Merge tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "No framework updates for the SPI API this time around aside from one
  small fix, just driver improvments.  Some highlights include:

   - New driver support for CSR USP, Mikrotik RB4xx and Zynq GQSPI
     controllers.

   - Modernisation of the OMAP McSPI controller driver, moving it to
     current APIs to enable support for a wider range of client drivers.

   - DMA support for the bcm2835 controller"

* tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (60 commits)
  spi: zynq: Remove execute bit
  spi: atmel: add support to FIFOs
  spi: atmel: update DT bindings documentation
  spi: spi-fsl-dspi: Update DT binding documentation
  spi: pxa2xx: Constify ACPI device ids
  spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controller
  spi: zynq: Add DT bindings documentation for Zynq Ultrascale+ MPSoC GQSPI controller
  spi: fsl-dspi: Use pinctrl PM helpers
  spi: davinci: change the lower limit of pre-scale divider to 1
  spi: spi-fsl-dspi: Change the way of increasing spi_message->actual_length
  spi: spi-fsl-dspi: Enable TCF interrupt mode support
  spi: atmel: add support for the internal chip-select of the spi controller
  spi: spi-pxa2xx: remove legacy PXA DMA bits
  spi: pxa2xx: Make LPSS SPI general register optional
  spi: pxa2xx: Prepare for new Intel LPSS SPI type
  spi: pxa2xx: Differentiate Intel LPSS types
  spi: restore rx/tx_buf in case of unset CONFIG_HAS_DMA
  spi: rspi: Re-do the returning value of qspi_transfer_out_in
  spi: rspi: modify the name of "qspi_trigger_transfer_out_int" function
  spi: orion: Fix extended baud rates for each Armada SoCs
  ...

7 files changed, 68 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/spi/spi-ath79.txt b/Documentation/devicetree/bindings/spi/spi-ath79.txt
new file mode 100644
index 0000000..f1ad9c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-ath79.txt
@@ -0,0 +1,24 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller
+
+Required properties:
+- compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
+- reg: Base address and size of the controllers memory area
+- clocks: phandle to the AHB clock.
+- clock-names: has to be "ahb".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@1F000000 {
+		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+		reg = <0x1F000000 0x10>;
+
+		clocks = <&pll 2>;
+		clock-names = "ahb";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index 70af78a..fa77f87 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,7 +1,7 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
index 50c3a3d..98bc698 100644
--- a/Documentation/devicetree/bindings/spi/spi-orion.txt
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -1,7 +1,13 @@
 Marvell Orion SPI device
 
 Required properties:
-- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi".
+- compatible : should be on of the following:
+    - "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs
+    - "marvell,armada-370-spi", for the Armada 370 SoCs
+    - "marvell,armada-375-spi", for the Armada 375 SoCs
+    - "marvell,armada-380-spi", for the Armada 38x SoCs
+    - "marvell,armada-390-spi", for the Armada 39x SoCs
+    - "marvell,armada-xp-spi", for the Armada XP SoCs
 - reg : offset and length of the register set for the device
 - cell-index : Which of multiple SPI controllers is this.
 Optional properties:
diff --git a/Documentation/devicetree/bindings/spi/spi-sirf.txt b/Documentation/devicetree/bindings/spi/spi-sirf.txt
index 4c7adb8f..ddd78ff 100644
--- a/Documentation/devicetree/bindings/spi/spi-sirf.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sirf.txt
@@ -1,7 +1,8 @@
 * CSR SiRFprimaII Serial Peripheral Interface
 
 Required properties:
-- compatible : Should be "sirf,prima2-spi"
+- compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp"
+               or "sirf,atlas7-usp"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI interrupt
 - resets: phandle to the reset controller asserting this device in
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
new file mode 100644
index 0000000..c8f50e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
@@ -0,0 +1,26 @@
+Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
+-------------------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "xlnx,zynqmp-qspi-1.0".
+- reg			: Physical base address and size of GQSPI registers map.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- interrupt-parent	: Must be core interrupt controller.
+- clock-names		: List of input clock names - "ref_clk", "pclk"
+			  (See clock bindings for details).
+- clocks		: Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs		: Number of chip selects used.
+
+Example:
+	qspi: spi@ff0f0000 {
+		compatible = "xlnx,zynqmp-qspi-1.0";
+		clock-names = "ref_clk", "pclk";
+		clocks = <&misc_clk &misc_clk>;
+		interrupts = <0 15 4>;
+		interrupt-parent = <&gic>;
+		num-cs = <1>;
+		reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>;
+	};
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 4f8184d..fb588b3 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -4,11 +4,16 @@ Required properties:
 - compatible : should be "atmel,at91rm9200-spi".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
-- cs-gpios: chipselects
+- cs-gpios: chipselects (optional for SPI controller version >= 2 with the
+  Chip Select Active After Transfer feature).
 - clock-names: tuple listing input clock names.
 	Required elements: "spi_clk"
 - clocks: phandles to input clocks.
 
+Optional properties:
+- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
+  capable SPI controllers.
+
 Example:
 
 spi1: spi@fffcc000 {
@@ -20,6 +25,7 @@ spi1: spi@fffcc000 {
 	clocks = <&spi1_clk>;
 	clock-names = "spi_clk";
 	cs-gpios = <&pioB 3 0>;
+	atmel,fifo-size = <32>;
 	status = "okay";
 
 	mmc-slot@0 {
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
index 22ed679..4d1673c 100644
--- a/Documentation/devicetree/bindings/spi/spi_pl022.txt
+++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt
@@ -4,9 +4,9 @@ Required properties:
 - compatible : "arm,pl022", "arm,primecell"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
+- num-cs : total number of chipselects
 
 Optional properties:
-- num-cs : total number of chipselects
 - cs-gpios : should specify GPIOs used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.