diff options
author | Paul Gortmaker <paul.gortmaker@windriver.com> | 2013-09-12 14:18:00 (GMT) |
---|---|---|
committer | James Bottomley <JBottomley@Parallels.com> | 2013-12-19 15:39:02 (GMT) |
commit | 1a4049ddfdaa75db7c9927dbc4d991bd73f923a0 (patch) | |
tree | 5e4456d426d8f9731ccf5071af645f5dccb62087 /Documentation | |
parent | 59ab3c93233f4c7aa595d50ddafa952572626664 (diff) | |
download | linux-1a4049ddfdaa75db7c9927dbc4d991bd73f923a0.tar.xz |
[SCSI] aci7xxx_old: delete decade+ obsolete driver
After getting warnings in an allyesconfig build[1] from this
driver, I decided to remind myself just how old it was, and
whether it warranted fixing. In the Kconfig help text, I found:
"This driver will eventually be phased out entirely"
Going back to the history archive, I see the line was added[2]
in Feb 2002, when we moved from v2.4.2.1 ---> v2.4.2.2
So, with over a decade of notification, and multiple major releases
since then, I think we can justify removing this. Currently we have
people wasting time building it during routine testing, and then
wasting more time re-researching the known reported warnings, only to
find that nobody really is willing to integrate the fixes[3] for it.
A quick search didn't seem to indicate any active user base for it.
If someone happens to have a quirky _old_ card that the eleven year
old "new" driver doesn't work with, then it is entirely reasonable
that they stick with a kernel version that predates this removal.
[1] drivers/scsi/aic7xxx_old.c: In function ‘aic7xxx_register’:
drivers/scsi/aic7xxx_old.c:7901:5: warning: case value ‘257’ not in enumerated type ‘ahc_chip’ [-Wswitch]
drivers/scsi/aic7xxx_old.c:7898:5: warning: case value ‘513’ not in enumerated type ‘ahc_chip’ [-Wswitch]
drivers/scsi/aic7xxx_old.c: In function ‘aic7xxx_load_seeprom’:
drivers/scsi/aic7xxx_old.c:8517:5: warning: case value ‘257’ not in enumerated type ‘ahc_chip’ [-Wswitch]
drivers/scsi/aic7xxx_old.c:8510:5: warning: case value ‘513’ not in enumerated type ‘ahc_chip’ [-Wswitch]
[2] http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git commit 44e8778c
[3] https://lkml.org/lkml/2012/10/29/215
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/scsi/00-INDEX | 2 | ||||
-rw-r--r-- | Documentation/scsi/aic7xxx_old.txt | 511 |
2 files changed, 0 insertions, 513 deletions
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index 9b0787f..2044be5 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -42,8 +42,6 @@ aic79xx.txt - Adaptec Ultra320 SCSI host adapters aic7xxx.txt - info on driver for Adaptec controllers -aic7xxx_old.txt - - info on driver for Adaptec controllers, old generation arcmsr_spec.txt - ARECA FIRMWARE SPEC (for IOP331 adapter) dc395x.txt diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt deleted file mode 100644 index ecfc474..0000000 --- a/Documentation/scsi/aic7xxx_old.txt +++ /dev/null @@ -1,511 +0,0 @@ - AIC7xxx Driver for Linux - -Introduction ----------------------------- -The AIC7xxx SCSI driver adds support for Adaptec (http://www.adaptec.com) -SCSI controllers and chipsets. Major portions of the driver and driver -development are shared between both Linux and FreeBSD. Support for the -AIC-7xxx chipsets have been in the default Linux kernel since approximately -linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD -2.1.0 or later. - - Supported cards/chipsets - ---------------------------- - Adaptec Cards - ---------------------------- - AHA-274x - AHA-274xT - AHA-2842 - AHA-2910B - AHA-2920C - AHA-2930 - AHA-2930U - AHA-2930CU - AHA-2930U2 - AHA-2940 - AHA-2940W - AHA-2940U - AHA-2940UW - AHA-2940UW-PRO - AHA-2940AU - AHA-2940U2W - AHA-2940U2 - AHA-2940U2B - AHA-2940U2BOEM - AHA-2944D - AHA-2944WD - AHA-2944UD - AHA-2944UWD - AHA-2950U2 - AHA-2950U2W - AHA-2950U2B - AHA-29160M - AHA-3940 - AHA-3940U - AHA-3940W - AHA-3940UW - AHA-3940AUW - AHA-3940U2W - AHA-3950U2B - AHA-3950U2D - AHA-3960D - AHA-39160M - AHA-3985 - AHA-3985U - AHA-3985W - AHA-3985UW - - Motherboard Chipsets - ---------------------------- - AIC-777x - AIC-785x - AIC-786x - AIC-787x - AIC-788x - AIC-789x - AIC-3860 - - Bus Types - ---------------------------- - W - Wide SCSI, SCSI-3, 16bit bus, 68pin connector, will also support - SCSI-1/SCSI-2 50pin devices, transfer rates up to 20MB/s. - U - Ultra SCSI, transfer rates up to 40MB/s. - U2- Ultra 2 SCSI, transfer rates up to 