Merge 'net-next/master'

Needed by the upcoming merge of iwlwifi-next-for-kalle-2016-03-02 tag.

29 files changed, 238 insertions, 90 deletions

diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill
deleted file mode 100644
index ff60ad9..0000000
--- a/Documentation/ABI/obsolete/sysfs-class-rfkill
+++ /dev/null
@@ -1,29 +0,0 @@
-rfkill - radio frequency (RF) connector kill switch support
-
-For details to this subsystem look at Documentation/rfkill.txt.
-
-What:		/sys/class/rfkill/rfkill[0-9]+/state
-Date:		09-Jul-2007
-KernelVersion	v2.6.22
-Contact:	linux-wireless@vger.kernel.org
-Description: 	Current state of the transmitter.
-		This file is deprecated and scheduled to be removed in 2014,
-		because its not possible to express the 'soft and hard block'
-		state of the rfkill driver.
-Values: 	A numeric value.
-		0: RFKILL_STATE_SOFT_BLOCKED
-			transmitter is turned off by software
-		1: RFKILL_STATE_UNBLOCKED
-			transmitter is (potentially) active
-		2: RFKILL_STATE_HARD_BLOCKED
-			transmitter is forced off by something outside of
-			the driver's control.
-
-What:		/sys/class/rfkill/rfkill[0-9]+/claim
-Date:		09-Jul-2007
-KernelVersion	v2.6.22
-Contact:	linux-wireless@vger.kernel.org
-Description:	This file is deprecated because there no longer is a way to
-		claim just control over a single rfkill instance.
-		This file is scheduled to be removed in 2012.
-Values: 	0: Kernel handles events
diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill
new file mode 100644
index 0000000..3ce6231
--- /dev/null
+++ b/Documentation/ABI/removed/sysfs-class-rfkill
@@ -0,0 +1,13 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+What:		/sys/class/rfkill/rfkill[0-9]+/claim
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description:	This file was deprecated because there no longer was a way to
+		claim just control over a single rfkill instance.
+		This file was scheduled to be removed in 2012, and was removed
+		in 2016.
+Values: 	0: Kernel handles events
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
index 097f522..e1ba4a1 100644
--- a/Documentation/ABI/stable/sysfs-class-rfkill
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -2,9 +2,8 @@ rfkill - radio frequency (RF) connector kill switch support
 
 For details to this subsystem look at Documentation/rfkill.txt.
 
-For the deprecated /sys/class/rfkill/*/state and
-/sys/class/rfkill/*/claim knobs of this interface look in
-Documentation/ABI/obsolete/sysfs-class-rfkill.
+For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
 
 What: 		/sys/class/rfkill
 Date:		09-Jul-2007
@@ -42,6 +41,28 @@ Values: 	A numeric value.
 		1: true
 
 
+What:		/sys/class/rfkill/rfkill[0-9]+/state
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current state of the transmitter.
+		This file was scheduled to be removed in 2014, but due to its
+		large number of users it will be sticking around for a bit
+		longer. Despite it being marked as stabe, the newer "hard" and
+		"soft" interfaces should be preffered, since it is not possible
+		to express the 'soft and hard block' state of the rfkill driver
+		through this interface. There will likely be another attempt to
+		remove it in the future.
+Values: 	A numeric value.
+		0: RFKILL_STATE_SOFT_BLOCKED
+			transmitter is turned off by software
+		1: RFKILL_STATE_UNBLOCKED
+			transmitter is (potentially) active
+		2: RFKILL_STATE_HARD_BLOCKED
+			transmitter is forced off by something outside of
+			the driver's control.
+
+
 What:		/sys/class/rfkill/rfkill[0-9]+/hard
 Date:		12-March-2010
 KernelVersion	v2.6.34
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
index 7f34a95..518f6a1 100644
--- a/Documentation/ABI/testing/sysfs-class-net-batman-adv
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -1,4 +1,20 @@
 
