summaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2016-05-10 13:46:55 (GMT)
committerArnd Bergmann <arnd@arndb.de>2016-05-10 13:46:55 (GMT)
commit3a99f3d8d27b643e923cd55e435f8f879f017fef (patch)
tree6c55144c00c5a2c9f85be59770ae9f28a94f1c87 /arch/arm/boot
parent21c9a6487387fc629955992ef62672bc0aae5daa (diff)
parent7ba5dd530072d383f713a0fe1e4ffcdc5523ae37 (diff)
downloadlinux-3a99f3d8d27b643e923cd55e435f8f879f017fef.tar.xz
Merge tag 'ux500-armsoc-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt
Merge "ux500 Devicetree updates for v4.7" from Linus Walleij: - Use generic include files - Make accelerometers open drain on the TVK board * tag 'ux500-armsoc-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500: configure the accelerometers open drain ARM: dts: ux500: use the GIC include header ARM: dts: ux500: use the GPIO DT header
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/ste-ccu9540.dts2
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi92
-rw-r--r--arch/arm/boot/dts/ste-href-stuib.dtsi4
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618.dtsi16
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60.dtsi8
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus.dtsi6
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts19
7 files changed, 75 insertions, 72 deletions
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index c8b8158..b3b9bb8 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -49,7 +49,7 @@
cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
- cd-gpios = <&gpio7 6 0x4>; // 230
+ cd-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; // 230
cd-inverted;
status = "okay";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 341f5b7..6ae5683 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -10,8 +10,10 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mfd/dbx500-prcmu.h>
#include <dt-bindings/arm/ux500_pm_domains.h>
+#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
@@ -203,14 +205,14 @@
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
- interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
pm_domains: pm_domains0 {
@@ -253,7 +255,7 @@
/* Nomadik System Timer */
compatible = "st,nomadik-mtu";
reg = <0xa03c6000 0x1000>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
clock-names = "timclk", "apb_pclk";
@@ -262,7 +264,7 @@
timer@a0410600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xa0410600 0x20>;
- interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&smp_twd_clk>;
};
@@ -270,14 +272,14 @@
watchdog@a0410620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xa0410620 0x20>;
- interrupts = <1 14 0x304>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&smp_twd_clk>;
};
rtc@80154000 {
compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
- interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rtc_clk>;
clock-names = "apb_pclk";
@@ -287,7 +289,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e000 0x80>;
- interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -302,7 +304,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e080 0x80>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -317,7 +319,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e000 0x80>;
- interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -332,7 +334,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e080 0x80>;
- interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -347,7 +349,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e100 0x80>;
- interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -362,7 +364,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e180 0x80>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -377,7 +379,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e000 0x80>;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -392,7 +394,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e080 0x80>;
- interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -407,7 +409,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0xa03fe000 0x80>;
- interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -429,7 +431,7 @@
usb_per5@a03e0000 {
compatible = "stericsson,db8500-musb";
reg = <0xa03e0000 0x10000>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
dr_mode = "otg";
@@ -467,7 +469,7 @@
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
reg-names = "base", "lcpa";
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <3>;
memcpy-channels = <56 57 58 59 60>;
@@ -479,7 +481,7 @@
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
@@ -597,7 +599,7 @@
ab8500 {
compatible = "stericsson,ab8500";
interrupt-parent = <&intc>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -785,7 +787,7 @@
i2c@80004000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
- interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -800,7 +802,7 @@
i2c@80122000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
- interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -816,7 +818,7 @@
i2c@80128000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
- interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -832,7 +834,7 @@
i2c@80110000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
- interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -848,7 +850,7 @@
i2c@8012a000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
- interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -864,7 +866,7 @@
ssp@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
- interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
@@ -878,7 +880,7 @@
ssp@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
- interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
@@ -892,7 +894,7 @@
spi@8011a000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x8011a000 0x1000>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
@@ -907,7 +909,7 @@
spi@80112000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80112000 0x1000>;
- interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
@@ -922,7 +924,7 @@
spi@80111000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80111000 0x1000>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
@@ -937,7 +939,7 @@
spi@80129000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80129000 0x1000>;
- interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
@@ -952,7 +954,7 @@
ux500_serial0: uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
<&dma 13 0 0x0>; /* Logical - MemToDev */
@@ -967,7 +969,7 @@
ux500_serial1: uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
- interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
<&dma 12 0 0x0>; /* Logical - MemToDev */
@@ -982,7 +984,7 @@
ux500_serial2: uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
- interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
<&dma 11 0 0x0>; /* Logical - MemToDev */
@@ -997,7 +999,7 @@
sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
- interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
<&dma 29 0 0x0>; /* Logical - MemToDev */
@@ -1013,7 +1015,7 @@
sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
<&dma 32 0 0x0>; /* Logical - MemToDev */
@@ -1029,7 +1031,7 @@
sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
- interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
<&dma 28 0 0x0>; /* Logical - MemToDev */
@@ -1045,7 +1047,7 @@
sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
- interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
<&dma 41 0 0x0>; /* Logical - MemToDev */
@@ -1061,7 +1063,7 @@
sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
- interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
<&dma 42 0 0x0>; /* Logical - MemToDev */
@@ -1077,7 +1079,7 @@
sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
- interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
<&dma 43 0 0x0>; /* Logical - MemToDev */
@@ -1093,7 +1095,7 @@
msp0: msp@80123000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80123000 0x1000>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
@@ -1109,7 +1111,7 @@
msp1: msp@80124000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80124000 0x1000>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
/* This DMA channel only exist on DB8500 v1 */
@@ -1126,7 +1128,7 @@
msp2: msp@80117000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80117000 0x1000>;
- interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */
@@ -1143,7 +1145,7 @@
msp3: msp@80125000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80125000 0x1000>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
/* This DMA channel only exist on DB8500 v2 */
@@ -1176,7 +1178,7 @@
<0xa0351000 0x1000>, /* DSI link 1 */
<0xa0352000 0x1000>, /* DSI link 2 */
<0xa0353000 0x1000>; /* DSI link 3 */
- interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
<&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
<&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
@@ -1190,7 +1192,7 @@
cryp@a03cb000 {
compatible = "stericsson,ux500-cryp";
reg = <0xa03cb000 0x1000>;
- interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
clocks = <&prcc_pclk 6 1>;
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index c3987ad..6f72075 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -22,13 +22,13 @@
button@139 {
/* Proximity sensor */
- gpios = <&gpio6 25 0x4>;
+ gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
linux,code = <11>; /* SW_FRONT_PROXIMITY */
label = "SFH7741 Proximity Sensor";
};
button@145 {
/* Hall sensor */
- gpios = <&gpio4 17 0x4>;
+ gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
linux,code = <0>; /* SW_LID */
label = "HED54XXU11 Hall Effect Sensor";
};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 55f9d0c..fc5e8ce 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -24,13 +24,13 @@
button@139 {
/* Proximity sensor */
- gpios = <&gpio6 25 0x4>;
+ gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
linux,code = <11>; /* SW_FRONT_PROXIMITY */
label = "SFH7741 Proximity Sensor";
};
button@145 {
/* Hall sensor */
- gpios = <&gpio4 17 0x4>;
+ gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
linux,code = <0>; /* SW_LID */
label = "HED54XXU11 Hall Effect Sensor";
};
@@ -93,14 +93,15 @@
/* Accelerometer */
compatible = "st,lsm303dlh-accel";
st,drdy-int-pin = <1>;
+ drive-open-drain;
reg = <0x18>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_tvk_mode>;
interrupt-parent = <&gpio2>;
- interrupts = <18 IRQ_TYPE_EDGE_RISING>,
- <19 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>,
+ <19 IRQ_TYPE_EDGE_FALLING>;
};
lsm303dlh@1e {
/*
@@ -118,14 +119,15 @@
/* Accelerometer */
compatible = "st,lis331dl-accel";
st,drdy-int-pin = <1>;
+ drive-open-drain;
reg = <0x1c>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_tvk_mode>;
interrupt-parent = <&gpio2>;
- interrupts = <18 IRQ_TYPE_EDGE_RISING>,
- <19 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>,
+ <19 IRQ_TYPE_EDGE_FALLING>;
};
ak8974@0f {
/* Magnetometer */
@@ -216,7 +218,7 @@
/* Accelerometer interrupt lines 1 & 2 */
tvk_cfg {
pins = "GPIO82_C1", "GPIO83_D3";
- ste,config = <&gpio_in_pd>;
+ ste,config = <&gpio_in_pu>;
};
};
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index b0278f4..ece222d 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -18,7 +18,7 @@
/ {
gpio_keys {
button@1 {
- gpios = <&tc3589x_gpio 7 0x4>;
+ gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>;
};
};
@@ -68,12 +68,12 @@
// External Micro SD slot
sdi0_per1@80126000 {
- cd-gpios = <&tc3589x_gpio 3 0x4>;
+ cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
};
vmmci: regulator-gpio {
- gpios = <&tc3589x_gpio 18 0x4>;
- enable-gpio = <&tc3589x_gpio 17 0x4>;
+ gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
};
pinctrl {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 149a72e..45d7af3 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -20,12 +20,12 @@
soc {
// External Micro SD slot
sdi0_per1@80126000 {
- cd-gpios = <&gpio2 31 0x4>; // 95
+ cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
};
vmmci: regulator-gpio {
- gpios = <&gpio0 5 0x4>;
- enable-gpio = <&gpio5 9 0x4>;
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
};
pinctrl {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 08f8207..36e84ef 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -50,35 +50,35 @@
wakeup-source;
linux,code = <2>;
label = "userpb";
- gpios = <&gpio1 0 0x4>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
button@2 {
debounce_interval = <50>;
wakeup-source;
linux,code = <3>;
label = "extkb1";
- gpios = <&gpio4 23 0x4>;
+ gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
};
button@3 {
debounce_interval = <50>;
wakeup-source;
linux,code = <4>;
label = "extkb2";
- gpios = <&gpio4 24 0x4>;
+ gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
};
button@4 {
debounce_interval = <50>;
wakeup-source;
linux,code = <5>;
label = "extkb3";
- gpios = <&gpio5 1 0x4>;
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};
button@5 {
debounce_interval = <50>;
wakeup-source;
linux,code = <6>;
label = "extkb4";
- gpios = <&gpio5 2 0x4>;
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
};
};
@@ -88,7 +88,7 @@
pinctrl-0 = <&gpioled_snowball_mode>;
used-led {
label = "user_led";
- gpios = <&gpio4 14 0x4>;
+ gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
@@ -155,8 +155,8 @@
vmmci: regulator-gpio {
compatible = "regulator-gpio";
- gpios = <&gpio7 4 0x4>;
- enable-gpio = <&gpio6 25 0x4>;
+ gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
@@ -182,8 +182,7 @@
pinctrl-0 = <&sdi0_default_mode>;
pinctrl-1 = <&sdi0_sleep_mode>;
- cd-gpios = <&gpio6 26 0x4>; // 218
- cd-inverted;
+ cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
status = "okay";
};
generated by cgit v0.10.2 at 2024-08-13 07:23:47 (GMT)