80MB/s. - D - Differential SCSI. - T - Twin Channel SCSI. Up to 14 SCSI devices. - - AHA-274x - EISA SCSI controller - AHA-284x - VLB SCSI controller - AHA-29xx - PCI SCSI controller - AHA-394x - PCI controllers with two separate SCSI controllers on-board. - AHA-398x - PCI RAID controllers with three separate SCSI controllers - on-board. - - Not Supported Devices - ------------------------------ - Adaptec Cards - ---------------------------- - AHA-2920 (Only the cards that use the Future Domain chipset are not - supported, any 2920 cards based on Adaptec AIC chipsets, - such as the 2920C, are supported) - AAA-13x Raid Adapters - AAA-113x Raid Port Card - - Motherboard Chipsets - ---------------------------- - AIC-7810 - - Bus Types - ---------------------------- - R - Raid Port busses are not supported. - - The hardware RAID devices sold by Adaptec are *NOT* supported by this - driver (and will people please stop emailing me about them, they are - a totally separate beast from the bare SCSI controllers and this driver - cannot be retrofitted in any sane manner to support the hardware RAID - features on those cards - Doug Ledford). - - - People - ------------------------------ - Justin T Gibbs gibbs@plutotech.com - (BSD Driver Author) - Dan Eischen deischen@iworks.InterWorks.org - (Original Linux Driver Co-maintainer) - Dean Gehnert deang@teleport.com - (Original Linux FTP/patch maintainer) - Jess Johnson jester@frenzy.com - (AIC7xxx FAQ author) - Doug Ledford dledford@redhat.com - (Current Linux aic7xxx-5.x.x Driver/Patch/FTP maintainer) - - Special thanks go to John Aycock (aycock@cpsc.ucalgary.ca), the original - author of the driver. John has since retired from the project. Thanks - again for all his work! - - Mailing list - ------------------------------ - There is a mailing list available for users who want to track development - and converse with other users and developers. This list is for both - FreeBSD and Linux support of the AIC7xxx chipsets. - - To subscribe to the AIC7xxx mailing list send mail to the list server, - with "subscribe AIC7xxx" in the body (no Subject: required): - To: majordomo@FreeBSD.ORG - --- - subscribe AIC7xxx - - To unsubscribe from the list, send mail to the list server with: - To: majordomo@FreeBSD.ORG - --- - unsubscribe AIC7xxx - - Send regular messages and replies to: AIC7xxx@FreeBSD.ORG - - Boot Command line options - ------------------------------ - "aic7xxx=no_reset" - Eliminate the SCSI bus reset during startup. - Some SCSI devices need the initial reset that this option disables - in order to work. If you have problems at bootup, please make sure - you aren't using this option. - - "aic7xxx=reverse_scan" - Certain PCI motherboards scan for devices at - bootup by scanning from the highest numbered PCI device to the - lowest numbered PCI device, others do just the opposite and scan - from lowest to highest numbered PCI device. There is no reliable - way to autodetect this ordering. So, we default to the most common - order, which is lowest to highest. Then, in case your motherboard - scans from highest to lowest, we have this option. If your BIOS - finds the drives on controller A before controller B but the linux - kernel finds your drives on controller B before A, then you should - use this option. - - "aic7xxx=extended" - Force the driver to detect extended drive translation - on your controller. This helps those people who have cards without - a SEEPROM make sure that linux and all other operating systems think - the same way about your hard drives. - - "aic7xxx=scbram" - Some cards have external SCB RAM that can be used to - give the card more hardware SCB slots. This allows the driver to use - that SCB RAM. Without this option, the driver won't touch the SCB - RAM because it is known to cause problems on a few cards out there - (such as 3985 class cards). - - "aic7xxx=irq_trigger:x" - Replace x with either 0 or 1 to force the kernel - to use the correct IRQ type for your card. This only applies to EISA - based controllers. On these controllers, 0 is for Edge triggered - interrupts, and 1 is for Level triggered interrupts. If you aren't - sure or don't know which IRQ trigger type your EISA card uses, then - let the kernel autodetect the trigger type. - - "aic7xxx=verbose" - This option can be used in one of two ways. If you - simply specify