+What:		/sys/class/net/<iface>/batman-adv/throughput_override
+Date:		Feb 2014
+Contact:	Antonio Quartulli <antonio@meshcoding.com>
+description:
+		Defines the throughput value to be used by B.A.T.M.A.N. V
+		when estimating the link throughput using this interface.
+		If the value is set to 0 then batman-adv will try to
+		estimate the throughput by itself.
+
+What:           /sys/class/net/<iface>/batman-adv/elp_interval
+Date:           Feb 2014
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its probing packets for link quality measurements.
+
 What:           /sys/class/net/<iface>/batman-adv/iface_status
 Date:           May 2010
 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
@@ -12,4 +28,3 @@ Description:
                 The /sys/class/net/<iface>/batman-adv/mesh_iface file
                 displays the batman mesh interface this <iface>
                 currently is associated with.
-
diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt
index 65b3eac..ff49cf9 100644
--- a/Documentation/cgroup-v2.txt
+++ b/Documentation/cgroup-v2.txt
@@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and
 conventions of cgroup v2.  It describes all userland-visible aspects
 of cgroup including core and specific controller behaviors.  All
 future changes must be reflected in this document.  Documentation for
-v1 is available under Documentation/cgroup-legacy/.
+v1 is available under Documentation/cgroup-v1/.
 
 CONTENTS
 
@@ -843,6 +843,10 @@ PAGE_SIZE multiple when read back.
 		Amount of memory used to cache filesystem data,
 		including tmpfs and shared memory.
 
+	  sock
+
+		Amount of memory used in network transmission buffers
+
 	  file_mapped
 
 		Amount of cached filesystem data mapped with mmap()
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
index ace0599..20df350 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
@@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
 clock-output-names:
  - "xin24m" - crystal input - required,
  - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
+ - "rmii_clkin" - external EMAC clock - optional
 
 Example: Clock controller node:
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 7803e77..007a5b4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -24,9 +24,8 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
+  Cells 4 and beyond are reserved for future use and must have a value
+  of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
   registers, in the following order:
diff --git a/Documentation/devicetree/bindings/net/can/ifi_canfd.txt b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
new file mode 100644
index 0000000..20ea5c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
@@ -0,0 +1,15 @@
+IFI CANFD controller
+--------------------
+
+Required properties:
+  - compatible: Should be "ifi,canfd-1.0"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	canfd0: canfd@ff220000 {
+		compatible = "ifi,canfd-1.0";
+		reg = <0xff220000 0x00001000>;
+		interrupts = <0 43 0>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 002d844..65edc05 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -6,6 +6,15 @@ Required properties:
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
 	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
+	      "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
+	      "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
+	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
+	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
+	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device.
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
 - clocks: phandles and clock specifiers for 3 CAN clock inputs.
@@ -25,7 +34,7 @@ Example
 SoC common .dtsi file:
 
 	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7791";
+		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e80000 0 0x1000>;
 		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt
index b4a6d53..ac3160e 100644
--- a/Documentation/devicetree/bindings/net/can/sja1000.txt
+++ b/Documentation/devicetree/bindings/net/can/sja1000.txt
@@ -2,7 +2,7 @@ Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
 
 Required properties:
 
-- compatible : should be "nxp,sja1000".
+- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
 
 - reg : should specify the chip select, address offset and size required
 	to map the registers of the SJA1000. The size is usually 0x80.
@@ -14,6 +14,7 @@ Optional properties:
 
 - reg-io-width : Specify the size (in bytes) of the IO accesses that
 	should be performed on the device.  Valid value is 1, 2 or 4.
+	This property is ignored for technologic version.
 	Default to 1 (8 bits).
 
 - nxp,external-clock-frequency : Frequency of the external oscillator
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index c6b1cb5..b5a42df 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -25,7 +25,7 @@ Required properties:
 
 Optional properties for PHY child node:
 - reset-gpios : Should specify the gpio for phy reset
-- cdns,magic-packet : If present, indicates that the hardware supports waking
+- magic-packet : If present, indicates that the hardware supports waking
   up via magic packet.
 
