Merge tag 'v4.5-rc3' into patchwork

Linux 4.5-rc3

* tag 'v4.5-rc3': (644 commits)
  Linux 4.5-rc3
  epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
  radix-tree: fix oops after radix_tree_iter_retry
  MAINTAINERS: trim the file triggers for ABI/API
  dax: dirty inode only if required
  thp: make deferred_split_scan() work again
  mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
  ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
  um: asm/page.h: remove the pte_high member from struct pte_t
  mm, hugetlb: don't require CMA for runtime gigantic pages
  mm/hugetlb: fix gigantic page initialization/allocation
  mm: downgrade VM_BUG in isolate_lru_page() to warning
  mempolicy: do not try to queue pages from !vma_migratable()
  mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
  vmstat: make vmstat_update deferrable
  mm, vmstat: make quiet_vmstat lighter
  mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
  memblock: don't mark memblock_phys_mem_size() as __init
  dump_stack: avoid potential deadlocks
  mm: validate_mm browse_rb SMP race condition
  ...

13 files changed, 34 insertions, 39 deletions

diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt
index 7b57fc0..49585b6 100644
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/Intel-IOMMU.txt
@@ -3,7 +3,7 @@ Linux IOMMU Support
 
 The architecture spec can be obtained from the below location.
 
-http://www.intel.com/technology/virtualization/
+http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/vt-directed-io-spec.pdf
 
 This guide gives a quick cheat sheet for some basic understanding.
 
diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt
index 65b3eac..e8d25e7 100644
--- a/Documentation/cgroup-v2.txt
+++ b/Documentation/cgroup-v2.txt
@@ -843,6 +843,10 @@ PAGE_SIZE multiple when read back.
 		Amount of memory used to cache filesystem data,
 		including tmpfs and shared memory.
 
+	  sock
+
+		Amount of memory used in network transmission buffers
+
 	  file_mapped
 
 		Amount of cached filesystem data mapped with mmap()
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 451fef2..10587bd 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -68,7 +68,7 @@ ethernet@f0b60000 {
 		phy1: ethernet-phy@1 {
 			max-speed = <1000>;
 			reg = <0x1>;
-			compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
@@ -115,7 +115,7 @@ ethernet@f0ba0000 {
 		phy0: ethernet-phy@0 {
 			max-speed = <1000>;
 			reg = <0x0>;
-			compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index 80411b2..ecacfa4 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -4,8 +4,6 @@ Required properties:
 - compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
   "hisilicon,hns-dsaf-v1" is for hip05.
   "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
-- dsa-name: dsa fabric name who provide this interface.
-  should be "dsafX", X is the dsaf id.
 - mode: dsa fabric mode string. only support one of dsaf modes like these:
 		"2port-64vf",
 		"6port-16rss",
@@ -26,9 +24,8 @@ Required properties:
 
 Example:
 
-dsa: dsa@c7000000 {
+dsaf0: dsa@c7000000 {
 	compatible = "hisilicon,hns-dsaf-v1";
-	dsa_name = "dsaf0";
 	mode = "6port-16rss";
 	interrupt-parent = <&mbigen_dsa>;
 	reg = <0x0 0xC0000000 0x0 0x420000
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
index 41d19be..e6a9d1c 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
@@ -4,8 +4,9 @@ Required properties:
 - compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
   "hisilicon,hns-nic-v1" is for hip05.
   "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
-- ae-name: accelerator name who provides this interface,
-  is simply a name referring to the name of name in the accelerator node.
+- ae-handle: accelerator engine handle for hns,
+  specifies a reference to the associating hardware driver node.
+  see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
 - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
   connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
   are called debug ports.
@@ -41,7 +42,7 @@ Example:
 
 	ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <0>;
 		local-mac-address = [a2 14 e4 4b 56 76];
 	};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index aeea50c..d0cb869 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -6,12 +6,17 @@ Required properties:
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.
 - phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+  mandatory for the core clock. If several clocks are given, then the
+  clock-names property must be used to identify them.
 