aic7xxx=verbose, then the kernel will automatically - pick the default set of verbose messages for you to see. - Alternatively, you can specify the command as - "aic7xxx=verbose:0xXXXX" where the X entries are replaced with - hexadecimal digits. This option is a bit field type option. For - a full listing of the available options, search for the - #define VERBOSE_xxxxxx lines in the aic7xxx.c file. If you want - verbose messages, then it is recommended that you simply use the - aic7xxx=verbose variant of this command. - - "aic7xxx=pci_parity:x" - This option controls whether or not the driver - enables PCI parity error checking on the PCI bus. By default, this - checking is disabled. To enable the checks, simply specify pci_parity - with no value afterwords. To reverse the parity from even to odd, - supply any number other than 0 or 255. In short: - pci_parity - Even parity checking (even is the normal PCI parity) - pci_parity:x - Where x > 0, Odd parity checking - pci_parity:0 - No check (default) - NOTE: In order to get Even PCI parity checking, you must use the - version of the option that does not include the : and a number at - the end (unless you want to enter exactly 2^32 - 1 as the number). - - "aic7xxx=no_probe" - This option will disable the probing for any VLB - based 2842 controllers and any EISA based controllers. This is - needed on certain newer motherboards where the normal EISA I/O ranges - have been claimed by other PCI devices. Probing on those machines - will often result in the machine crashing or spontaneously rebooting - during startup. Examples of machines that need this are the - Dell PowerEdge 6300 machines. - - "aic7xxx=seltime:2" - This option controls how long the card waits - during a device selection sequence for the device to respond. - The original SCSI spec says that this "should be" 256ms. This - is generally not required with modern devices. However, some - very old SCSI I devices need the full 256ms. Most modern devices - can run fine with only 64ms. The default for this option is - 64ms. If you need to change this option, then use the following - table to set the proper value in the example above: - 0 - 256ms - 1 - 128ms - 2 - 64ms - 3 - 32ms - - "aic7xxx=panic_on_abort" - This option is for debugging and will cause - the driver to panic the linux kernel and freeze the system the first - time the drivers abort or reset routines are called. This is most - helpful when some problem causes infinite reset loops that scroll too - fast to see. By using this option, you can write down what the errors - actually are and send that information to me so it can be fixed. - - "aic7xxx=dump_card" - This option will print out the *entire* set of - configuration registers on the card during the init sequence. This - is a debugging aid used to see exactly what state the card is in - when we finally finish our initialization routines. If you don't - have documentation on the chipsets, this will do you absolutely - no good unless you are simply trying to write all the information - down in order to send it to me. - - "aic7xxx=dump_sequencer" - This is the same as the above options except - that instead of dumping the register contents on the card, this - option dumps the contents of the sequencer program RAM. This gives - the ability to verify that the instructions downloaded to the - card's sequencer are indeed what they are supposed to be. Again, - unless you have documentation to tell you how to interpret these - numbers, then it is totally useless. - - "aic7xxx=override_term:0xffffffff" - This option is used to force the - termination on your SCSI controllers to a particular setting. This - is a bit mask variable that applies for up to 8 aic7xxx SCSI channels. - Each channel gets 4 bits, divided as follows: - bit 3 2 1 0 - | | | Enable/Disable Single Ended Low Byte Termination - | | En/Disable Single Ended High Byte Termination - | En/Disable Low Byte LVD Termination - En/Disable High Byte LVD Termination - - The upper 2 bits that deal with LVD termination only apply to Ultra2 - controllers. Furthermore, due to the current Ultra2 controller - designs, these bits are tied together such that setting either bit - enables both low and high byte LVD termination. It is not possible - to only set high or low byte LVD termination in this manner. This is - an artifact of the BIOS definition