 Examples:
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 81a9f9e..c8ac222 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -82,8 +82,8 @@ Example:
 				  "ch16", "ch17", "ch18", "ch19",
 				  "ch20", "ch21", "ch22", "ch23",
 				  "ch24";
-		clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
-		power-domains = <&cpg_clocks>;
+		clocks = <&cpg CPG_MOD 812>;
+		power-domains = <&cpg>;
 		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index e862a92..6605d19 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -17,7 +17,25 @@ Required properties:
 	The 1st cell is reset pre-delay in micro seconds.
 	The 2nd cell is reset pulse in micro seconds.
 	The 3rd cell is reset post-delay in micro seconds.
+
+Optional properties:
+- resets: Should contain a phandle to the STMMAC reset signal, if any
+- reset-names: Should contain the reset signal name "stmmaceth", if a
+	reset phandle is given
+- max-frame-size: See ethernet.txt file in the same directory
+- clocks: If present, the first clock should be the GMAC main clock and
+  the second clock should be peripheral's register interface clock. Further
+  clocks may be specified in derived bindings.
+- clock-names: One name for each entry in the clocks property, the
+  first one should be "stmmaceth" and the second one should be "pclk".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+  available this clock is used for programming the Timestamp Addend Register.
+  If not passed then the system clock will be used and this is fine on some
+  platforms.
+- tx-fifo-depth: See ethernet.txt file in the same directory
+- rx-fifo-depth: See ethernet.txt file in the same directory
 - snps,pbl		Programmable Burst Length
+- snps,aal		Address-Aligned Beats
 - snps,fixed-burst	Program the DMA to use the fixed burst mode
 - snps,mixed-burst	Program the DMA to use the mixed burst mode
 - snps,force_thresh_dma_mode	Force DMA to use the threshold mode for
@@ -29,27 +47,28 @@ Required properties:
 				supported by this device instance
 - snps,perfect-filter-entries:	Number of perfect filter entries supported
 				by this device instance
-
-Optional properties:
-- resets: Should contain a phandle to the STMMAC reset signal, if any
-- reset-names: Should contain the reset signal name "stmmaceth", if a
-	reset phandle is given
-- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock
-  The optional second clock should be peripheral's register interface clock.
-  The third optional clock should be the ptp reference clock.
-  Further clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property.
-  The first one should be "stmmaceth".
-  The optional second one should be "pclk".
-  The optional third one should be "clk_ptp_ref".
-- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
-- tx-fifo-depth: See ethernet.txt file in the same directory
-- rx-fifo-depth: See ethernet.txt file in the same directory
+- AXI BUS Mode parameters: below the list of all the parameters to program the
+			   AXI register inside the DMA module:
+	- snps,lpi_en: enable Low Power Interface
+	- snps,xit_frm: unlock on WoL
+	- snps,wr_osr_lmt: max write oustanding req. limit
+	- snps,rd_osr_lmt: max read oustanding req. limit
+	- snps,kbbe: do not cross 1KiB boundary.
+	- snps,axi_all: align address
+	- snps,blen: this is a vector of supported burst length.
+	- snps,fb: fixed-burst
+	- snps,mb: mixed-burst
+	- snps,rb: rebuild INCRx Burst
 - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
 
 Examples:
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <256 128 64 32 0 0 0>;
+	};
+
 	gmac0: ethernet@e0800000 {
 		compatible = "st,spear600-gmac";
 		reg = <0xe0800000 0x8000>;
@@ -65,6 +84,7 @@ Examples:
 		tx-fifo-depth = <16384>;
 		clocks = <&clock>;
 		clock-names = "stmmaceth";
+		snps,axi-config = <&stmmac_axi_setup>;
 		mdio0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index 4e8b90e..07a7509 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -8,6 +8,7 @@ OHCI and EHCI controllers.
 Required properties:
 - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
 	      "renesas,pci-r8a7791" for the R8A7791 SoC;
+	      "renesas,pci-r8a7793" for the R8A7793 SoC;
 	      "renesas,pci-r8a7794" for the R8A7794 SoC;
 	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
 
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 558fe52..6cf9969 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -4,6 +4,7 @@ Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
+	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
 
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
index ac2fcd6..1068ffc 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -14,6 +14,10 @@ Required properties:
   interrupt number is the rtc alarm interrupt and second interrupt number
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
+- clocks: Must contain a list of phandle and clock specifier for the rtc
+          and source clocks.
+- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
+               same order as the clocks property.
 
