Merge tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux into next/dt

This pull request contains the DT changes for BCM2835 in 4.4.  It
pulls in clk/clk-bcm2835 (which Stephen Boyd has said would be stable)
because the DT changes to enable the clock driver need the driver
itself to be present. These changes include the following:

- Eric Anholt, moves the bcm2835 clock driver under bcm/ where it belongs with
  other Broadcom clock providers drivers, defines the binding for new clock
  driver, adds support for programming the BCM2835 audio domain, adds the DDC I2C
  controller to Device Tree, and finally migrates the Device Tree to use the new
  clock driver binding

- Lubomir Rintel adds support for the Raspberry Pi Model A+ and B revision 2, and
  remove the I2S controller which is non-existent on Raspberry Pi Model B

- Stefan Wahren adds an uart0 label for referencing the UART adapter

* tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux:
  ARM: bcm2835: Add the DDC I2C controller to the device tree.
  ARM: bcm2835: Switch to using the new clock driver support.
  ARM: bcm2835: dt: Add Raspberry Pi Model A+
  ARM: bcm2835: dt: Add Raspberry Pi Model B rev2
  ARM: bcm2835: dt: Raspberry Pi Model B had no I2S
  ARM: bcm2835: add label for uart0
  clk: bcm2835: Add support for programming the audio domain clocks
  clk: bcm2835: Add binding docs for the new platform clock driver.
  clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.

Signed-off-by: Olof Johansson <olof@lixom.net>

6 files changed, 100 insertions, 33 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5e0ff9..1a8d799 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -58,7 +58,9 @@ dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-b-plus.dtb
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
new file mode 100644
index 0000000..b2bff43
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 0000000..eab8b591
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	leds {
+		act {
+			gpios = <&gpio 16 1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index ee89b79..ff6b2d1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -13,11 +13,5 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
-
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
+	pinctrl-0 = <&gpioout &alt0 &alt3>;
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index ab5474e..3572f03 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -52,6 +52,10 @@
 	clock-frequency = <100000>;
 };
 
+&i2c2 {
+	status = "okay";
+};
+
 &sdhci {
 	status = "okay";
 	bus-width = <4>;
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 301c73f..aef64de 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,4 +1,5 @@
 #include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
 #include "skeleton.dtsi"
 
 / {
@@ -21,6 +22,10 @@
 			compatible = "brcm,bcm2835-system-timer";
 			reg = <0x7e003000 0x1000>;
 			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
 			clock-frequency = <1000000>;
 		};
 
@@ -57,6 +62,17 @@
 			reg = <0x7e100000 0x28>;
 		};
 
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives everything from the platform's
+			 * oscillator.
+			 */
+			clocks = <&clk_osc>;
+		};
+
 		rng@7e104000 {
 			compatible = "brcm,bcm2835-rng";
 			reg = <0x7e104000 0x10>;
@@ -92,11 +108,13 @@
 			#interrupt-cells = <2>;
 		};
 
-		uart@7e201000 {
+		uart0: uart@7e201000 {
 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
 			reg = <0x7e201000 0x1000>;
 			interrupts = <2 25>;
-			clock-frequency = <3000000>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
 			arm,primecell-periphid = <0x00241011>;
 		};
 
@@ -115,7 +133,7 @@
 			compatible = "brcm,bcm2835-spi";
 			reg = <0x7e204000 0x1000>;
 			interrupts = <2 22>;
-			clocks = <&clk_spi>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -125,7 +143,7 @@
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -135,7 +153,7 @@
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
 			status = "disabled";
 		};
 
@@ -143,7 +161,17 @@
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -165,28 +193,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		clk_mmc: clock@0 {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clock@3 {
 			compatible = "fixed-clock";
-			reg = <0>;
+			reg = <3>;
 			#clock-cells = <0>;
-			clock-output-names = "mmc";
-			clock-frequency = <100000000>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
 		};
 
-		clk_i2c: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-output-names = "i2c";
-			clock-frequency = <250000000>;
-		};
-
-		clk_spi: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-output-names = "spi";
-			clock-frequency = <250000000>;
-		};
 	};
 };