on Ultra2 controllers. For other - controllers, the only important bits are the two lowest bits. Setting - the higher bits on non-Ultra2 controllers has no effect. A few - examples of how to use this option: - - Enable low and high byte termination on a non-ultra2 controller that - is the first aic7xxx controller (the correct bits are 0011), - aic7xxx=override_term:0x3 - - Enable all termination on the third aic7xxx controller, high byte - termination on the second aic7xxx controller, and low and high byte - SE termination on the first aic7xxx controller - (bits are 1111 0010 0011), - aic7xxx=override_term:0xf23 - - No attempt has been made to make this option non-cryptic. It really - shouldn't be used except in dire circumstances, and if that happens, - I'm probably going to be telling you what to set this to anyway :) - - "aic7xxx=stpwlev:0xffffffff" - This option is used to control the STPWLEV - bit in the DEVCONFIG PCI register. Currently, this is one of the - very few registers that we have absolutely *no* way of detecting - what the variable should be. It depends entirely on how the chipset - and external terminators were coupled by the card/motherboard maker. - Further, a chip reset (at power up) always sets this bit to 0. If - there is no BIOS to run on the chipset/card (such as with a 2910C - or a motherboard controller with the BIOS totally disabled) then - the variable may not get set properly. Of course, if the proper - setting was 0, then that's what it would be after the reset, but if - the proper setting is actually 1.....you get the picture. Now, since - we can't detect this at all, I've added this option to force the - setting. If you have a BIOS on your controller then you should never - need to use this option. However, if you are having lots of SCSI - reset problems and can't seem to get them knocked out, this may help. - - Here's a test to know for certain if you need this option. Make - a boot floppy that you can use to boot your computer up and that - will detect the aic7xxx controller. Next, power down your computer. - While it's down, unplug all SCSI cables from your Adaptec SCSI - controller. Boot the system back up to the Adaptec EZ-SCSI BIOS - and then make sure that termination is enabled on your adapter (if - you have an Adaptec BIOS of course). Next, boot up the floppy you - made and wait for it to detect the aic7xxx controller. If the kernel - finds the controller fine, says scsi : x hosts and then tries to - detect your devices like normal, up to the point where it fails to - mount your root file system and panics, then you're fine. If, on - the other hand, the system goes into an infinite reset loop, then - you need to use this option and/or the previous option to force the - proper termination settings on your controller. If this happens, - then you next need to figure out what your settings should be. - - To find the correct settings, power your machine back down, connect - back up the SCSI cables, and boot back into your machine like normal. - However, boot with the aic7xxx=verbose:0x39 option. Record the - initial DEVCONFIG values for each of your aic7xxx controllers as - they are listed, and also record what the machine is detecting as - the proper termination on your controllers. NOTE: the order in - which the initial DEVCONFIG values are printed out is not guaranteed - to be the same order as the SCSI controllers are registered. The - above option and this option both work on the order of the SCSI - controllers as they are registered, so make sure you match the right - DEVCONFIG values with the right controllers if you have more than - one aic7xxx controller. - - Once you have the detected termination settings and the initial - DEVCONFIG values for each controller, then figure out what the - termination on each of the controllers *should* be. Hopefully, that - part is correct, but it could possibly be wrong if there is - bogus cable detection logic on your controller or something similar. - If all the controllers have the correct termination settings, then - don't set the aic7xxx=override_term variable at all, leave it alone. - Next, on any controllers that go into an infinite reset loop when - you unplug all the SCSI cables, get the starting DEVCONFIG value. - If the initial DEVCONFIG value is divisible by 2, then the correct - setting for that