Merge tag 'spi-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A few core tweaks this time together with the usual collection of
  driver specific updates and fixes plus a larger than average selection
  of new device support:

   - fix DMA mapping of unaligned vmalloc() buffers

   - statistics tracking transfer volumes exposed via sysfs

   - new drivers for Freescale MPC5125, Intel Sunrise Point, Mediatek
     SoCs, and Netlogic XLP SoCs"

* tag 'spi-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: sh-msiof: Fix FIFO size to 64 word from 256 word
  spi: fsl-(e)spi: Fix checking return value of devm_ioremap_resource
  spi: Add DT bindings documentation for Netlogic XLP SPI controller
  spi/xlp: SPI controller driver for Netlogic XLP SoCs
  spi: fsl-espi: add runtime PM
  spi: fsl-(e)spi: simplify cleanup code
  spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  spi: mediatek: fix SPI_CMD_PAUSE_IE macro error
  spi: check bits_per_word in spi_setup
  spi: mediatek: replace *_time name
  spi: mediatek: add PM clk_prepare_enable fail flow
  spi: mediatek: replace int with u32, delete TAB and define MTK_SPI_PAUSE_INT_STATUS marco
  spi: mediatek: add linux/io.h include file
  spi/bcm63xx-hsspi: add support for dual spi read/write
  spi: dw: Allow interface drivers to limit data I/O to word sizes
  dt: snps,dw-apb-ssi: Document new I/O data register width property
  spi: Fall back to master maximum speed if no slave speed specified
  spi: mediatek: use BIT() to instead of SPI_CMD_*_OFFSET
  spi: medaitek: revise quirks compatibility style
  spi: mediatek: fix spi incorrect endian usage
  ...

6 files changed, 113 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
index 8832e87..6478175 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -6,14 +6,14 @@ PSC in UART mode
 For PSC in UART mode the needed PSC serial devices
 are specified by fsl,mpc5121-psc-uart nodes in the
 fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
-Controller node fsl,mpc5121-psc-fifo is requered there:
+Controller node fsl,mpc5121-psc-fifo is required there:
 
-fsl,mpc5121-psc-uart nodes
+fsl,mpc512x-psc-uart nodes
 --------------------------
 
 Required properties :
- - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
- - cell-index : Index of the PSC in hardware
+ - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
+   Supported <soc>s: mpc5121, mpc5125
  - reg : Offset and length of the register set for the PSC device
  - interrupts : <a b> where a is the interrupt number of the
    PSC FIFO Controller and b is a field that represents an
@@ -25,12 +25,21 @@ Recommended properties :
  - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
  - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
 
+PSC in SPI mode
+---------------
 
-fsl,mpc5121-psc-fifo node
+Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
+for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
+The required and recommended properties are identical to the
+fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
+string.
+
+fsl,mpc512x-psc-fifo node
 -------------------------
 
 Required properties :
- - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - compatible : Should be "fsl,<soc>-psc-fifo"
+   Supported <soc>s: mpc5121, mpc5125
  - reg : Offset and length of the register set for the PSC
          FIFO Controller
  - interrupts : <a b> where a is the interrupt number of the
@@ -39,6 +48,9 @@ Required properties :
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
 
+Recommended properties :
+ - clocks : specifies the clock needed to operate the fifo controller
+ - clock-names : name(s) for the clock(s) listed in clocks
 
 Example for a board using PSC0 and PSC1 devices in serial mode:
 
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index bd99193..204b311 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -10,6 +10,8 @@ Required properties:
 Optional properties:
 - cs-gpios : Specifies the gpio pis to be used for chipselects.
 - num-cs : The number of chipselects. If omitted, this will default to 4.
+- reg-io-width : The I/O register width (in bytes) implemented by this
+  device.  Supported values are 2 or 4 (the default).
 
 Child nodes as per the generic SPI binding.
 
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 12ecfe9..d1e914a 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -12,6 +12,8 @@ Required properties:
 - compatible:
 	- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
 	- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+	- "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
+		family
 - reg: Offset and length of SPI controller register space
 - num-cs: Number of chip selects. This includes internal as well as
 	GPIO chip selects.
diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
index e02fbf1..494db60 100644
--- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
@@ -21,6 +21,7 @@ Required properties:
 Optional properties:
 - img,supports-quad-mode: Should be set if the interface supports quad mode
   SPI transfers.
+- spfi-max-frequency: Maximum speed supported by the spfi block.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
new file mode 100644
index 0000000..dcefc43
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -0,0 +1,51 @@
+Binding for MTK SPI controller
+
+Required properties:
+- compatible: should be one of the following.
+    - mediatek,mt8173-spi: for mt8173 platforms
+    - mediatek,mt8135-spi: for mt8135 platforms
+    - mediatek,mt6589-spi: for mt6589 platforms
+
+- #address-cells: should be 1.
+
+- #size-cells: should be 0.
+
+- reg: Address and length of the register set for the device
+
+- interrupts: Should contain spi interrupt
+
+- clocks: phandles to input clocks.
+  The first should be <&topckgen CLK_TOP_SPI_SEL>.
+  The second should be one of the following.
+   -  <&clk26m>: specify parent clock 26MHZ.
+   -  <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
+				      It's the default one.
+   -  <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
+   -  <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
+   -  <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
+
+- clock-names: shall be "spi-clk" for the controller clock, and
+  "parent-clk" for the parent clock.
+
+Optional properties:
+- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
+  controller used, this value should be 0~3, only required for MT8173.
+    0: specify GPIO69,70,71,72 for spi pins.
+    1: specify GPIO102,103,104,105 for spi pins.
+    2: specify GPIO128,129,130,131 for spi pins.
+    3: specify GPIO5,6,7,8 for spi pins.
+
+Example:
+
+- SoC Specific Portion:
+spi: spi@1100a000 {
+	compatible = "mediatek,mt8173-spi";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0 0x1100a000 0 0x1000>;
+	interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&topckgen CLK_TOP_SPI_SEL>, <&topckgen CLK_TOP_SYSPLL3_D2>;
+	clock-names = "spi-clk", "parent-clk";
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
new file mode 100644
index 0000000..40e82d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xlp.txt
@@ -0,0 +1,39 @@
+SPI Master controller for Netlogic XLP MIPS64 SOCs
+==================================================
+
+Currently this SPI controller driver is supported for the following
+Netlogic XLP SoCs:
+	XLP832, XLP316, XLP208, XLP980, XLP532
+
+Required properties:
+- compatible		: Should be "netlogic,xlp832-spi".
+- #address-cells	: Number of cells required to define a chip select address
+			  on the SPI bus.
+- #size-cells		: Should be zero.
+- reg			: Should contain register location and length.
+- clocks		: Phandle of the spi clock
+- interrupts		: Interrupt number used by this controller.
+- interrupt-parent	: Phandle of the parent interrupt controller.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+
+	spi: xlp_spi@3a100 {
+		compatible = "netlogic,xlp832-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x3a100 0x100>;
+		clocks = <&spi_clk>;
+		interrupts = <34>;
+		interrupt-parent = <&pic>;
+
+		spi_nor@1 {
+			compatible = "spansion,s25sl12801";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <1>;	/* Chip Select */
+			spi-max-frequency = <40000000>;
+		};
+};