Merge tag 'staging-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.5-rc1.

  Lots of cleanups and fixes here, not as many as some releases, but
  800+ isn't that bad.  Full details in the shortlog.  All of these have
  been in linux-next for a while"

* tag 'staging-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (843 commits)
  Revert "arm64: dts: Add dts files to enable ION on Hi6220 SoC."
  staging: gdm724x: constify tty_port_operations structs
  staging: gdm72xx: add userspace data struct
  staging: gdm72xx: Replace timeval with ktime_t
  iio: adc: ina2xx: Fix incorrect report of data endianness to userspace.
  iio: light: us5182d: Refactor read_raw function
  iio: light: us5182d: Add interrupt support and events
  iio: light: us5182d: Fix enable status inconcistency
  iio: Make IIO value formating function globally available.
  staging: emxx_udc: use list_first_entry_or_null()
  staging/emxx_udc: fix 64-bit warnings
  STAGING: COMEDI: Using kernel types in plx9080.h
  STAGING: COMEDI: Added spaces around binary operators in plx9080.h
  STAGING: COMEDI: Fixed format of comments in plx9080.h
  staging: comedi: comedilib.h: Coding style warning fix for block comments
  staging: comedi: s526: add macros for counter control reg values
  staging: comedi: s526: replace counter mode bitfield struct
  staging: comedi: check for more errors for zero-length write
  staging: comedi: simplify returned errors for comedi_write()
  staging: comedi: return error on "write" if no command set up
  ...

15 files changed, 324 insertions, 12 deletions

diff --git a/Documentation/ABI/testing/configfs-iio b/Documentation/ABI/testing/configfs-iio
new file mode 100644
index 0000000..2483756
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-iio
@@ -0,0 +1,21 @@
+What:		/config/iio
+Date:		October 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This represents Industrial IO configuration entry point
+		directory. It contains sub-groups corresponding to IIO
+		objects.
+
+What:		/config/iio/triggers
+Date:		October 2015
+KernelVersion:	4.4
+Description:
+		Industrial IO software triggers directory.
+
+What:		/config/iio/triggers/hrtimers
+Date:		October 2015
+KernelVersion:	4.4
+Description:
+		High resolution timers directory. Creating a directory here
+		will result in creating a hrtimer trigger in the IIO subsystem.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
new file mode 100644
index 0000000..8916f7e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
@@ -0,0 +1,24 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_allow_async_readout
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		By default (value '0'), the capture thread checks for the Conversion
+		Ready Flag to being set prior to committing a new value to the sample
+		buffer. This synchronizes the in-chip conversion rate with the
+		in-driver readout rate at the cost of an additional register read.
+
+		Writing '1' will remove the polling for the Conversion Ready Flags to
+		save the additional i2c transaction, which will improve the bandwidth
+		available for reading data. However, samples can be occasionally skipped
+		or repeated, depending on the beat between the capture and conversion
+		rates.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value of the shunt resistor may be known only at runtime fom an
+		eeprom content read by a client application. This attribute allows to
+		set its value in ohms.
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index c50cf13..f6fec95 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -20,6 +20,7 @@ adi,adt7476		+/-1C TDM Extended Temp Range I.C
 adi,adt7490		+/-1C TDM Extended Temp Range I.C
 adi,adxl345		Three-Axis Digital Accelerometer
 adi,adxl346		Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
+ams,iaq-core		AMS iAQ-Core VOC Sensor
 at,24c08		i2c serial eeprom  (24cxx)
 atmel,24c00		i2c serial eeprom  (24cxx)
 atmel,24c01		i2c serial eeprom  (24cxx)
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
index e3c3746..3c10e85 100644
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -7,13 +7,18 @@ Required properties:
     * "fsl,mma8453"
     * "fsl,mma8652"
     * "fsl,mma8653"
+
   - reg: the I2C address of the chip
 
 Optional properties:
 
   - interrupt-parent: should be the phandle for the interrupt controller
+
   - interrupts: interrupt mapping for GPIO IRQ
 
+  - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
+		     interrupt line in use.
+
 Example:
 
 	mma8453fc@1d {
@@ -21,4 +26,5 @@ Example:
 		reg = <0x1d>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <5 0>;
+		interrupt-names = "INT2";
 	};
diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
new file mode 100644
index 0000000..5c184b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
@@ -0,0 +1,22 @@
+Freescale imx7d ADC bindings
+
+The devicetree bindings are for the ADC driver written for
+imx7d SoC.
+
+Required properties:
+- compatible: Should be "fsl,imx7d-adc"
+- reg: Offset and length of the register set for the ADC device
+- interrupts: The interrupt number for the ADC device
+- clocks: The root clock of the ADC controller
+- clock-names: Must contain "adc", matching entry in the clocks property
+- vref-supply: The regulator supply ADC reference voltage
+
+Example:
+adc1: adc@30610000 {
+	compatible = "fsl,imx7d-adc";
+	reg = <0x30610000 0x10000>;
+	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+	clock-names = "adc";
+	vref-supply = <&reg_vcc_3v3_mcu>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
index 2a1f3af..bcd3ac8 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
@@ -10,16 +10,28 @@ must be specified.
 Required properties:
 	- compatible:  	Must be one of the following, depending on the
 			model:
-				"mcp3001"
-				"mcp3002"
-				"mcp3004"
-				"mcp3008"
-				"mcp3201"
-				"mcp3202"
-				"mcp3204"
-				"mcp3208"
-				"mcp3301"
+				"mcp3001" (DEPRECATED)
+				"mcp3002" (DEPRECATED)
+				"mcp3004" (DEPRECATED)
+				"mcp3008" (DEPRECATED)
+				"mcp3201" (DEPRECATED)
+				"mcp3202" (DEPRECATED)
+				"mcp3204" (DEPRECATED)
+				"mcp3208" (DEPRECATED)
+				"mcp3301" (DEPRECATED)
 
