Merge tag 'v3.19-rc7' into x86/asm, to refresh the branch before pulling in new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

9 files changed, 82 insertions, 65 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop
deleted file mode 100644
index 7969443..0000000
--- a/Documentation/ABI/testing/sysfs-platform-dell-laptop
+++ /dev/null
@@ -1,60 +0,0 @@
-What:		/sys/class/leds/dell::kbd_backlight/als_setting
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to control the automatic keyboard
-		illumination mode on some systems that have an ambient
-		light sensor. Write 1 to this file to enable the auto
-		mode, 0 to disable it.
-
-What:		/sys/class/leds/dell::kbd_backlight/start_triggers
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to control the input triggers that
-		turn on the keyboard backlight illumination that is
-		disabled because of inactivity.
-		Read the file to see the triggers available. The ones
-		enabled are preceded by '+', those disabled by '-'.
-
-		To enable a trigger, write its name preceded by '+' to
-		this file. To disable a trigger, write its name preceded
-		by '-' instead.
-
-		For example, to enable the keyboard as trigger run:
-		    echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-		To disable it:
-		    echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-
-		Note that not all the available triggers can be configured.
-
-What:		/sys/class/leds/dell::kbd_backlight/stop_timeout
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to specify the interval after which the
-		keyboard illumination is disabled because of inactivity.
-		The timeouts are expressed in seconds, minutes, hours and
-		days, for which the symbols are 's', 'm', 'h' and 'd'
-		respectively.
-
-		To configure the timeout, write to this file a value along
-		with any the above units. If no unit is specified, the value
-		is assumed to be expressed in seconds.
-
-		For example, to set the timeout to 10 minutes run:
-		    echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
-
-		Note that when this file is read, the returned value might be
-		expressed in a different unit than the one used when the timeout
-		was set.
-
-		Also note that only some timeouts are supported and that
-		some systems might fall back to a specific timeout in case
-		an invalid timeout is written to this file.
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 556c866..b78564b2 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -23,7 +23,7 @@ Required nodes:
     range of 0x200 bytes.
 
 - syscon: the root node of the Integrator platforms must have a
-  system controller node pointong to the control registers,
+  system controller node pointing to the control registers,
   with the compatible string
   "arm,integrator-ap-syscon"
   "arm,integrator-cp-syscon"
diff --git a/Documentation/devicetree/bindings/arm/fw-cfg.txt b/Documentation/devicetree/bindings/arm/fw-cfg.txt
new file mode 100644
index 0000000..953fb64
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fw-cfg.txt
@@ -0,0 +1,72 @@
+* QEMU Firmware Configuration bindings for ARM
+
+QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
+provide the following Firmware Configuration interface on the "virt" machine
+type:
+
+- A write-only, 16-bit wide selector (or control) register,
+- a read-write, 64-bit wide data register.
+
+QEMU exposes the control and data register to ARM guests as memory mapped
+registers; their location is communicated to the guest's UEFI firmware in the
+DTB that QEMU places at the bottom of the guest's DRAM.
+
+The guest writes a selector value (a key) to the selector register, and then
+can read the corresponding data (produced by QEMU) via the data register. If
+the selected entry is writable, the guest can rewrite it through the data
+register.
+
+The selector register takes keys in big endian byte order.
+
+The data register allows accesses with 8, 16, 32 and 64-bit width (only at
+offset 0 of the register). Accesses larger than a byte are interpreted as
+arrays, bundled together only for better performance. The bytes constituting
+such a word, in increasing address order, correspond to the bytes that would
+have been transferred by byte-wide accesses in chronological order.
+
+The interface allows guest firmware to download various parameters and blobs
+that affect how the firmware works and what tables it installs for the guest
+OS. For example, boot order of devices, ACPI tables, SMBIOS tables, kernel and
+initrd images for direct kernel booting, virtual machine UUID, SMP information,
+virtual NUMA topology, and so on.
+
+The authoritative registry of the valid selector values and their meanings is
+the QEMU source code; the structure of the data blobs corresponding to the
+individual key values is also defined in the QEMU source code.
+
+The presence of the registers can be verified by selecting the "signature" blob
+with key 0x0000, and reading four bytes from the data register. The returned
+signature is "QEMU".
+
+The outermost protocol (involving the write / read sequences of the control and
+data registers) is expected to be versioned, and/or described by feature bits.
+The interface revision / feature bitmap can be retrieved with key 0x0001. The
+blob to be read from the data register has size 4, and it is to be interpreted
+as a uint32_t value in little endian byte order. The current value
+(corresponding to the above outer protocol) is zero.
+
+The guest kernel is not expected to use these registers (although it is
+certainly allowed to); the device tree bindings are documented here because
+this is where device tree bindings reside in general.
+
+Required properties:
+
+- compatible: "qemu,fw-cfg-mmio".
+
+- reg: the MMIO region used by the device.
+  * Bytes 0x0 to 0x7 cover the data register.
+  * Bytes 0x8 to 0x9 cover the selector register.
+  * Further registers may be appended to the region in case of future interface
+    revisions / feature bits.
+
+Example:
+
+/ {
+	#size-cells = <0x2>;
+	#address-cells = <0x2>;
+
+	fw-cfg@9020000 {
+		compatible = "qemu,fw-cfg-mmio";
+		reg = <0x0 0x9020000 0x0 0xa>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt
index 1a69c07..fcb1c6a 100644
--- a/Documentation/devicetree/bindings/graph.txt
+++ b/Documentation/devicetree/bindings/graph.txt
@@ -19,7 +19,7 @@ type of the connections, they just map their existence. Specific properties
 may be described by specialized bindings depending on the type of connection.
 