 Example:
 
@@ -21,4 +25,6 @@ Example:
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <44 0 45 0>;
+		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index 35ae1fb..ed94c21 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index ce55c0a..4da41bf 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -30,6 +30,8 @@ The compatible list for this generic sound card currently:
  "fsl,imx-audio-sgtl5000"
  (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
 
+ "fsl,imx-audio-wm8960"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 332e625..e5ee3f1 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <115000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-gen2-thermal",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 72e2c5a..c6134dc 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -111,6 +111,7 @@ hp	Hewlett Packard
 i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
+ifi	Ingenieurburo Fur Ic-Technologie (I/F/I)
 iom	Iomega Corporation
 img	Imagination Technologies Ltd.
 ingenic	Ingenic Semiconductor
diff --git a/Documentation/filesystems/efivarfs.txt b/Documentation/filesystems/efivarfs.txt
index c477af0..686a64b 100644
--- a/Documentation/filesystems/efivarfs.txt
+++ b/Documentation/filesystems/efivarfs.txt
@@ -14,3 +14,10 @@ filesystem.
 efivarfs is typically mounted like this,
 
 	mount -t efivarfs none /sys/firmware/efi/efivars
+
+Due to the presence of numerous firmware bugs where removing non-standard
+UEFI variables causes the system firmware to fail to POST, efivarfs
+files that are not well-known standardized variables are created
+as immutable files.  This doesn't prevent removal - "chattr -i" will work -
+but it does prevent this kind of failure from being accomplished
+accidentally.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index fde9fd0..843b045b 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -240,8 +240,8 @@ Table 1-2: Contents of the status files (as of 4.1)
  RssFile                     size of resident file mappings
  RssShmem                    size of resident shmem memory (includes SysV shm,
                              mapping of tmpfs and shared anonymous mappings)
- VmData                      size of data, stack, and text segments
- VmStk                       size of data, stack, and text segments
+ VmData                      size of private data segments
+ VmStk                       size of stack segments
  VmExe                       size of text segment
  VmLib                       size of shared library code
  VmPTE                       size of page table entries
@@ -356,7 +356,7 @@ address           perms offset  dev   inode      pathname
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack:1001]
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
 a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
 a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
@@ -388,7 +388,6 @@ is not associated with a file:
 
  [heap]                   = the heap of the program
  [stack]                  = the stack of the main process
- [stack:1001]             = the stack of the thread with tid 1001
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
 
@@ -396,10 +395,8 @@ is not associated with a file:
 
 The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
 of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. This is a key difference from the
-content of /proc/PID/maps, where you will see all mappings that are being used
-as stack by all of those tasks. Hence, for the example above, the task-level
-map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
+as [stack] if that task sees it as a stack. Hence, for the example above, the
+task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
 
 08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 87d40a7..9a53c92 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1496,6 +1496,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			could change it dynamically, usually by
 			/sys/module/printk/parameters/ignore_loglevel.
 
+	ignore_rlimit_data
+			Ignore RLIMIT_DATA setting for data mappings,
+			print warning at first misuse.  Can be changed via
+			/sys/module/kernel/parameters/ignore_rlimit_data.
+
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
@@ -4230,6 +4235,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The default value of this parameter is determined by
 			the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
 
+	workqueue.debug_force_rr_cpu
+			Workqueue used to implicitly guarantee that work
+			items queued without explicit CPU specified are put
+			on the local CPU.  This guarantee is no longer true
+			and while local CPU is still preferred work items
+			may be put on foreign CPUs.  This debug option
+			forces round-robin CPU selection to flush out
+			usages which depend on the now broken guarantee.
+			When enabled, memory and cache locality will be
+			impacted.
+
 	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
 			default x2apic cluster mode on platforms
 			supporting x2apic.
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index aa9c1f9..974e9c3 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -524,17 +524,14 @@ Bridge layer
 - port_join_bridge: bridge layer function invoked when a given switch port is
   added to a bridge, this function should be doing the necessary at the switch
   level to permit the joining port from being added to the relevant logical
-  domain for it to ingress/egress traffic with other members of the bridge. DSA
-  does nothing but calculate a bitmask of switch ports currently members of the
-  specified bridge being requested the join
+  domain for it to ingress/egress traffic with other members of the bridge.
 
 - port_leave_bridge: bridge layer function invoked when a given switch port is
   removed from a bridge, this function should be doing the necessary at the
   switch level to deny the leaving port from ingress/egress traffic from the
   remaining bridge members. When the port leaves the bridge, it should be aged
   out at the switch hardware for the switch to (re) learn MAC addresses behind
-  this port. DSA calculates the bitmask of ports still members of the bridge
-  being left
+  this port.
 