+				"microchip,mcp3001"
+				"microchip,mcp3002"
+				"microchip,mcp3004"
+				"microchip,mcp3008"
+				"microchip,mcp3201"
+				"microchip,mcp3202"
+				"microchip,mcp3204"
+				"microchip,mcp3208"
+				"microchip,mcp3301"
+
+			NOTE: The use of the compatibles with no vendor prefix
+			is deprecated and only listed because old DT use them.
 
 Examples:
 spi_controller {
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
index 333139c..dcae4cc 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
@@ -1,7 +1,8 @@
-* Microchip mcp3422/3/4/6/7/8 chip family (ADC)
+* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC)
 
 Required properties:
  - compatible: Should be
+	"microchip,mcp3421" or
 	"microchip,mcp3422" or
 	"microchip,mcp3423" or
 	"microchip,mcp3424" or
diff --git a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
new file mode 100644
index 0000000..4bb9a86
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
@@ -0,0 +1,48 @@
+* Palmas general purpose ADC IP block devicetree bindings
+
+Channels list:
+	0 battery type
+	1 battery temp NTC (optional current source)
+	2 GP
+	3 temp (with ext. diode, optional current source)
+	4 GP
+	5 GP
+	6 VBAT_SENSE
+	7 VCC_SENSE
+	8 Backup Battery voltage
+	9 external charger (VCHG)
+	10 VBUS
+	11 DC-DC current probe (how does this work?)
+	12 internal die temp
+	13 internal die temp
+	14 USB ID pin voltage
+	15 test network
+
+Required properties:
+- compatible : Must be "ti,palmas-gpadc".
+- #io-channel-cells: Should be set to <1>.
+
+Optional sub-nodes:
+ti,channel0-current-microamp: Channel 0 current in uA.
+	Values are rounded to derive 0uA, 5uA, 15uA, 20uA.
+ti,channel3-current-microamp: Channel 3 current in uA.
+	Values are rounded to derive 0uA, 10uA, 400uA, 800uA.
+ti,enable-extended-delay: Enable extended delay.
+
+Example:
+
+pmic {
+	compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+	...
+	gpadc {
+		compatible = "ti,palmas-gpadc";
+		interrupts = <18 0
+			      16 0
+			      17 0>;
+		#io-channel-cells = <1>;
+		ti,channel0-current-microamp = <5>;
+		ti,channel3-current-microamp = <10>;
+		};
+	};
+	...
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
index 15ca6b4..daa2b2c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
@@ -1,7 +1,7 @@
-* Texas Instruments' ADC128S052 and ADC122S021 ADC chip
+* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip
 
 Required properties:
- - compatible: Should be "ti,adc128s052" or "ti,adc122s021"
+ - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021"
  - reg: spi chip select number for the device
  - vref-supply: The regulator supply for ADC reference voltage
 
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt
new file mode 100644
index 0000000..a02337d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt
@@ -0,0 +1,20 @@
+* Texas Instruments' ADS8684 and ADS8688 ADC chip
+
+Required properties:
+ - compatible: Should be "ti,ads8684" or "ti,ads8688"
+ - reg: spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+adc@0 {
+	compatible = "ti,ads8688";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+	spi-max-frequency = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
new file mode 100644
index 0000000..f6fbac6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -0,0 +1,21 @@
+Maxim MAX30100 heart rate and pulse oximeter sensor
+
+* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf
+
+Required properties:
+  - compatible: must be "maxim,max30100"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic
+  interrupt client node bindings.
+
+Example:
+
+max30100@057 {
+	compatible = "maxim,max30100";
+	reg = <57>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};
diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt
index 6f0a530..a619799 100644
--- a/Documentation/devicetree/bindings/iio/light/us5182d.txt
+++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt
@@ -7,13 +7,24 @@ Required properties:
 Optional properties:
 - upisemi,glass-coef: glass attenuation factor - compensation factor of
                       resolution 1000 for material transmittance.
+
 - upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc
                     counts) corresponding to every scale.
+
 - upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4
                            fractional bits - Q4.4) applied when light > threshold
+
 - upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4
                            fractional bits - Q4.4) applied when light < threshold
 
