Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull second set of media updates from Mauro Carvalho Chehab:
 "Despite its size, most of the stuff here is trivial.  This series
  contains:

   - s5p-mfc: additions at the driver and at the core to support H.264
     hardware codec;
   - Some improvements at s5p and davinci embedded drivers;
   - Some V4L2 compliance fixes applied on a few drivers;
   - Several random trivial patches, including several fixes and a few
     new board support additions;

  Notes:

   1) Some Exynos media patches were dependent on some -arm fixes that
      got merged on changeset 782cd9e.  That's why this pull request is
      based that changeset.

   2) As promised, I reviewed the pending VB2 DMABUF series.

      While setting a test environment, it was noticed that the upstream
      support for Samsung Exynos 4 boards (smdk310 and Origen) are
      broken upstream, likely due to regressions: both defconfigs are
      wrong and regulator settings for both boards are broken.  That,
      allied with some bug at the dummy regulator driver, causes OOPSes
      during boot time.

      Long story short: even fixing the above, the proposed patches
      OOPSed when running the DMABUF test.  Not sure yet if the OOPSes
      are due to some other undetected regressions, or due to some bug
      on the patches.

      Due to the above, DMABUF patches for vb2 got NACKed for 3.7."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits)
  [media] m5mols: Add missing #include <linux/sizes.h>
  [media] stk1160: Add support for S-Video input
  Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check"
  [media]  dvb: LNA implementation changes
  [media] v4l2-ioctl: fix W=1 warnings
  [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID
  [media] omap3isp: Fix compilation error in ispreg.h
  [media] rc-msi-digivox-ii: Add full scan keycodes
  [media] cx25821: testing the wrong variable
  [media] tda18271-common: hold the I2C adapter during write transfers
  [media] ds3000: add module parameter to force firmware upload
  [media] drivers/media: Remove unnecessary semicolon
  [media] winbond: remove space from driver name
  [media] iguanair: cannot send data from the stack
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] dvb-usb: print small buffers via %*ph
  [media] uvc: Add return code check at vb2_queue_init()
  [media] em28xx: Replace memcpy with struct assignment
  [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER
  [media] mem2mem_testdev: Use devm_kzalloc() in probe
  ...

Conflicts:
	arch/arm/mach-davinci/include/mach/da8xx.h

3 files changed, 6 insertions, 12 deletions

diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 85fc2fe..c05d7aa 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -378,10 +378,10 @@ static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
 };
 static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
 	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
 	REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
@@ -1180,9 +1180,7 @@ static struct platform_device cam_8m_12v_fixed_rdev = {
 static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 	.clk_rate	= 166000000UL,
 	.lanes		= 2,
-	.alignment	= 32,
 	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
 };
 
 #define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
@@ -1226,7 +1224,6 @@ static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
 		.bus_type	= FIMC_MIPI_CSI2,
 		.board_info	= &m5mols_board_info,
 		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
 	},
 };
 
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index c11a62e..9adf491 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -97,12 +97,12 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 };
 
 static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
 };
 static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
 	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 08b81fd..ebc9dd3 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -209,7 +209,7 @@ static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
 	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
 };
 
 static struct regulator_init_data lp3974_ldo3_data = {
@@ -273,7 +273,7 @@ static struct regulator_init_data lp3974_ldo6_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
 };
 
 static struct regulator_init_data lp3974_ldo7_data = {
@@ -942,9 +942,7 @@ static struct platform_device cam_s_if_fixed_reg_dev = {
 static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 	.clk_rate	= 166000000UL,
 	.lanes		= 2,
-	.alignment	= 32,
 	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
 };
 
 #define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
@@ -1008,7 +1006,6 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
 		.board_info	= &m5mols_board_info,
 		.i2c_bus_num	= 0,
 		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
 	},
 };