summaryrefslogtreecommitdiff
path: root/Documentation/dmaengine
diff options
context:
space:
mode:
authorPeter Ujfalusi <peter.ujfalusi@ti.com>2015-12-14 20:47:40 (GMT)
committerVinod Koul <vinod.koul@intel.com>2015-12-18 05:47:26 (GMT)
commita8135d0d79e9d0ad3a4ff494fceeaae838becf38 (patch)
tree3aba1f9650cf172838575013e74ce905c67418fc /Documentation/dmaengine
parent7bd903c5ca47fde5ad52370a47776491813c772e (diff)
downloadlinux-a8135d0d79e9d0ad3a4ff494fceeaae838becf38.tar.xz
dmaengine: core: Introduce new, universal API to request a channel
The two API function can cover most, if not all current APIs used to request a channel. With minimal effort dmaengine drivers, platforms and dmaengine user drivers can be converted to use the two function. struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); To request any channel matching with the requested capabilities, can be used to request channel for memcpy, memset, xor, etc where no hardware synchronization is needed. struct dma_chan *dma_request_chan(struct device *dev, const char *name); To request a slave channel. The dma_request_chan() will try to find the channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode it will use a filter lookup table and retrieves the needed information from the dma_slave_map provided by the DMA drivers. This legacy mode needs changes in platform code, in dmaengine drivers and finally the dmaengine user drivers can be converted: For each dmaengine driver an array of DMA device, slave and the parameter for the filter function needs to be added: static const struct dma_slave_map da830_edma_map[] = { { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, }; This information is going to be needed by the dmaengine driver, so modification to the platform_data is needed, and the driver map should be added to the pdata of the DMA driver: da8xx_edma0_pdata.slave_map = da830_edma_map; da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); The DMA driver then needs to configure the needed device -> filter_fn mapping before it registers with dma_async_device_register() : ecc->dma_slave.filter_map.map = info->slave_map; ecc->dma_slave.filter_map.mapcnt = info->slavecnt; ecc->dma_slave.filter_map.fn = edma_filter_fn; When neither DT or ACPI lookup is available the dma_request_chan() will try to match the requester's device name with the filter_map's list of device names, when a match found it will use the information from the dma_slave_map to get the channel with the dma_get_channel() internal function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Diffstat (limited to 'Documentation/dmaengine')
-rw-r--r--Documentation/dmaengine/client.txt23
1 files changed, 6 insertions, 17 deletions
diff --git a/Documentation/dmaengine/client.txt b/Documentation/dmaengine/client.txt
index 11fb87f..4b04d89 100644
--- a/Documentation/dmaengine/client.txt
+++ b/Documentation/dmaengine/client.txt
@@ -22,25 +22,14 @@ The slave DMA usage consists of following steps:
Channel allocation is slightly different in the slave DMA context,
client drivers typically need a channel from a particular DMA
controller only and even in some cases a specific channel is desired.
- To request a channel dma_request_channel() API is used.
+ To request a channel dma_request_chan() API is used.
Interface:
- struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
- dma_filter_fn filter_fn,
- void *filter_param);
- where dma_filter_fn is defined as:
- typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
-
- The 'filter_fn' parameter is optional, but highly recommended for
- slave and cyclic channels as they typically need to obtain a specific
- DMA channel.
-
- When the optional 'filter_fn' parameter is NULL, dma_request_channel()
- simply returns the first channel that satisfies the capability mask.
-
- Otherwise, the 'filter_fn' routine will be called once for each free
- channel which has a capability in 'mask'. 'filter_fn' is expected to
- return 'true' when the desired DMA channel is found.
+ struct dma_chan *dma_request_chan(struct device *dev, const char *name);
+
+ Which will find and return the 'name' DMA channel associated with the 'dev'
+ device. The association is done via DT, ACPI or board file based
+ dma_slave_map matching table.
A channel allocated via this interface is exclusive to the caller,
until dma_release_channel() is called.