 - port_stp_update: bridge layer function invoked when a given switch port STP
   state is computed by the bridge layer and should be propagated to switch
@@ -545,20 +542,15 @@ Bridge layer
 Bridge VLAN filtering
 ---------------------
 
-- port_pvid_get: bridge layer function invoked when a Port-based VLAN ID is
-  queried for the given switch port
-
-- port_pvid_set: bridge layer function invoked when a Port-based VLAN ID needs
-  to be configured on the given switch port
-
 - port_vlan_add: bridge layer function invoked when a VLAN is configured
   (tagged or untagged) for the given switch port
 
 - port_vlan_del: bridge layer function invoked when a VLAN is removed from the
   given switch port
 
-- vlan_getnext: bridge layer function invoked to query the next configured VLAN
-  in the switch, i.e. returns the bitmaps of members and untagged ports
+- port_vlan_dump: bridge layer function invoked with a switchdev callback
+  function that the driver has to call for each VLAN the given port is a member
+  of. A switchdev object is used to carry the VID and bridge flags.
 
 - port_fdb_add: bridge layer function invoked when the bridge wants to install a
   Forwarding Database entry, the switch hardware should be programmed with the
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 24ce97f..d5df40c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1563,6 +1563,15 @@ temp_prefered_lft - INTEGER
 	Preferred lifetime (in seconds) for temporary addresses.
 	Default: 86400 (1 day)
 
+keep_addr_on_down - INTEGER
+	Keep all IPv6 addresses on an interface down event. If set static
+	global addresses with no expiration time are not flushed.
+	  >0 : enabled
+	   0 : system default
+	  <0 : disabled
+
+	Default: 0 (addresses are removed)
+
 max_desync_factor - INTEGER
 	Maximum value for DESYNC_FACTOR, which is a random value
 	that ensures that clients don't synchronize with each
diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt
index 3a93007..ec8f934 100644
--- a/Documentation/networking/mac80211-injection.txt
+++ b/Documentation/networking/mac80211-injection.txt
@@ -28,6 +28,23 @@ radiotap headers and used to control injection:
    IEEE80211_RADIOTAP_F_TX_NOACK: frame should be sent without waiting for
 				  an ACK even if it is a unicast frame
 
+ * IEEE80211_RADIOTAP_RATE
+
+   legacy rate for the transmission (only for devices without own rate control)
+
+ * IEEE80211_RADIOTAP_MCS
+
+   HT rate for the transmission (only for devices without own rate control).
+   Also some flags are parsed
+
+   IEEE80211_TX_RC_SHORT_GI: use short guard interval
+   IEEE80211_TX_RC_40_MHZ_WIDTH: send in HT40 mode
+
+ * IEEE80211_RADIOTAP_DATA_RETRIES
+
+   number of retries when either IEEE80211_RADIOTAP_RATE or
+   IEEE80211_RADIOTAP_MCS was used
+
 The injection code can also skip all other currently defined radiotap fields
 facilitating replay of captured radiotap headers directly.
 
diff --git a/Documentation/networking/rds.txt b/Documentation/networking/rds.txt
index e1a3d59..9d219d8 100644
--- a/Documentation/networking/rds.txt
+++ b/Documentation/networking/rds.txt
@@ -19,9 +19,7 @@ to N*N if you use a connection-oriented socket transport like TCP.
 
 RDS is not Infiniband-specific; it was designed to support different
 transports.  The current implementation used to support RDS over TCP as well
-as IB. Work is in progress to support RDS over iWARP, and using DCE to
-guarantee no dropped packets on Ethernet, it may be possible to use RDS over
-UDP in the future.
+as IB.
 
 The high-level semantics of RDS from the application's point of view are
 
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 2ee6ef9..1f0c270 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -83,6 +83,8 @@ rfkill drivers that control devices that can be hard-blocked unless they also
 assign the poll_hw_block() callback (then the rfkill core will poll the
 device). Don't do this unless you cannot get the event in any other way.
 
+RFKill provides per-switch LED triggers, which can be used to drive LEDs
+according to the switch state (LED_FULL when blocked, LED_OFF otherwise).
 
 
 5. Userspace support
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index 767392f..a484d2c 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -1,9 +1,7 @@
 		High Precision Event Timer Driver for Linux
 
 The High Precision Event Timer (HPET) hardware follows a specification
-by Intel and Microsoft which can be found at
-
-	http://www.intel.com/hardwaredesign/hpetspec_1.pdf
+by Intel and Microsoft, revision 1.
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,