 To see how this binding applies to video pipelines, for example, see
-Documentation/device-tree/bindings/media/video-interfaces.txt.
+Documentation/devicetree/bindings/media/video-interfaces.txt.
 Here the ports describe data interfaces, and the links between them are
 the connecting data buses. A single port with multiple connections can
 correspond to multiple devices being connected to the same physical bus.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt
index 437e0db..4c26fda 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-st.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-st.txt
@@ -31,7 +31,7 @@ i2c0: i2c@fed40000 {
 	compatible	= "st,comms-ssc4-i2c";
 	reg		= <0xfed40000 0x110>;
 	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&CLK_S_ICN_REG_0>;
+	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 	clock-names	= "ssc";
 	clock-frequency = <400000>;
 	pinctrl-names	= "default";
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 9f4e382..9f41d05 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -47,6 +47,7 @@ dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
 dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
 dallas,ds75		Digital Thermometer and Thermostat
 dlg,da9053		DA9053: flexible system level PMIC with multicore support
+dlg,da9063		DA9063: system PMIC for quad-core application processors
 epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index 0328088..24c5cda 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -4,7 +4,8 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+  "ti,dm816-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b1df0ad..d443279 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -9,7 +9,6 @@ ad	Avionic Design GmbH
 adapteva	Adapteva, Inc.
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
-ak	Asahi Kasei Corp.
 allwinner	Allwinner Technology Co., Ltd.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
@@ -20,6 +19,7 @@ amstaos	AMS-Taos Inc.
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
+asahi-kasei	Asahi Kasei Corp.
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
@@ -127,6 +127,7 @@ pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm Technologies, Inc
+qemu	QEMU, a generic and open source machine emulator and virtualizer
 qnap	QNAP Systems, Inc.
 radxa	Radxa
 raidsonic	RaidSonic Technology GmbH
@@ -168,6 +169,7 @@ usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
+virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 voipac	Voipac Technologies s.r.o.
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4df73da..176d4fe 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1277,6 +1277,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
 	i8042.reset	[HW] Reset the controller during init and cleanup
 	i8042.unlock	[HW] Unlock (ignore) the keylock
+	i8042.kbdreset  [HW] Reset device connected to KBD port
 
 	i810=		[HW,DRM]