diff options
author | Ernesto Hernández-Novich <emhn@usb.ve> | 2008-04-22 17:45:58 (GMT) |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@infradead.org> | 2008-04-24 17:07:51 (GMT) |
commit | 97275ac514c7f1131f42f8b06e073b144c744e78 (patch) | |
tree | 5f79cdd6007b2b131152c1c7f7ae5ca79aa23698 /Documentation/video4linux/CARDLIST.bttv | |
parent | 76e41e4851e0c8b642e348d8489d7645b8dae21e (diff) | |
download | linux-97275ac514c7f1131f42f8b06e073b144c744e78.tar.xz |
V4L/DVB (7366): Support for a 16-channel bt878 card
I have what looks like a Geovision GV-600 (or 650) card. It has a large
chip in the middle labeled
CONEXANT
FUSION 878A
25878-13
E345881.1
0312 TAIWAN
It has an audio connector coming out from a chip labeled
ATMEL
0242
AT89C2051-24PI
It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18)
...
01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
...
01:0a.0 0400: 109e:036e (rev 11)
Subsystem: 008a:763c
Flags: bus master, medium devsel, latency 64, IRQ 58
Memory at dfffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
01:0a.1 0480: 109e:0878 (rev 11)
Subsystem: 008a:763c
Flags: bus master, medium devsel, latency 64, IRQ 58
Memory at dffff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18
kernel and the latest v4l-dvb drivers, but it did not work at all. The
card has sixteen (16) BNC video inputs, four of them on the board itself
and twelve on three daughter-cards. It has a single bt878 chip, no tuner
and what looks like and audio input. After doing some research I managed
to get only eight channels working by forcing card=125 and those DID NOT
match channels 0-7 on the card, and no audio.
Based on what was working for card=125, I added the card definition
block, added a specific muxsel routine and got the card working fully
with xawtv, where the sixteen channels show up as Composite0 to
Composite15, matching the channel labels in the card and daughter-cards.
I have made no efforts yet to get audio working, but would appreciate
any pointers.
Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'Documentation/video4linux/CARDLIST.bttv')
-rw-r--r-- | Documentation/video4linux/CARDLIST.bttv | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index d97cf7c..17911d0 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -148,3 +148,4 @@ 147 -> VoodooTV 200 (USA) [121a:3000] 148 -> DViCO FusionHDTV 2 [dbc0:d200] 149 -> Typhoon TV-Tuner PCI (50684) +150 -> Geovision GV-600 [008a:763c] |