+- upisemi,continuous: This chip has two power modes: one-shot (chip takes one
+                      measurement and then shuts itself down) and continuous (
+                      chip takes continuous measurements). The one-shot mode is
+                      more power-friendly but the continuous mode may be more
+                      reliable. If this property is specified the continuous
+                      mode will be used instead of the default one-shot one for
+                      raw reads.
+
 If the optional properties are not specified these factors will default to the
 values in the below example.
 The glass-coef defaults to no compensation for the covering material.
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index d3ccdb1..d4b87cc 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -36,6 +36,7 @@ Accelerometers:
 - st,lsm303dlm-accel
 - st,lsm330-accel
 - st,lsm303agr-accel
+- st,lis2dh12-accel
 
 Gyroscopes:
 - st,l3g4200d-gyro
diff --git a/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt b/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt
new file mode 100644
index 0000000..c59e27c
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt
@@ -0,0 +1,31 @@
+Hi6220 SoC ION
+===================================================================
+Required properties:
+- compatible : "hisilicon,hi6220-ion"
+- list of the ION heaps
+	- heap name : maybe heap_sys_user@0
+	- heap id   : id should be unique in the system.
+	- heap base : base ddr address of the heap,0 means that
+	it is dynamic.
+	- heap size : memory size and 0 means it is dynamic.
+	- heap type : the heap type of the heap, please also
+	see the define in ion.h(drivers/staging/android/uapi/ion.h)
+-------------------------------------------------------------------
+Example:
+	hi6220-ion {
+		compatible = "hisilicon,hi6220-ion";
+		heap_sys_user@0 {
+			heap-name = "sys_user";
+			heap-id   = <0x0>;
+			heap-base = <0x0>;
+			heap-size = <0x0>;
+			heap-type = "ion_system";
+		};
+		heap_sys_contig@0 {
+			heap-name = "sys_contig";
+			heap-id   = <0x1>;
+			heap-base = <0x0>;
+			heap-size = <0x0>;
+			heap-type = "ion_system_contig";
+		};
+	};
diff --git a/Documentation/iio/iio_configfs.txt b/Documentation/iio/iio_configfs.txt
new file mode 100644
index 0000000..f0add35
--- /dev/null
+++ b/Documentation/iio/iio_configfs.txt
@@ -0,0 +1,93 @@
+Industrial IIO configfs support
+
+1. Overview
+
+Configfs is a filesystem-based manager of kernel objects. IIO uses some
+objects that could be easily configured using configfs (e.g.: devices,
+triggers).
+
+See Documentation/filesystems/configfs/configfs.txt for more information
+about how configfs works.
+
+2. Usage
+
+In order to use configfs support in IIO we need to select it at compile
+time via CONFIG_IIO_CONFIGFS config option.
+
+Then, mount the configfs filesystem (usually under /config directory):
+
+$ mkdir /config
+$ mount -t configfs none /config
+
+At this point, all default IIO groups will be created and can be accessed
+under /config/iio. Next chapters will describe available IIO configuration
+objects.
+
+3. Software triggers
+
+One of the IIO default configfs groups is the "triggers" group. It is
+automagically accessible when the configfs is mounted and can be found
+under /config/iio/triggers.
+
+IIO software triggers implementation offers support for creating multiple
+trigger types. A new trigger type is usually implemented as a separate
+kernel module following the interface in include/linux/iio/sw_trigger.h:
+
+/*
+ * drivers/iio/trigger/iio-trig-sample.c
+ * sample kernel module implementing a new trigger type
+ */
+#include <linux/iio/sw_trigger.h>
+
+
+static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
+{
+	/*
+	 * This allocates and registers an IIO trigger plus other
+	 * trigger type specific initialization.
+	 */
+}
+
+static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
+{
+	/*
+	 * This undoes the actions in iio_trig_sample_probe
+	 */
+}
+
+static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
+	.probe		= iio_trig_sample_probe,
+	.remove		= iio_trig_sample_remove,
+};
+
+static struct iio_sw_trigger_type iio_trig_sample = {
+	.name = "trig-sample",
+	.owner = THIS_MODULE,
+	.ops = &iio_trig_sample_ops,
+};
+
+module_iio_sw_trigger_driver(iio_trig_sample);
+
+Each trigger type has its own directory under /config/iio/triggers. Loading
+iio-trig-sample module will create 'trig-sample' trigger type directory
+/config/iio/triggers/trig-sample.
+
+We support the following interrupt sources (trigger types):
+	* hrtimer, uses high resolution timers as interrupt source
+
+3.1 Hrtimer triggers creation and destruction
+
+Loading iio-trig-hrtimer module will register hrtimer trigger types allowing
+users to create hrtimer triggers under /config/iio/triggers/hrtimer.
+
+e.g:
+
+$ mkdir /config/triggers/hrtimer/instance1
+$ rmdir /config/triggers/hrtimer/instance1
+
+Each trigger can have one or more attributes specific to the trigger type.
+
+3.2 "hrtimer" trigger types attributes
+
+"hrtimer" trigger type doesn't have any configurable attribute from /config dir.
+It does introduce the sampling_frequency attribute to trigger directory.