controller is 0. If it's an odd number, then - the correct setting for that controller is 1. For any other - controllers that didn't have an infinite reset problem, then reverse - the above options. If DEVCONFIG was even, then the correct setting - is 1, if not then the correct setting is 0. - - Now that you know what the correct setting was for each controller, - we need to encode that into the aic7xxx=stpwlev:0x... variable. - This variable is a bit field encoded variable. Bit 0 is for the first - aic7xxx controller, bit 1 for the next, etc. Put all these bits - together and you get a number. For example, if the third aic7xxx - needed a 1, but the second and first both needed a 0, then the bits - would be 100 in binary. This then translates to 0x04. You would - therefore set aic7xxx=stpwlev:0x04. This is fairly standard binary - to hexadecimal conversions here. If you aren't up to speed on the - binary->hex conversion then send an email to the aic7xxx mailing - list and someone can help you out. - - "aic7xxx=tag_info:{{8,8..},{8,8..},..}" - This option is used to disable - or enable Tagged Command Queueing (TCQ) on specific devices. As of - driver version 5.1.11, TCQ is now either on or off by default - according to the setting you choose during the make config process. - In order to en/disable TCQ for certain devices at boot time, a user - may use this boot param. The driver will then parse this message out - and en/disable the specific device entries that are present based upon - the value given. The param line is parsed in the following manner: - - { - first instance indicates the start of this parameter values - second instance is the start of entries for a particular - device entry - } - end the entries for a particular host adapter, or end the entire - set of parameter entries - , - move to next entry. Inside of a set of device entries, this - moves us to the next device on the list. Outside of device - entries, this moves us to the next host adapter - . - Same effect as , but is safe to use with insmod. - x - the number to enter into the array at this position. - 0 = Enable tagged queueing on this device and use the default - queue depth - 1-254 = Enable tagged queueing on this device and use this - number as the queue depth - 255 = Disable tagged queueing on this device. - Note: anything above 32 for an actual queue depth is wasteful - and not recommended. - - A few examples of how this can be used: - - tag_info:{{8,12,,0,,255,4}} - This line will only effect the first aic7xxx card registered. It - will set scsi id 0 to a queue depth of 8, id 1 to 12, leave id 2 - at the default, set id 3 to tagged queueing enabled and use the - default queue depth, id 4 default, id 5 disabled, and id 6 to 4. - Any not specified entries stay at the default value, repeated - commas with no value specified will simply increment to the next id - without changing anything for the missing values. - - tag_info:{,,,{,,,255}} - First, second, and third adapters at default values. Fourth - adapter, id 3 is disabled. Notice that leading commas simply - increment what the first number effects, and there are no need - for trailing commas. When you close out an adapter, or the - entire entry, anything not explicitly set stays at the default - value. - - A final note on this option. The scanner I used for this isn't - perfect or highly robust. If you mess the line up, the worst that - should happen is that the line will get ignored. If you don't - close out the entire entry with the final bracket, then any other - aic7xxx options after this will get ignored. So, in general, be - sure of what you are entering, and after you have it right, just - add it to the lilo.conf file so there won't be any mistakes. As - a means of checking this parser, the entire tag_info array for - each card is now printed out in the /proc/scsi/aic7xxx/x file. You - can use that to verify that your options were parsed correctly. - - Boot command line options may be combined to form the proper set of options - a user might need. For example, the following is valid: - - aic7xxx=verbose,extended,irq_trigger:1 - - The only requirement is that individual options be separated by a comma or - a period on the command line. - - Module Loading command options - ------------------------------ - When loading the aic7xxx driver as a module, the exact same options are - available to the user. However, the syntax to specify the options changes - slightly. For insmod, you need to wrap the aic7xxx= argument in quotes - and replace all ',' with '.'