Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC low-priority fixes from Olof Johansson:
 "A set of fixes for various platforms that weren't considered bad
  enough to include in 3.12 (nor -stable).  Mostly simple typo fixes,
  etc"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: irq, AM33XX add missing register check
  ARM: OMAP2+: wakeupgen: AM43x adaptation
  ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected
  ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board
  ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards
  ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards
  ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250
  ARM: rockchip: remove obsolete rockchip,config properties
  ARM: rockchip: fix wrong use of non-existent CONFIG_LOCAL_TIMERS
  ARM: mach-omap1: Fix omap1510_fpga_init_irq() implicit declarations.
  ARM: OMAP1: fix incorrect placement of __initdata tag
  ARM: OMAP: remove deprecated IRQF_DISABLED
  ARM: OMAP2+: throw the die id into the entropy pool

7 files changed, 40 insertions, 48 deletions

diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 382d8c7..46378fe 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -192,7 +192,12 @@
 				};
 
 				buck1_reg: BUCK1 {
-					regulator-name = "VDD_ARM_1.2V";
+					/*
+					* HACK: The real name is VDD_ARM_1.2V,
+					* but exynos-cpufreq does not support
+					* DT-based regulator lookup yet.
+					*/
+					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <950000>;
 					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 1c164f2..63cc571 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -290,7 +290,12 @@
 				};
 
 				varm_breg: BUCK1 {
-				     regulator-name = "VARM_1.2V_C210";
+				     /*
+				      * HACK: The real name is VARM_1.2V_C210,
+				      * but exynos-cpufreq does not support
+				      * DT-based regulator lookup yet.
+				      */
+				     regulator-name = "vdd_arm";
 				     regulator-min-microvolt = <900000>;
 				     regulator-max-microvolt = <1350000>;
 				     regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 889cdad..d2e3f5f 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -350,3 +350,7 @@
 		status = "okay";
 	};
 };
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 724a22f..9a49e68 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -210,21 +210,21 @@
 			samsung,pins = "gpa0-2", "gpa0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_hs_bus: i2c2-hs-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart2_data: uart2-data {
@@ -238,21 +238,21 @@
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_hs_bus: i2c3-hs-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart3_data: uart3-data {
@@ -273,14 +273,14 @@
 			samsung,pins = "gpa2-0", "gpa2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpa2-2", "gpa2-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@
 			samsung,pins = "gpb3-0", "gpb3-1";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c1_hs_bus: i2c1-hs-bus {
 			samsung,pins = "gpb3-2", "gpb3-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@
 			samsung,pins = "gpd0-2", "gpd0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		dp_hpd: dp_hpd {
 			samsung,pins = "gpx0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -649,42 +649,42 @@
 				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c2_bus: cam-i2c2-bus {
 			samsung,pins = "gpe0-6", "gpe1-0";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi1_bus: cam-spi1-bus {
 			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c1_bus: cam-i2c1-bus {
 			samsung,pins = "gpf0-2", "gpf0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c0_bus: cam-i2c0-bus {
 			samsung,pins = "gpf0-0", "gpf0-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi0_bus: cam-spi0-bus {
 			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_bayrgb_bus: cam-bayrgb-bus {
@@ -695,7 +695,7 @@
 				       "gpg2-0", "gpg2-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_port_a: cam-port-a {
@@ -704,7 +704,7 @@
 				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -756,7 +756,7 @@
 				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		c2c_txd: c2c-txd {
@@ -766,7 +766,7 @@
 				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 5b22508..777fb1c 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,sd5v1", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ede7727..a7cb848 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	spi_0: spi@D0000 {
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 56bfac9..98f3597 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -191,17 +191,14 @@
 				uart0_xfer: uart0-xfer {
 					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_cts: uart0-cts {
 					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_rts: uart0-rts {
 					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -209,17 +206,14 @@
 				uart1_xfer: uart1-xfer {
 					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_cts: uart1-cts {
 					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_rts: uart1-rts {
 					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -227,7 +221,6 @@
 				uart2_xfer: uart2-xfer {
 					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 				/* no rts / cts for uart2 */
 			};
@@ -236,44 +229,36 @@
 				uart3_xfer: uart3-xfer {
 					rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_cts: uart3-cts {
 					rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_rts: uart3-rts {
 					rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd0 {
 				sd0_clk: sd0-clk {
 					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cmd: sd0-cmd {
 					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cd: sd0-cd {
 					rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_wp: sd0-wp {
 					rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus1: sd0-bus-width1 {
 					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus4: sd0-bus-width4 {
@@ -281,34 +266,28 @@
 							<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd1 {
 				sd1_clk: sd1-clk {
 					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cmd: sd1-cmd {
 					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cd: sd1-cd {
 					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_wp: sd1-wp {
 					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus1: sd1-bus-width1 {
 					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus4: sd1-bus-width4 {
@@ -316,7 +295,6 @@
 							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 		};