicated (not shared) interrupt which can be disabled to
 	  suppress events from the button.
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
index ead641c..4d86059 100644
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -19,7 +19,7 @@ Required Properties:
 
 Optional Properties:
 - linux,no-autorepeat:	do no enable autorepeat feature.
-- linux,wakeup:		use any event on keypad as wakeup event.
+- wakeup-source:	use any event on keypad as wakeup event.
 - debounce-delay-ms:	debounce interval in milliseconds
 - col-scan-delay-us:	delay, measured in microseconds, that is needed
 			before we can scan keypad after activating column gpio
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
index 7d8cb92..ee62156 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -33,7 +33,7 @@ PROPERTIES
 	Value type: <bool>
 	Definition: don't enable autorepeat feature.
 
-- linux,keypad-wakeup:
+- wakeup-source:
 	Usage: optional
 	Value type: <bool>
 	Definition: use any event on keypad as wakeup event.
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 942d071..863e77f 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -36,9 +36,11 @@ Required Board Specific Properties:
 - pinctrl-0: Should specify pin control groups used for this controller.
 - pinctrl-names: Should contain only one value - "default".
 
+Optional Properties:
+- wakeup-source: use any event on keypad as wakeup event.
+
 Optional Properties specific to linux:
 - linux,keypad-no-autorepeat: do no enable autorepeat feature.
-- linux,keypad-wakeup: use any event on keypad as wakeup event.
 
 
 Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
index 6e55109..8eb240a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -8,6 +8,9 @@ Required properties:
 - touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
 - touchscreen-size-y: vertical resolution of touchscreen (in pixels)
 
+Optional properties:
+- reset-gpio: GPIO connected to the RESET line of the chip
+
 Example:
 
 	i2c@00000000 {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
index 80c37df..e3c27c4 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
@@ -4,12 +4,12 @@ Required properties:
 - compatible: must be "neonode,zforce"
 - reg: I2C address of the chip
 - interrupts: interrupt to which the chip is connected
-- gpios: gpios the chip is connected to
-  first one is the interrupt gpio and second one the reset gpio
+- reset-gpios: reset gpio the chip is connected to
 - x-size: horizontal resolution of touchscreen
 - y-size: vertical resolution of touchscreen
 
 Optional properties:
+- irq-gpios : interrupt gpio the chip is connected to
 - vdd-supply: Regulator controlling the controller supply
 
 Example:
@@ -23,8 +23,8 @@ Example:
 			interrupts = <2 0>;
 			vdd-supply = <&reg_zforce_vdd>;
 
-			gpios = <&gpio5 6 0>, /* INT */
-				<&gpio5 9 0>; /* RST */
+			reset-gpios = <&gpio5 9 0>; /* RST */
+			irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
 
 			x-size = <800>;
 			y-size = <600>;
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 6fcedba..37bf7f1 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -55,7 +55,7 @@ Optional nodes:
  - linux,keymap: the definition can be found in
    bindings/input/matrix-keymap.txt
  - linux,no-autorepeat: do no enable autorepeat feature.
- - linux,wakeup: use any event on keypad as wakeup event.
+ - wakeup-source: use any event on keypad as wakeup event.
 
 Example:
 
@@ -84,7 +84,6 @@ tc35893@44 {
 		keypad,num-columns = <8>;
 		keypad,num-rows = <8>;
 		linux,no-autorepeat;
-		linux,wakeup;
 		linux,keymap = <0x0301006b
 				0x04010066
 				0x06040072
@@ -103,5 +102,6 @@ tc35893@44 {
 				0x01030039
 				0x07060069
 				0x050500d9>;
+		wakeup-source;
 	};
 };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2a85b15..ab1e493 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -55,6 +55,7 @@ cortina	Cortina Systems, Inc.
 cosmic	Cosmic Circuits
 crystalfontz	Crystalfontz America, Inc.
 cubietech	Cubietech, Ltd.
+cypress	Cypress Semiconductor Corporation
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 davicom	DAVICOM Semiconductor, Inc.
 delta	Delta Electronics, Inc.