. So, for example, a valid insmod line - would be: - - insmod aic7xxx aic7xxx='verbose.irq_trigger:1.extended' - - This line should result in the *exact* same behaviour as if you typed - it in at the lilo prompt and the driver was compiled into the kernel - instead of being a module. The reason for the single quote is so that - the shell won't try to interpret anything in the line, such as {. - Insmod assumes any options starting with a letter instead of a number - is a character string (which is what we want) and by switching all of - the commas to periods, insmod won't interpret this as more than one - string and write junk into our binary image. I consider it a bug in - the insmod program that even if you wrap your string in quotes (quotes - that pass the shell mind you and that insmod sees) it still treats - a comma inside of those quotes as starting a new variable, resulting - in memory scribbles if you don't switch the commas to periods. - - - Kernel Compile options - ------------------------------ - The various kernel compile time options for this driver are now fairly - well documented in the file drivers/scsi/Kconfig. In order to - see this documentation, you need to use one of the advanced configuration - programs (menuconfig and xconfig). If you are using the "make menuconfig" - method of configuring your kernel, then you would simply highlight the - option in question and hit the ? key. If you are using the "make xconfig" - method of configuring your kernel, then simply click on the help button - next to the option you have questions about. The help information from - the Configure.help file will then get automatically displayed. - - /proc support - ------------------------------ - The /proc support for the AIC7xxx can be found in the /proc/scsi/aic7xxx/ - directory. That directory contains a file for each SCSI controller in - the system. Each file presents the current configuration and transfer - statistics (enabled with #define in aic7xxx.c) for each controller. - - Thanks to Michael Neuffer for his upper-level SCSI help, and - Matthew Jacob for statistics support. - - Debugging the driver - ------------------------------ - Should you have problems with this driver, and would like some help in - getting them solved, there are a couple debugging items built into - the driver to facilitate getting the needed information from the system. - In general, I need a complete description of the problem, with as many - logs as possible concerning what happens. To help with this, there is - a command option aic7xxx=panic_on_abort. This option, when set, forces - the driver to panic the kernel on the first SCSI abort issued by the - mid level SCSI code. If your system is going to reset loops and you - can't read the screen, then this is what you need. Not only will it - stop the system, but it also prints out a large amount of state - information in the process. Second, if you specify the option - "aic7xxx=verbose:0x1ffff", the system will print out *SOOOO* much - information as it runs that you won't be able to see anything. - However, this can actually be very useful if your machine simply - locks up when trying to boot, since it will pin-point what was last - happening (in regards to the aic7xxx driver) immediately prior to - the lockup. This is really only useful if your machine simply can - not boot up successfully. If you can get your machine to run, then - this will produce far too much information. - - FTP sites - ------------------------------ - ftp://ftp.redhat.com/pub/aic/ - - Out of date. I used to keep stuff here, but too many people - complained about having a hard time getting into Red Hat's ftp - server. So use the web site below instead. - ftp://ftp.pcnet.com/users/eischen/Linux/ - - Dan Eischen's driver distribution area - ftp://ekf2.vsb.cz/pub/linux/kernel/aic7xxx/ftp.teleport.com/ - - European Linux mirror of Teleport site - - Web sites - ------------------------------ - http://people.redhat.com/dledford/ - - My web site, also the primary aic7xxx site with several related - pages. - -Dean W. Gehnert -deang@teleport.com - -$Revision: 3.0 $ - -Modified by Doug Ledford 1998-2000 - |