 Optional properties:
 - tx-csum-limit: maximum mtu supported by port that allow TX checksum.
   Value is presented in bytes. If not used, by default 1600B is set for
   "marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+  "core" for core clock and "bus" for the optional bus clock.
+
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
index 7938411..694987d 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
@@ -38,7 +38,6 @@ Example :
 
 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -48,7 +47,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -58,7 +56,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -68,7 +65,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -85,7 +81,6 @@ Example :
 
 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -95,7 +90,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -105,7 +99,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -115,7 +108,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt
index f65606f..491f5bd 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux.txt
@@ -47,7 +47,6 @@ Example :
 
 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -57,7 +56,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -67,7 +65,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -77,7 +74,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -94,7 +90,6 @@ Example :
 
 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -104,7 +99,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -114,7 +108,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -124,7 +117,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 525e165..bc1c3c8 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -17,8 +17,7 @@ Optional Properties:
   "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
   PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
   specifications. If neither of these are specified, the default is to
-  assume clause 22. The compatible list may also contain other
-  elements.
+  assume clause 22.
 
   If the phy's identifier is known then the list may contain an entry
   of the form: "ethernet-phy-idAAAA.BBBB" where
@@ -28,6 +27,9 @@ Optional Properties:
             4 hex digits. This is the chip vendor OUI bits 19:24,
             followed by 10 bits of a vendor specific ID.
 
+  The compatible list should not contain other values than those
+  listed here.
+
 - max-speed: Maximum PHY supported speed (10, 100, 1000...)
 
 - broken-turn-around: If set, indicates the PHY device does not correctly
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index fde9fd0..843b045b 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -240,8 +240,8 @@ Table 1-2: Contents of the status files (as of 4.1)
  RssFile                     size of resident file mappings
  RssShmem                    size of resident shmem memory (includes SysV shm,
                              mapping of tmpfs and shared anonymous mappings)
- VmData                      size of data, stack, and text segments
- VmStk                       size of data, stack, and text segments
+ VmData                      size of private data segments
+ VmStk                       size of stack segments
  VmExe                       size of text segment
  VmLib                       size of shared library code
  VmPTE                       size of page table entries
@@ -356,7 +356,7 @@ address           perms offset  dev   inode      pathname
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack:1001]
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
 a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
 a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
@@ -388,7 +388,6 @@ is not associated with a file:
 
  [heap]                   = the heap of the program
  [stack]                  = the stack of the main process
- [stack:1001]             = the stack of the thread with tid 1001
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
 
@@ -396,10 +395,8 @@ is not associated with a file:
 
 The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
 of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. This is a key difference from the
-content of /proc/PID/maps, where you will see all mappings that are being used
-as stack by all of those tasks. Hence, for the example above, the task-level
-map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
+as [stack] if that task sees it as a stack. Hence, for the example above, the
+task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
 
 08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 87d40a7..551ecf0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1496,6 +1496,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			could change it dynamically, usually by
 			/sys/module/printk/parameters/ignore_loglevel.
 
+	ignore_rlimit_data
+			Ignore RLIMIT_DATA setting for data mappings,
+			print warning at first misuse.  Can be changed via
+			/sys/module/kernel/parameters/ignore_rlimit_data.
+
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ceb44a0..73b36d7 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -594,7 +594,7 @@ tcp_fastopen - INTEGER
 
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
-	will be retransmitted. Should not be higher than 255. Default value
+	will be retransmitted. Should not be higher than 127. Default value
 	is 6, which corresponds to 63seconds till the last retransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 053f613..07e4cdf 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -3025,7 +3025,7 @@ len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0
 and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq),
 which is the maximum number of possibly pending cpu-local interrupts.
 
-4.90 KVM_SMI
+4.96 KVM_SMI
 
 Capability: KVM_CAP_X86_SMM
 Architectures: x86