Merge Linaro linux 4.9.62 into linux-4.9

Signed-off-by: Xiaobo Xie <xiaobo.xie@nxp.com>

10 files changed, 99 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
index ad440a2..e926aea 100644
--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -31,6 +31,12 @@ to deliver its interrupts via SPIs.
   This also affects writes to the tval register, due to the implicit
   counter read.
 
+- hisilicon,erratum-161010101 : A boolean property. Indicates the
+  presence of Hisilicon erratum 161010101, which says that reading the
+  counters is unreliable in some cases, and reads may return a value 32
+  beyond the correct value. This also affects writes to the tval
+  registers, due to the implicit counter read.
+
 ** Optional properties:
 
 - arm,cpu-registers-not-fw-configured : Firmware does not initialize
diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt
index f0841ce..715622c 100644
--- a/Documentation/devicetree/bindings/arm/davinci.txt
+++ b/Documentation/devicetree/bindings/arm/davinci.txt
@@ -13,6 +13,10 @@ EnBW AM1808 based CMC board
 Required root node properties:
     - compatible = "enbw,cmc", "ti,da850;
 
+LEGO MINDSTORMS EV3 (AM1808 based)
+Required root node properties:
+    - compatible = "lego,ev3", "ti,da850";
+
 Generic DaVinci Boards
 ----------------------
 
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000..6ec1a88
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,46 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+	compatible = "ti,ths8135";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vga_bridge_in: endpoint {
+				remote-endpoint = <&lcdc_out_vga>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			vga_bridge_out: endpoint {
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
new file mode 100644
index 0000000..b362940
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
@@ -0,0 +1,18 @@
+* AVIA HX711 ADC chip for weight cells
+  Bit-banging driver
+
+Required properties:
+ - compatible:	Should be "avia,hx711"
+ - sck-gpios:	Definition of the GPIO for the clock
+ - dout-gpios:	Definition of the GPIO for data-out
+		See Documentation/devicetree/bindings/gpio/gpio.txt
+ - avdd-supply:	Definition of the regulator used as analog supply
+
+Example:
+weight@0 {
+	compatible = "avia,hx711";
+	sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+	dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	avdd-suppy = <&avdd>;
+};
+
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
index 3e5b979..8682ab6 100644
--- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt.
 Required properties:
 - compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
 
-Required properties for TPS65218:
+Required properties:
 - interrupts: should be one of the following
+   - <2>: For controllers compatible with tps65217
    - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
 
 Examples:
@@ -17,6 +18,7 @@ Examples:
 &tps {
 	tps65217-pwrbutton {
 		compatible = "ti,tps65217-pwrbutton";
+		interrupts = <2>;
 	};
 };
 
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index c010faf..c7194e8 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index bc1c3c8..62bdc5f 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -35,6 +35,15 @@ Optional Properties:
 - broken-turn-around: If set, indicates the PHY device does not correctly
   release the turn around line low at the end of a MDIO transaction.
 
+- eee-broken-100tx:
+- eee-broken-1000t:
+- eee-broken-10gt:
+- eee-broken-1000kx:
+- eee-broken-10gkx4:
+- eee-broken-10gkr:
+  Mark the corresponding energy efficient ethernet mode as broken and
+  request the ethernet to stop advertising it.
+
 Example:
 
 ethernet-phy@0 {
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 5d21141..75bcaa3 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
index 98d131a..a11072c 100644
--- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
@@ -2,11 +2,16 @@ TPS65217 Charger
 
 Required Properties:
 -compatible: "ti,tps65217-charger"
+-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
+             Should be <0> for the USB charger and <1> for the AC adapter.
+-interrupt-names: Should be "USB" and "AC"
 
 This node is a subnode of the tps65217 PMIC.
 
 Example:
 
 	tps65217-charger {
-		compatible = "ti,tps65090-charger";
+		compatible = "ti,tps65217-charger";
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
 	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6ab5d04..a40f881 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -38,6 +38,7 @@ atmel	Atmel Corporation
 auo	AU Optronics Corporation
 auvidea Auvidea GmbH
 avago	Avago Technologies
+avia	avia semiconductor
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
 axis	Axis Communications AB
 boe	BOE Technology Group Co., Ltd.
@@ -153,6 +154,7 @@ kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation
 lacie	LaCie
 lantiq	Lantiq Semiconductor
+lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
 linaro	Linaro Limited